That rifle with an 18 inch barrel, red dot sight, and 160 grain round nose bullets would be a perfect woods/still hunting rifle. 👍

I love the aesthetics of the 22" barrel on the 6.5 version better than the 20" barrel on the others.

I have been a fan of your shows for years. I would like to see you add a short segment of classic Michael Bane soapbox rant. Whatever is on your mind, just go for it! Your series is called Triggered after all.

Always great information, Thank you !

Greetings from another Coloradan. I love henry guns but I wish they lengthened the action to accept larger magazines

I should have bought the Henery.. But I just bought a new BLR in 308 and the first 5 shots of new ammo only 2 went off. light primer strikes. doing some research online Thousands people with the same issue. I got 3 answers. Grease in the bolt assembly , Timing issue, or head space issue. One guy said to take the stock off and soak the action in some kind of solvent for 24 hrs then blow it out with air gun. not what I want to do with a brand new gun. So I used some carb cleaner and a air hose. Still having misfires. I loaded 5 empty casings with federal 210 primers 4 went off. loaded 5 with WLR primers only 3 went off. 5 with CCI 200 and 250's none went off.. very little dent in the primer. The hammer hits the back of the bolt face and stops and the firing pin still has to travel another 1/8 of an inch before it touches the primer, I don't know how any rounds go off ? no solid contact between the hammer firing pin and the primer. I put all the casings that didn't go off in the BLR in my rem 700 bolt gun and they all went off no problem ... Put the BLR in my chest freezer overnight the first 6 factory shells didn't go off the 7th one did. Iv been reloading for close to 50 yrs and never seen anything like this. Don't trust this gun for anything its junk. This is the only brand new gun out hundreds that I had to spend days trying to get it to fire every time, Still cant figure it out. Its going back..

I really wish they’d put the tube on the Long Ranger - not as a magazine but just for show. The Henry just doesn’t look right, or as good, without it.

I really like the Henry long ranger . I've been thinking about getting one in 308 but the only thing that is holding me back is I can't find any good micrometer sights for it. I saw like a ghostring that you can put on it but I want a real quality micrometer sight that will mount on the receiver just like the old Williams or Lyman or redfield. Do you know of anybody that is making you good sight for this rifle with quarter MOA click adjustable windage and elevation ? Thank you for any info that you have

If you say Henry hit a home run than Browning was the first

My name is also Henry lol