7mm PRC Reloading: What You'll Need
Рет қаралды 62,858
Жыл бұрынFull Story: bit.ly/3DnwwFb
UR on RUMBLE: rumble.com/ultimatereloader
UR T-Shirts: bit.ly/2UEAkgW
UR on Patreon: / ultimatereloader
Want to know what it takes to load 7mm PRC? I'll walk through that in this story!
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Disclaimer:
You alone are responsible for the safety of yourself and your property.
Check local and state laws before undertaking any activity involving possessing, transporting, and shooting firearms. Check local and state laws before attempting to load ammunition or perform any modifications to a firearm. Always abide by the law. Always practice gun safety.
The content on this channel (including videos, ammunition reloading data, technical data, comments, and any other information contained within) is for demonstration purposes only.
Do not attempt any of the processes or procedures shown or described in this video or on this KZfaq channel (gavintoobe).
Any reloading data supplied on this KZfaq channel (gavintoobe) or in this video, including any comments from viewers and readers must be assumed to be in error.
Always consult at least three sources of manufacturer's ammunition reloading data before reloading your own ammunition.
Do not attempt to repair or modify any firearms based on information found on this KZfaq channel or in this video.
Gunsmithing procedures should only be performed only by a licensed gunsmith.
Ultimate Reloader, LLC can not be held liable for any harm caused to any individual or any personal property related to activities, procedures, techniques, or practices described in whole or part on this KZfaq channel (gavintoobe) or in this video.
By watching this video in whole or in part, you agree that you alone are solely responsible for your own safety and property as it pertains to activities, procedures, techniques, or practices described in whole or part on this KZfaq channel (gavintoobe) or in this video.
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Material Connection Notice:
The following Ultimate Reloader partners are featured in this video:
- Hornady
Ultimate Reloader partnerships involve one or more of the following:
Product supplied for evaluation + testing + features in videos/articles, paid advertising and promotions, engineering and product development services, scientific testing and evaluation, external media production and related marketing services.
Ultimate Reloader LLC is committed to publishing subjective and data-driven information+insights related to products whether it be favorable or unfavorable or both.
For more information about Ultimate Reloader partnerships, please visit: ultimatereloader.com/about
@hmoobshow2482 Жыл бұрын
Flexing with that 8 lb Retumbo that’s wort more than gold! 😂
@n8o8n Жыл бұрын
Haha.
@deaniverson4671 Жыл бұрын
Lol that’s exactly what my wife said!
@kyleaubu Жыл бұрын
I'm so ridiculously excited about this cartridge. I'm barrel shopping right now.
@larryweldon9270 2 ай бұрын
June 2023 found out about this cartridge - Mossberg Patriot was reviewed well so I bought that and a Burris Veracity PH. The rifle couldn't group well so in February I sent it to Mossberg. New barrel (no charge) - now I get .6" groups and ring the 8" gong at 500 yards every time. Couldn't be happier!
@kerryfalls3292 Ай бұрын
I also bought a Mossberg just to find out if the 7mm prc was as good as it sounded, and it is! Put a radial muzzle brake on it and it shoots really light, loud but I take my hearing protection with me anyway.
@sveinsoermo9883 Жыл бұрын
Thx for GREAT videos in general!!!
@bobmcmillen4502 Жыл бұрын
I know this is old but I thought I’d throw this out. I bought the least expensive 7 PRC I could find. A Mosberg Patriot. It shot so well I went and bought a second one for my son. 65 grain H4831SC. Tuned that load to .25 w 175 Berger. 2nd Rifle like RL 22 64.5 grains. Also .25 moa. Best $425 I’ve ever spent. Twice. It’s cold out. I’m getting 2915fps out of both loads. 24 inch barrels w EC Tuner brakes. Thanks Eric Cortina! I usually do a seating depth test then tune that in w the tuner.
@leemannelson8497 Жыл бұрын
I’m debating on a 20” lightweight hunting build with a folding stock. Probably the biggest cartridge I would dare go light with but super versatile!
@kyleschanck5945 Жыл бұрын
Thanks for all the in-site. New Remington and starting then break in. Using both ammunition you showed. Wanting to start with IMR 4831, but many things I read point toward IMR 7828SSC. Thanks again Kyle.
@PatriotPaulUSA Жыл бұрын
It really does look like the best of the 3 PRC but I already bought a 6.5PRC and have very little need for it here in the midwest. I'm looking at building a .375 Raptor or 8.6BLK ,Ar10 and Rem700 for large game right now. Both use .308/6.5Creed brass and .338 or .375 bullets to shoot sub or supersonic. Uses existing mags and boltcarriers/bolt faces just a barrel swap. 7MM PRC will be looking really good out west if it takes off, and brass is everywhere in a year or 3. Right now its about finding and using existing supplies for me.
@dinoc.5537 Жыл бұрын
Nice review Gavin. BTW, at 01:46 you mentioned the 30-06 is slightly shorter, but that is also 3.340" so with a bolt face change it will fit those actions too. I would love to hear a side by side comparison of this to the 7 LRM or the 7 SAUM when not constrained to SAAMI throats.
@jamesmooney5348 Жыл бұрын
Slightly longer then 30-06??? -is what you meant to say? This 7mm prc is going to be bigger then the 6.5 craze. Well, I think so anyway.
@rickbremmer3838 Жыл бұрын
I’m hoping this bad boy takes off like mad. It’s hard to find .30 Cal projectiles because of the 300 prc craze so this will take the edge off and make the 230 grainers more plentiful. On a side note, I’m more inclined to look at the 7 prc then the other two. It’s just an interesting cartridge with some stellar ballistics. Keep up the great vids. Love the technical stuff you present.
@don_kandon6006 Жыл бұрын
Most practical would be something in 22 inch integrally suppressed barrel (suppressed but no can sticking out), with a folding stock... it would make a rifle that fits into bagpack. Probably 7-5lbs when fully equipped and loaded. Shooting either 180 eldm, 190 berger hybrid or 195 berger hunting pill. Out of 22, 195 should definitely be able to push in mid to high 2800s. Lapua brass and temp stable powder.
@timmcfarland3311 Жыл бұрын
I noticed you’re a buy the book kind of guy, but I only use a magnum primers in the winter time. If I shoot in the summertime, you should try a regular large rifle primer. I use them in my big 300 ultra mag with 245 grain bullets and they’re way more consistent than the magnum primers.
@billfrankwurtz Жыл бұрын
I would most be interested in the 195 Extreme Outer Limits (EOL) bullets as I had sitting in my shop a 7mm Practical (out of New Zealand based on a 300WM case necked down to 7mm). The 195 is heavy for caliber and the long and ultra long range target shooting that I want to do will use that pill to its extreme... Given what you have already shown of the cartridge, I may scrap the 7mm Practical and go straight to the 7mm PRC!
@SaneAsylum Жыл бұрын
Cartridge design for hunting should start with understanding bullet design. Hunting bullets are designed to expand from 1800fps-3000fps (some claim slower or faster few reliably deliver). The longer the bullet the more potential for penetration it has (SD). The higher the BC the flatter it will fly thus extending your range. So you should look at a bullet like the Berger 195 grain EOL Hunter bullet as long for caliber with a high SD and BC, get a twist to stabilize it and load for a muzzle velocity around 3000fps (faster and you risk it blowing up on close up shots, slower and you lose effective range). That does the most that can be done with what we have available to us. The 7 PRC fills that niche nicely, with some room to grow. The 6.5 PRC does it pretty nicely too in a "short" action. It however is too long for many short actions to see the best performance since it needs 3".
@alexmills1329 Жыл бұрын
Since it’s the same case but shorter a 300 prc necked down to 7mm wildcat would be awesome. My big gripe with the 300 prc is that those 230-250 bullets are just a bit slow in them but they would make screamers out of the heaviest 7’s like that a tip
@austinsadler7259 Жыл бұрын
I would like to see how to the Nosler 175 ABLR would fit in relation to the throat. The Gunwerks guys said one of the Berger bullets they use won’t work because it’s too short.
@snowman3219 Жыл бұрын
I’m actually excited about this cartridge and the results of your load development. Damn shame the component situation is still a bi#ch
@DS-gd1xw Жыл бұрын
I'm intrigued by this cartridge. But I still like the 300 PRC
@chrisdavis4500 Жыл бұрын
Would be nice to see where the bullets sit with the chamber. I would use it with my Tikka in the long action configuration and the factory mag setup. I got a CF 8T barrel on the shelf ready to go. Was thinking about he Sherman Wildcats 7mm Mega as well.
@foonus406 3 ай бұрын
Retumbo / H1000... Large rifle magnum primers.. how hard could it be?? 🤣🤣
@WHOTEEWHO Жыл бұрын
Awesome
@Ultimatereloader Жыл бұрын
Are you going to get one? 🙂
@WHOTEEWHO Жыл бұрын
@@Ultimatereloader I am broke for the foreseeable future 😆😆😆
@micahyarlott3049 Жыл бұрын
I would buy one. If i could get powder and primers. I love my 28 nosler, and 7mm STW, and 6.5 PRC. But all of my guns are for hunting, sometimes i see what my guns can do for fun.
@jamesmooney5348 Жыл бұрын
This will be the 7MM 🐐 GOAT 🐐
@richardturner972 11 ай бұрын
Nice vid (as is all of your content). I'm curious, if loading for 7MM PRC specifically and you had a 24 and a 20 inch barrel (or were considering cutting the 24" down to 20") would you tend to want a faster burning powder for the shorter barrel? for instance, H1000 or Retumbo for the 24 inch and something like H4531 or 4831SC for the shorter barrel? or even 4350?
@foubert45 Жыл бұрын
You’ll need 61 grs of H1000, a 165 gr .277 cal projectile and a piece of 6.8 western brass
@brianreynolds1574 Жыл бұрын
The Hornady book does not even show Retumbo as an option. Im glad you tried that.
@audieladd2476 Жыл бұрын
Regarding the 14 Press Shootout, why no Redding Ultra Mag? Would you consider doing it again with all the new presses that have entered the market and adding the Ultra Mag as well?
@garrittkirchoff1672 Жыл бұрын
I just placed an order with my gunsmith to build a 28 nosler but considering switching to the 7 prc. When do you think the components will be available for reloading?
@christiansmith9414 Жыл бұрын
Tremendous!!!
@Muschka01 Жыл бұрын
What is the powder weight of the factory loads and what powder have they used?
@dhbikerczar Жыл бұрын
Who has listed load data for this? And what is the realistic (or listed) Retumbo range for the 180 eldm.
@brianlee6849 Жыл бұрын
I would love to see how it does with the lighter bullets 140 grain range. I think the super flat shooting 140 out of 7 mm would be fine for me for what I would be using it for. I don't really need to have heavier bullets for longer rain or game larger than deer. What is your opinion of the Bergara in 7 mm PRC I may be looking at getting that rifle. Thank you 👍
@sveinsoermo9883 Жыл бұрын
Blaser Custom, struggeling like h*** to find brass, Hornady bullets will also try Nosler ALR, 150 - 175 gr probably. WIll try suppressor, hopefully from A 419. Powder - Norma and Vihtavuori. Also bought a 6.5 PRC and 28 Nosler, both custom (starting to regret a bit related to the 28) - but am a 7mm adict, also have a 7 mm RM.
@unclebob540i3 Жыл бұрын
Great video as always Gavin. other than Hornady providing brass to yourself and other select high profile KZfaqrs, this brass is unubtanium. Just like the other Hornady boutique rounds introduced lately, it is just another boutique round "designed around a long for caliber bullet" and "long range blah blah blah" that really doesn't do anything half a dozen other widely available rounds won't do. It's cute and gives my favorite creators more content opportunity, but until Hornady puts some serious support behind it, and gets other ammo manufacturers to support it, it might as well not exist.
@daveenriquez7790 3 ай бұрын
Here we are, a year or so later. I'm seeing a fair amount of factory 7PRC 175 ELD-X Precision Hunter and 180 ELD-M ammunition on the store shelves, plus Hornady Brass, Peterson Brass and ADG brass. In fact, I just received 6 boxes of 175 ELD-X from Midway. I already have Magnum primers and powder, so things are looking better now than a year ago thankfully. Most of the factory rifles on the shelves in 7PRC are sold out though. Hopefully, more hit the shelves this late spring as they are apparently in hot demand.
@twissted1277 Жыл бұрын
I'm heavily invested in the 300 win mag as magnums go. and with my platform I see no reason to change. maybe later with a few years under it. I will run this. I had a 7mm mag and I found the 300 win mag to be a better fit.
@jamesmooney5348 Жыл бұрын
Yeah, be good to wait in your situation. The 300 wm is great and can be made to shoot heavier pay loads then the .284's.
@JeffHoman-eu2zb Ай бұрын
Just got a Bergara Premiere Pro HMR in 7 PRC, bought 3 boxes of Hornady 180 ELDM Match ammo to break it in with & so I would have some cases to reload. About 26 rounds of factory through it, seeing pressure signs on the cases & the groups are around 1 MOA at 100 yards. Not impressed to say the least. I have cleaned, annealed & loaded 7 rounds with 180 gr ELDM's with 63 gr of H4831SC, CCI 250 primers & COAL of 3.3500. I hope this shows some improvement.
@Blair338RUM Жыл бұрын
Be good to see some of the super premium bullet manufacturers come out with something heavier than 160-175grs. A Swift Scirocco in 175-180 range would be perfect for PG in Namibia.
@jtr82369 Жыл бұрын
Good deal, I have a full container of H1000 & mag primers so the most expensive part is done 😂😂
@redrock425 Жыл бұрын
It's crazy that that's not too far from the truth.
@tonywombolt8786 Жыл бұрын
Gavin, how do you feel about the chamber freebore and Berger 195 eols? Do you think that work well in this caliber?
@jamiedew2171 2 ай бұрын
Thanks for this video. Just bought my new 7mm PRC and need to buy my components to load for it. Do you like the Retumbo best for this or have you found another powder that works better for accuracy? My 6.5 PRC love retumbo so it would be great if I could just use it and go ahead and buy 8lbs.
@devinspeth6063 Жыл бұрын
Can I use a 7 rem mag die set somehow? I can't find 7 prc dies yet.
@guyminer2384 Жыл бұрын
They'll be available eventually. Wait for the proper dies.
@kurtbogle2973 Жыл бұрын
The best service you can be to reloader's today is to tell us where we can buy primers. Everyone is out!
@WyitAlan Жыл бұрын
I would be curious to see how you would describe the recoil impulse, specifically on the bergara build. What, common place, cartridge would you compare it too ex. 30-06 7rem mag that sort of thing
@ryansones1626 Жыл бұрын
I'm all ears as well
@InfamousTactical Жыл бұрын
I know that you likely don’t want to say a specific load. But I’m curious as to your Retumbo load. My 7RM recipe is 68.6g of Retumbo for a 180g Berger
@Not-the-only-one Жыл бұрын
Love the 7PRC great cartridge design. Good bye to that unnecessary belt. Seekins Havak in 7PRC is half MOA rifle.
@Spartan.88 Жыл бұрын
Savage High Country 24” barrel 7mm PRC
@frankspataro9714 Жыл бұрын
How would that prc shoot with 120s or 140s would it still shoot under a minute with the fast spin rate
@fisherus Жыл бұрын
I'm wondering why the Dillon XL650 won't load the 7PRC when I have loaded. 270 Winchester and 300RUM on mine with a few modifications?
@TR-ms9zy Жыл бұрын
So does anyone know where to get this stuff? Seems like everything went to the “influencers “ instead of the actual customers. I
@ssteereify 3 ай бұрын
Interesting your using Retumbo, it doesn’t suggest that powder in the Hornady’s reloading online manual. How many grains are you loading?
@halfdollar86 Жыл бұрын
Retumbo will be even harder to get for a long time now because of the 7 PRC
@dinsixiengmay9781 Жыл бұрын
The cartridge will exceed only if components for reloading and ammo is readily available and rifle as well, I'm holding off on this one for awhile, even though, I'm really super excited 😄 😊
@chipsterb4946 Жыл бұрын
TBH I stopped considering this cartridge when he got to large rifle Magnum primers. Regular large rifle primers have just become available - typically at stupid prices. I don’t have any other rifles that need large rifle Magnum primers. That said, this is the most interesting of the PRC cartridges to me. Not too small, not too big… Goldilocks would like it.
@steveelder5306 7 ай бұрын
you know you can use magnum primers in other loads that take slow burning powders? 30-06 270 even 243 and similar.@@chipsterb4946
@Ryan_YoungUSA Жыл бұрын
Have you had any issues with the shot brass resizing? Anyone? Great vid
@stevenwinegar9355 Жыл бұрын
I'd love to work up a 180gr ELDM load around 2750 fps to maximize barrel life.
@thecheapshot1065 Жыл бұрын
6.5prc, 280Aai, 7mmprc? I'm leaning toward the .284's. I have to ask for a new rifle where I actually prefer weight and barrel length and I hand load so ammunition availability is not a concern as long as I can buy brass. Is 7 mm PRC going to be that much better then 280AI both with a 1 in 8 twist barrel. I'm looking at the Browning x-bolt long-range or Western Hunter long-range both right about $1100. Both 24 or 26" barrel. I'm hoping stock they've planned on this handling a 195 grain Berger but I'm going to be focusing around the 175 to 180gr bullet weight I'm just wondering if the hype around the seven PRC is going to be superior to the 280 Ackley giving that they're both going to be running the same twist. It for a target North American medium to large game rifle. I thought about the 300 my concern is recoil. I was looking at the 6.5 PRC but inside 500-600m I think he's larger diameter heavy your bullets will just be. Honestly I don't know would love the advice
@larrymars649 Жыл бұрын
Hmmmm I Haven't seen you this excited since the .224 Valkyrie..... kinda makes me wonder
@fuenstock Жыл бұрын
Can someone tell me what the correct Lyman shell holder I need for 7mm prc?
@chug-a-lug6842 Жыл бұрын
If it catches on good and components get readily available I’m probably going to build this as my first fully custom rifle
@hmoobshow2482 Жыл бұрын
Not likely you’ll be finding any brass soon. 6.6 prc and 300 prc brass have been almost unobtainable and they been out how many years?
@dxpvxo711 Жыл бұрын
Good luck finding those primers for sale anywhere. Plus I haven't seen retumbo for sale anywhere for almost 3 years
@hmoobshow2482 Жыл бұрын
@@dxpvxo711 an abundance of Retumbo was hitting local and online stores earlier this year but pretty sure we won’t be seeing any for a few years. I think the last time they popped up was 5 years ago.
@John_Redcorn_ Жыл бұрын
Seems these PRC calibers are made for gun bloggers and magazine writers. None of us avergae joes are gonna be able to get components to legitimately get into one of these rounds. Just more hornady hype. Still waitin to see 6.5 prc and 300 prc ammo and brass in good stock
@ca2129 10 ай бұрын
Any chance more .284 bullets show up with longer higher weights? Not a lot 180grains out there
@BadKarma.- 6 ай бұрын
Has anyone load the 197gr Sierra's in the PRC yet? If so how did they perform in the 1:8 twist
@scottmccullough70 Жыл бұрын
As a duel purpose rifle standpoint. Wouldn’t the 8.5 twist make it more versatile with whitetail bullet weights, 140-160 where the 7 mag has entrenched itself for so many years? Just for pure long range, I’d agree that the 8 twist and high bc’s would rule, but I honestly see that losing favor to the 6.5 prc if deer size game is the primary interest.
@jamesspikes Жыл бұрын
I have over pressure issues with my factory Hornady 7mm PRC 175 ELDX Precision Hunter ammo in my new Christensen Ridgeline FFT 22”. I noticed the ammo is .03 longer than Hornadys reloading manual. When I chamber a round and pull it out I have rifling marks on the bullet, unsure if it’s a ammo or a chambering issue.
@Andrew-jm4tp Жыл бұрын
I noticed the same thing when I used a factory loaded 175 ELD X round to set seating depth on a new die. It came out significantly longer than the Hornaday published OAL for the exact same 175 ELD X bullet.
@waynemensen4252 Жыл бұрын
I've seen ballistic comparisons. If I didn't already have a 7 rem mag. I might consider one. 27 lbs. recoil vs. 20-23, for not that much gain. Seems like a waste of money. IMO
@USAFTACP Жыл бұрын
For all practical hunting purposes and ranges, you're right. The longer ranges is more target oriented. Is the PRC more efficient, yes. But within 500 yards dead is dead, the animal won't care.
@jeffreywilson690 Жыл бұрын
I don't need the 7mm PRC but I do want a 6 mm PRC
@wisemechanic1758 Жыл бұрын
Where in the hell did you find large rifle magnum primers?
@thejoker_5.028 Жыл бұрын
Has anyone seen any load data or created any load date to do a smaller than 150gr bullet ? I'm looking to make this my all-around hunting rifle, and I would like to do some loads with, let's say, a 130gr from barnes, maybe ? Or any other suggestions someone might have ? Still exploring the cartridge
@hardingdies7811 Жыл бұрын
I'm a Leftie - instead of building a whole new rifle, would I be able to rebarrel a left-hand Remington 700 in 7mm Rem Mag and be ready to go?
@hse785 Жыл бұрын
Yes
@Mmikejs72 Жыл бұрын
I just purchased a CA Long Range Mesa in 7mm PRC. Starting off with the factory 175 GR Hornady Precision Hunter to get brass to reload. I am seeing pressure signs with the factory ammo. Hoping to find a reload that shoots good in my gun.
@Ultimatereloader Жыл бұрын
That's strange- we didn't see any pressure signs in the rifles we built...
@Rushshooting67913 Жыл бұрын
That retumbo is worth 10000 dollars on gunripper
@masone4589 Жыл бұрын
So Hornady has all three factory loadings (160, 175, 180) listed at 3000. I wonder why that is? I’m most interested in that 160 CX for hunting. I wonder how fast you could push that thing with the 3.340” COAL?
@waynemensen4252 Жыл бұрын
Copper is incredible. Super penetrators and serious hydroshock.
@USAFTACP Жыл бұрын
It's accounting for chamber pressure for each bullet. The 180 ELD-M is just a few feet slower than the 175 ELD-X. But, when it comes to the CX the bullet causes a higher pressure, so it's loaded with less powder for the same speed to maintain the same pressures.
@shooterll7936 Жыл бұрын
I’ve been searching high and low for Retumbo for 3 years, haven’t found one grain! Has anyone else been able to locate any? The unicorn of powders lol.
@kuronyan3006Ackley Жыл бұрын
7mmPRC💪👍
@norrinradd9206 Жыл бұрын
Just get a 300 Norma. Better B.C. Better down range ballistics. Doesn't matter anyways. Can't find that powder or any Large rifle magnum primers.
@approachingtarget.4503 Жыл бұрын
Seems everyone is covering the PRC line up. While the longer profile of the projectile has good BC. Doesn't that increase surface area drag inside the barrel and down range? And doesn't a longer bullet have the tendency to be more prone to side winds? With approximately 300 fps separation between the 6.5,7mm, and 300. A shorter projectile would benefit all of them.
@cheatinggravity173 Жыл бұрын
You would think so- it sounds counterintuitive- but alas, the longer bullet with higher ballistic coefficient is affected by the wind less. Im not smart enough to explain why. There is a range at which fast time of flight and light bullets vs long time of flight and high bc favors lighter bullets for the same cartridge. Now that said, a longer bullet with the same weight (lead vs copper) will have a lower b.c. because the sectioal density is less, and it will be blown by a sidewind more than the shorter bullet becaue if the larger surface area.
@approachingtarget.4503 Жыл бұрын
@@cheatinggravity173 I could see that being the case at over 1800 fps. Above that the nose of the projectile creates a sonic wave that deters friction until it slows down. The rear bevel reduces drag on the projectile at all speeds. I also understand that a lighter bullet will drop less because of a few reasons. But air direction and deflection would effect the side to side trajectory. Not as much above a certain fps. But gradually over its entire flight path. A longer projectile would also hold in more of the chamber pressure in the barrel, but you also have more friction on the acceleration down the barrel. It's a horse a PC no matter how you look at it I guess. My point is that we can already achieve these same results with the already popular .30 calibers. Plenty more of them available! .308,3006,300, and 338. Why create more tooling and manufacturing when you can already do it with what you already have.?!!!
@Chato4570 7 ай бұрын
I want to see 7 PRC vs 280 AI
@kalindanley2843 Жыл бұрын
Oh snap! Let's have your parts list on both of your 7mm PRC builds. I wanna be a copy-cat. How about that X10 press from frankford? We would love an update if you have one.
@BabeRuth1978 Жыл бұрын
Who makes a rifle for this 7mm Prc, I can’t find it.
@BrettMcNary Жыл бұрын
savage
@BabeRuth1978 Жыл бұрын
@@BrettMcNary thank you
@TommyboyGTP Жыл бұрын
So... this, or a 28 Nosler?
@ryansones1626 Жыл бұрын
Check out the spin here kzfaq.info/get/bejne/pMuHqtqEyZi7ias.html
@cademarti1365 Жыл бұрын
28 Nosler. More energy/velocity
@ja0298 Жыл бұрын
28 nosler is also over bore, and has a shorter barrel life
@cademarti1365 Жыл бұрын
@@ja0298 yeah but it's a hunting cartridge not a paper puncher. 1000 rounds will definitely last some years it the average year has a couple dozen rounds down the tube
@ja0298 Жыл бұрын
@@cademarti1365 100% agree with you, for most it won’t be a issue. But for those that do shoot more than average deer season though it is something to keep in mind. I look at the 7 PRC as an updated 7mm rem mag. No belt, better case design, better chamber design (essentially a match chamber) and designed for efficiency. I think that for the majority of the hunters, who may not take advantage of the 28 nosler’s extra speed and energy transfer, the 7 prc is a better fit.
@Ensign_Cthulhu Жыл бұрын
The big question: what new edge does it offer over cartridges with similar powder capacity?
@ja0298 Жыл бұрын
From the podcasts I’ve listen to on the PRC line, they essentially gave it a match chamber from the start. That and not having a belt.
@kerrypurcell6022 Жыл бұрын
great video,,but,,,,,,,,,,,,yesterday i bought a 1 pound bottle of imr 4831 rifle powder 53 dollars before tax,, bullets are like buying gold,, cases are really hard to find at any price,,primers dont seem to exist,,7mm prc ammo is at least 80 to 100 dollars a box,,, like it,,but my 308s are going to be what i shoot the most,,its affordable,,
@frankserra6709 Жыл бұрын
Wonder how this 7mm PRC compares with the 7mm Remington Ultra Magnum which I have in a new Sako model 75.
@paulmeek7964 Жыл бұрын
I had one in 7 still have one in 300 RUM . Personally I think you have the better hunting round. 7PRC components are going to be hard to come by. Just my 2 cents
@frankserra6709 Жыл бұрын
@@paulmeek7964 Hey Paul, when you had your 7mm RUM. Was there any specific round/load that you found that gave you consistent accuracy. I have only one box of 20 round of the Remington 140gr. now. So going to have to reload them in the future.
@paulmeek7964 Жыл бұрын
@@frankserra6709 I used H1000 with a 140 Accubond 95.1 and WLRM primer also the 215 worked decent. Work up to this because it a hair warm but no pressure signs or sticking bolt but shot less than 1/2. Good luck
@frankserra6709 Жыл бұрын
@@paulmeek7964 thank you so much, I have noted it down.
Scary Teacher 3D Gaming
Рет қаралды 59 МЛН
Fabiosa Animated
Рет қаралды 7 МЛН
Bolt Action Reloading
Рет қаралды 884 М.