Out of all 8, I probably have the most expensive problem😭

1. Broken motor mount 2. Broken transmission mount 3. Broken CV axel 4. Bad U-Joint 5. Transmission failure 6. Damaged shocks 7. Damaged leaf springs 8. Lose bolts or components

Excellent straight and to the point definitely subscribed thank you so much quite helpful!

Dang man. I buy and sell cars so I see it all. You have helped me so much. I just want to say thank you for all the knowledge. It’s isn’t easy to find but when I do a google search for specific issues your videos always pop up to help me find the solution

Thank you so much for taking your time and making this video.

Best type of content. Thank you for your positive contribution to the world! Super helpful

Great video fast and to the point.

Rattling noise Corolla 2002. With a check engine light on. Changed water pump and tensioner pulley. Still rattles on and off . Check engine light comes on every 5 to six days. Thank you very much.

SUCH A GREAT VIDEO! 👏 SERIOUSLY! THANK YOU SO MUCH! YOU HELPED ALLEVIATE SO MUCH OF MY ANXIETY!

Thanks man very helpful

Phenomenal video 10/10

well done said

Your video was awesome. I possibly have either 1-4 not.. 02 Kia Sedona. When you put it in gear it seems like it wants to die but it's fine in P or N. When we try to accelerate we get a clunking sound from the front an it Boggs down as it's clunking like then all of a sudden it sometimes takes off Or we just barely press the gas. Most of the time we have to put it in low gear #1 an shift upwards. #3 gear is where we drive it most of the time cuz you try an go to D- drive it clunks but not as bad almost like a chug .sry it's so long

How would test the transmission mounts on a front wheel drive 2009 ford taurus?

They should give double ❤❤ for the vids like this! Now a vid on Difficulty?

I Love how You Skooled Us

Thanks... I've got doubts all of them apply to "when accelerating" condition, for example damaged shocks and leaf springs? I would think these would produce some noise on the move whether you are accelerating or not.

Tapping nose when decelerating. What do you think is the issue on my 2004 ford explorer XLT?

Would any other problems featured in this video, other than the transmission issue, turn on the dash check engine light?

What about wheel bearings or tie rods?

Please make more vids!

Hello. Questions mine 2013 ford escape sel. And makes weird sound when I accurately only after I warm up it stops lil

Mine only clunks till 40 mph then all is quiet. We have 150,000 miles on it and I know I need to shocks n struts but wasn’t sure about that damn clunking. But I will definitely check the CV joints. I hadn’t thought of those. I also haven’t had it on the hoist is some time since I’ve been batting cancer.

My 2018 MB GLA45 AMG rattles when changing gears usually from 1-3. Whenever i tap the gas ever so slightly it rattles. While driving it goes away, while braking still nothing, but with acceleration it rattles. Would you know what could this be?

Thanks man ✅that temu list 😵‍💫☹️

The clunking only happens between 2-4 gear shifts, and can be felt within the actual pedal. Does this give any indicators?

I have 2019 infinity qx60 when I’m stop traffic lights or stop sign I hit gas panels I hear the clucking sound after car running the sound is gone the sound coming just I hit gas panel what is problem?

This is a problem with the 2017 Explorer. If you quickly release the accelerator while shifting from 1st gear to 2nd gear or 2nd gear to 3rd gear, a noise will be heard from under the driver's seat. Also, when operating d->r or r->d in a stopped state, noise is made. Please help me.

My 08 cobalt 5 speed is sounds like its knocking when i excelerate idle high and low when in neutral then dies

Mine grinds on acceleration and hard to get in gear I seen my top motor mount rubber is coming apart

Helpful, I think! Big thud when start moving and thought was tranny, but after watching, thinking it is more likely a mounting issue of tranny, motor, or drive train if that has a mount. Once moving, no issue with transmission shifting, noise, whatever, so vid helped me realize that. TY. 08 lincoln mkz is any thoughts. Will get it on rack to see if mount issues.

What's that purple thing at 0:15

Just got my rear bushing replaced and for some reason I hear a clunck noise everytime I press on the gas. It only clunks one time everytime I push on the gas. Any idea why this could be happening? Also I hear a whine noise. Bushing is from Z1.

I have a ‘06 GMC sierra 1500. When I put it in 4x4, I hear a loud clunking/banging coming from the front end when I press the gas pedal. I replaced the hubs and CV axles and it still persists. It only does this in 4x4. When it’s in rwd it runs as smooth as can be.

I have an Audi TT 2016, yesterday I pulled away the car about 120 Mph on the motorway and all of the sudden a continuous loud metallic knocking sound appeared. I slowed down immediately as I actually thought something extremely serious has happened and eventually disappeared. Now once I'm above 60mph that continuous sounds appears always . Any thoughts ?

I haven’t found a fix yet my car makes like a spoke clicking type of noise and it only happens trying to accelerate into a turn but if I roll into the turn the noise doesn’t happen and it brings resistance and not there when going faster than 40-60

My 2005 F150 5.4 started shaking and shuttering when I had accelerated too fast. My idle is smooth and it does it even when in park or neutral it feels like a motor mount with the shaking but I have a check engine light that’s on that happened at the same time. I can’t check the ODB because it has no power, so I’m baffled on what it could be. last time I had this issue it was a bad coil but my idle is smooth. It also shift gears fine when driving it’s just a constant vibration.

I replaced the intake manifold on my 2015 Chevy Cruze LT. Now the loud clunking and ticking noise is loude. It jerks and idle high rpm an traction litght and engine light flashing fast. Can you help

1. Broken motor mount - bad 2. Broken transmission mount - investigating 3. Broken CV axel - ok 5. Transmission failure - ok 6. Damaged shocks - fixed 8. Lose bolts or components - ok A little more $$effort$$ and I will solve my problem... Focus 2015 MT/ 65k miles.

My Honda clunks each time I press accelerator pedal after driving around for a while at a stretch. Can you narrow down the list for me based on this piece of information? BTW your quick video seems to be very useful! Great job.

But It Is Fixable? Nothing To Trip Over?

don’t forget to check pulleys and serpentine belt!

My 05 4Runner produces a loud tick when i press the gas pedal. When I brake and then let go it also makes the same tick. Hopefully one of these is the solution.

Hello, I have a Ford focus 2015 and it rattles when I accelerate but I can't accelerate all the way. It only goes up to like 25 mph when I gas it doesn’t do anything

KNOWLEDGE

My front left side only pops when I turn fully to the left side would that only be the left cv axle?

my rear end clunks/kicks and lags when i accelerate fast from a dead stop. im guessing the transmission or the diff.

my car makes a clunking noise when i let off the gas? what can cause that?

Very difficult Difficult Medium Lightweight Manageable 😊

What could it be if it only does it when you accelerate hard. I can push the accelerator 75% and get up to speed no problem. Smooth no noise. Soon as I push on the accelerator 85-100% I get a grinding down the middle of the car/ arm rest area. It's a all wheel drive. No codes. All new brakes and rotors and tires.

I have a ticking noise that u can hear at a lower speed and it will go away when at a high speed. Anybody has any idea of what it could be?

mine makes the clunking noise when i go from p to d and vice versa, or when i accelerate there’s a small half second delay and clunking sound

It can also be the starter teeth worn out or flywheel

Surprised 0 mention on lifter valves

Mine only clunks for a second at like ten mph right when it first or second cold start doesn’t happen when heated up

Oh great,i have to replace all 8.😂

What I hate most is see a video, ask a question and the person who created the video never answer. Why make a video then? My Kia soul 2012 has 69 K miles, all components should be fine. once I move back or front it make a noise like Klunk. Sway bar link are new, struts are news, sway bar bushing new, even new lower arm control with ball join. Do you think could be Bolts and nuts been tighten without the car seat down on the floor? like those people recommend tighting the bolts with the tires on the floor?