7PRCW Build Part 1: Woox Titano Chassis and Barrel Chambering
Рет қаралды 64,216
9 ай бұрынFull Story: bit.ly/3LRYYDW
UR on RUMBLE: rumble.com/ultimatereloader
UR on Patreon: / ultimatereloader
Some time ago, Erik Cortina challenged me to start shooting F-Class. I’m finally starting my F-Class build, a 7mm PRCW. In this video, we cover the new Woox Titano chassis, the build components, and the barrel chambering!
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Disclaimer:
You alone are responsible for the safety of yourself and your property.
Check local and state laws before undertaking any activity involving possessing, transporting, and shooting firearms. Check local and state laws before attempting to load ammunition or perform any modifications to a firearm. Always abide by the law. Always practice gun safety.
The content on this channel (including videos, ammunition reloading data, technical data, comments, and any other information contained within) is for demonstration purposes only.
Do not attempt any of the processes or procedures shown or described in this video or on this KZfaq channel (gavintoobe).
Any reloading data supplied on this KZfaq channel (gavintoobe) or in this video, including any comments from viewers and readers must be assumed to be in error.
Always consult at least three sources of manufacturer's ammunition reloading data before reloading your own ammunition.
Do not attempt to repair or modify any firearms based on information found on this KZfaq channel or in this video.
Gunsmithing procedures should only be performed only by a licensed gunsmith.
Ultimate Reloader, LLC can not be held liable for any harm caused to any individual or any personal property related to activities, procedures, techniques, or practices described in whole or part on this KZfaq channel (gavintoobe) or in this video.
By watching this video in whole or in part, you agree that you alone are solely responsible for your own safety and property as it pertains to activities, procedures, techniques, or practices described in whole or part on this KZfaq channel (gavintoobe) or in this video.
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Material Connection Notice:
The following Ultimate Reloader partners are featured in this video:
- WOOX
- Bat Machine
- Cortina Precision
Ultimate Reloader partnerships involve one or more of the following:
Product supplied for evaluation + testing + features in videos/articles, paid advertising and promotions, engineering and product development services, scientific testing and evaluation, external media production and related marketing services.
Ultimate Reloader LLC is committed to publishing subjective and data-driven information+insights related to products whether it be favorable or unfavorable or both.
For more information about Ultimate Reloader partnerships, please visit: ultimatereloader.com/about
@Ultimatereloader Ай бұрын
ULTIMATERELOADER10 saves you 10% at wooxstore.com ! Don't forget to use this code!
@jaymiller393 9 ай бұрын
Really enjoying the collaboration & coverage of the machine work!
@conservativesniperhunter7439 9 ай бұрын
Wow 😮, now that’s what you call precision machining. This is going to be a very interesting rifle build. I can’t wait to see Gavin shooting this awesome rifle set up at 1000 yards.
@RobinP556 9 ай бұрын
I miss building my own rifles. Years ago I took a few classes out in Colorado, TSJC, when Thomas “Speedy” Gonzales was there. He was a great teacher!
@ronmartblog 9 ай бұрын
Erik didn’t give you a Brux - he gave you a piece of unobtanium HOLY ****!!!
@MrCclimeGo Ай бұрын
AWESOME AWESOME AWESOME ‼️ ‼️‼️Can't wait to see You, Erik and John go shoot 🤙😎
@dennisshemory4859 9 ай бұрын
Love all your builds but I would like to see a build for the blue collar man can afford .
@marcmoore4115 9 ай бұрын
That'd be a really cool build tbh
@Dave-cf2ng 9 ай бұрын
As a blue collar man you should know that the skilled man should be paid for his skills.
@michaelbrown343 9 ай бұрын
What would that look like? Custom work costs custom money. If you can't save up for that, buy a Savage Axis, or Ruger American and stick it in an aftermarket stock.
@marcmoore4115 9 ай бұрын
@@michaelbrown343 there are cheaper components. Gavins build usually use top of the line components with most builds ending up being at least like $6k. There are components available to make a way less expensive rifle, so it'd be interesting to see what he would be able to come up with as a less expensive custom build.
@michaelbrown343 9 ай бұрын
@@marcmoore4115 Sounds like you have a great idea for a KZfaq channel of your own.
@logantucker8897 9 ай бұрын
Gavin, thanks so much for these videos!! I appreciate all your hard work and sharing this knowledge with us. I am considering learning machine work and chambering my own barrels because of guys like you.
@brettstewart8765 9 ай бұрын
Wow never new you did a tribute rifle for one of the greatest guitarist that ever lived, that's awesome, good onya Gav, definitely going to check that build out straight after this vid, great stuff mate cheers Yogi 👍🇦🇺
@cmcclaren11 9 ай бұрын
This is amazing, I’m so excited for this series of F-Class content
@ErikCortina 9 ай бұрын
Sweet build!
@Lixmathing 9 ай бұрын
This is the cartridge I would love to have. Ever since I heard Eric mention it in the Rock chuck Olympics I have been very intrigued. I'm excited to see the build !
@jaymiller393 9 ай бұрын
Shoot a 156gr Berger out of the 6.5prc…. Pretty close!
@marcmoore4115 9 ай бұрын
@@jaymiller393 it might be close, but it's not the same by a decent margin. The 6.5mm bullets top out at a G7 BC of .356 in the 153.5gr Berger. .355 in the Hornady A-Tip and the 156gr has .347. In 7mm you're topping out at .422 in the 190gr A-Tip, .391 in the 180gr ELD-M and and .387 in the 195gr Berger. While for the every-man, the 6.5 PRC is good enough, the 7 PRCW is still a very cool and unique option capable of more than the 6.5.
@vettepilot427 9 ай бұрын
Instead of standard 60 deg inserts, I use full form thread inserts that cut the specific thread pitch. While you need more inserts (different insert for each thread pitch), these full-form inserts cut the full thread profile including the peak and root radius. I can leave the OD a couple thou oversize and turn with the full-form insert to size. I get better looking and fitting threads and I don’t need to set the compound to 29 deg. You’re absolutely correct that you must check thread pitch and be careful doing it. I cut 23 tpi instead of 24, and didn’t realize it until the brake was almost about to screw on……….and then didn’t.
@tommywinthrop3429 9 ай бұрын
Awesome choice I have one also shooting 184gr Berger hybrids!!!! With EC tuner!!!!
@luckyshotammunitiongunsllc2369 9 ай бұрын
Gavin, you definitely need a gun wall rack. So many beautiful rifles and all we can see is barrels and breaks 😂. Great video
@airborne350g 9 ай бұрын
Love it…. I want, no, I need one.
@ronmartblog 9 ай бұрын
Oh my god, I absolutely LOVE that stock!!!!!
@2steedaq 9 ай бұрын
Cant wait to see the finished product! Great work.
@kenmcvie6350 9 ай бұрын
Looking forward to the shooting!!!
@chrisviking428 9 ай бұрын
This build is sweet!! 🎉
@ralphgarcia5197 9 ай бұрын
Whats is the difference between the 7prcw and 7prc?
@userJohnSmith 9 ай бұрын
I've driven by CST a hundred times. Always wondered what was inside. Cool stuff.
@donseman7524 9 ай бұрын
Good show thanks
@chadperry4021 9 ай бұрын
Hopefully we get some comparisons between this and the 7 prc for velocity and brass life. I like data.
@jakobusstrauss9000 9 ай бұрын
Magnificent build. Would like to see a Barnard model P action review some time in the future.
@janosvadas 9 ай бұрын
Love his channel, but it’s changed so much since I originally started watching him, he’s no longer the stuff that’s in my wheelhouse. Still cool to see his progress as his skills develop. Awesome for what you’re doing. Now make me a custom throated barrel to go on my .260 Remington ….😂. You got the lathe, I don’t.
@Ultimatereloader 9 ай бұрын
I can do that, I just did three long throated rifles for a customer. One in 240 WBY, one in 7MM REM Mag, one in 7MM WBY - fill out form at rifles.ultimatereloader.com
@janosvadas 9 ай бұрын
@@Ultimatereloader I sent your form in. I shoot a savage model 11 with a .260 Remington barrel from E Arthur Brown. As I develop my load, I want to custom throat the barrel so I can push the bullet to a much larger OAL. Yes, this will force me to go from a short action rifle to a long action to still run a magazine. Look at how far a 140 gr bullet sticks out of a 6.5X55 Swede. Kind of what I’m trying to do here.
@ericbridges9 9 ай бұрын
Waiting on the 25 prc thank you
@JacksonMalcolm 9 ай бұрын
Ive been running the 7-6.5 PRC and really enjoying it. I used it in an ELR match last weekend and placed well. Still trying to figure out a good load with the 180 class bullets but in a short action they sit so far into the case.
@mftoutdoors7483 9 ай бұрын
Thanks. Great video. I was wondering when you would do something with Erick and F-Class John.
@hunteranglin3750 9 ай бұрын
Awesome build man. Would love to see a accurized AR 15 build
@calhntr1 9 ай бұрын
The reason is the availability of 6.5prc cases made by Lapua, if the 7saum case was offered by Lapua, the 7saum would most likely dominate F open class. Same reason for the .284 brass made by Lapua, they are many different versions of the .284 winchester, .284GAP, Shehane, etc... if there were only .284 cases made by winchester, it wouldn't have been as populsr as it is. Consistently is the reason.
@thomaspadgett2269 9 ай бұрын
F Class rifles are normally single shots and magazines are typically not allowed. This stock is a 700 BDL style to be used with a magazine. Even though it is a very, very, VERY nice stock, I think a traditional F Class stock would have been more appropriate. Great video!
@howdyduty8890 9 ай бұрын
Good luck on the build. Very interested in the final build, and the chassis performance. Hoping you choose not to bed the action as Woox has suggested, and that it performs. Please let us know. Looking forward to further progress. Thanks
@robertdidion2525 9 ай бұрын
Great video, love all of the detail you go into for these builds. I would have thought @erikcortina would have suggested that you use a Borden action for that build?
@crush3095 9 ай бұрын
damn that chassis checks so many boxes
@2342Medic 9 ай бұрын
Would love to see you evaluate MPA's lug lock. Maybe it could bring greater precision to F-Class? Or maybe it's snake oil?
@eskimoreloader 9 ай бұрын
Cool content
@barbarapiercy4312 9 ай бұрын
Getting ready to build my own rifle which is a precursor to building a rifle with my own wildcat cartridge. I’m terrified!!!! There’s so much that can go wrong. Going to take my time and do it right ……the first time!!!
@charlesloraine911 6 ай бұрын
Make sure you bed the chassis, I have the Titano stock, and there is too much for aft movement for consistent accuracy. I also installed a Graco rifle graco-coil system that was an experience with the laminated stock.
@Ultimatereloader 6 ай бұрын
Good call- Agreed, I just bedded this stock last week.
@aggieof10 9 ай бұрын
Had bad experience with Woox (horrible chassis that was warped by 1" between the action and fore end). Seems many people have had similar issues, surprised Gavin is using them.
@abnermiller5758 9 ай бұрын
Love your videos. Curious on that wood though it looks an awful lot like birch or maple with walnut stain, rather than walnut wood.
@kenbrown873 8 ай бұрын
question on the Chassis and how do you plan on opening the barrel channel to fit a 1.25" barrel.
@FullSendPrecision 9 ай бұрын
I'm not sold on the reamer holder.
@frowe2049 9 ай бұрын
Would be very interested to see details of your tail stock to saddle stop fixture as well as how you made your fixed reamer holder. Good content. Thanks.
@Ultimatereloader 9 ай бұрын
For the reamer holder, check this out: kzfaq.info/get/bejne/epxnnaeeqrGYpZc.html (Be SURE to use two screws to secure the reamer, one inboard and one outboard). More details on tailstock, etc coming!
@adamn5725 9 ай бұрын
Does the Woox Titano come with a trigger guard? My action is a Rem 700 SA Clone…therefore can I use the floorplate that comes with it?
@otterconnor942 9 ай бұрын
It would be interesting to see if installing a slave nut and torquing it before reaming the chamber effects anything.
@dvskane1808 9 ай бұрын
This is why I just buy well made rifles. Bergara , Tikka, Christensen. Ya you can do better but damn that was a lot of work. Not everyone has access to those tools, or more importantly the knowledge to use them correctly.
@gregorygardner1719 9 ай бұрын
We do a lot of things very similar but I do have a couple questions if you don’t mind. With your set true chuck does your barrel extension show you were your barrel run out is and at what position do you find it best to click your run out. Myself I use 12 and or 6. Not real sure through my own testing it makes much difference but I do set mind at 12 or 6 Also with your set true, I noticed that you have a lot of chuck jaw contact. How does that play out if your chucked up on a taper? Reason I’m asking is that I am interested in adding the machine you have to my shop. I have made barrel extension in the past for my big grizzly 1640 Gunsmithing machine but I never felt I had the rigidness I wanted while using them. Great video!
@bobbywinn6548 9 ай бұрын
Can you educate me on why you choose 90ftlbs. Torque on the barrel to action?
@lucasv3825 9 ай бұрын
What's the advantage of the 7PRCW over the 7 PRC?
@nazirafridi8457 9 ай бұрын
How is 50 bmg manufactured and what parts are used in it and how is its fitting .and what iron is used in it .i like 50 bmg
@user-tu1lc8cf3k 8 ай бұрын
What VNMG holder and inserts are you using?
@howdyduty8890 9 ай бұрын
Gavin, it appears your Titano is built for bottom metal and magazines? Looking at all the F-class stocks I can, I’ve not seen any with that bottom metal cut out. Am I missing something?
@Joesshopandoutdoors 9 ай бұрын
The dial you use is a 513-504. That doesn’t look like the stylus length that indicator comes with, can you let us know what length you are using if it’s different?
@allenclayton7 9 ай бұрын
What scope are you going to use?
@scottsquires6186 6 ай бұрын
Think you should have used Borden action
@jared2163 9 ай бұрын
What profiling tool is that you cut your tenon with?
@davefulcomer2336 9 ай бұрын
It's a VNMG insert, but I am curious about his tool holder
@2342Medic 9 ай бұрын
Surprised with the action... no Borden action considering the build is inspired by Erik.
@meidamx 9 ай бұрын
Get some.
@2342Medic 9 ай бұрын
Can't wait to hear about load development on this. I'd like to know if the reamer lets you load 175 Bergers past the neck shoulder junction to create more case capacity and prevent donuts, or did you add freebore? I've been thinking of building this or similar on a medium action.
@FullSendPrecision 9 ай бұрын
That reamer is set up for Berger 180 Hybrids
@2342Medic 9 ай бұрын
Backfire did an interview 4 months ago "5 Best Cartridges for Long Range Shooting" where he said that Erik's load was 175gr projectiles going 3000 fps.@@FullSendPrecision
@FullSendPrecision 9 ай бұрын
@@2342Medic I promise he’s shooting 180 hybrids.
@2342Medic 9 ай бұрын
That's what I'd shoot too@@FullSendPrecision
@7400fish 9 ай бұрын
Do you index barrels
@possumpopper89 9 ай бұрын
What does the “W” stand for? In PRCW.
@romansdzalbs 9 ай бұрын
Wheeler (Alex Wheeler)
@tonydevich7937 9 ай бұрын
I like, and ya I want to do my own work
@jasonrad9332 9 ай бұрын
🤘🏻
@magic4221 5 ай бұрын
What is difference between 7 prcw and 7 prc?
@t2kAll 9 ай бұрын
question ! when is 30-06 PRC/Creed/etc. comming up ?? anyone :D
@seanu3414 9 ай бұрын
Could you do a video on budget reloading for ar rounds?
@guyminer3168 5 ай бұрын
Coming soon! Within a couple of weeks.
@brantsfgds 8 ай бұрын
What is the finished barrel length?
@howdyduty8890 6 ай бұрын
How’s the F-Class build going?
@davefulcomer2336 9 ай бұрын
What is the proprietary tooling mentioned at 24:48? The scotch tape?
@Ultimatereloader 9 ай бұрын
It’s something we’re looking at filing a preliminary patent on shortly!
@davefulcomer2336 9 ай бұрын
Great content by the way, I really enjoy the long format
@tonydevich7937 9 ай бұрын
Are you going to try f-class
@cronjevandermerwe8864 5 ай бұрын
Were is part 2
@michaelkneale7524 9 ай бұрын
Check this out. First with CUSTOM Long Action Woox Furiousa Terminus Zeus QC and Southern Precision Rifle chambered Bartlein 26” in 7mm PRC 5 shot group .25moa @ 200 yds. Phenomenal!!!
@FullSendPrecision 9 ай бұрын
Skip the compound... You'll get better threads
@jeffb.3052 9 ай бұрын
What do I think about this build so far? Send me the finished rifle to try and I'll let you know. lol
@r.awilliams9815 9 ай бұрын
7PRCW?
@johnbishop1911 9 ай бұрын
6.5 prc necked up to 7mm
@geeccc5674 9 ай бұрын
6.5 prc necked up to 7mm
@calhntr1 9 ай бұрын
7prcw is based on a 6.5prc case necked up to 7mm, (totally different from the longer 7prc) this particular version is called the 7prc Wheeler after Alex Wheeler. There are several versions of the 6.5prc necked up to 7mm,
@r.awilliams9815 9 ай бұрын
@@calhntr1 I see. So, about the same case capacity as the 7mm SAUM. I'm guessing that brass availability has something to do with this wildcat, since 6.5 PRC brass is readily available and 7mm SAUM...not so much.
@lenzadlberger 9 ай бұрын
@@r.awilliams98156.5 PRC Brass is available from Lapua that is the Reason
@johnskinner6204 9 ай бұрын
so dood, your channel name is ULTIMATE RELOADER. When is the last time you discussed or reviewed or had any content on reloading? presses, dies, powder measures, prime/deprime options... and actual reloading content? huh?
@SigmaBallistics 9 ай бұрын
he released two reloading related videos this past week. i feel like if he released any more videos on the things you mentioned he would be beating a dead horse… i feel like you need to look harder at the videos he already released in the past, because there are so damn many of the things you literally asked for above.
@Mahziar69 6 ай бұрын
What happend to this series still waiting for the final build
@guyminer3168 5 ай бұрын
We were able to shoot it yesterday. Outstanding results! Video coming soon...
@Mahziar69 5 ай бұрын
@@guyminer3168 sounds good man can’t wait to see
@scotttaylor3258 7 ай бұрын
hey want to sell that reamer for the 7prcw
@EDesigns_FL 9 ай бұрын
I'm surprised that there isn't a shoulder on the barrel to interface with the receiver. It's far more accurate than relying on threads, which should only be used to hold parts together, not for registration/alignment.
@FullSendPrecision 9 ай бұрын
There is a shoulder on the barrel.
@EDesigns_FL 9 ай бұрын
@@FullSendPrecision You're correct. I wasn't clear and should have said socket. An interface between two parallel faces doesn't do much to maintain accurate concentricity.
@FullSendPrecision 9 ай бұрын
@@EDesigns_FLIt seems to work fine for guys shooting 1 inch groups at 1000 yards.
@EDesigns_FL 9 ай бұрын
@@FullSendPrecision If you're not changing/removing barrels, very careful with handling the rifle, and checking scope alignment before every critical shoot, it might be okay; but it's not the best method of attaching a barrel. Threads should not be used to maintain concentricity or alignment. You'll likely find that serious competitive shooters have modified their receivers or use models that don't rely on threads for accuracy. It's a fairly simple modification to cut a registration step into a receiver and add a companion section to a barrel.
@FullSendPrecision 9 ай бұрын
@@EDesigns_FL- Bull. You're making things up. Find me these fictitious shooters.
@Just_Samson 9 ай бұрын
🤤
@warddanger 9 ай бұрын
my wallet needs to unsubscribe from this channel
Ultimate Reloader
Рет қаралды 76 М.
BBC News
Рет қаралды 299 М.