99% of Beginners Don't Know These Miter Saw Mistakes to Avoid!
Рет қаралды 281,562
Күн бұрынPrevent injuries on the miter saw. I'll share with you the woodworking tips and tricks that I have learned over the years. I'll also share some tools that will help make your miter saw safer to use.
Video To Watch Next
99% of Beginner's Don't Know These Table Saw Mistakes to Avoid - • 99% of Beginner's Don'...
Free Masterclass on how I started and grew my woodworking business from scratch - site.731woodworks.com/masterc...
My Tool Company - faithvalleytools.com
PLANS: www.731woodworks.com/store
Greatest Free Gift I've Ever Received: story4.us/731Woodworks
Tools in this Video:
DeWALT DWS779 Miter Saw - amzn.to/3ypq7KQ
Festool Kapex Miter Saw - amzn.to/3V2Tomf
Makita Miter Saw - amzn.to/3UFRbgd
Bosch Miter Saw - amzn.to/3wMfilj
Delta Cruiser - go.magik.ly/ml/22fe3/
WEN Miter Saw - amzn.to/3KnC7PL
CMT Chrome 80 Tooth Blade - amzn.to/3UItu6T
Diablo 80 Tooth Blade - amzn.to/3UCDr5Q
Woodworking Square - lddy.no/1js9c
Double Stick Tape - amzn.to/3yhPz4J
Zero Clearance Tape - amzn.to/4aoTLNx
10 Million Dollar Stick - amzn.to/4ahwuwZ
Dust Mask - RZ Mask - amzn.to/4blbzKy
DeWALT Dust Extractor - amzn.to/3UXiEv7
Festool Dust Extractor - amzn.to/3UZyLbD
RIDGID 6HP Shop Vac - homedepot.sjv.io/DKvyry
Stealth Stop Stop Blocks - amzn.to/4bDNkqH
Portable Miter Station - amzn.to/3WM1aTN
Worx Portable Workbench - amzn.to/3V04GbP
Rolling Stands - amzn.to/4bHdQjd
Miter Station Build Plans - www.731woodworks.com/store/mi...
Shop Project Plan Bundle (includes miter station and more) - www.731woodworks.com/store/sh...
📲 Text DEALS to 1 (731) 207-7151 I send out regular texts to let you know about great tool deals.
Be sure to add DEALS to your text to me so you get added to the proper list. You can also click this link my.community.com/731woodworks Add the word VIDEOS to the text to be alerted when I post new content.
The full list of tools and supplies I recommend can be found on my website: www.731woodworks.com/recommen...
Other Tools/Equipment I Use and Recommend:
Where I Get My T-Shirts (most of them) - bit.ly/40oBlJt
Ariat boots I wear (super comfortable) - ariat.dkkdet.net/9gJ5BY
Table Saw I Use - amzn.to/44XhPF5
Table Saw Blade I'm Using - shrsl.com/3xv5i
Toolbox in Background - homedepot.sjv.io/x9B2xy
Tool Organization Wall over Miter Station - amzn.to/45cQUFa
Digital KZfaq Sign - amzn.to/3GL2a2e
Work clothes I wear = TrueWerk Work Clothes - truewerk.pxf.io/GmbJjE
Camera Gear I Use - kit.co/731Woodworks/camera-ge...
Computer Equipment I Use for Editing - kit.co/731Woodworks/731-woodw...
🇺🇸 Join the Tubafour Nation on Patreon to get an exclusive Tubafour Nation sticker, access to exclusive member-only behind-the-scenes videos, member-only livestreams, discounts, and other cool member-only perks! / 731woodworks
You can also join via channel memberships to get access to the perks:
/ @731woodworks
Get $10 off any order of stickers, labels, and more using this link: www.stickermule.com/unlock?re...
Disclaimer: Please see the link for our disclaimer policy for all of our videos on the 731 Woodworks KZfaq channel www.731woodworks.com/youtubed...
Some product links are Amazon and other affiliate links, meaning if you buy something, we'll receive a small commission. As an Amazon Influencer, I earn from qualifying purchases. This helps support my channel so I can continue to make content like this.
#woodworkingtips #woodworking #woodworkingtools
@731Woodworks Ай бұрын
Click "Read more" to see all of the tool links. Watch 99% of Beginners Don't Know These Table Saw Mistakes - kzfaq.info/get/bejne/grKmi9WesbLae6c.htmlsi=ZfNKRgOobApoWYk- Tools in this Video: DeWALT DWS779 Miter Saw - amzn.to/3ypq7KQ Festool Kapex Miter Saw - amzn.to/3V2Tomf Makita Miter Saw - amzn.to/3UFRbgd Bosch Miter Saw - amzn.to/3wMfilj Delta Cruiser - go.magik.ly/ml/22fe3/ WEN Miter Saw - amzn.to/3KnC7PL CMT Chrome 80 Tooth Blade - amzn.to/3UItu6T Diablo 80 Tooth Blade - amzn.to/3UCDr5Q Woodworking Square - lddy.no/1js9c Double Stick Tape - amzn.to/3yhPz4J Zero Clearance Tape - amzn.to/4aoTLNx 10 Million Dollar Stick - amzn.to/4ahwuwZ Dust Mask - RZ Mask - amzn.to/4blbzKy DeWALT Dust Extractor - amzn.to/3UXiEv7 Festool Dust Extractor - amzn.to/3UZyLbD RIDGID 6HP Shop Vac - homedepot.sjv.io/DKvyry Stealth Stop Stop Blocks - amzn.to/4bDNkqH Portable Miter Station - amzn.to/3WM1aTN Worx Portable Workbench - amzn.to/3V04GbP Rolling Stands - amzn.to/4bHdQjd Miter Station Build Plans - www.731woodworks.com/store/miter-station-build-plans Shop Project Plan Bundle (includes miter station and more) - www.731woodworks.com/store/shopplanbundle How to Apply a Tourniquet - kzfaq.info/get/bejne/rb2GochoyLvWnWw.html Stop the Bleed FREE Online Course - www.stopthebleed.org/training/online-course/ Free Masterclass on how I started and grew my woodworking business from scratch - site.731woodworks.com/masterclass The full list of tools and supplies I recommend can be found on my website: www.731woodworks.com/recommended-tools Greatest Free Gift I've Ever Received: story4.us/731Woodworks Join the TUBAFOUR NATION through Patreon to get access to exclusive member only behind the scenes videos, member only livestreams, exclusive discounts, and other cool member only perks! www.patreon.com/731woodworks If you use one of these Amazon and other affiliate links, I will receive a commission on qualifying purchases. Greatest Free Gift I've Ever Received: story4.us/731Woodworks Some other useful links: Daily Tool Deals on my website: www.731woodworks.com/tool-deals Subscribe to our email Newsletter to get new content alerts, sales, and more! mailchi.mp/7e44c16eefdc/731-woodworks-email-newsletter Easy to Follow Build Plans - www.731woodworks.com/store Outlaw's Board Butter - So Good it Should be Outlawed: www.731woodworks.com/store/boardbutter
@a9ball1 Ай бұрын
I've been woodworking for almost 50 years and this was a great selection of tips. Watch it, listen to him and do what he does or doesn't. Slow down, take your time and after 50 years you will still be able to count to 10 on your fingers. Thanks Matt!
@musonius.x Ай бұрын
using hands only)))
@bentot45 9 күн бұрын
😸👍
@gregmize01 Ай бұрын
Love the 45° fence hack!
@seankrake4776 Ай бұрын
I recommend making it able to attach to the fence. This way you can screw it in place whenever you need it rather than wasting a 2x6 every time you need to do it.
@fallenseraph5V 26 күн бұрын
@@seankrake4776or having to remove the double-stick tape when finished.👍
@paulmannix1760 Ай бұрын
I always watch this type of video to reinforce the things I think I know.
@Citadel1974 Ай бұрын
3:09 One thing I found out the hard way - not only does your fence need to be square to the blade but each side needs to be lined up with the other. Both sides of my fence were square to the blade but one side was slightly forward and as result....bad cuts 😕 Just put a straight edge to your fence to make sure.
@wikusvandeventer4877 Ай бұрын
Matt. This is exactly what I was waiting for. Show more of these. Does and don't. Safety is the key in woodworking. Simple mistakes and safety on all the machines. Thank you so much for these videos to teach and learn us❤
@RJSDZNS Ай бұрын
I made the miter station from your plans and added a hood to mine with a dust collector 3 inch port . Takes care of most of my dust then I vacuum out what doesn't get thrown into the collection hole. Great video as always Matt.
@56PapaBear56 Ай бұрын
Thanks for all the good tips
@garymiller5937 Ай бұрын
A spectacular collection of tips, Matt. Some are common sense, while others I've never thought of. A thousand thank you's for this video, Matt!!!!! 😊😊😊😊😊❤❤❤❤❤
@Damon_Barber Ай бұрын
Great tips/ reminders!! ❤🎉
@Mandurath Ай бұрын
Thanks for the tips.
@paulreschke4171 Ай бұрын
Excellent info Thanks !
@randytellez2451 26 күн бұрын
Good stuff to keep in mind. Thank you.
@tonygilbert2373 Ай бұрын
Thanks for the great advice!
@jimrosson6702 Ай бұрын
Great tips Matt thanks for sharing
@keithosterkamp6207 24 күн бұрын
Thanks for the big angle refresher. I was just contemplating a project with such a cut and was trying to remember where I’d seen that tip before.
@garymiller5937 Ай бұрын
I just love that large angle tip, Matt! 😊😊😊❤❤❤
@sisepuede5612 Ай бұрын
For #4, I would also add ensuring that the fences on either side of the blade are actually in line with eachother also
@imsowright90 Ай бұрын
Good info.
@swcheshier61 Ай бұрын
Love your videos, brother! Thank you and keep up the good work. God bless
@AFutureOf 29 күн бұрын
Great tips
@MetalNick 12 күн бұрын
Good tips. Love that sharp angle jig.
@FixItFrench Ай бұрын
Great video! I actually really like these type of videos where you show what not to do, and then you show the correct way of doing it
@731Woodworks Ай бұрын
Thank you!
@jefffree6990 Ай бұрын
some great tips here ( who hasn't been tempted to to do something that didn't feel right? ) Love The first one about the jig for large angles. 6:40 the zero clearance jig to cut small pieces - I had one shatter and turn into projectiles)
@rohlfing63 27 күн бұрын
Great tips. A DeWalt miter saw (not a slider) is one of the most used tools in our shop where I'm teaching inner city kids about carpentry and woodworking. Besides the warning about baggy sleeves, I'm constantly reminding the students to tuck in their hoodie strings, or take them off. Some of the students are wearing hoodies 12 months out of the year, the risk is significant.
@v3c7r0n Ай бұрын
Great video Matt! I do feel somewhat personally attacked by #3 because I do it constantly, but you are 100% right. Also Shop Nation makes a bunch of dust collection upgrade brackets for most of the saws you've mentioned, including the older DeWalt saws. I haven't put it on my DW716 yet but I will be doing that soon.
@g.efaber482 Ай бұрын
Another great informative video. Thanks, Matt.
@731Woodworks Ай бұрын
Glad you enjoyed it!
@qapla Ай бұрын
Great video, Matt. Safety should never be taken for granted since most of the time you only get one chance to be safe! It too late for the coulda', woulda', shoulda' after you cut something precious off - be that some of the wood or a body part. I bought the 12" non-sliding DeWalt Miter saw and added the shadow line. I already have one of those controversial radial arm saws so don't need the added cutting capacity the slide offers. More of these Do's & Don'ts videos would be nice, especially if you make sure to explain the why's behind the no-no's.
@warrensmith2902 Ай бұрын
After 10 years without a miter saw, I purchase the Ridgid 10" Cruiser and put a Frued Ultra Finish blade on it. . Added a back zero clearance fence, and Fast Cap's zero cleanse tap . A little black hobby foam to enlarge the dust collection scoop, and a dedicated Small shop vac with an auto start switch and a cardboard box helps contain most of the dust. Even bought the DeWalt Crown stops so I can do crown molding Cruiser as the same 8mm hole on the side. It sits at the end of my M1000 extension to my MFT/3 table. Give me 12' to the left in my shop. I made custom temporary supports for supporting material on both side when needed. BTW, you can easily make one of those million dollar hold downs with some scraps and rubber door bumpers.
@elsaint7657 6 күн бұрын
awesome ❤
@peterwachter7753 14 күн бұрын
Thanks!
@NathanTalbertWoodworking Ай бұрын
I finally upgraded my crappy hetabo miter saw to the 780 last fall. It doesn't seem like much but that shadow line is such a time saver. lining up cuts is super easy and accurate without even having to put any thought into it.
@davebender8901 Ай бұрын
Loved the idea of the "angle board!" The website is great! Sorry it was raining the day you made video... My day today, was going to Minneapolis, and watching the Yankees win!
@davidhole8175 Ай бұрын
This is a great video. I'm a guitar builder and a new Miter saw owner (Dewalt). I was wondering how to safely cut a 15 degree scarf cut on guitar necks (20mm thick long boards). The only way I can think is to set the angle and clamp the material to a block, which is in turn clamped to the fence. This basically leaves the neck material sticking out towards me as the cut is made (I would stand to the side).
@nattyp7801 Күн бұрын
Totally agree using your PPE…..
@garyharris8479 Ай бұрын
I just ordered the Wen 10" sliding dual bevel, hope it arrives soon to replace my space hog of a 12" Kobalt so I can build my miter station.
@higgiepop158 Ай бұрын
Thank you
@731Woodworks Ай бұрын
You're welcome
@captaingavtron Ай бұрын
I have made many dangerous cuts with my table saw. That 45 degree trick will come in "handy". Get it lol, I won't lose my hand 😂
@ypaulbrown 27 күн бұрын
Nice Tudor Watch.......
@jrmontarbo6555 Ай бұрын
Love your videos and had to comment about the Sandlot reference 😂😂😂 "we've been going about this all wrong.....I blame myself" 😂😂😂 God bless, have a great day! 🙏
@LYTOMIZE_Woodshop Ай бұрын
I absolutely LOVE the tip for the big angles - THANK YOU!
@731Woodworks Ай бұрын
Glad it was helpful!
@patrickbrown551 3 күн бұрын
Great safety tips safety glasses would be a great addition
@billyblackie9417 10 күн бұрын
G double sided tape is a great tip Now I have to go and try that out tomorrow as it is a great tip and a safe tip
@joec78257 Ай бұрын
Nice Tudor GMT! Very cool watch
@731Woodworks Ай бұрын
Thank you. My wife surprised me with it for my birthday. Was an amazing surprise for sure!
@BMWE90HQ 27 күн бұрын
I have a metabo hpt 12 inch with zero rear clearance. It has the sliders like your festool. I just got it but so far it’s great.
@wallydavis8307 27 күн бұрын
I wish I would’ve seen this video earlier recently. I tried to cut a 45° angle on a very short piece of 2 x 4 end and it grabbed it kicked back, throwing my hand into the frame of the miter, saw cutting and pinning my finger there even with gloves on. I was in a remote part of Wisconsin just wanted to get to urgent care to have them look at it, but they wanted to send out paramedics and when they looked at my finger thought that I might lose it and called for a helicopter to meet us at the nearest airport. By the time we got to the airport, the blood flow had improved and decided to have my wife drive the two hours to a trauma one hospital instead of the $40,000 helicopter ride. turns out the tendons and blood flow is good now, but I damaged my nerve and the surgeon said I should regain feeling within the next eight weeks. I really appreciate you doing this video
@bsoneill3 22 күн бұрын
Wow. I hope your hand recovers. In case anyone is reading your comment and sees the use of gloves. Never use gloves with anything spinning. Never. If the glove catches, it will pull and wrap and you're in deep trouble very quickly.
@jerryhubbard4461 3 сағат бұрын
I have the same saw you have here. I made my dedicated table to the saw. It is 12 feet to the left and 6 feet to the right. I have an adjustable stop block on either side but the fence I made 1/8 inch back of the saw fence. Wood does expand and contract and that will cause you to get out of square to the blade. When I make any cross cut with the saw, I will put my lumber against the saw fence and not the table fence guaranteeing me a square cut every time.
@fj7509 Ай бұрын
I love your Tudor GMT by the way!
@731Woodworks Ай бұрын
Thanks!
@sunriseshell Ай бұрын
I got a Kobalt one on sale a few years back. It seems as good as the more popular brands.
@scottbyrd2157 Ай бұрын
Matt, Awesome video! Great safety tips!! BTW I just got the Metabo HPT 12” sliding miter saw. It’s a newer model. I could not find any reviews on this saw. I did a lot of research and this saw is very comparable to dewalts. Handle is like your Festtool. If you think you could do a review on this saw it would add to the competition. Straight out the box was true to blade and fence. I highly recommend this review as there are older reviews but the saw is newer model now.
@michaeloleary4017 Ай бұрын
Great video! Two questions … 1) where can I get the aftermarket dust deflector you point to in the video and 2) are plans for the zero clearance jig?
@GrinderCB Ай бұрын
Looking at #1, cutting unsafe angles. And lots of people questioned back in high school why they had to know geometry because they would never need it...
@rshawiii Ай бұрын
I bought the 780 a couple of months back, It came with a 60T fine finish blade, not a 32 Tooth as you claim. I find it so far to be pretty good. I did pick up a 100 tooth Diablo that will go on when I'm finding the 60T is not "Cutting It" Lol.
@stedvet Ай бұрын
The Makita you showed comes with a 60 tooth Makita blade now. It cuts beautifully smooth 😊
@mikem1436 Ай бұрын
Common sense would be that a miter saw is going to be used for cross cuts. Why would a manufacture ship a 40 tooth? Old 12" Ridgid came with a 80 tooth. New 12" came with a 60 tooth.
@vikingnorm6935 13 күн бұрын
I bought a kit I believe it was off a parts sight, it was possibly EBay, but I think it was some parts site I found on a YT video, but dirt cheap I ordered a shadow line kit for my 79, it’s basically the same as the 80 now, they give you the wire & switch kit & handle parts & light & it takes like 10 minutes to install, works great, been like 4-5 years now, I think I only paid $30 ish
@davidewing1779 Ай бұрын
Great vid! For a great saw that has the rails forward so you can put it against the wall, everyone should take a look at the Hitachi. I bought mine on sale for like less than 300 and it is fantastic!
@731Woodworks Ай бұрын
Thanks for the tip!
@1steelcobra Ай бұрын
My dad did that "forget to adjust the fence" whoopsie on his DW. Turned into a great excuse to finally replace the blade in it, at least. I'll note that the shadowline for the cut is the best way I've seen for easy reference, since it perfectly shows the kerf thickness, even out in the sun.
@ypaulbrown 27 күн бұрын
I use my DeWalt like your saw, I think, to cut aluminum......100% of the time..... it is a fantastic tool for that, the only thing I do is use a cutting wax by Tapmatic, Edgelube, and a TCP profile 80 tooth blade......the surface I get will blow you away how smooth.... and yes, it is important to wait for the blade to stop before racing the saw....the dust is no issue, but the chips coming off can be hot, so ear and eye protection is important.... wearing a ball cap with the brim in the proper direction is also very helpful..... all your tips in this video are spot on.....thank you so much....Paul
@ypaulbrown 27 күн бұрын
fantastic information 731
@e.t.preppin7084 28 күн бұрын
I’ve got a good tip to add for newbie’s. Don’t cut a bowed board with the hump up leaving a gap between the board and saw base. When the cut nears the bottom the board pinches the blade and can want to pull the board towards you and up to the saw. Especially when cutting hard woods. Some great tips in this video. I’ve tried to never become over confident when using all power tools. I love that T shirt, it’s so true. Always listen to your gut it’s truly one of your best safety features. One last tip if something goes wrong release the trigger.
@daifeichu Ай бұрын
I'm glad you mentioned the crossing your arms thing. I tend to see this more with right handed people. Us left handers have learned to roll with the punches since it's mostly a right handed world so we can operate the saw with both hands.
@JeffreyFeyh-rb4xk 20 күн бұрын
This is a funny concept to me because as a a Right handed person. I've been into woodworking as a hobby since I was 5. I probably bought my first miter saw in my early 20s. I am now 38. Perhaps I never learned the bad habit because. I learned from a handful of trades people, including my uncles. And an assortment of HGTV personalities back in the early 90 when I was in middle school and highschool. Im not saying I never make mistakes because I have. But to cross my arms to operate a miter saw never crossed my mind. I think that's a commen since thing. And has nothing to do with being right handed or left handed. But Right minded in the task at hand.
@daifeichu 20 күн бұрын
@@JeffreyFeyh-rb4xk I didn't start out as early as you, I was 10, but now I'm 56 and in all that time I've never seen a left handed person cross their arms using a miter saw, only right handed. I believe the reason is, a lot of things in the world are built for righties so left handed people just shrug their shoulders and adapt to the situation. As a right hand person you wouldn't understand.
@billyblackie9417 10 күн бұрын
Good tip to let the saw blade get to full speed and let the blade cut it way through the wood while you gradually guide the saw into the cut and always let the blade come to a complete stop before raising the blade out of the cut. I learned those tips from you thanks
@Munkendrunky Ай бұрын
Matt! Thanks for all the great content over the years! I wish you had one nearby so you could make a hater's guide to Menards!
@731Woodworks Ай бұрын
I would love to have one of those stores close!
@balancepoint226 Ай бұрын
@731Woodworks A Company called CFS or Custom Fabricating Solutions actually makes Zero Clearance Plates for Dewalt Miter Saws, even Sliding models. For the longest time no one was making the Plates for the DW717 10" Slider model, but they do. Quick Shipping also. No issues with any level issues as it sits flush or about a 32nd under the miter plate. No issues cutting the line either as it does come blank to perfectly match your blade. Thin Kerfs as well. I would advise using a higher teeth blade that matches the blade you want to use first so that the initial cut goes smoothly. Just take your time.
@RyanMoto79 Ай бұрын
I never thought about using it like that with a stop block I built your miter saw station and never had a stop block before. But even with a stop block I still clamp the piece down by the blade that’s the only reason I haven’t had kick back . Thank you for this . Could have saved anything bad from happening to me .
@johnhaller5851 Ай бұрын
At least on the DeWalt, the instructions say to let the blade stop before lifting it after a cut. I thought it was because the blade guard might not retract fast enough, but kickback makes more sense. It doesn't hurt to reread instructions every year or two, after using the saw for a while, the reasons start to make more sense, but we can also get a sense of security with a dangerous, but useful tool.
@Gary-ce2hk 14 күн бұрын
How do you fix vertical misalinement
@Jovis366 8 күн бұрын
Hey Matt, do you have a source for dust collection adapters? I have a variety of tools and the are ll different size hose connections.
@thenmathhappens2829 16 күн бұрын
One more tip for some saws with larger blades and electric brakes. When you release the trigger, the saw can lurch downward slightly (conservation of angular momentum). My 14" milwaukee SCMS will lunge about 2" if you're not expecting it. It's not an issue for normal cuts where you let the blade stop in the fully down and forward position, but if you spin it up and then realize you need to make an adjustment, raise the blade fully and let it stop before doing anything else.
@CharlesGallo Ай бұрын
I’m looking at a “low speed” saw, one similar to the DW872 blade speed wise, but also for wood (ad would prefer 10”. Any ideas?
@johnbailey2024 23 күн бұрын
Im so glad you mentioned the not crossing your arms thing, ive been utilizing this method for years, and again do you leave the saw plugged in when leveling the blade or not? And when i change my blades, i put a wrench on the nut and turn on the saw, that blade comes flying off, just make sure you stand off to the side, cause that blade will mutilate whatever it hits, and always take the saw guard off too,
@LuisRamos-rv9fq Ай бұрын
Can you review the Wen miter saw model MM1215 to see if its a good miter saw?
@Meanfigurines 2 күн бұрын
Hi, what aftermarket adapter do you use on your DeWalt miter for catching the dust?
@pascaljutras178 15 күн бұрын
When I was beginner I did mistake of loose sleeves combined with arms crossing, it was a very close call, that was very stupid, my sleeve was at about 1 inch to be grabbed by the blade. From there my first rule was to learn about all rules to get safe and also keeping a minimal fear of that tool or any other tools.
@robj8281 27 күн бұрын
The two-prong hold-down tool at 1:45 - is this shop-made or purchased? That looks like great geometry. If purchased can you provide a link? Thanks.
@ypaulbrown 27 күн бұрын
great stuff.....and don't cross your arms....Paul
@jackturner214 29 күн бұрын
For #1, I highly recommend this versus just holding a board up on the saw. One thing I will suggest is that rather than double stick tape, you use the clamp that comes with every miter saw that is totally worthless for any other application; now, not only are you using a piece most people just consider at throw away, you can make one jig and use it over and over. Or, just buy the Rigid R4222, which cuts angles up to 70 degrees; that's what I did and I've been happy with it so far.
@DarksouIjah Ай бұрын
Love these videos. QQ, any tips when you only have the miter saw and you are cutting longer pieces of wood like fence pickets? So basically, a lot of the picket is just floating off any surface. I hope this makes sense.
@731Woodworks Ай бұрын
I would get a rolling stand or some type of support to keep it from falling.
@DarksouIjah Ай бұрын
@@731Woodworks Thanks for your response. I think I’ll give your miter station build a try once I reorganize my garage. Wish me luck bc I’m a rookie to wood working.(I will be buying your 6 plan bundle)
@peterbergeris6510 28 күн бұрын
Do you have any plans or directions on how to make a barn door?
@BGibb89 Ай бұрын
Where did you get the dust shroud for the DeWalt miter saw? I have a comparable Milwaukee saw and I want to improve the dust collection.
@kurtwm2010 2 сағат бұрын
14:17 20% off because because it is raining where you are. I'm in Maryland, it's June and we are having 93 degrees and a snow storm is rolling in. Will the discount double?
@BeyondDreamTime Ай бұрын
0:14 - JFC, degrees =/= inches, Jim-Bob...
@patrickbink4617 27 күн бұрын
I chuckled at that, too, when I heard Matt say that 😀
@BeyondDreamTime 27 күн бұрын
@@patrickbink4617 Not a bad idea to have a laugh whenever you have a chance, maybe especially these days. :)
@PaganWizard Ай бұрын
Just a quick FYI, you mentioned the Delta Cruzer miter saw, that saw is no longer being manufactured. This is not because any design flaws or mechanical issues, it's because their parent company decided to rebrand it under the RIDGID (Home Depot) name, my guess is that they wanted to take the saw out of their competitor's stores (Lowe's) . The Delta Cruzer can still be bought on Amazon, and other sites as well, and I believe (please correct me if I'm wrong) the warranty for the Delta saw is being honored by Ridgid, and/or the store or website you bought your saw from. I bought mine on Amazon, along with an extended warranty, and Amazon will cover any issues via that warranty.
@chbu8346 Ай бұрын
I got one a few years back. First project got a small piece that kickback and hit the garage door. I bought a canvas apron after that.
@lebowski1973 Ай бұрын
I’ll bet that apron does a great job at protecting you from kickback
@DTSVK Ай бұрын
Tip #7: Loose Clothing. I would add: "also do not use gloves". Thanks for good tips and free safety course which was not boring. Even seasoned woodworkers should time to time watch videos like this one. My neighbour spent whole life in wood shop. After retirement he voluntarily went to work on saturday to met his old mates. He lost three fingers.
@thehickorylanewoodshed2378 28 күн бұрын
Yes I’ve already read my manual. 😁😏
@tyronepelfrey8192 Ай бұрын
Bosch miter saw is great
@manybikesrbest Ай бұрын
Using the sliding feature and a good--say 80t--blade, the bottom of your cut will always be cleaner--zero-tolerance tape, or no. Not much, mind you; the top will still be plenty clean, but for extra splinter-y wood, it comes in handy to know.
@great7ven 22 күн бұрын
What about the metabo 12 inch miter saw? That is not breaking the bank and has a forward slide. I'm very happy with that one and seems to be very accurate.
@ST-0311 Ай бұрын
The Metabo HPT C12RSH2 is a beast of a zero rear clearance miter saw. Currently $299 on Amazon and Menards.
@CrossCut_Custom_Builds Ай бұрын
I have one and hate it.
@coolgamer4607 Ай бұрын
Those darn two ba six boards are so useful
@ourtube4266 Ай бұрын
I’m a harbor freight fanboy and would recommend the Hercules version 99% of the time. HOWEVER, menards has the Metabo sliding miter saw at $299 with a 11% rebate right now. Go get that thing if you have a Menards close by.
@ollie644 Ай бұрын
I got a small piece stuck between a stop block and the blade while cutting glue blocks a few days ago and it got flung across the room smashing itself into bits against the wall. Almost hit me as well I ended up doing them a different way afterwards
@joemcdonald8516 Ай бұрын
Thanks for the useful tips, Matt. However, I noticed you only wore the dust mask when you were doing the segment about dust 😵💫 🤷🏻♂
@731Woodworks Ай бұрын
🤣 good catch
@joemcdonald8516 Ай бұрын
@@731Woodworks 😁 I guess that's just the retired wood shop teacher in me...
@mhills51 Ай бұрын
I like the strange angle. I ran into this and like your shirt says don't do it. I got that zero tape some time ago from your videos. Now a few things, when talking about what saw to get you never brought up the 12 WEN. You showed a pic and that was it. Next I have a question about using a sliding saw. Some on youtube will take small layers at a time? It seems you would get more tear out than a single cut. what do you think?
@davidhamann1300 23 күн бұрын
great video! but, you forgot a big mistake. board size is bigger than your saws capacity, and to cut that last ½" you raise the board up.
@bachavelli Ай бұрын
What kind of clamp is that which you're using to hold down the 2x4 at 42 seconds into the video? I could use something like that!
@DR-zi3wz 27 күн бұрын
I don’t know about the DWS-779, but on my DWS-780, the DW-7084 crown stops can’t mounted. The tabs under the table are not cast in and the threaded clips cannot be mounted. Dewalt basically said “Oops” and that was all they offered. I used JB Weld to mount the clips. Otherwise, it’s a great saw.
@bradb8292 Ай бұрын
Did you swap out the blade that came with your Kapex? I've found that Festool is probably the exception to that rule, since the blades they include with their tools are decent.
@731Woodworks Ай бұрын
You're right. They include very good blades. But I did buy a higher tooth count blade for it that I am using on it.
@fatabeestje Ай бұрын
Oh my goodness, (* don't believe in God *). Yesterday I used my new mitresaw. The Bosch Professional GCM 18v-305 GDC with the GTA3800 an made (* a little bit by purpose *) a few dangerous cuts. But an hour later this video came out an now I see how you can safe make small cuts. So I think I'm going to make a jig to put on the mitresaw for small cuts. Thank you.. also for still having all of my fingers 😂. Greetings from the Netherlands
@UserJBweld Ай бұрын
I always have trouble getting my saw square because it's bad saw in general and the square touches the teeth in front and back. Besides buying a better saw do you have any suggestions?
MOONCAKE FACTORY
Рет қаралды 111 МЛН
James Gatlin
Рет қаралды 1,5 МЛН
The Honest Carpenter
Рет қаралды 938 М.
Arini Afriani
Рет қаралды 112 МЛН