How to remove trim from 7th Gen 09-14 maxima. Any questions feel free to ask
Пікірлер: 94
@MrPacMan366 жыл бұрын
I have this video, and a bunch of other videos on a public playlist for the 7th gen Nissan Maxima. I recently had some small soda spillage into my gear shifter, and this video helps immensely! I'm so glad that I had it on my playlist and remembered that I did
@chrislouis76118 жыл бұрын
Wow thanks for this video, I just bought a '12 and I plan to change the head unit in the future. I didn't know taking out the radio was that simple. I guess I should say thanks to Nissan too!! lol
@FLdancer003 жыл бұрын
Did you change the head unit? Which one did you get?
@themoneyshotcrew63186 жыл бұрын
great video. helped me out a lot!
@aayw62595 жыл бұрын
Very good video. Can you show how to remove the whole plastic around the shift gear? thank you.
@eds.63484 жыл бұрын
Exactly what I needed for my 2010 Nissan Maxima....Thank you.
@user-xx4vd1yr4m7 жыл бұрын
Hey i was wanting to wrap my door handles and the chrome door trim on my 2010 maxima. Are these difficult to remove?
@FearGod_NotSpeeed2 жыл бұрын
WhT about that piece under the head unit that’s in front the shift knob
@dwansdobbs17268 жыл бұрын
How to u remove the instrument panel cover for 2014 maxima
@jeffkeel64324 жыл бұрын
HOW DO YOU REMOVE THE THE CENTER ARMREST IN 2009 MAXIMA
@LTXQR Жыл бұрын
I dropped a penny inside of the cup holder lid (side/inside) under the actually cup holder and I’m not sure how I can get it out helpppp it’s not affecting my lid but I can’t stand knowing there’s a lost penny inside there
@drecamp95072 жыл бұрын
Can i replace the cup holder this way too? Or is there hidden screws from below
@IVHYPER5 жыл бұрын
im having trouble putting the cover on the one behind the cupholder do you know an easy way to put it back you should honestly make a video of putting everything back
@onewayoranother33702 жыл бұрын
Same did you figure out how to do it
@BUZINezz1003 жыл бұрын
How do you take the top part off or does it have two screws at the top
@travismincey36017 жыл бұрын
Marko I noticed that you covered every panel but the one on the bottom in front of the shifter that has the seat warmer controls. How do you remove that one?
@carlosesparzavazquez47533 жыл бұрын
That one is hard to get to but I got it out but it’s a PITA lol
@isaaccruz68652 жыл бұрын
How do you remove the rear cupholder lid?
@MH-fb6dd2 жыл бұрын
Did you wrap it yourself or get a kit.. if so what website?
@shanemassingille53627 жыл бұрын
has anyone had to remove the inside door lever? The manual lock is not working properly.
@jamesearls72417 жыл бұрын
can the Aux port me fixed on my 2012 max s
@alisonstringer2131 Жыл бұрын
I’m trying to remove my cupholder. I do not know how
@grady.stu.83003 жыл бұрын
Thanks for this
@frankfalice82796 жыл бұрын
Can you show or explain how to remove the black pillar panels on the outside of the door?
@MCved6 жыл бұрын
i never removed that before
@user-mw1ue3ce7e3 жыл бұрын
How to remove the screen frame
@Sjbren6 жыл бұрын
Hi I am wondering how to take off emergency brake housing. I accidentally dropped a credit card in there and can't get it out.. please advise. Thank you!
@MCved6 жыл бұрын
the ebarke is on the floor im not sure there is a housing for it
@genocide23252 жыл бұрын
How do you remove the trim on the part where the heat seaters and rear window shade buttons are?
@tim61468 Жыл бұрын
I was hoping you got an answer on this as my buttons have fallen into the trim on my Maxima
@derekrobles1197 жыл бұрын
would the ac control wires have to be stretched if they were to be relocated in the glove box? or would they reach?
@MCved7 жыл бұрын
I am not sure of that. Might have to be stretched a little to relocate it there
@JBWHITEGT7 жыл бұрын
I have a 2012 maxima and the glove box is starting to get a gap on the left side of it closest to the radio. Is there a way to readjust it?
@MCved7 жыл бұрын
I really don't think so
@antioneenglish74167 жыл бұрын
hey i got 2012 maxima sv. I have color monitor... If i purchase the navi screen would it work since its basically the same?
@MCved7 жыл бұрын
im not a 100% sure about that one
@ironwolf19k666 жыл бұрын
Hey Marco I was just wondering where you got all the trim pieces from I've been looking to get those trims I have a maxima too but I want to get the stock blue wood trim color for the parts of it I have
@MCved6 жыл бұрын
i vinyl wrapped all the pieces
@ironwolf19k666 жыл бұрын
Do you know of any stock blue wood wrap or pieces you can buy for all pieces
@BUZINezz1003 жыл бұрын
I’m trying to change my screen in my Nissan Maxima 09
@snookz918 жыл бұрын
do you know where to purchase a wood frame looking one to replace it with the current one
@MCved8 жыл бұрын
you can replace it with another wooden vinyl pattern
@austinjacobsen85578 жыл бұрын
Hey! How did you remove the piece that has the seat warmer switches on it?
@MCved8 жыл бұрын
look on my channel. I made a video for that too
@starkycarrillo8 жыл бұрын
ok mad max thanks
@Leek2x5 жыл бұрын
Did you wrap your trim? If so, how? Lol its so clean!
@MCved5 жыл бұрын
yup, i wrapped it a few times with different colors
@Dan-ic9xn7 жыл бұрын
Hey man how r u? I have 2014 maxima s and as you know no navigation no colored screen Can i convert the head unit( or the middle audio buttons) to sv type ?
@MCved7 жыл бұрын
im not to sure about that. there was only two cords behind the unit with my sv model.
@juliekillian58664 жыл бұрын
My cup holder lid is stuck and won't open, do I have to take the whole console out to see what's wrong with the lid?
@MCved4 жыл бұрын
check the hinges on both sides, it might have moved out of place
@Majok236 жыл бұрын
Where did u get the red push to start button cover and carbon fiber ring?
@MCved6 жыл бұрын
its a GTR push start. it works on the maximas and i just wrapped the ring
@Majok236 жыл бұрын
Thank you
@donnelmoss7573 жыл бұрын
You didn't show how to move the heated seat panel
@BUZINezz1003 жыл бұрын
Ok I need help I don’t want to spend money if I can do it myslef
@UNKA7575 жыл бұрын
I would recommend spending 10 bucks for a pry tool kit so you don't damage the interior. Also, if you are gonna go caveman on your removal, at least put some painters tape on the tip of that Screwdriver.
@juliekillian58664 жыл бұрын
thank you for sharing, my cup holder lid was stuck and I didn't know how to get to it.
@LashChanceBeauty8 жыл бұрын
Hey Marko I'm looking to purchase a 2013 Nissan Maxima that has Wood Grain that i do not like....if it is the original dash and console can i still pop in out like this and where could i order a Black console and all the other pieces that you just popped off? thanks so much!
@MCved8 жыл бұрын
they all come off the same way, you can either get it painted or wrap it. I'm not sure if a different unit will order other then aftermarket
@kylosolo88157 жыл бұрын
+Marko Cvetic do you know how to get the aux power the one behind the shift out,the one that only comes on with the car I have a nickel stuck in mine and if tried almost everything to get it out any help would be appreciated
@MrPacMan367 жыл бұрын
kylo solo a vacuum or strong tape. If anything, a drop of superglue to the nickel and a string or stick of some kind rested on the drop. Let it dry and pull up.
@that6spdmax5 жыл бұрын
What wrap did you use?
@MCved5 жыл бұрын
avery carbon fiber
@QVR-ti7ce7 жыл бұрын
Where did you get that carbon fiber trim looks nice?
@MCved7 жыл бұрын
www.metrorestyling.com/
@pauldelayed54817 жыл бұрын
it is impossible to put the cup holder trim back on
@MCved7 жыл бұрын
its a pain but you have to cut the vinyl a little short so it can clip back on
@pauldelayed54817 жыл бұрын
Marko Cvetic from where also i already broke on of the teeth that clips on at the bottom and it was put back on flush but the top part only the left side is flush and the right keeps poping off should i just order new piece
@aj-lhe6 жыл бұрын
dude i ran into the same problem, any luck?
@t.g.fbinkydadon57136 жыл бұрын
How to put the gear shift back on
@MCved6 жыл бұрын
T.G.F Binky Da Don out the chrome piece on the shifter stick then put the shifter on and push down, while holding it down put the clip on to hold the shifter down
@144Donn Жыл бұрын
There are not many other things in life that are so nerve wracking as pulling off and potentially messing up, the car's interior! "Well done" does not do this video justice! Amazing calmness and proficiency!
@kiddfwea12908 жыл бұрын
Why are you doing this to her this is murder 😰😰
@MCved8 жыл бұрын
+Kidd Fwea i wanted to vinyl wrap the interior
@IWeasel8 жыл бұрын
I'm confused why buy the car and do this to it smdh wow
@rjgamingandfun5 жыл бұрын
Legit man. Thanks. Needing to replace the middle shift area. Has lot of scratches
@sttammanytransparency36114 жыл бұрын
My dash would fall apart if I tried this lol
@starkycarrillo8 жыл бұрын
you now how remove the dashboard
@MCved8 жыл бұрын
almost the same way, I believe there was like clips, one on each cover and it comes right off
@babuln088 жыл бұрын
What did you use for your carbon fiber? I'd like to do the same.
@MCved8 жыл бұрын
+babul522 3M 1080 series carbon fiber
@babuln088 жыл бұрын
+Marko Cvetic will it work on the outside trim?
@MCved8 жыл бұрын
Yup
@babuln088 жыл бұрын
+Marko Cvetic hey man, I ordered the carbon fiber film and have started to wrap the interior of my car trim but I am stuck where you put the cup holder trim piece back together. It won't snap back into place for some reason.
@MCved8 жыл бұрын
work from left to right and give it a little force when you push down it will snap into place