NV4500 tear down.Customer brought in for 5th gear noise, and it is worse than just 5th gear.
Пікірлер: 331
@Justins00ss Жыл бұрын
So happy to see you back! Nothing but love and well wishes for Richard and Teresa
@richardteresacricheducatio3542 Жыл бұрын
Excited to be back thank you for your support
@Apolloneek Жыл бұрын
Dude you have no idea how happy I am they are back. Thanks rich and Teresa ! Sorry you guys even had to stop but glad to see ya back
@josephd.4890 Жыл бұрын
ive been cheching the old channel every few months hoping, this video popped up randomly and Happy Dance!!!
@robertwriser78846 ай бұрын
@@richardteresacricheducatio3542where exactly are y’all located and how much does a rebuild like this go for. My 3rd gear grinds unless you double clutch or float it goin in and it is difficult to even get the truck into gear sometimes. As well as 4gear makes a scratching noice while getting up to speed.
@cdpperformance26132 ай бұрын
@@richardteresacricheducatio3542 I have a 96 dodge ram 3500 with the same nv4500 2wd trans had it built with new main shaft about 25k ago shop but the wrong fluid in it! And I put about 100 miles on it before i caught it 3rd gear has always grind since.. what’s a good rebuild kit to go with ? I’m really wanting to pull and just build it at my shop..
@michaelwallace3105 Жыл бұрын
Nice to see a manual transmission teardown for a change. Like to see more of that. Take care of that shoulder!
@infinity3jif Жыл бұрын
Woah, I thought I'd never see this guy again. I'm glad their channel found me. It was just sitting over there in my recommended section and I clicked so damn fast🤣🤣
@richardteresacricheducatio3542 Жыл бұрын
We are excited that you found us too we are excited to be back thank you for your Support
@zachgarris3773 Жыл бұрын
Big thank you to whoever got richard to come back and educate us. Listen close to him, his knowledge shaved 2 tenths of my ride. Thanks Richard
@floydhenry2262 Жыл бұрын
great to see you guys back. U-Tube has been so boring without you guys. I wish you well in your new venturecan't wait to meet you in person.
@DasLuftVolks Жыл бұрын
Been missing you Richard!!! Thought the worst when videos stopped but glad to see all is well and drama free. Seems like kids these days gotta learn the hard way, hope he grows up before too long.
@teamgrizzly2859 Жыл бұрын
What happened?
@denchru60558 ай бұрын
@@teamgrizzly2859 Trent (Richard's son) started the old KZfaq channel and Richard got greedy and wanted all the money for himself. So he fired Trent and now Richard has everything he wanted. His shop and KZfaq
@markusedma Жыл бұрын
This is fantastic to see a video! All us fans were so sad not to watch you in action. Much love you two!❤❤
@trojanyacht2518 Жыл бұрын
went to Roswell last month for a new great grand daughter, asked google maps for directions to Precision trans in Amarillo, said permanently closed, so disappointed I didnt get to meet you. Been a mechanic since 1970, still work at home on church friends cars since i retired, put i a bendpak 10k lift at home. Keep on keeping on and God bless you and wife. Praying for you and shoulders, i had rotator cuff surgery on both. Now can do most anything within reason Keep the faith Richard!
@truthboomertruthbomber5125 Жыл бұрын
Teresa, I am truly impressed that you could identify the cage of the pilot bearing!! You are awesome!
@richardteresacricheducatio3542 Жыл бұрын
Smart woman right there she’s a keeper R
@allenbrown7820 Жыл бұрын
Glad to see you putting videos back up. Missed watching you spread your wealth of knowledge. Best of luck to Teresa and you on the new venture! Be Safe!
@mjh123crh Жыл бұрын
Awesome to see you 2 beautiful people back at the videos... I loved watching and learning from you...
@fourfortyroadrunner6701 Жыл бұрын
Richard I'm 74. Spent 3 months to the end of Nov last year converting my 01 2WD Cummins Ram to 4WD. Swap frame, tear down NV4500, and tore apart two transfer cases to swap shafts. Then rebuild the front axle. That NV was the hardest thing I've ever done. HEAVY.
@gillboardman8998 Жыл бұрын
So good to have Richard and Teresa back! Made my week🤙 This is Gill from Washington, you rebuilt my big, blue Roadmaster Wagon 4L60E last year and I gave you the Steve Morris "The Wagon" shirt. Let's see it!😁👍 Any chance you can upload the rebuild vid of my tranny? Still running fantastic. Definitely SUBSCRIBED!
@hayzersolar Жыл бұрын
awesome new videos great to have you back
@koldphuzhun Жыл бұрын
I just found this channel after missing the Precision Transmission channel. So excited to see videos coming again! Good to see the two of you back again! You were missed until now.
@kenuber4014 Жыл бұрын
Well look who is back!! Good to see you guys again. I see the name has changed, but the same characters. Hope all is well.
@donaldsingleton2161 Жыл бұрын
Great to see you an Ms. T back. These videos you do help refresh a old man's mine .😊 God Bless you two.
@TeemarkConvair11 ай бұрын
great to see you back; this brought back memories of 1972 when i was young n foolish and dove into a Muncie 4 with a Motor Manual and a carton of Chevy parts and with the help of wifes oven and the freezer and a block of 2x4 rebuilt it,, dang input shaft needle bearing had me swearing!! but, thats how ya learn,,😆 cool to see that monster bucket of steel, had to be a chore with you shoulder..
@billiebobthemechanic Жыл бұрын
Seems like there was some drama between you and the kid there at the end of the last channel. Glad I found your new channel. You’ve helped me out more than a few times digging into some 4l80’s and 4l60’s. Very Knowledgeable.
@diverducker29849 ай бұрын
Been watching your old channel and hoping you would come back I checked every month or two I never knew you made a new one glad you’re back.
@anthonyeastham7960 Жыл бұрын
It sure is good to see you guys on here again! You all provide more and better info than any other channel. Wishing you all the best.
@aw9680 Жыл бұрын
Richard! So good to see you back in front of the camera! It took KZfaq 4 months to get you into my feed. I'm so excited to see you share your knowledge. Don't be afraid to cover stuff you had on the old channel. Even after watching as many of your 4l60 tear downs, I am still riveted by your presentations. Glad you're back!
@davidnightingale2260 Жыл бұрын
It’s fantastic to see you back, I really love watching your videos and have learned a lot from you. You have a wealth of experience and knowledge that not many people are willing to share. I hope this is the start of more good things to come.
@shack_67 Жыл бұрын
Nice to see you back Richard
@ozzyfranf Жыл бұрын
Glad to see you're back!!!
@jandsmarineservicejimfromd4994 Жыл бұрын
Very happy to see you guys again! Missed watching your videos
@kmack747 Жыл бұрын
So glad to see the master back i have been going through withdrawal from your excellent transmission videos
@adamcarpenter51907 ай бұрын
First time viewer! The shim rings between the 5th gear and bearing at 11:17 are to properly space the bearing so the gears have the right amount of play/tolerance in the trans :)
@Chris-ey6rn Жыл бұрын
So happy to see you are back . Being a truck driver for a living you have helped me pass a lot of down time waiting . I hope all is good with the family ❤
@roarkfabworks Жыл бұрын
Love learning new things from you Richard. Very happy to see your videos again. Keep up the great work.
@lamontwells84946 ай бұрын
Miss you guys . I glad the new channel found me. We need you Teresa and richard
@dgmcke3074 Жыл бұрын
Wow! Wizard at Manuel transmissions too!!
@heatherfawkes4759 Жыл бұрын
Welcome back missed your great videos.
@kenmurray4232 Жыл бұрын
Just found you again tonight. Glad to see you back Richard. I have learned a lot from you & look forward to learning more, even at 68 yrs old. Nice to hear your voice Theresa & to see Annie.
@carltonlane8931 Жыл бұрын
Brilliant we missed you both.
@michaelwells855911 ай бұрын
Love your videos. I watch them over and over. Did the same repairs to mine, lost 5th gear. You call those parts dogs, I usually call them keys.
@edwardmyers1746 Жыл бұрын
Holy crap!!! Good morning Richie! Just woke up 5AM eating breakfast and saw this, what a treat! The big guy it back in town, god bless.
@richardteresacricheducatio3542 Жыл бұрын
We are excited that you found Thank you for your support we are excited to be back
@ODGColornChrome Жыл бұрын
Glad you're back Richard. Sorry about wharever happened in your fam.
@cuttnhorse2013 Жыл бұрын
I’m so glad to see you all. I must have missed what happened to you all? Ronnie, East Tennessee
@chipper442 Жыл бұрын
Happy to see you walk in with the gloves on, those used oils and chemicals wreak havoc on the nervous system. Thanks for another great tutorial. You’d make a great shop teacher.
@franksprecisionguesswork501 Жыл бұрын
Welcome back! Welcome back! Welcome back! I’m very glad to see you here!
@richardteresacricheducatio3542 Жыл бұрын
Thank you very much we’re excited to be back thank you for your support
@joelrugg Жыл бұрын
Real happy to see you all again I’m rebuilding my first 4l60e thanks to you all❤❤
@MrRee-kn4xd Жыл бұрын
Oh my goodness I'm so happy this popped up in my recommended videos! It's so great to see you back!
@davidknowles2024 Жыл бұрын
nice to see you back i miss you hope you are well
@dgmcke3074 Жыл бұрын
I learn something with every video-so glad ur back
@jamesg6792 Жыл бұрын
Welcome back. You are the undisputed King of transmissions!
@mikepickett3277 Жыл бұрын
This has made my day. So happy you and Theresa are back. Boy I can’t wait..
@carltonlane8931 Жыл бұрын
Great to see the both of you,hope your new channel,work shop works out,I’m over the pond,but your videos are so informative,and this time try not to splash the wife,we all wish you all the very best.
@gszytk2571 Жыл бұрын
So happy your back!
@bill8by5 Жыл бұрын
Richard & Teresa, so very happy to see you folks back on here. Have been missing That voice talking about Transmissions!!!! Much Love and respect from Galveston!!!
@haroldhawkins9370 Жыл бұрын
Glad that you're back to doing videos, miss you're experience on the transmissions.
@greenbudkelly2820 Жыл бұрын
Nice to see you again
@davidlittle9010 Жыл бұрын
I’m so happy to see you guys! Welcome back.
@davidmashburn6890 Жыл бұрын
I’m glad to see back Richard I’ve missed your videos so much
@williamgreen236410 ай бұрын
Thank yall both for your efforts in educating anyone willing to learn about these great trucks and transmissions. Some of us have no choice but to work on our own vehicles especially in this economy. It really helps to have solid information
@robertlawson4742 Жыл бұрын
Great to see you guys back. Love your videos
@richardteresacricheducatio3542 Жыл бұрын
Thank you for your support we are excited to be back
@coltlewis5871 Жыл бұрын
Nice video guys 👍. I’ve rebuilt a lot of manual transmissions and I always end up glaring at it for quite sometime to remember how it all works. They’re a bit of a mind warp and it’s really cool how they work. I’m surprised you can even get parts anymore, even 10 years ago it was difficult. Even the fluid can be difficult and it’s extremely expensive. The NV4500 is a strong transmission though, 5th gear and synchronizers being the weak points. Cast iron case, hard to throw around even with good shoulders. Glad you guys are still doing your thing 😎
@richardteresacricheducatio3542 Жыл бұрын
You’re definitely gonna shop around for parts Thank you for watching
@cavemanjoe79 Жыл бұрын
AMSOIL makes a GL-4 75W-90 gear oil for manual transmissions.
@coltlewis5871 Жыл бұрын
@@cavemanjoe79 Good to know! Thank you 👍
@12ValveJalopy Жыл бұрын
Redline MT-85 is correct for the NV4500 and is fairly available, not super cheap, but not exorbitant either.
@ShaneRSR Жыл бұрын
YES HES BACK🎉🎉🎉🎉❤
@gdeisinger565810 ай бұрын
Took me forever too track you down! Glad I found your new channel and your doing good. I really enjoy watching your Videos.
@pbee73 Жыл бұрын
Wow, glad you are back Richard and was always wanting to see you do a vid with a manual transmission.
@Mnt2ride Жыл бұрын
Good heavens I was wondering where you went! Good to see your back
@Thundarr995 Жыл бұрын
Yeah, I never thought drive shaft yokes really wore out. I did a NP 242 transfer case swap on my 96 5.2L ZJ about a year ago. It's 97 XJ 242 with the external output shaft. I had the driveshaft shortened, and I used a wrecking yard yoke. After about 6 months, I started getting a slight vibration. The U joints were fine, so I took it back down to the shop to see if the shaft was slightly bent or possibly out of balance? Nope, the splines were just worn. They didn't look worn to me, but I bought a new yoke, and they even installed the new yoke on the driveshaft for me for free. I had my doubts that was the problem, but it was. Vibration went away & it's all good again.
@repairitdontreplaceit Жыл бұрын
yay , welcome back guys . we have missed you so mutch
@darrylmonat5361 Жыл бұрын
Glad I found you again! Loved your previous channel, but things change. I see new shop? You moved? Gotta lookup previous video's to catch up.
@damanifesto Жыл бұрын
Dang I've got a 1997 GMC K3500, 5 speed 7.4L with a fifth gear whine. 109,000 miles. Thanks for doing this video.
@brjr2009 Жыл бұрын
Welcome back!! I missed you all so much! Thank you!
@richardteresacricheducatio3542 Жыл бұрын
Thank you for your support we are excited to be back
@capnskiddies Жыл бұрын
A warm welcome on your return
@rizza7575 Жыл бұрын
nice to see you back
@keithreilly386 Жыл бұрын
I learn something every time I watch a video from you . Glad you are doing these you are the best
@richardteresacricheducatio3542 Жыл бұрын
Thank you for your support
@Whisper555 Жыл бұрын
I'm glad to see you and Teresa back Richard. I was wondering why "Precision Transmission" just suddenly stopped showing up. Guess you are here now. Hope you are keeping well? All my best to you all.
@fourfortyroadrunner6701 Жыл бұрын
NICE to see you guys BACK!!!
@hugieflhr03 Жыл бұрын
Always great information and tips from the professional!!!
@arch953 Жыл бұрын
Great to see you back!!
@gbowne1 Жыл бұрын
Really glad to see you back. Best wishes for you both Richard & Teresa :) Always enjoyed your videos.
@jmstew642 Жыл бұрын
Good to see you folks back. Love your content..!
@richwielechowski5191 Жыл бұрын
Great to see you back posting videos! Good luck in the future!
@s0lidgoat199 Жыл бұрын
I’m so upset it’s takin me this long to find y’all again, glad to see you back you have no idea
@redruuum75 Жыл бұрын
Welcome back! We've all been waiting. Instant subscribe.
@richardteresacricheducatio3542 Жыл бұрын
We are excited that you found us we are excited to be back
@edgardocuevas61645 ай бұрын
Nice i was wondering why you weren't uploading great to have you back giving us great content
@robertmedina6875 Жыл бұрын
New sub here. Worked on cars for more than 25years. This old Dogg wants to learn new tricks lol. AWESOME VIDEO!!! Thank you!!!
@richardteresacricheducatio3542 Жыл бұрын
We’re excited that you found us we’re excited to be back
@kgindustries2937 Жыл бұрын
Great to see you back on YT. I was starting to forget how transmissions work.
@petepeabody8905 Жыл бұрын
Richard and Teresa, Wow. Just take care of that shoulder. I know your drive to get things done is there, but Teresa make sure you keep him in check for now. It's great to see a master at his craft at work, both you and your wife. Thank you for bringing us along.....Pete
@richardteresacricheducatio3542 Жыл бұрын
Thank you very much is coming up pretty quick and we’re getting prepared for it and I will stay tuned video coming
@domenicomonteleone3055 Жыл бұрын
@@richardteresacricheducatio3542 Richard i love following you from # YSW 🇨🇦 beacuse of the time you take to explain what you are doing experience is necessary excellent work Richard hi 👋 from 🇨🇦
@domenicomonteleone3055 Жыл бұрын
@@richardteresacricheducatio3542 you Both Rock 🎸 hi 👋 from # YSW 🇨🇦 respect back to you I want to learn more about building high Performance Transmissions from you Richard beacuse you have a very High Standard and work ethic respect back to you both 👏 👍 😉 do you have any new videos 📹 !!
@jonlamkin6108 Жыл бұрын
I'm so glad to see your back!!!! I hope that in the future we can do buss together!!
@thecookmeister Жыл бұрын
Welcome back. Missed you!
@johnsullivan3623 Жыл бұрын
Great to see you back....love it...hope all it well
@rubicc Жыл бұрын
Glad to have found you again! Welcome back!!!
@erik149 Жыл бұрын
Great to see you back, missed you guys.
@dansmith-kd8wz Жыл бұрын
Welcome back dude…happy to see you again. Plz keep the vids coming.
@therealxunil2 Жыл бұрын
Oh yeah! Richard is the MAN.
@camneilsen8234 Жыл бұрын
Thanks for coming back 👍🏻
@chrismclean712 Жыл бұрын
Glad you are back!
@dalleymonroe3836 Жыл бұрын
It’s nice to see you back. I’ve been waiting for a dodge nv4500 to come through your shop because I got one that’s stuck in fourth gear. I’ve wanted to see what I was into before I got into it from what you was saying it looks like I’ll be sending mine out to get fixed.
@paulblais8481 Жыл бұрын
So glad your back, Missed your videos. Can you do one on the A4LD Transmission.
@jamessebastian9822 Жыл бұрын
Bout damn time you got your azz back up and running. Looking healthy 😁
@richardteresacricheducatio3542 Жыл бұрын
Thank you very much
@nickcucchiara Жыл бұрын
It's good to see you again as it's been a while! Just found this channel and happy to subscribe as you do excellent work!
@jeremyking5684 Жыл бұрын
You sure are a master! I've had 2 left shoulder surgeries and 1 right shoulder surgery, my left is still bad so I know what your talking about with shoulder problems. I've had both hands operated on and both elbows operated on.
@ericfaley9019 Жыл бұрын
I’ve did lots of those 5th gear nuts and gears under warranty at the Dodge dealership . The local transmission shops in the area used to weld the nut to the shaft. Bad idea if you had to service the internal parts. Good to see you back online.
@tommitchell7087 Жыл бұрын
Scrolling when I found your video, really missed you guys! Great to see you posting content!!
@petenikolic5244 Жыл бұрын
Hi Richard nice to see you got your channel missed some of it had a few major medical issues hope your well