727 Torqueflite Valve body deep cleaning. Step by step 1989 Grand Wagoneer

No video

727 Torqueflite Valve body deep cleaning. Step by step 1989 Grand Wagoneer

Рет қаралды 2,174

5 Lake's Garage

Күн бұрын

Пікірлер: 12

@memadmax69 9 ай бұрын

Great vid. Had to take over from someone elses abandoned project and this vid got me pulled thru in a couple of hours instead of a couple of days. Many thanks.

@5LakesGarage 9 ай бұрын

Great to hear. The wag is running great for the most part. I really want to get a new project this winter. Good luck and thanks for the watch. Lake

@charliericker3124 3 ай бұрын

Great job on the video! Helped a lot. Thanks

@5LakesGarage 3 ай бұрын

good to hear. We try to help where we can. Good luck on you build.

@MontsweagGarage 2 жыл бұрын

Great video. I am getting ready to tackle an A904 which has a very similar valve body. Appreciate the detail.

@5LakesGarage 2 жыл бұрын

good luck and I am glad it might help. Hope it does. We have to try to keep this history alive. :)

@eliinthewolverinestate6729 2 жыл бұрын

The 727 was easier to rebuild than ax15. Waiting on new thrust washers. 3-4 is locking transmission up. The back side of my reverse piston was broke on my 727. From me getting it stuck and rocking reverse to drive. I drove it a year no reverse.

@5LakesGarage 2 жыл бұрын

It was not that bad. Still don't like automatics. :) I can imagine that not having reverse was fun.

@codyblaylock2443 Ай бұрын

What was the trans doing ? What was your issues for having to flush out the valve body ? My 727 has no reverse and goes foward all gears and when in park it feels like your power braking it.

@5LakesGarage Ай бұрын

the first issue was that i only had reverse. I was rebuilding the 727 and since the fluid had so much crap in it. I figured it would be best to clean out the valve body. The wag runs great until i have to sit in traffic and it is hot outside. :) Good luck on yours.

@AliVapeReviews 3 ай бұрын

What product is safe to clean the whole valve body with and transmission im gonna take mine apart as its slipping and throwing a code for the valve body but I wanna try and clean the little nozzles and hopefully that fixes it without replacing it but if that doesn’t work I’ll replace it

@5LakesGarage 3 ай бұрын

I just break clean just about everything within reason. It will evaporate and does not leave a film afterwards. I usually buy it by the case. I do get the non chlorinated version. Just keep an eye on the check balls when you take it off. Good luck