7PRCW Part 3: Bedding & Break In (Incredible Results)

  Рет қаралды 40,357

Ultimate Reloader

Ultimate Reloader

Күн бұрын

Full Story: ultimatereloader.com/kzhf
UR on RUMBLE: rumble.com/ultimatereloader
UR on Patreon: / ultimatereloader
Ever since I met Erik Cortina, I’ve been curious about F-Class. It’s finally time to shoot my very own 7 PRCW! Check out this video, the third part to my 7PRCW Build Series!
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Disclaimer:
You alone are responsible for the safety of yourself and your property.
Check local and state laws before undertaking any activity involving possessing, transporting, and shooting firearms. Check local and state laws before attempting to load ammunition or perform any modifications to a firearm. Always abide by the law. Always practice gun safety.
The content on this channel (including videos, ammunition reloading data, technical data, comments, and any other information contained within) is for demonstration purposes only.
Do not attempt any of the processes or procedures shown or described in this video or on this KZfaq channel (gavintoobe).
Any reloading data supplied on this KZfaq channel (gavintoobe) or in this video, including any comments from viewers and readers must be assumed to be in error.
Always consult at least three sources of manufacturer's ammunition reloading data before reloading your own ammunition.
Do not attempt to repair or modify any firearms based on information found on this KZfaq channel or in this video.
Gunsmithing procedures should only be performed only by a licensed gunsmith.
Ultimate Reloader, LLC can not be held liable for any harm caused to any individual or any personal property related to activities, procedures, techniques, or practices described in whole or part on this KZfaq channel (gavintoobe) or in this video.
By watching this video in whole or in part, you agree that you alone are solely responsible for your own safety and property as it pertains to activities, procedures, techniques, or practices described in whole or part on this KZfaq channel (gavintoobe) or in this video.
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Material Connection Notice:
The following Ultimate Reloader partners are featured in this video:
- BAT Machine
- Woox
- Cortina Precision
- Area 419
- Berger
- Colorado School of Trades
- Hawkins Precision
- Lapua
- Longshot
- Short Action Customs
- Precision Matthews
- Vihtavuori
Ultimate Reloader partnerships involve one or more of the following:
Product supplied for evaluation + testing + features in videos/articles, paid advertising and promotions, engineering and product development services, scientific testing and evaluation, external media production and related marketing services.
Ultimate Reloader LLC is committed to publishing subjective and data-driven information+insights related to products whether it be favorable or unfavorable or both.
For more information about Ultimate Reloader partnerships, please visit: ultimatereloader.com/about

Пікірлер: 104
@josesuro3981
@josesuro3981 5 ай бұрын
You are about to get hooked into the ultimate precision game. If you consistently make competitive open F-class rifles, and shoot them, the sky is the limit! Well done.
@InfamousTactical
@InfamousTactical 5 ай бұрын
Don’t over think f class. I have placed top 3 with my 7mm off an atlas bipod and gamechanger. All about staying with the wind with an accurate rifle you are confident in. As with most competition, the hardest step is going to your first match. Go have fun.
@mr8610
@mr8610 5 ай бұрын
That stock is gorgeous. So glad I’m starting to see more pimped out wood stocks.
@chriscarbaugh3936
@chriscarbaugh3936 5 ай бұрын
Yeah 😎
@billgoodwin3053
@billgoodwin3053 5 ай бұрын
7PRCW is what I was hoping Hornady was going to release when they released the 7PRC. I think the 7PRCW would make a perfect SA hunting round for big game and that is what I would be interested in seeing in the future.
@hmoobshow2482
@hmoobshow2482 5 ай бұрын
Ummm 7 saum
@RobinP556
@RobinP556 5 ай бұрын
Marine Tex and Kiwi Neutral Shoe Polish. That’s what Thomas “Speedy” Gonzales teaches. Works great, does not shrink or change dimension. The Kiwi Neutral releases well and unlike so many release agents you’re bedding to the action and not the release agent.
@scottbeverly188
@scottbeverly188 5 ай бұрын
I've been following your channel for a while and as always you never disappoint. I love your new build and I think you have a winner, so when you get it tuned, go win some competitions for us. You couldn't have chosen a better mentor than Eric Cortina. Eric is it for the wins and for the love of the sport and is always willing to help anyone who shows a genuine interest. Keep us updated on the load development and how well the Cortina Tuner improves your shot placement. I am building a Savage Axis budget rifle in 223 Rem. and so far I have swapped the factory barrel for a Criterion (1-7), machined my own oversized bolt handle, and started load development. I have an MDT LSS Gen 2 chassis on the way, but even with the factory stock that I had to shave down to accommodate the 1" bull barrel, it is shooting one-hole 5-shot groups. Well, at least one group out of the first four groups is one hole for five shots. Thanks for the content and keep them coming.
@francoisdavel1786
@francoisdavel1786 5 ай бұрын
Its a top fuel dragster of a rifle. Precision is achieved through 3 key ingredients: Barrel, Bullets, Brass in that order. You have a good barrel that has been machined properly and bedded in a solid chassis. The Berger bullets are legendary, perhaps only surpassed by the precision of monolithic bullets like Peregrine Gliders. Need I say anything more about Lapua Brass???
@JohnBrown-mh9ii
@JohnBrown-mh9ii 5 ай бұрын
With Eric giving you his expert advice, I mean, that’s like a drop the mic 🎤 deal. Reading the wind is key to be a long distance shooter. Doesn’t matter if you ‘the best equipment money can buy’. If can’t read and adjust for the wind, you’re just pissing in the wind.😂
@Gunner1972
@Gunner1972 4 ай бұрын
ERIK
@1320pass
@1320pass 5 ай бұрын
That's a beauty! Already showing great accuracy.
@normankaster917
@normankaster917 5 ай бұрын
That is a really really good looking set up Gavin...i can't wait to follow along and see what becomes of your testing, plus with Eric and F-class Jon's input on the shooting techniques.
@sdvc244
@sdvc244 3 ай бұрын
Hi, shooting 308 in a pierce action LH with 185 Juggs, started last year in August at 3, 5 ,6 and 9 hundred meters here, love the build you did and all the info, Awesome Thanks
@novicereloader
@novicereloader 4 ай бұрын
Great build! Good job emphasizing the practice and training part.
@conservativesniperhunter7439
@conservativesniperhunter7439 5 ай бұрын
Awesome rifle build Gavin 👍. I think that you will do well at your first F-Class match and will have a great time to boot.
@joshuaclettify
@joshuaclettify 5 ай бұрын
Need one! Always love the builds!
@rickschwertner282
@rickschwertner282 3 ай бұрын
Great video. Thats a beatiful looking and functioning rig
@mikeolinger9227
@mikeolinger9227 5 ай бұрын
For my interest Gavin, incredible video. Congrats, I think you're about to get "hooked". F Class is a special challenge.
@RexusOutfitters
@RexusOutfitters 5 ай бұрын
Sharp-looking gun! Good stuff.
@javiersp01
@javiersp01 5 ай бұрын
Really happy for you Gavin, congratulations !!
@Ultimatereloader
@Ultimatereloader 5 ай бұрын
Thanks so much!
@davidmerriott7356
@davidmerriott7356 5 ай бұрын
Looking forward to the f-class shoot!
@kellyrick4365
@kellyrick4365 5 ай бұрын
Awesome rifle. You're working with the best, so you'll be fine... Good luck!
@user-qp3eb4pm1zfatcatreloading
@user-qp3eb4pm1zfatcatreloading 4 ай бұрын
Beautiful rig. I like the wood for looks.
@brucegillespie654
@brucegillespie654 5 ай бұрын
Oh I can’t wait you’re going to be with Eric and John on your belly learning from some of the best . Wind calls can’t wait to learn from you all . I don’t shoot FClass but do shoot from a bench in the mid range game . I love that stock .My guess is a new front rest will be in the cards soon lol . Thanks for all your sharing.You keep good company with those boys
@Gunner1972
@Gunner1972 4 ай бұрын
ERIK
@chriscarbaugh3936
@chriscarbaugh3936 5 ай бұрын
Wow, amazing load !
@AxisPrecisionWorx
@AxisPrecisionWorx 5 ай бұрын
Great vid Gavin!
@guybalasso3682
@guybalasso3682 5 ай бұрын
Love the rifle very nice work. Well done mate great work
@unkulwilly
@unkulwilly 5 ай бұрын
nice! love the Woox stocks.
@joshuamiller873
@joshuamiller873 5 ай бұрын
Maybe using the mirage at your range could help you read wind. If you see it moving, and have a wind meter set up, it could help guesstimate the wind at a match.
@kriswilson5400
@kriswilson5400 5 ай бұрын
I'd recommend you neck turn the Lapua brass if you're going to run that, and cut into the neck of the brass because you're going to introduce donuts after the first firing. The donut won't be a problem if you have enough freebore, but if you intend to play around with seating depth (a big jump will work with this cartridge) then the donut might cause issues. The ADG brass shouldn't suffer from this. Your build otherwise looks alright. I wouldn't use the Woox in an F-Open match, I'd get a proper F-Open stock that has a longer surface area at the butt of the rifle.
@conservativesniperhunter7439
@conservativesniperhunter7439 5 ай бұрын
Awesome rifle build Gavin 👍. I think that you will do very well at your first F-Class match. I also think you might just want to shoot more of these 1000 yard once you try it.
@dickcampbell6512
@dickcampbell6512 5 ай бұрын
Always impressed by your content.
@cacinaz8802
@cacinaz8802 5 ай бұрын
Gavin, talk to Erik about how he drills (hollows) out the base of his bullets on a lathe. That is one technique he uses to achieve such tight groups at 1K yards.
@Vintovka
@Vintovka 5 ай бұрын
FYI that was an April Fools video!
@larrydesantis9800
@larrydesantis9800 5 ай бұрын
yah, it was a good one too!!!
@ryankertai2907
@ryankertai2907 Ай бұрын
Would be super interesting to see you do a shorter barrel 7PRCW for hunting. A modern 7SAUM without the non-existent brass issue.
@Ultimatereloader
@Ultimatereloader Ай бұрын
I love that idea!
@ryankertai2907
@ryankertai2907 Ай бұрын
@@Ultimatereloader I was about to pull the trigger on a 7SAUM but now i'm holding off until I see some data for 20-22" barrel on a 7PRCW pushing the same heavy 175-180gr projectiles
@petrx1276
@petrx1276 5 ай бұрын
I love this scope. I get one for my hunting rifle. Yes, it is heavy piece with1,1 kg. It has perfect glass and precise mechanic for this price, in lover magnificiation it is bright, in high it is little bit dark, but i don´t need spotting scope for hunt for roe deer.
@glockparaastra
@glockparaastra 5 ай бұрын
Stunning rifle!
@jaciemiller7927
@jaciemiller7927 5 ай бұрын
Gavin, have you looked at Pro Bed 2000? An actual bedding compound developed by Charlie Robertson at Score High Gunsmithing.
@robertspina1494
@robertspina1494 5 ай бұрын
Gavin build a U style bench. If you go to Barbourcreek long range shooting you will see the benches and how they are set up. You will need to build the front of the bench longer so that you are behind the gun instead of just off to the side. Behind the gun is also how you will be for F class. I have a portable table that I put in the back of my truck that has left and right hand shooting positions which works good on prairie dog towns for two different shooters even shooting both right handed. The U-shaped table will only allow for one shooter. I’m making it with a big 1 inch threaded seat, so that I can raise it up and down per size of the shooter. I really like the way Barbour Creek. has their set up for shooting out of an air-conditioning building and getting on the floor and shooting prone. I really wish you could do that on your range. Right now for my bench. I’m waiting on a piece of inch and a half flooring plywood for my table top so I can build bracing so that it doesn’t bounce. I’ll take a picture of both my tables and I get my plywood for this one.
@robertspina1494
@robertspina1494 5 ай бұрын
Barbour creek on U tube of Course
@rustynut1967
@rustynut1967 5 ай бұрын
I never cared for the T shaped benches. It feels awkward hanging off the side and having one arm flapping in the breeze and get consistently in the same position.
@thomasbarlow4223
@thomasbarlow4223 3 ай бұрын
Always wondered about bedding a rifle with cabosil thickened fiberglass epoxy resin
@joelclark2130
@joelclark2130 5 ай бұрын
Do not mess with the seating depth, And the tuner at the same time. Run each test individually then go from there. And that's why you have a tuner on there, so you don't have to mess with seating depth. Otherwise get rid of the tuner and just go with seating depth Test
@Ultimatereloader
@Ultimatereloader 5 ай бұрын
Yes!
@johnbishop1911
@johnbishop1911 5 ай бұрын
I've always used white shoe polish as a release agent. It almost feels like Redding imperial sizing wax.
@kihara4244
@kihara4244 5 ай бұрын
Would love to see you do a build with a Lothar Walther barrel
@francoisdavel1786
@francoisdavel1786 5 ай бұрын
N555 will compromise barrel life compared to H4350
@cjamonwilliams
@cjamonwilliams 5 ай бұрын
Need to see a video about reloading belted magnums...
@daveknowles3055
@daveknowles3055 5 ай бұрын
Need to go to Texas and shoot the Black Jack Challenge with Erik Cortina
@ChristopherStewart-qv2nr
@ChristopherStewart-qv2nr 5 ай бұрын
Working on a PRS rifle in 6.5 Creedmoor, between you and Erik I'm thinking I may go 7mm PRCW.
@RecoilReport75
@RecoilReport75 5 ай бұрын
Leke new watch Gavin. 😂👍🏽
@jeffmiller2433
@jeffmiller2433 5 ай бұрын
I hate shooting on concrete benches myself. I would choose my portable bench wood top any day.
@anthonyrstrawbridge
@anthonyrstrawbridge 5 ай бұрын
Looks like a good start. My hand is a bit shaky and my eyes are failing but that action looks to have a big hole where it shouldn't. Also, the end of the no taper barrel looks awful big. Aside, from that it's looking good but couldn't see the trigger or safety. I suspect the spin velocity of the 6.5 is much much more stable from start to end but you're sure to prove something. ✌🏼👶🏼🚬
@US2A
@US2A 5 ай бұрын
Inspirational, I just got a new rifle I need to make awesome.
@SigmaBallistics
@SigmaBallistics 5 ай бұрын
marinetex or devcon titanium: recommended by speedy as being the most stable
@robertdidion2525
@robertdidion2525 5 ай бұрын
Gavin, I am really surprised that you did not use Erik Cortina’s go to Borden action and Khales scope?
@flooded3456
@flooded3456 5 ай бұрын
Get this rifle to 21lbs and the recoil will be minimal. Also you will find a node around 2925 which allows the intent of the magnum to shine.
@utdesertghost199
@utdesertghost199 5 ай бұрын
Looks like you need to head down to Eric's place and shoot the blackjack challenge.
@matthewkoppitz3250
@matthewkoppitz3250 5 ай бұрын
Why did you decide to bed the action without the barrel? Gordy likes to bed with the barrel on the action.
@rustynut1967
@rustynut1967 5 ай бұрын
I think Speedy does it with the barrel mounted also and sitting in the shooting rest, the same as it will be used.
@renotimberwolf2139
@renotimberwolf2139 5 ай бұрын
I did not see anything about “breaking in” in your video?
@PassionforRifles
@PassionforRifles 5 ай бұрын
Would love to see how accurate it was before bedding, and then after. I have been thinking to bedding my KRG Whiskey-3 chassis, would it help.
@ianlowe9310
@ianlowe9310 5 ай бұрын
Cool build. Can you advise what weight you ended up at with scope and bull barrel?
@floydmiller3288
@floydmiller3288 3 ай бұрын
I like 7828 7 stw
@InkwellFoto
@InkwellFoto 5 ай бұрын
Do you use those spacers for the action screws for the bottom metal on Woox (specifically the Furiosa Ultra) chasis?
@roselwcampbell
@roselwcampbell 5 ай бұрын
I wish someone would neckup the 6.5prc to 358 diameter so I could have the old Rem 6.5 rem mag and 350 rem mag combo rifles, in the new PRC configuration.
@beesoutdoors8418
@beesoutdoors8418 5 ай бұрын
Would love to see a oddball like a 6.5x55 Se your vids helped me a lot with a few things I do in my shop
@Ultimatereloader
@Ultimatereloader 5 ай бұрын
We've been wanting to do that build, and to compare with 6.5 Creedmoor :)
@beesoutdoors8418
@beesoutdoors8418 5 ай бұрын
@Ultimatereloader Think that would be a great video and would show what the differences is and cancel out a few theories 🤔
@IMPACTSHOOTING
@IMPACTSHOOTING 5 ай бұрын
Gavin, scrap my 7PRC build and rather build a PRcW please
@AlexSlarve
@AlexSlarve 3 ай бұрын
Dying to know the charge weight :-)
@sstevens7
@sstevens7 27 күн бұрын
I would love to buy this exact rifle setup. Is that possible?
@daviddahl4148
@daviddahl4148 5 ай бұрын
Awesome Rifle! Just curious why you use just his tuner, instead of the ec tuner brake?
@linwood2761
@linwood2761 4 ай бұрын
No brakes in f class
@williamsweet7511
@williamsweet7511 5 ай бұрын
nice looking rifle, I follow your videos regularly, I may have missed it, but the 6.5 prc/7prc-w is a medium action round... how are you using it with a short action, the Wooxs is a short action stock?
@SigmaBallistics
@SigmaBallistics 5 ай бұрын
Single shot sir
@wyattlavallee8078
@wyattlavallee8078 2 ай бұрын
What do you use for a seating die for this
@kenbrown873
@kenbrown873 5 ай бұрын
How did you get the 1.25" barrel to work with the Woox. as the channel for the barrel only free floats a 1.20" barrel?
@larrydesantis9800
@larrydesantis9800 5 ай бұрын
he milled it out to fit
@kenbrown873
@kenbrown873 5 ай бұрын
@@larrydesantis9800 the barrel or the stock?
@codycole134
@codycole134 5 ай бұрын
How do you think this round would do for a hunting rifle?
@Ultimatereloader
@Ultimatereloader 5 ай бұрын
I was thinking the same thing :) A comparison to 7 SAUM would be interesting...
@adamn5725
@adamn5725 5 ай бұрын
With the Woox Titano chassis - was it absolutely required to do bedding ?
@Ultimatereloader
@Ultimatereloader 5 ай бұрын
No- not required, but I felt like it would remove one possible variable!
@adamn5725
@adamn5725 5 ай бұрын
@@Ultimatereloader I have the Titano too but with a 300 WSM…I did not bed, have not test fired yet…in Alaska - too cold at the moment. Seeing your results made me think about going down that route 👍
@shawnhuber9917
@shawnhuber9917 4 ай бұрын
i would like to build it from real!
@patrioticguy1791
@patrioticguy1791 3 ай бұрын
Why don't F-class rifles have brakes or tuner-brakes? Is this common throughout the discipline or just EC's preference?
@Kylef7735
@Kylef7735 2 сағат бұрын
Muzzle brakes are not allowed in F class.
@erikhayrapetov5177
@erikhayrapetov5177 5 ай бұрын
Ok ❤ klass hay 416 barerrt relod plis
@jamesspikes
@jamesspikes 5 ай бұрын
Why not just use 7prc
@Ultimatereloader
@Ultimatereloader 5 ай бұрын
Big difference! Short action -vs- Long Action
@GreatLakesLogger
@GreatLakesLogger 5 ай бұрын
I'd love to have you build me a 6 dasher, but it looks like you'll be way too busy if you can build a good f-class rifle!😩
@MMBRM
@MMBRM 5 ай бұрын
I think what I always think when you show a few three shot groups. We have no idea how the gun is actually performing because 3 shot groups can easily vary by 60%. The gun looks like it could be really good but we don't know. I cannot count the amount of groups I've shot with where the first three shots go into 0.1 and by 5 it's around .3. I won't deny that you did some top notch work putting it together and the likelihood is high that it's going to perform very well. Also think it's great that you're going to learn from some really good shooters as that's the quickest way to get better. Good luck on your journey. Show us some relevant accuracy testing!
@scottinohio701
@scottinohio701 5 ай бұрын
WHAT does Eric and Speedy use to bed???????
@chazt4863
@chazt4863 3 ай бұрын
Eric uses Marine-Tex
@whiplash636
@whiplash636 5 ай бұрын
F-Class is lame. Unlimited sighters. Who has the most expensive equipment. No real skill.
@Kylef7735
@Kylef7735 2 сағат бұрын
Thats why they decide the winners based on receipts and not who shoots the highest score....oh wait
@whiplash636
@whiplash636 Сағат бұрын
@@Kylef7735 Are you even a shooter yourself, or are you just kissing someone's ass?
7PRCW Build Part 1: Woox Titano Chassis and Barrel Chambering
27:42
Ultimate Reloader
Рет қаралды 64 М.
Erik Cortina F-Class A-Z (With F-Class John)
55:41
Ultimate Reloader
Рет қаралды 42 М.
🤔Какой Орган самый длинный ? #shorts
00:42
Red❤️+Green💚=
00:38
ISSEI / いっせい
Рет қаралды 82 МЛН
39kgのガリガリが踊る絵文字ダンス/39kg boney emoji dance#dance #ダンス #にんげんっていいな
00:16
💀Skeleton Ninja🥷【にんげんっていいなチャンネル】
Рет қаралды 8 МЛН
Action Bedding, are you doing this?
18:26
MarkandSam AfterWork
Рет қаралды 81 М.
7 Cartridges Better Than 7 PRC
16:47
Backfire
Рет қаралды 173 М.
First Sizing After Fireforming
12:34
Winning in the Wind
Рет қаралды 31 М.
Ep. 2 Zeiss Sub-MOA 1 mile challenge.
36:13
X-RING
Рет қаралды 254 М.
TESTED: Remington 700 Long Range 300 Remington Ultra Magnum
17:22
Ultimate Reloader
Рет қаралды 260 М.
This .243 is a RINGER!!! [.243 AMMO TEST]
14:15
WHO_TEE_WHO
Рет қаралды 38 М.
7-6.5 PRCW - What is it and why?
35:46
Kris Wilson
Рет қаралды 10 М.
Why Serious Long Range Shooter Only Use This Die
9:41
IMPACT SHOOTING
Рет қаралды 76 М.
3 Ways to Measure Headspace
10:41
Ultimate Reloader
Рет қаралды 149 М.
7mm SAUM vs. 7mm PRCW - 1,000 yard pair fire match
20:51
Erik Cortina
Рет қаралды 41 М.
🤔Какой Орган самый длинный ? #shorts
00:42