8 Cool 3D Printed Models You Can Try This Week

Рет қаралды 315,051

Жыл бұрын

Here are 8 Cool models you can 3d print this week. As always thanks for watching and happy 3D printing! Big Thanks to today's video sponsor ELEGOO. Check this 3D Printer out here - bit.ly/3oKdmpq (affiliate link)
Models:
TableTop Phone portal - www.thingiverse.com/thing:588...
Designed by BSGMiniatures
Incense holder - www.thingiverse.com/thing:589...
Designed by Tripletaker
Joke 3D Printing mug - www.thingiverse.com/thing:562...
Designed by DaveMakesStuff
Chubby T-Rex pen cup - cults3d.com/en/3d-model/home/...
Designed by IK3D
Cable organizer - www.printables.com/model/289859
Designed by DFV Tech
Desk organizing Cube - cults3d.com/en/3d-model/home/...
Designed by Monkey3D
Phone Holder - cults3d.com/en/3d-model/gadge...
Designed by MATHIEU_BZH
Ikea Pegboard cup - www.printables.com/model/8697
Designed by MoshiBin
#3dprinted #3dprinting #3dprinter

Пікірлер: 142

@wwv Жыл бұрын

2:30 the irony of the double layer shift on an i love printing mug... priceless.

@PunakiviAddikti 8 ай бұрын

Double bruh moment

@cooperlee-clay9134 16 күн бұрын

I would also intentionally stop the print at like %90 completion to make it look like the nozzle clogged XD.

@daliasprints9798 Жыл бұрын

The portal would be amazing tweaked to be a charging stand (just drop in, no need to fiddle with wire) and phone configured to automatically show portal animation while charging).

@WildRoseBuilds Жыл бұрын

Yeah that would be an easy tweak! Great idea!

@LemonCraft_ 8 ай бұрын

Thats a nice idea!

@kittyninjaproductions3714 6 ай бұрын

I totally want to print one now and not just for my miniature photography! 😻

@reverendfawkes6138 5 ай бұрын

I smell a remix.

@duanemassey4560 2 ай бұрын

One of the worst ways to kill your battery is charging while the display is on.

@mjordan812 4 ай бұрын

I like the clock in the background - adds a bit of reality to the process.

@darrennew8211 8 ай бұрын

I'm thinking the phone portal would be a great idea for people who do 3d printed table top RPG terrain. Like, how many ways could you add in a phone to your D&D campaign and have it add to the experience?

@rjakiel73 7 ай бұрын

What filament did you use for the portal? It looks fantastic!

@The_Eldest_Millenial 8 ай бұрын

PSA: Even normal PLA is mildly abrasive and brass contains LEAD. NOTHING printed from brass is EVER "food-safe".

@CrazyCoupleDIY 7 ай бұрын

love the cup.. I am going to print 100 of those now

@christophkruse6639 7 ай бұрын

What filament did you use on the phone holder? Looks insane

@RoseKindred Жыл бұрын

1:24 is great but please be careful. I use those "special" incense in the past and the coal can burn through to the holder. Most of them self-extinguish out but I have had a few burn down through the wooden holder I had. Perfect use of that washer.

@frostxr 9 ай бұрын

Do they smell as bad as everyone says it does?

@RoseKindred 9 ай бұрын

@@frostxr The backflow incense? Depends on the type and who you get it from. There are many good scents that I use on a ceramic version. Sandlewood, dragonsblood, matcha.

@theMerzavets 7 ай бұрын

Great video! Thank you. Can you be so kind to explain how to sync shooting with certain plate and extruder position? Thanks in advance.

@axelhopfinger533 Жыл бұрын

Just always so relaxing to see those beautifully lit builds grow smoothly to a chill tune! You keep on making these, ya hear me? 🤗

@WildRoseBuilds Жыл бұрын

Haha Thank you for watching. These are just as relaxing to make 👏🏻

@Yoriichi_Official Жыл бұрын

this is awasome

@attackJattack Жыл бұрын

Your print quality and video production is phenomenal!

@GaryMcKinnonUFO 8 ай бұрын

Love it, liked and subbed :)

@fahmialias Жыл бұрын

great timelapse!! can you make a tutorial video about your timelapse setup?

@ghostymost7138 3 ай бұрын

I have just started getting into 3d printing and have been looking at different channels and have found a few interesting ones. One of my favorite channels and one i recommend to anyone getting into time lapses is a small channel called "Black cat 3d" they are a very new channel and have just started making time lapses of all the different things they make. The channel is super nice when responding to commens and i feel they should have more subscribers and support.

@Yoriichi_Official Жыл бұрын

And i rlly want a2D printer like ur man this is the best man

@ericvail4459 Жыл бұрын

The first one look awsome

@WildRoseBuilds Жыл бұрын

Yeah that’s a cool model!

@ericvail4459 Жыл бұрын

Very cool I love ur vids

@glaezz.4162 Жыл бұрын

Maybe it's can added arduino, lcd, etc Night lamp haha

@ramboaripratama1992 Жыл бұрын

Love this❤ sir, what camera u using?

@arthemus6683 Жыл бұрын

Good work bro !

@WildRoseBuilds Жыл бұрын

Thanks 🔥

@walterbryan1798 Ай бұрын

Some cool builds!

@deanlegg418 Жыл бұрын

What are you burning on the cicular item? You could make the tray modular , so you remake the burning parts

@pieronompleggio3910 Жыл бұрын

What filament did you use for the IKEA cup and incense holder?

@StormBurnX Жыл бұрын

The phone holder has a hole in the back specifically so you can route the cable out of the way! A little surprised that didn't make it into the video, your attention to detail otherwise is stunningly high as always Also this is the first video where more than one thing is actually relevant enough for me to save the video for later, this is rather exciting for me! I will be attempting to make four of the things from this, at least, perhaps even more depending on how many people like them as gifts haha👍

@StormBurnX Жыл бұрын

(incense burner for my roomie who's always going through incense cones; USB/SD desk organizer for me; yawning dino for an artist friend who loves dinos; and gonna try and do the phone holder but bigger so it can be a tablet stand)

@WildRoseBuilds Жыл бұрын

Awesome glad you got some inspiration! For the charging cord hole I opted not to use it as it makes picking up your phone pretty cumbersome. Thanks for watching!!

@zvc_3DPrint Жыл бұрын

cool👍🏻👍🏻

@dersaubrenner Жыл бұрын

Nice 3d prints. What kind of filament do you use for the phone portal.

@WildRoseBuilds Жыл бұрын

3d jake sparkle grey eco pla, they’re my go to for fancy filaments

@dersaubrenner Жыл бұрын

@@WildRoseBuilds very cool, thanks for the info. Incidentally, great time-lapses :-)

@kazukiuchiha522 Жыл бұрын

That clean overhangs on the cup! thats amazing! i struggle with curling edges from overhangs with my MK3S+

@WildRoseBuilds Жыл бұрын

Have you tried a temp tower? I actually needed to raise print temps with a pla+ to stop curling on overhangs which seems counter intuitive. Thanks for watching!

@kazukiuchiha522 Жыл бұрын

@@WildRoseBuilds after reading that curling results from poor cooling, I tried to lower the print speed für the wall shells, and set the fans to 100%. A print that was knocked off by the nuzzled cause of the overhangs printed fine with this settings, but still, the overhangs look messy..

@lucho3Dpe 25 күн бұрын

I also made an incense holder and put that iron ring on it but it burned my piece, any recommendations to prevent it from happening???

@tierarigby5451 3 ай бұрын

Can you add a link for the incense holder

@nps-ddpsavinglives 8 ай бұрын

What software is used for the video to take out the print head? Very cool affect1

@Rook0759 3 ай бұрын

id like to know this as well. my first thought was, something green was placed on front side of print head, any editing software can then just remove the print head altogether...hmm idk

@Rook0759 3 ай бұрын

i just searched for how-to info. there's lots of vids to guide you. though, it seems some gear will have to be purchased. raspberry/octo pi and logitech cam.

@Rook0759 3 ай бұрын

kzfaq.info/get/bejne/aKloeKiZ0N2ldIE.htmlsi=lzcLt7V4rjyevEqf

@thorgeist666 Жыл бұрын

salut , quel filament vous utilisez pour vos objets ? vous ne mettez jamais de supports ?

@shhstaysilent Жыл бұрын

Love your videos, I have an Elegoo Neptune 3 Pro myself, I just can't get my prints to consistently stick to the bed. I have tried many things, and I have noticed that you have changed from the stock Elegoo PEI bed to some other one. I would really appreciate it if you could name the brand of the PEI bed you use. Your prints always seem to stick well which is a dream for me!

@WildRoseBuilds Жыл бұрын

The stock bed is actually just as good! I unfortunately fused some petg to mine and marked it up quite bad. Give it a really good scrub with hot water and a sponge then a wipe with isopropyl. The one I switched to is an ultistik brand one

@shhstaysilent Жыл бұрын

@@WildRoseBuilds Interesting! Maybe the one i got is defective? Or maybe my filament? Appreciate the feedback, again, love your videos.

@truantray 9 ай бұрын

Set the first layer height lower, and wash the PEI with soap and water. Isopropyl just dries oils back down to the surface. But for prints with a smaller contact area, a thin layer of glue stick solves a lot of problems. Also, you can increase bed temp to 65C for PLA and 75C for PETG.

@shhstaysilent 9 ай бұрын

@@truantray Wow! Thank you! I will definitely use this. It has been very long since I have used my printer lol, I have simply been too busy since it's troubles have been to burdening.

@cheezagon Жыл бұрын

What printbed are you using?

@mattscriver7452 Жыл бұрын

What incense holder? I'd love one

@3dragonprints458 Жыл бұрын

What is the filament u used in the first print

@bjarkebuskbjerg743 Жыл бұрын

What kind of filament is that? I love the way it glitters!

@matiyossoyitam7596 Жыл бұрын

Why no answer? I like it too / want buy it :) thank you

@matiyossoyitam7596 Жыл бұрын

Oh sorry - answer was: „3d jake sparkle grey eco pla, they're my go to for fancy filaments“ from WildRoseBuilds

@msfitoyfactory4692 4 ай бұрын

where to find the portal animation app?

@nihlil 9 ай бұрын

The portal, print it larger and put a 7 inch tablet in orso ;)

@user-wb7fj8xo3i Жыл бұрын

Cool

@im_cent 5 ай бұрын

ahh the portal would be so awesome if there was an app to flick it to roll dice or something hehe

@Ilike2makestuff2 Жыл бұрын

realy cool what camera do you use?

@WildRoseBuilds Жыл бұрын

Thanks! LUMIX gh5 😉

@Ilike2makestuff2 Жыл бұрын

@@WildRoseBuilds thank you I will look to yours that for my timelapse😁

@jernejfunkl8300 4 ай бұрын

What did you light on top of the 'fountain' (second video) to create this fog? I really like this fog 'fountain' :)

@ZackestTV 3 ай бұрын

Thats a backflow incense cone

@jernejfunkl8300 3 ай бұрын

Thank you :)@@ZackestTV

@carbide1968 Жыл бұрын

i love that phone portal. a must get.

@jorgemoreno6028 4 ай бұрын

😀 the cup of coffee is good

@zvennn Жыл бұрын

Best channel for 3D printing ideas. ❤️

@WildRoseBuilds Жыл бұрын

🥰

@pistolao_vr 3 ай бұрын

The joke muggle got me laughing a little too much...

@Legace28 Жыл бұрын

:O What slicer do you use?

@WildRoseBuilds Жыл бұрын

Prusa 2.6 😉

@mynt4033 5 ай бұрын

You should consider giving away your finihsed builds to a local tabletop game shop so they can use it in their props. So as to not go to waste

@Amazing__toys 9 күн бұрын

我想看2:10燃燒完後金屬片確實把PLA融化了的畫面你怎麼能沒拍到呢 :))

@wesleydutoit6901 Жыл бұрын

Noice!

@WildRoseBuilds Жыл бұрын

Thanks for watching!

@mikepatton2738 Жыл бұрын

How do you set up your Timelapse so the camera slowly rotates? (1:21)

@WildRoseBuilds Жыл бұрын

An extremely finicky camera slider 🥲

@mikepatton2738 Жыл бұрын

@@WildRoseBuilds Haha sounds good, I am thinking of setting one up on mine but have to design it first. Your videos are awesome btw!

@user-iq3sx3ck8u 10 ай бұрын

amazing

@WildRoseBuilds 10 ай бұрын

Thanks

@TheJCEguy Жыл бұрын

Love the video as always 🍻 Are you slightly moving the camera after a few layers to make that rotating affect? What camera and editing software do you use?

@WildRoseBuilds Жыл бұрын

I’m using the worlds worst camera slider! I edit in premiere and I use a gh4

@Silvershot6986 Жыл бұрын

Just got my ender 3 s1 plus. Havent put it together yet. Trying to figure out what is the smallest table size I can get away with to keep it some what in the corner and not put it in danger lol any Idea what that would be?

@WildRoseBuilds Жыл бұрын

People swear by the ikea lack tables, they’re a little low to the ground but you can buy a few and make an enclosure. If it’s a top mounted spool you’re probably good with any table bigger than 2x2 feet!

@Silvershot6986 Жыл бұрын

@@WildRoseBuilds thank you

@Hanzi2u Жыл бұрын

The last one I'm wondering how did you print without support ?

@WildRoseBuilds Жыл бұрын

There was a slight fail where the charging cable slots in which I missed when slicing but the rest was support free!

@Hanzi2u Жыл бұрын

@@WildRoseBuilds looks neat

@diegolgo 5 ай бұрын

layer shifting examples xD

@richharris9036 2 ай бұрын

My only question is, how do you shoot this type of time lapse?

@michaelhobbs4764 Ай бұрын

Octoprint is a platform that allows you to connect to your printer via a raspberry pi. There are many advantages to this including adding a Raspberry Pi camera where you can watch and control your prints remotely through Octopod. You can schedule photos by time or layer change, and even have the print head move out of the image for each photo. You can also add AI to watch your prints and stop them in case of stringing, thermal runaways, and fails. Can be a bit daunting for beginner level, but lots of helpful content out there to push you along your path to remote access and time lapse vids. Aloha.

@s4tisfyed723 8 ай бұрын

Its sunday when im watching this...

@carbide1968 Жыл бұрын

can you tell me where to get the portal screen savers if that is what they are please.?

@WildRoseBuilds Жыл бұрын

They’re just movie files that you can loop and scroll through. I’m sure someone has an app for that tho. Thanks for watching as always!

@carbide1968 Жыл бұрын

@@WildRoseBuilds just want one of the ones you used, i have no clue what i'm doing cell phone wise. thanks.

@WildRoseBuilds Жыл бұрын

@@carbide1968 they’re linked on the thingiverse page for the model in the description

@carbide1968 Жыл бұрын

@@WildRoseBuilds got it and tyvm.

@Grimdal Жыл бұрын

can you do a time lapse tutorial please

@veracity91 Жыл бұрын

🤩

@cyberstar251 Жыл бұрын

wait, the mug was layer shifted by design?

@WildRoseBuilds Жыл бұрын

Yep! It’s supposed to emulate the frustrations of 3D printing. Pretty clever design!

@jbrou123 9 ай бұрын

When I saw the mug printing, I thought that's some serious layer shift. I guess the joke is on me!

@OArchivesX Жыл бұрын

You seem to have little to no stringing. Are you always using fresh filament or de-humidified beforehand? No retraction changes? Or is it the low speed/lower layer height (I'm assuming .1? Or is that actually .2)

@Yxnnik132 9 ай бұрын

CAN YOU POST A TUTORIAL FOR THE TIME LAPSE (sorrry for caps)

@andreymerka4227 7 ай бұрын

Забавно что подставка под телефон именно эта у меня стоит сейчас на столе. Причем напечатана была лет 7 назад

@ivanopolese7546 7 ай бұрын

add print time pls

@ScytheNoire Жыл бұрын

That joke 3D Printing mug is so perfect. I love it. Only 3D print hobbyists would get the joke.

@WildRoseBuilds Жыл бұрын

Yeah I was surprised that it printed so well. Emulating a fail like that is harder than you’d think. That’s one of my favorite designers at the moment. Thanks for watching!

@moosimus6492 9 ай бұрын

@@WildRoseBuildsmy printer had a layer shift on the exact layers so now the mug looks perfect!!

@makewithmegma Жыл бұрын

💕👍

@fabioeng_mecatron261 3 ай бұрын

2:42 à 2:50 KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK!!!!!!!!!

@sabretoothtiger6714 3 ай бұрын

soo much layer shift

@isthattrue1083 7 ай бұрын

Check your belts...

@iabaca 9 ай бұрын

I tried the mug and print failed. It ended up like a normal mug. Ffs

@miku-hole Жыл бұрын

新片上映！ 02:43是故意的吧🤣🤣🤣🤣

@WildRoseBuilds Жыл бұрын

Yes!!

@plushy8670 Жыл бұрын

@WildRoseBuilds Жыл бұрын

@Sysshad 2 ай бұрын

fantastic, more plastic in the world, that will end up on a landfill as soon as you move your house and start realizing you dont want to keep all garbage around