Could you help me find some? They’re sold out every where if you could find me some please send me the link!! Thank yoy

@@julianmurillo9200 I’ll check bro

@@HorsepowerLabs thanks dudee

How did u bypass the ballast??

@@drakusbeats5265 tapped into the wires before the ballast

Dr. J. The DIY Car Guy thank you!! I appreciate it.

Thanks bro and I have a link in the description for them bro

kelz thank you.. now others see it can work with HID models

@@HorsepowerLabs Exactly! Which is a plus as it was never shown before until now.

Life With LB ayyy thank you

Queencity Auto styling thank you

Strange World thank you

Thanks bro I appreciate it

Where did you get them?

Should take 1-2 hours depending on how fast you go. And you skill

Thank you 😊

Yeah there is a way just tap into the cars headlights wire. You can also build your factory lights to look good

I have to switch on my lights but that’s how I have it set up. You can set it up to run the DRL and parking lights with fog lights also.

It’s connected to my lights so when I turn them on it turns on too

Thank you and Yessir I did. I put a link to in in the description

@@HorsepowerLabs cool and thank you. Just ordered them

They gave t-taps but not enough

Thank you. And those are plug and play. What hid adapter did you use? You have a link

@@HorsepowerLabs I used the link that somebody provided in the comments below. Through ebay

@@guissepenaranjo190 let me know how they work for you

@@guissepenaranjo190 update?

You can replace the bulbs and no issues yet

Christopher Garcia I tapped into my parking lights that way I can turn it on and off

Horsepower Labs Thank you, will be getting mine in this coming week. Thanks

Yeah you have 2 t-taps one is for + and the other -. So find that pos ang neg wire run the wires long side the lights wires and push the metal piece down to create the bond

@@HorsepowerLabs thank you sm for answering bro i appreciate it

Ever Reynoso there is a silver screw behind it it can be adjusted there

testosterone johny dumbbells I’m trying to get that too

You could I believe there is an adapter out there, I didn’t know that at the time

Talking about the screws on 4:30

@@ItsFlips-jg3tr 4;30??

I just used screw driver and 10mm I think

I have a link to it in the description. I think it is H11

I have factory HID and run the lights

Yes that too lol

djbillgates thank you.. I left 2 links to the headlights!!

I can’t seem to find the link for the lights ??

Nvm I found them. Although they have the chrome ones they done seem to offer the black with clear lens. Guess I’ll just keep shoppin around

Came in the box

How*

You put both wires through the t-tap and the inside would make a cut and connect them

Blessings bro. I still have the car lol. It’s manual swapped now. Check out the new vids but have you tried checking the wire connections?

I believe they have some now

I tapped into the hid wires to get power to them

@@HorsepowerLabs what connectors did you use

@@TheSupreme111 you can use t-taps

I’d say look up the bulbs size for the lights (might be in the item description) and search Led high beams.

@@HorsepowerLabs Hi, I'm a sub, love your videos, quick question: I bought the Akkon version of these assemblies because they were the only one in stock but they come with the same instructions and are likely the same thing. I also have factory HID's and took it to mechanic for installation and showed him your video. He could not figure out how to get the high beams connected at all so now I have no high beams lol, how did you connect those?

@@watchQueenETV thank you I appreciate it. Yes it’s the same thing. Tbh all I did for every light was was tap into each one. So the high beams I think have its own connector just tap into that. Check and let me know if not I will try to get behind the lights and show you. You can always DM me @realgmaxine_

Yes you can and I did.. I have a video of me changing the bulb to LED

Yeah I just installed and that’s it. Although I might raise them a bit idk just me 😆

@@HorsepowerLabs so your using the adjuster on the headlights assembly or just moving the entire assembly up on your own? I'm just asking g cause I'm ordering si.ilar lights and don't want to have to adjust em. Rather they just be aiming the right height out the box.

@@allenanalla2549 to me they were aiming the right height but it might just be I need to advise and retighten the assembly

Johnny cashh you can adjust the headlights to aim up some more

Horsepower Labs the bulbs ? Or the actual projecter part ? Cuz I was able to adjust the bulb but it didn’t do much justice ... the actual projecter part I wasn’t able to move , it’s built into the frame of the headlight :-(

Johnny cashh you can adjust the projector. There is a screw looking thing on both sides

So does the tint effect the light a lot? I am debating between these and the original headlight assembly with a black housing because I don’t want the light projection to be poor with smoked outer lens tint. Do these come with clear tint? And can I add my own led light bulbs to these instead of halogen?

Manuel Lucero yea it’s clear lens the inside plastic is black so light won’t be affected . And yes you can add LED I believe which I’m doing just waiting to get a good set

Stuart Bernard they are amazing

Horsepower Labs keep up the good videos just subscribed 💯💯

Stuart Bernard thank you I appreciate it bro..

Ms Sheila you can open both lights up and transfer hid wiring into the new ones. Or instead of the connectors tap into the wires like I did.

@@HorsepowerLabs is there no plug and play HID/LED kit for these headlights

I’m having the same problem it’s not compatible wit xenon hids so what easy method to use or get ???

Deox i didn’t tap into the ballast. I went to halogen because I am going to LED soon.

@@HorsepowerLabs ahhhh so is it like....you changed the cable kind of? Got rid of the harness for the ballast n what not?

Deox yeah i ditched the ballast and bulbs since the bulb wouldn’t fit in the new housing and the didn’t brighten the road enough. So I want to do led. But you’ll see which kind

@@HorsepowerLabs I see, I guess ill send these back and stick with my hids, but yeah I also plan on switching to leds for the fog and high beams

Deox check the comments here there is someone who who knows of an adapter to make your HID work with them.

It’s for the aftermarket headlights. Like the one I have on. Not the OEM

Im sure someone makes them for 2018 but idk if this brand does

Thanks

No condensation. And I used the T-Tap included to tap into the lights

Yes

Yes I run LED

@@HorsepowerLabs how? My headlights came with some weird light bulbs

@@HorsepowerLabs how did u convert those weird halogens to LED?? Sorry for bugging man

@@artm87ful I have a video showing how I did it and which bulbs I used. And the bulbs are in the description

You probably could and that would be cool 😎

Gawd Dre admin

Could’ve sworn he doesn’t tune Maximas with a CVT unless you’re doing a Swap

Gawd Dre was going with him but now I have a different one

Stefflon Wan I have yet to decide I’ve been speaking with a few tuners. I’m going to post a video of getting it tuned

Horsepower Labs you definitely should. I’ve been looking for a tune myself. where are you located?

Stefflon Wan Im in Florida.

I did video coming soon

I think Akanii. I have a link to them in my description

To out on it doesn’t take too long if it’s plug and play probably 2 hours give or take.

@@HorsepowerLabs I have a 2014 Altima. I replaced my headlight assembly! Could I replace my halogen bulb with a hid or led?

@@tealx2014 yeah just look up the bulb size and search for HID or LED

@@HorsepowerLabs Thanks!

Plug and play for the Halogen models. If you have HID you need to do some work to make them work

@@HorsepowerLabs how do i know which one i have 🤣

@@dallas3719 if they are yellow it’s halogen. If the lights are a bit blue they are HID

@@HorsepowerLabs well damn i’m colorblind lmao

okay well i found out i have HID, what all do i need to do? do you have a clear vid on that?

Nicholas Smith yeah I saw that!! They are getting popular

Do u know if and when they will be getting more in stock?