Ultimate Drill Upgrade! Turn Any Drill Into a Drill Press

Рет қаралды 77,031

Күн бұрын

No Drill Press? No Problem! This Milescraft Drill Guide can take any drill and turn it into a drill press!
Videos To Watch Next
No Track Saw? No Problem! • No Track Saw? No Probl...
PLANS: www.731woodworks.com/store
Greatest Free Gift I've Ever Received: story4.us/731Woodworks
Tools in this Video:
Milescraft Portable Drill Guide (Amazon) amzn.to/47eMJKm
WEN Drill Press - amzn.to/3sImyNd
Drill Press Fence lddy.no/1iaoz
Irwin Forstner Bit Set (good budget option) - amzn.to/46gehOg
Fisch Forster Bit Set (top of the line) - amzn.to/3MOQyxz
DFM Square - amzn.to/3sCducL
Milwaukee Drill I Use - acmetools.pxf.io/m50WPD
DeWALT Drill I Use - amzn.to/47vt0G6
Rare Earth Magnets - amzn.to/49Lmvky
T-Shirt I'm Wearing - bit.ly/46peLBH
Milescraft did send me this drill guide to check out but I was not paid for this video and I'm not keeping this product. We will give it away to our Tubafour Nation members in the next quarterly drawing. Details below on the Tubafour Nation.
📲 Text DEALS to 1 (731) 207-7151 I send out regular texts to let you know about great tool deals.
Be sure to add DEALS to your text to me so you get added to the proper list. You can also click this link my.community.com/731woodworks Add the word VIDEOS to the text to be alerted when I post new content.
The full list of tools and supplies I recommend can be found on my website: www.731woodworks.com/recommen...
Other Tools/Equipment I Use and Recommend:
Ariat boots I wear (super comfortable) - ariat.dkkdet.net/9gJ5BY
Table Saw I Use - amzn.to/44XhPF5
Miter Saw I Use - amzn.to/3OqDIWi
Table Saw Blade I'm Using - shrsl.com/3xv5i
Toolbox in Background - homedepot.sjv.io/x9B2xy
Tool Organization Wall over Miter Station - amzn.to/45cQUFa
Digital KZfaq Sign - amzn.to/3GL2a2e
Work clothes I wear = TrueWerk Work Clothes - truewerk.pxf.io/GmbJjE
Camera Gear I Use - kit.co/731Woodworks/camera-ge...
Computer Equipment I Use for Editing - kit.co/731Woodworks/731-woodw...
🇺🇸 Join the Tubafour Nation on Patreon to get an exclusive Tubafour Nation sticker, access to exclusive member-only behind-the-scenes videos, member-only livestreams, discounts, and other cool member-only perks! / 731woodworks
You can also join via channel memberships to get access to the perks:
/ @731woodworks
Get $10 off any order of stickers, labels, and more using this link: www.stickermule.com/unlock?re...
Disclaimer: Please see the link for our disclaimer policy for all of our videos on the 731 Woodworks KZfaq channel www.731woodworks.com/youtubed...
Some product links are Amazon and other affiliate links, meaning if you buy something, we'll receive a small commission. As an Amazon Influencer, I earn from qualifying purchases. This helps support my channel so I can continue to make content like this.
#woodworking #wooodworkingtools #tools

Пікірлер: 180

@731Woodworks 6 ай бұрын

▼EXPAND FOR TOOL LINKS and INFO▼ Watch Next: No Track Saw? No Problem! kzfaq.info/get/bejne/f7Jjgr2dxNDUZGw.htmlsi=dShX9Fgkf76rspuu Tools In This Video: Milescraft Portable Drill Guide (Amazon) amzn.to/47eMJKm WEN Drill Press - amzn.to/3sImyNd Drill Press Fence - lddy.no/1iaoz Irwin Forstner Bit Set (good budget option) - amzn.to/46gehOg Fisch Forster Bit Set (top of the line) - amzn.to/3MOQyxz DFM Square - amzn.to/3sCducL Milwaukee Drill I Use - acmetools.pxf.io/m50WPD DeWALT Drill I Use - amzn.to/47vt0G6 Rare Earth Magnets - amzn.to/49Lmvky T-Shirt I'm Wearing - bit.ly/46peLBH 📲 Never miss another tool deal. Sign up for my Tool Deals SMS Alerts - NOTE: I text out tool deals so you don’t miss any! text DEALS to 1 (731) 207-7151 Be sure to add DEALS to your text to me so you get added to the proper list. You can also click this link my.community.com/731woodworks Important to add the word DEALS to the text! 🇺🇸 Join the Tubafour Nation on Patreon to get an exclusive Tubafour Nation sticker, access to exclusive member-only behind-the-scenes videos, member-only livestreams, discounts, and other cool member-only perks! www.patreon.com/731woodworks (If you use one of these Amazon and other affiliate links, I may receive a commission) Some other useful links: Daily Tool Deals on my website: www.731woodworks.com/tool-deals Subscribe to our email Newsletter: mailchi.mp/7e44c16eefdc/731-woodworks-email-newsletter Check out our easy-to-follow woodworking plans: www.731woodworks.com/store Outlaw's Board Butter - So Good it Should be Outlawed: www.731woodworks.com/store/boardbutter

@jhutch1265 6 ай бұрын

I bought one, used it once and returned it. Biggest cheap POS I ever bought. Genuine buyer's remorse.

@hernandezlee37 3 ай бұрын

I’m assuming you don’t like the dremel line of attachments either???

@saprious5273 6 ай бұрын

You know how I know that you are good at reviewing tools? I literally already have this but just listening to the talking points I am sitting here like "Wow, I should get one!"

@sbffsbrarbrr 6 ай бұрын

Funny.....similar to infomercials.....you never knew that you needed a chia pet 😁

@731Woodworks 6 ай бұрын

🤣

@731Woodworks 6 ай бұрын

Cha Cha Cha Chia!

@Cartierboy13 3 ай бұрын

Thank you for the review on this product

@kyleolson8977 6 ай бұрын

A drill guide can replace a drill press with a fence, but it's not always a good idea. The important rule or thumb is "use a big tool on a small workpiece, use a small tool on a big workpiece". While you can make repeated holes on a small piece using a drill guide with a jig, you're much better off going to a drill press with a fence with flip stops or other aids. The fence can also make it easier to keep the small piece in place. On the other hand, you can't bring many large pieces to the drill press, or keep them there safely, or drill a hole close enough to the center of the piece. Drill guides give you the freedom to easily drill anywhere on a large piece. The Milescraft Drill Guide is fine. There are fancier ones, but the price jumps steeply. At this is light and at the price point it's probably the best. There a similar Chinese design that sells for around the same price, but I think the 4 screw holes for a jig make the Milescraft the better design.

@yoseflugashi9820 6 ай бұрын

I have always been impressed with Milescraft. Will check this out.

@jimrosson6702 6 ай бұрын

Great video as always Matt another great item to check out and will be very helpful in the shop. Thanks for sharing

@thenext9537 6 ай бұрын

I have one. I use it for something stupid, which is an up cut router bit. I have a 1/4” shank and 1/2” routers, but sometimes I just use the drill and press to do it. I know, I know “what the heck why” is what they would say. But here we are.

@brendasmith1533 6 ай бұрын

Great for beginners! I just love your reviews. Thank you.

@jtec72 6 ай бұрын

For anyone watching in the UK (like me) Rutlands do one of these and setting up of the angle drill is way smoother than the one shown here.

@paulellis84 6 ай бұрын

Thank you for the video, Matt. I appreciate the time you take to show a product, what you like/don't like, how to use, etc

@bigdraycountry764 6 ай бұрын

Ordered. Thanks for the info on one of these. Been tryin to figure out which one to get for a while. :)

@NathanTalbertWoodworking 6 ай бұрын

Milescraft is another one of those non big name brand companies that I have grown to love. I've never had any major issues with milescraft or wen. I've had this in my cart for a while now, but still haven't picked it up. I can definitely see this being easier than adjusting my drill press sometimes to fit awkward pieces. keep up the great work with your videos.

@davidjefferds8532 4 ай бұрын

I have been on the fence about this one. But I did just order one. Matt I really do like your tool reviews.

@alvinclose8181 6 ай бұрын

Thanks, I am getting one of these right away

@FixItFrench 6 ай бұрын

The way you can angle this thing is brilliant. I need this ASAP

@timlatham7402 6 ай бұрын

I just bought one of these a couple of days ago! Love it so far!

@TadTheTinker 6 ай бұрын

Have one similar. Good in some situations.

@MattPerrin 6 ай бұрын

Perfect timing! We're about to replace our bannister and this in a jig should help with the stairs and railing

@andymccloskey8039 6 ай бұрын

ive been getting a lot of milescraft products. i really like the push blocks for my jointer and the push block that rivals the grr ripper is pretty dang good as well. the universal trim router subbase works awesome on my cordless ridgid router. the router itself has a terrible base so its nice to have handles and a biger base to keep it from wobbling.

@MrLeram12 6 ай бұрын

Thanks for your answer. Have a great Thanksgiving.

@matthewblumenthal804 6 ай бұрын

I love my drill press, but I still see this thing as a useful addition. Don't have one, but I will. Thanks for the review.

@LYTOMIZE_Woodshop 6 ай бұрын

I have one in my shop but haven't used it much since getting a drill press. You've shown me ways to use it I've never thought of before. Awesome!

@hackfabrication139 6 ай бұрын

Milescraft tools are seriously under rated. I have a couple of their router circle cutting jigs. Good stuff, decent pricing.

@millardscott5646 6 ай бұрын

Matt. Thanks. Now that I have seen it I want to buy one.

@journeytravelers5420 6 ай бұрын

Thank you so very much Matt , I needed a way to have a drill press compact and affordable , God bless everyone

@wikusvandeventer4877 6 ай бұрын

Thanks for this Matt. Pitty about the base is ok but hold one summiliar and all you said it is ok. Blessed week👊

@bobh64 6 ай бұрын

Love this simple tool been in my shops for years. Don't forget you can make jigs for the bottom for your repeated hole needs.

@brianhall9019 6 ай бұрын

Bonus tip…If it’s not mounted on a piece of wood, you can also slide the chuck into one of the holes of the rubber feet. It fits securely. 😊

@dagger6498 4 ай бұрын

I would gladly do that, but i already lost mine lmao

@johnmclain6535 6 ай бұрын

I bought this before my drill press. Does a great job and gets in places my drill press can't

@bobp3738 6 ай бұрын

This is an improvement over the old Portalign drill guide (later sold as the Craftsmen Drill guide at Sears). I still have my Portalign from the 70’s and it works quite nicely.

@Royalblue73 6 ай бұрын

I can see myself ordering one of these very soon. Thank you for the product review 👍

@731Woodworks 6 ай бұрын

No problem 👍

@kylemoon8651 6 ай бұрын

Just used one for drilling 500+ 1" holes in a few peg boards for a home gym. Worked great.

@Jmustang00 6 ай бұрын

I love this tool I use it a lot

@kimhavey7850 6 ай бұрын

This looks like a game-changer!! 🎉

@Freddie2598 6 ай бұрын

I have a Nova voyager drill press that I use a lot more than I thought I would great quality as well 🇺🇸👊🏼🔨🪚

@731Woodworks 6 ай бұрын

I'm SERIOUSLY thinking about buying the Nova to upgrade from my WEN.

@Freddie2598 6 ай бұрын

@@731Woodworks You will really wonder why you didn’t buy it long ago …🇺🇸👊🏼🔨🪚

@metronyc2855 6 ай бұрын

We considered the Milescraft and Rockler but decided on the Woodpecker Autoangle and Auto-Line Drill Guides.

@dand7451 6 ай бұрын

Love your true story brother. Amen!

@kentdavison2576 6 ай бұрын

I have been using this drill press guide for a few years. It works great for me. I mainly use it to drill for threaded inserts on table tops. It is accurate and the depth stop works great for perfect holes for threaded inserts.

@AncoraImparoPiper 6 ай бұрын

I have the same one and it's great for those small jobs that I as a DYIer have to get done. In relation to storing that tiny little chuck key, I plug it into one of the four holes in the base. These holes have rubber grommets and hold it in perfectly when not in use.

@timothyvanderschultzen9640 6 ай бұрын

Perfect Festool accessory!

@solavisa 6 ай бұрын

I want one of these! I don’t have room (or justification) for a full-on drill press but this drill guide looks like something I could really use! Thanks for the demo. Might be asking Santa….

@BruceStJohn007 6 ай бұрын

Great video Matt! This is exactly what I’ve been looking for. Thanks.

@BruceStJohn007 6 ай бұрын

Matt, I need some help. I bought this drill guide, I misunderstood thinking that it would come with a drill chuck that would insert into my drill. Obviously it doesn’t. Is there a separate chuck that I should buy to go with it? I use Bosch cordless drills and impacts and they just don’t fit into this guide. Any help would be appreciated. Thanks!!

@BruceStJohn007 6 ай бұрын

Disregard, I bought a drill from Harbor Freight that fit perfectly. Thank you though.

@CampfireWoodworksRVA 6 ай бұрын

Love this review. I recently bought a milescraft doweling jig and have been VERY happy with it. This modular press reminds me of a trim router / router table scenario. You gonna bring a table top to the router or the router to the table top?!? I have a floor standing Jet drill press. And now I’m about to have a Milescraft, too! Great review! I’ve always trusted your judgement.

@RDSWOODWORKING 6 ай бұрын

Oh I have the same drill press just the size bigger nice choice Matt

@quargr 6 ай бұрын

Hi Matt, always glad to see looking for inexpensive (as apposed to cheap) tools helping out the guys with limited funds or space or both to get the job done! Great job! At some point would like to see your perspective (kinda a shootout) between the various vendors versions of this type of tool. At this point I own the Rockler version, and even though I feel it is great for what it does to this day still wonder if I could have gotten the same basic functionality with something much cheaper. In this case I can't help wonder if by adding a base, then adding some bracing to the top of the device (think of it like an upside down U) adding stability and accuracy even to the "less expensive" devices on the cheap. At this price point you could even purchase two, one for 90 degrees, another for 45 degrees, what I suspect are the most used angles - your milage may very. Hay, maybe an extension for your new 3D printer? Anyway, even though I see this type of device being an essential part of any woodworker's toolkit (and honestly feel should be on any list of what beginning woodworkers should purchase as one of their beginning tools.) Is it as good as a drill press for pieces you can bring to the press, ah no. However, it is way better than a drill press when you can't bring the work to the press, the press in this case of course being useless. Anyway, my two cents. Thanks for the work!

@alwaysforward_WYO 6 ай бұрын

II always store my chuck key in the chuck itself, just hand tighten it and then it's right there for the next job.

@Bekim8310 6 ай бұрын

Thx Matt, I have this tool and it works great! Way cheaper than the rockler version.

@markkempton4579 6 ай бұрын

I was just looking into these because I don't have the space for a drill press but came across the Rockler which costs more than your Wen, so I gave up. I'll have to pick this up. Thank you!

@Damon_Barber 6 ай бұрын

Great video! Awesome review! This tool has made my list for future purchase! 🎉🎉🎉

@731Woodworks 6 ай бұрын

Awesome! Thank you!

@DaveEbert 6 ай бұрын

thank you so so much now i can create jobsite and second drill press for shop to avoid changing bits non-stop

@nmssis 4 ай бұрын

I have used Milescraft pocket jig and it's good quality.

@stevengeorge4393 6 ай бұрын

I bought one to drill holes into the studs to install lag bolts for a floating shelf. Needed the hole square and it did a really good job. Wish I knew about the self centering function, would have used that for the holes in the shelf as well.

@RDSWOODWORKING 6 ай бұрын

I bought that a year ago awesome product

@wesir427 6 ай бұрын

I have one of these and didn't know about all the features on it, got it for making dog holes when I eventually get around to building a workbench. You could probably improve the fence idea by putting sets of holes in the board at measured distances and then dropping something like a clevis pin through them for whatever distance you wanted at the time. Another thing that could probably be done to this is attaching some of round rare earth magnets with a screw hole in them to the feet or recessing them into the platform you made so it can easily be attached to metal surfaces, it wouldn't support the full weight of the drill but it would make it way less awkward to drill into the side of a vertical surface.

@a9ball1 6 ай бұрын

I have one and I have to admit that it is pretty high in quality. I never owned one until I got into KZfaq. Most woodworking channels were telling me to get this so I did. I've only used it once. I hated the tiny chuck key because I have arthritis in my hands and it's small. My drill has a bubble level on the end of it and I just never use it. I do have several Milescraft products and they make pretty good items. Just don't run out and buy everything that you see on KZfaq. 731 himself has even said that.

@paulmannix1760 6 ай бұрын

Fitted mine with the MDF base like yours, I left out one of the screws securing the base & drilled out the hole, that’s where I store the chuck key, supplied grommet keeps it in place. Good idea for the fence.

@travisfandrich 6 ай бұрын

I swear you have ESP! I have been in need of a drill press and don’t have the funds or the space…dude you rock!

@ericwilliams538 6 ай бұрын

This would be great for some smaller projects I have coming up!! I could just grab this, and go outside, instead of trying to carry my drill press ( because I live in an apartment building and have basically a whole woodworking shop stacked up in my apartment).... Tools like this are definitely handy for guys like me.

@joshyray91 6 ай бұрын

I think milescraft needs some more love and attention they're very reasonably priced and great bang for buck line of tools

@stevesmith7164 6 ай бұрын

Good review 👍

@731Woodworks 6 ай бұрын

Glad you liked it

@veterancustomwoodworx9858 6 ай бұрын

Ive had this for years, not bad

@RichM1967 6 ай бұрын

Even though I have a drill press I think having something like this is great for when you have an item that can't fit into the drill press such as if I'm doing a tabletop and I need to drill a hole in the table top the table tops not going to fit so this will help me drill the straight hole

@terrmaso 6 ай бұрын

I purchased a Milescraft doweling jig and was very disappointed. I used it for the project I was working on and returned it afterwards. Here is my question. How accurate are the preset angle detents? Did you happen to check or verify them? Thanks

@greghogan1288 6 ай бұрын

I have this drill guide already. I agree it is a very good product. I used it to drill holes in piece of plywood for a plinko board. It worked great and a traditional drill press would not have worked for the project.

@GasdocNZ 6 ай бұрын

I love mine. Used it to make a MFT table.

@russmartin4189 6 ай бұрын

Funny you should review this. I bought the exact same one last year. Good product. There are probably better, but it works for my purposes.

@thekensei1488 6 ай бұрын

Hey, thanks for reviewing this! I've seen it in stores, but had concerns about how stable it was. Good to know it's solid!

@ozarked2363 6 ай бұрын

I bought one. I tried it a couple of times. I make knives so I needed to be able to drill perpendicular holes in the scales for pins. It's not all that stable. It wants to wobble with the weight of the drill on it. My biggest issue with it was the difficulty in getting the drill chuck tightened to the bit. I threw it in a drawer and bought a bench top drill press for $215. Worth the money for what I do with it.

@LYTOMIZE_Woodshop 6 ай бұрын

Wow. I have one of these in my shop but haven't used it much since getting a drill press. That will change... I agree there are scenarios where it'll be useful - none of which I ever knew of until tonight. THANKS!

@731Woodworks 6 ай бұрын

Thanks for watching!

@H____enry 4 ай бұрын

I’ve found it difficult to get a true perpendicular hole with this with a Forstner bit. It helps if you take off the rubber feet and clamp it to the workpiece (but there isn’t a lot of surface to clamp to). The base is not wide enough to counter the leverage of the shaft and drill above, so it’s almost impossible to tell if you are perpendicular to the workpiece. The spring is also quite heavy, forcing you to put extra pressure on the drill and increasing the likelihood of error. I removed the spring and it helps some. Also mine seems to have a slight wobble in the shaft. I’d rate this 4/10

@wesleyaguilar5915 6 ай бұрын

I love the shirt!

@Conelpueblo 6 ай бұрын

Find a piece of relatively thick plexi to mount it on instead a piece of plywood for added convenience.

@odbo_One 6 ай бұрын

I have a drill press, but I can sure use this thing.

@miltonsimitsakos9666 6 ай бұрын

I used it this with the wood owl bit to drill 3/4” dog holes in my work bench and it worked great.

@731Woodworks 6 ай бұрын

Excellent!

@chadfallon3378 6 ай бұрын

I have this and I found it so unstable but usable. Now that I saw you attache it to a base, I am going to do that and it will instantly become more useful. I also stick the chuck key in the the rubber that comes through the hole that comes from the feet. Thanks Matt!

@tmlhkyfn 6 ай бұрын

First thing I did was attach mine to a length of 2X10 I had lying around from some project I did in the past

@vaanea290 6 ай бұрын

I've been trying to save up for a drill press for a few years now, just to many other priorities. I have that same drillmate.

@CIyphord 6 ай бұрын

Hey, this just happens to be the video I'm watching today, but I wanted to say happy Thanksgiving to you and your family. God bless 🤍

@731Woodworks 6 ай бұрын

Happy Thanksgiving

@jeremyhuggins8796 6 күн бұрын

I bought to drill a lot of holes in plywood to make a donut board. The bit wobbles and wallows out the holes. I can drill much cleaner and faster by hand. I hope I can send it back.

@thenedanocap7673 6 ай бұрын

You should review the Bora circular saw track thing. It looks nice but haven't tried it.

@731Woodworks 6 ай бұрын

Agreed. Heard good things about it!

@ewen832 6 ай бұрын

I have a Drill Press and I also believe that every work area should also have a Drillmate type tool. Think drilling into walls or workpieces on the bench or throughout your home.

@GrinderCB 6 ай бұрын

Gonna look into this. I'm in that category where budget, space and frequency of use are all issues. I'd really like a small device like this that I can get out for the occasional need.

@Madcow-454 6 ай бұрын

Looks a lot like my old craftsman I bought years ago.

@indigo_wolf3574 6 ай бұрын

I have the Rockler version with the accessory vise, which I have to believe is the US clone of the Axminster UJK version in the UK. . The vise was a freaking miracle when I had to drill lanyard holes in 80-100 small wooden spheres. . Spendy and heavier, but the chuck accepts 1/2" bits and it feels safer with larger Forstner bits.

@KZ-yy9pm 6 ай бұрын

IMO you really need to get the Rockler or the woodpeckers version. If you are only going to use it once and never again you might be happy with the poor quality and inaccuracy of the cheaper versions but they really aren't any good. The vice you purchased is the self centering one?

@indigo_wolf3574 6 ай бұрын

@@KZ-yy9pm Yes, the self-centering one that attaches to the drill guide with 4 hex screws.

@KZ-yy9pm 6 ай бұрын

@@indigo_wolf3574 ahh thanks, I knew they sold one didn’t know it’s attached to the guide. Good to know.

@andrewperry1987 6 ай бұрын

the chuck will also stick into the rubber grommets on the feet(why one side it shorter.)

@acupoflego 6 ай бұрын

I have one of these. It's biggest seller for me was it can drill deeper than 2"

@paulsim7589 2 ай бұрын

I presume you can upgrade it later with a nice keyless German chuck :)

@austinpage4347 6 ай бұрын

I was looking at buying this, but haven't really seen any reviews on it. All of a sudden this comes out. Perfect timing! Love this channel!

@731Woodworks 6 ай бұрын

Glad I could help!

@sociopathmercenary 6 ай бұрын

There are around 8000 positive reviews on Amazon.

@maximusmagni1 6 ай бұрын

Have you tried the Woodpeckers Auto Angle drill guide? I know you are a fan of their stuff.

@731Woodworks 6 ай бұрын

I haven't tried that one

@kizzjd9578 6 ай бұрын

Need this for a multi tool, like festool’s version

@scruffysanta8442 6 ай бұрын

I have this exact unit and it works well. Once my shoulder heals I will be making a base for mine.

@731Woodworks 6 ай бұрын

Praying for speedy recovery for you!

@scruffysanta8442 6 ай бұрын

Thank you!!! @@731Woodworks

@Surmoka 6 ай бұрын

I bought this and it was inaccurate. It had a strong wobble as the pin on top was slightly bent. I measured with a caliper and carefully sanded off 0.1 millimeter from 2 of the 6 sides of the pinion. Now it's centered and stable. But it was a hard ride.

@sdoitla1431 6 ай бұрын

This thing and an appropriate forstner bit can make a better pocket hole.

@NismoPhx 6 ай бұрын

Would love to see this one compared with the Rockler version.

@wyattsutphin 6 ай бұрын

Ive had one of these for a couple years now. The shaft of the chuck key fits into the rubber feet for storage.

@bigredracingdog466 6 ай бұрын

I have one. It works best if you make a bigger base for it and clamp it down.

@Master_Smurf 6 ай бұрын

thnx for the review i just purchased this from a different manufacturer, its handy on field. i also purchased a drill press and was wondering what RPM range did you set yours for woodworking (as there is a wide range to set) ?

@ellisreeves 6 ай бұрын

The speed of the drill press is determined by the diameter of the bit, type of bit (twist, spade, etc.), also type of wood (hard or soft) can come into play. There should be a chart with the drill press. If not let me know and I see if I can get something up for you.

@MrTuggins 6 ай бұрын

MillsCraft or Rockler drill guide? Both similar with a few differences. What do you think about the Rockler guide?

@RealityCheckUS 6 ай бұрын

I have one also. No matter what I do, even after Milescraft sent me a new one, it wobbles. It kinda works, but not even close to my cheap Harbor Freight drill press.

@arick_mnc 6 ай бұрын

exactly! to much play in chuck!

@FixItFrench 6 ай бұрын

If you have a right angle drill, do you know if that would be compatible as well?