▼EXPAND FOR LINKS TO THE TOOLS▼ Watch more Cool Tools videos here► kzfaq.info/sun/PL-gT7JMZFYjdW0383kgJVMj0ocXbLXtpQ *Tools recommended in this video:* - Milescraft 1219 Router Guide Set: amzn.to/3QQoImW - Bow Xtender Fence System: amzn.to/3Jwy2ba - M-Power SB2 Diamond Sharpening Set (USA): www.mpower-tools.com/product/sb2-double-diamond-sharpening-bench-stone-set-side-by-side-kit/ - M-Power SB2 Diamond Sharpening Set (UK): www.mpower-tools.co.uk/product/sb2-double-diamond-sharpening-bench-stone-set-side-by-side-kit/ - M-Power SB2 Diamond Sharpening Set (CANADA): www.mpower-tools.ca/product/sb2-double-diamond-sharpening-bench-stone-set-side-by-side-kit/ - iGaging WZ Digital Miter Gauge: www.chipsfly.com/EZ-Digital-Miter-Gauge_p_272.html - ISOtunes Air Defender AM/FM/BT (Until 5/26/24 Get 20% off with this link or with discount code “AMFMBT20”): shop.isotunes.com/AMFMBT20 - Whiteside Ultimate Flush Trim Bits: 2-1/8 inch long, dual bearings: amzn.to/3wCMZWD 1-5/8 inch long, dual bearings: amzn.to/3V4E3mb 1-3/8 inch long, dual bearings: amzn.to/3WTAzEe 2-1/8 inch long, end bearing: amzn.to/4assRnK 1-3/8 long, end bearing: amzn.to/4bpEMnE - Blade Brush: amzn.to/4boFOAv - Saw Blade (and router bit) cleaner: amzn.to/3wETV5B (If you use one of these affiliate links, we may receive a small commission) (ISOtunes, iGaging, BOW, Whiteside and M-Power are partners of Stumpy Nubs Woodworking Journal) #ISOtunes #ISOtunesSport @isotunes @isotunessport 0:00 Chapters *My hand tool collection includes premium tools from Bridge City Tool Works:* bridgecitytools.com/ *Please help support us by using the link above for a quick look around!*

Dang it, every time I watch one of your videos I end up needing to buy more tools. Thanks Stumpy.

As a fellow glasses wearing human I’d love a recommendation for safety glasses if you have a set that you like enough to recommend. I’ve tried several with very poor fit and discomfort. I’d also like to thank you for this series as my shop fills up with more amazing tools after every video lol. Thanks for all you do. Cheers 🍻

"I'm convinced you'll be able to find something in the video that will better your shop." I completely agree! ...I just can't ever afford it 😢

I'm digging the beard.

That is a mighty handsome beard. Maybe talk about respirator/dust mask solutions for us bearded folk?

I can’t say enough about the Milescraft jig. I’ve always wanted a circle jig but put it off over and over. I started making lazy Susan’s and had other ideas that required circles. Other jigs require you buy two different versions, one for bigger circles and one for smaller. Milescraft came in under just one of the competitors. They’re not a fancy company but their stuff just works. Love them

CKLW!!! The Big 8

The slightly longer than normal hair is quite nice look on you! Love cool tools

Those router bits look amazing!

I don't do as much woodworking as I'd like, I live that dream through you. But i do run a small construction crew, and much of your shared knowledge carries over. I just ordered the Bow extension fence, and I think it'll help keep my guys safer using the job site saw, and give a nicer finished product. Thanks!

3-2-1 blocks are still the best find from cool tools. I use them more than my square or tape measure.

The digital miter gauge is intriguing, especially for the price, but I think it's worth pointing out that the manufacturer specs an accuracy of only +/-0.2 degrees. Which is good enough for many applications, but not for things like 6 or 8 sided frames, where any error is compounded by twice the number of joints. Oh, and it reads to the nearest 1/10th of a degree, not 1/100th as claimed in the video. The protractor used to measure the results also isn't accurate enough to discern a 1/10º difference.

Cool !!!

Tools! Cool 👍

I love this series but I think it's important that other folks do similar things - your format is sort of perfect, and while i always tend to align more towards your opinions, i'm glad that other channels that follow in your footsteps will bring their own opinions to the table.

I love cool tools. I never feel pressured to buy something like other tool review channels. I did purchase the BOW system for my jobsite saw after the last video. I can hardly wait to install it! Thanks Stumpy for always finding good products.

I have been eyeing that Milescraft circle jig for about a month and wondering if it was worth it. Thanks for your review! 👍

Thank you very much, James. We all know the miter gauges on contractor saws are notoriously bad. That's why I'm so excited about the I-Guaging miter Guage. I'm relatively sure I'll be ordering one today! Thanks again for all of the cool tools you showcased. They're all awesome. 😊😊😊😊❤❤❤❤

Thank you James! FYI I iurchased that ilescraft Circle Jig earlier this year and you're so right on! It's a great tool for an unbelieveable low price!!! Appreciate what you do fpr us James.

Wow! Thank you so much! I purchased this set on your recommendation and it works great! I'm a newbie when it comes to sharpening, so this made it easy and way quicker than I thought. Less messy than my water stones. Lol Great deal too. I got an extra 10% off the sale price!

the best part of your posts. Brilliant. We need 1 every week.

THANK YOU for following up on your pledge to use safety guards and PPE in your videos where you can. Lead by example.

Just bought the head set. Thanks.

Thanks James.

I've been using that brush to clean my saw blades for months. They work great. I have two. Stole them from my wife's kitchen

I always learn so much from your videos thank you❤❤❤❤

Got the Bow Extender. For ripping long stuff, it's great.

I bought the router jig and the blade brush. As always, thanks for the recommendations.

Long time watcher, first time buyer. Picked up the circle jig, miter guide, and the bow system! Thanks for the great recommendations, currently retooling my classroom need ideas for easier to use items like these!

Stumpy keep producing these tool videos, l have been waiting for you to find a decent miter gauge thanks for your recommendations. You are a great teacher offering a lot of good wood working knowledge and experience.

Look at you, sneaking up on a million subscribers. You had barely 100k when I subscribed. I’m not saying it’s all my doing, you do a fine job. Cheers!

Thanks for sharing with us James , lots of good products there and fantastic ideas too. Really enjoy your cool tool series. Stay safe and keep up the great videos. Fred.

Love the beard, let it grow out longer and let your hair grow too. Art from Ohio

I never what to miss cool tools 👍👍

Might have to save up for those router bits.

The extended fence is a great idea. I have a home-made jig for that -- the infeed support is needed for larger stock.

Great stuff

I thought that Milescraft circle cutter set would be $200. It’s $44!😀👍

Lovely

Great looking tools.

I actually bought the Bow fence for my portable 10" DeWalt saw, and even swapped it to my older outdoor 10" Skil saw when cutting some rough lumber. This was by far the most useful purchase, only topped by the dust collection system.

Beard looks great!!

Selling tools is old yes you are right.

Added a few things to my wish list...

Nice video ,thanks for your time

Great tools as always. Thanks!! Let's see... 40 some cool tool videos at average of $150 spent.. Yeah, I'm OK with that 💵😊

Awesome. Thanks for this, I just ordered the Milescraft router guide set. have been looking for something like this, and it really sold me on the dual measure (as I grew up with Imperial, but now live in Japan and am 100% metric for precession measures). Looking forward to this. Many thanks! Scott from Japan

The Milescraft router guide was one purchase I was happy about. Used it several times.

Thanks

Fabulous ifo‼️👍👍

I would enjoy seeing some examples of your woodworking production.

While I hate the overused "game changer," I have to admit that the Bow fence is just that. I make rip cuts on my job site saw I might never have attempted before. Easily the best investment in my saw I've yet made, with the CMT blades as a close second. I'd advise those looking at the Xtender to get the 46 in. model in kit form; the feather boards are just the best.

Nice, I just randomly bought the Milescraft jig for a poker table I am building, love seeing I bought a quality setup. I only wish this video came out a couple of days ago so I could have used your affiliate link.

I've been window shopping miter gauges lately but just couldn't pull the trigger on any of them for the price being as it's just a weekend hobby for me. I'll gamble with $120 on the igage one though. I have a love/hate relationship with your cool tool videos. It always cost me money when you upload them but I do love a good tool.

I wish you would test the miter gauge a little differently. Cut a 0°, move away and back to 0°, flip your board and cut again. Then use a caliper to measure your width at each end.

I gotta add the hype for the bow fence. I use it on my bandsaw for re-saw. I have an older powermatic 72 which has a very large table and the fence is longer than the longest bow fence by 6 inches. Amazing for the bandsaw.

Mr. Nubs, I have a couple other milescraft jigs and I've been very pleased with the products

All good stuff. But the fence extender looks the most promising to be used in my shop. Thank you for sharing.🙂🙂

Love the cool tools episodes. And the beard looks good!

It’s disappointed you don’t have more kayaks.

Already have the Milescraft circle jig, but it’s nice to get your confirmation on my purchase. 👍🏻

Just ordered the circle cutting jig. Thanks.

I bought those hollow shaft bits you suggested a while back. They kick ass. Definitely feel like you mean it ehen you say you actually like the stuff.

I've had one of the Joseph Joseph knife brushes in my kitchen for years. Very effective and safe way to clean gunky blades. If I had a bandsaw I would definitely use one to clean the blade - great idea. If only my brush was in that cool green color!

I have the bow fence and all it’s accessories and it’s awesome

The Bow Xtender fence system is available here in Australia. It is sitting waiting for me at the Post Office when I get back from a vacation. I have several iGaging tools, if the mitre fence is available in Australia I'll be buying it. I think the beard looks good on you.

I agree 100% with your assessment of the BOW Xtender fence system. Due to my having to downsize both shop space, and stationary tool size, I was forced to abandon my General 350 table saw, which was positioned in one corner of a table measuring about 6’ by 7’. I ended up buying a Dewalt 7491 shop saw. I was surprise, pleasantly, by its accuracy, but was very apprehensive when using it, for the precise reasons named in this video. My fear was justified in Feb of 2023, when I kissed the blade with my left index finger…I was paying too much attention to controlling the wood while nearing the end of the cut. Lesson learned! I saw the Bow fence reviewed on another channel, and was very pleasantly surprised when it appeared in Canada, shortly thereafter. I purchased the 46” model AND 2 of the supports. What an instant and amazing difference. I cannot see myself ever using this saw without this fence setup. One bit of advice….for a shop saw of this size, definitely go with the 46” length. I would not be nearly as enthusiastic had I opted for the next shorter length. I don’t know about the standard fences on other brands of shop saws, but on this Dewalt, if you’re in the position of needing to buy clamps, you won’t go wrong with the Low-profile Track Saw Guide Clamps (item 13K1230) from Lee Valley. I just happened to already have a pair, tried them…thinking they probably wouldn’t have enough capacity….and presto….it’s as if they were designed for this setup. With the Bow fence attached, the only thing that protrudes from the backside of the Dewalt fence, is the 1/2” thickness of the black knob.

That's a brush people use to clean seat belts. If your seat belt doesn't retract fully or quickly, it's because it's covered with grime that makes it hard to retract onto itself.

I absolutely love my BOW fence. It's one of those accessories that truely lives up to the hype.

the mpower is one of the few things that also are labelled well, they were not ashamed to just print the type of stropping wax (blue/yellow) on the strops... I know if you use the thing regularly you do it right even unconscious but it's still SO handy for beginners and hobbyists :)

A nice selection! I find most broadcast stations I care to listen to have an app or a web page where you can stream their programming.

Very cool circle jig - cheaper that I expected

Great video love cool tools so glad to see another episode of it. So many great deals to check out. Thank for sharing James as always

I love the sharpening kit.

I really like my Bow extender fence. Don't forget to order the clamps that hold it to the fence as they are extra.

Thanks for producing such informative videos! I have a simple question about router table setup. In another video you mentioned using a digital measuring device in order to ensure that profile cuts on work pieces done at different times would match perfectly (such as for a picture frame). But duplicating such exact measurements would necessitate the profile bit being inserted to exactly the same depth in the router collet each time. Rather than inserting a bit until the shank bottoms out, I've seen many advise that bits should be raised slightly (1/16 to 1/8") before tightening the collet because the process of tightening collets draws the bit shank down into the collet and the collet cannot be fully tightened if the bit is already bottomed-out before tightening. May I ask your view on raising a bit slightly before tightening the collet?

Disappointed that it's not Keith Bow and Bill Xtender.

the digital mitre guage looks super sweet. My only worrry is that you said "seems to" when referring to this tool. The head seems to lock down well. The angle seems to be dead on. Does it lock down or not? Is it accurate or not? I make a bunch of picture frames every year and this SEEMS to be just what i need to up my accuracy game but is it or isn't it. It's a great deal if it is, not so much if it's not.

Does anyone have experience with the igaging miter gauge? I'm interested but don't see any other reviews. I wish the Bow extender wasn't so expensive. Nice job Stumpy! Now I'm looking to spend more $$$ 😂

The bow system looks great, too bad the deal is just for Americans. So much more expensive north of the border. The fence is 306 alone, but the full kit is only 270 in the states.

I'll be looking for a miter gauge soon and would love the igaging one, but alas I'm in Scotland and can't see it anywhere

Got my first pair of ISOtunes headphones with your discount years ago. Today I ordered the ISOtunes with tuner, to listen to ball games while I'm working. Old pair still holds an awesome charge. Thanks, Stump!

Out of curiosity, what happened at 7:06 to cause that large gap at the top of the board, right where the gauge pivot point is? Is that the Starett measuring device just not having a contact point there? I ask because I was looking at that gauge, but I often cut small parts, and need it to make contact all of the way up. I don't want to have it on my possible list if it doesn't make contact all of the way up. Thanks.

I'm wondering what size fence to buy for a jobsite saw? Large fence seems too long but would love to hear from those who have one.

Does the Bow Extender work on the Harvey fence? or is this just for contractor saws?

Does that digital miter gauge replace a crosscut sled?

beard looks good

I wonder if the Bow extender fence is compatible with the Jessem roller guides…

You look good in a beard. Funny though, a lot of my friends have just decided to grow beards.

Quick question: at 2:58 you SAY that you're setting the inner diameter of your hole to 4" - but the video shows that the "O" is lined up over the 4" mark, while the "I" is lined up over the 3.5" mark - ??

I use the brush for my chef knives my blades etcI own 3 of them

Does that watch get cable?

I’m sold on the ear protectors because they work when I want to ignore someone lol

I'm not a woodworker, but I want all of these tools anyways!

Hello. I have watched your channel for a long time on our TV via Roku. Today I subscribed to your channel on my computer. If you would, please give me your advice. I have an old Craftsman router table. I don't like it because it is very difficult to adjust the height of the bit. Is there a router table that makes router bit height adjustment an easy process? Thank you for any advice you may give.

Man I should have bought one of those whiteside bits when I thought $120 was a high price!

I hope those isotunes are more comfortable than the isotunes link aware, while they work ok (not bad but nothing special), they are really uncomfortable due to the hard shapes in the headband.

iGaging earns my vote. I'll probably get one to replace the built in fence on my sliding table.

I got a pretty decent sharpening guide on ali express, but I found the culprit now, it was the wheel, it had quite a lot of play, so I'm gonna replace that with an M8 thread instead and I bought some bearings that will go right onto there. I think that will solve it, not that I didn't get ok results, I mean I can push my blades through paper. But I just want to be able to get shaving sharp, just so I know I'm doing everything right, and because it's simply cool