9 Minutes of Relaxing Evening Touge - RAW JCM Race Exhaust - 280BHP MINI Cooper S JCM (R53)

  Рет қаралды 14,913

batousan

batousan

3 жыл бұрын

Just some random footage of this thing running at 7/10ths on the local touge, couple of runs to max revs but not completely beating on it. Moved the mic placement to the rear light housing to pick up just the exhaust on this video. As you can hear from around 1:09 at WOT this thing gave of some 13B Rotary vibes, wasn't conciously going for this but it just turned out that way.
(Disclaimer I do not own the car, I am not the driver, speedo is in KPH).
Fully built engine, forged pistons, cams, head, valves, block etc. Increased compression ratio with 7,800rpm rev limit. 550CC Injectors and custom tune. Built and tuned by 1320MINI.
JCM Intake, 4-2-1 Manifold into full JCM race exhaust (decat).
GP Works Supercharger with 13% Reduced Pulley and intercooler
KW Clupsport Coilovers and competition spec anti rollbars
Solid gearbox/engine mounts and poly bushed suspension
Adjustable droplinks, control arms and full race geo with corner weighting.
GP1 Flat floor, GP1 Aluminum trailing arm conversion and R56/GP1 Calipers & Disks with Carbotech XP10 pads, Traction control and ABS disabled.
Partial interior removal and sparco evo bucket seats, OMP WRC wheel with quick released.
Weight: 1167kg with driver.
Power: 278 bhp @7325rpm / 213 ft/lbs torque @4470rpm
Hoping to do some Subaru videos of a similar style when things are bit more normal so please sub if your interested in seeing something like this, or let me know what you'd like in the comments. ✌🏻

Пікірлер: 40
@RetroDrivers
@RetroDrivers 3 жыл бұрын
That's A good Mini !
@honestreviewer3283
@honestreviewer3283 Жыл бұрын
Really nice, thanks for the vid. I have a 2005 R50 that I keep modifying and my wife doesn't understand why I don't just get a new car. Mine's not nearly as fast as this one, but it's plenty fast enough, and the suspension and brakes are completely dialed (R56 trailing arms, adjustable control arms, Bilstein B16 coilovers, 25mm sway bar, poly bushings, Vorschlag camber plates, Wilwood big brakes front and rear, Michelin Pilot Super Sports on Oz Alleggerita wheels, etc.). I hope to never have a "new" car. Until I can afford a 1969 Porsche 911, my MINI ticks most of the same boxes!
@batousan_
@batousan_ Жыл бұрын
Makes total sense, if I did it all again I'd spare the expense of the power mods put it all into suspension, weight reduction, brakes and cooling. I sold this and bought a 120hp 1.6 Eunos (mx5) with an lsd, slow car but fun car. Had it 8 years and still improving it bit by bit 👍🏻
@Chickendipupdate
@Chickendipupdate 3 жыл бұрын
Forester and mini good combo 💪 same here
@MattL1987
@MattL1987 3 жыл бұрын
Love reading the build thread of this weapon
@batousan_
@batousan_ 3 жыл бұрын
Thanks man, I would have liked to put some of this footage up back then but you can probably understand why I didn't 👀😂
@MattL1987
@MattL1987 3 жыл бұрын
@@batousan_ yep, I get you mate 🤣 the video of your car with the mic fixed to the passenger side capturing the whine with the launch at 1:50 was what made my mind up to buy one in December. I still watch that video and have done again this afternoon. What's interesting is you're using a 13% pulley and Haywood says anymore than 15% overspins the charger at redline, I've got a 17% waiting to be fitted...should I be worried if I want to take it on track at any point?
@batousan_
@batousan_ 3 жыл бұрын
​@@MattL1987 Cheers, thats very flattering mate, glad I inspired you. I was running close to 8K redline with the high compression engine build so my concern when it came to pulley choice was more to do with the amount of boost generated and the risk of detonation. I didn't want the faff of a front mount intercooler setup (the options back then were not as good and unreliable/poor build quality) so heat was my concern, before the build I cracked the head running a 17% due to det/high temps. I wasn't worried about the blower as back then even a delivery mile one wasn't that expensive (think I got one for £200-300) which was much cheaper than a new head/pistons/rebuild 😂. 17% is great for a road car as torque is up at lower rpm due to higher boost, the IAT on GP intercooler meant it would get hot quickly if you rev'd it out on track. If I went back I'd do 11-13% pulley max and put my money into wheels, tyres, suspension, brakes and setup but do more track days and get seat time, worry about more power later.
@Bigal1211
@Bigal1211 3 жыл бұрын
That’s sound the nuts
@giuseppeprestileo5062
@giuseppeprestileo5062 3 жыл бұрын
Top! 🔝
@cyber2square934
@cyber2square934 3 жыл бұрын
I'm in the middle of a Mini build I can't wait :)
@alrose3906
@alrose3906 3 жыл бұрын
Same bro good luck
@cyber2square934
@cyber2square934 3 жыл бұрын
​@@alrose3906 Thank you, I wish you good luck as well, what are you planing to do? :)
@Secondrunnerup613
@Secondrunnerup613 7 ай бұрын
Great mini!!! What guages do you have in the vents???
@ayosemorales873
@ayosemorales873 3 жыл бұрын
Que lleva montado??
@jankohler2134
@jankohler2134 3 жыл бұрын
I miss the Charger Whine...
@rambolavendetta3511
@rambolavendetta3511 3 жыл бұрын
hello Bato what components do you mount as preparation? Are pistons and connecting rods original or have you all forged?
@batousan_
@batousan_ 3 жыл бұрын
Block machine work bore and hone Block reface Mahle Motorsport Big End Bearings & BMW Main bearings Wössner Pistons (forged) with stock rods with ARP rod bolts Ported Head with ARP head bolts G&S Enlarged Intake and exhaust valves with Ti-Retainers & Valve Springs New BMW Oil pump
@Jabana_
@Jabana_ 3 жыл бұрын
Hi, what wipers are those? I've been trying to find some mini aero ones for rhd but have been unable too
@ryanavfc1
@ryanavfc1 3 жыл бұрын
I have the Bosch aero ones from ebay for my R53. These look like they are teh same, i think you can buy them diret from bmw too.
@aroncastrejon4136
@aroncastrejon4136 3 жыл бұрын
I wonder if this is what happens if I push the sports mode button my base R56
@batousan_
@batousan_ 3 жыл бұрын
Yes but when you do it also empties out about £15,000 from your bank account and your fuel consumption gets worse 😂
@Toasty3243
@Toasty3243 3 жыл бұрын
How much did it cost to build the engine and has it made it more reliable? i’m lookin to mod my 2006 mini cooper s but she got 130k and don’t want put too much $$ and then the engine gives out ya know?
@batousan_
@batousan_ 3 жыл бұрын
4000 gbp / 5500 usd plus a few bits here and there.
@nikap211
@nikap211 2 жыл бұрын
hello what brakew are you using? what do you think should i do a r56 swap or should i put 4pot brakes on it?
@batousan_
@batousan_ 2 жыл бұрын
The oem r56 brembos are shit, so avoid those, I just used R56 calipers, carbotech pads, srf fluid and braided lines. There are other option but the wheel fitment choice and sizing affected my brake options but I can't say I had an issue with them. Car was 1067kg or 1167kg from memory but light which helps.
@benbirch2393
@benbirch2393 7 ай бұрын
Would be doing well to go 1060kg, mine is that and it's completely stripped, frp bonnet and tailgate, perspex rear screen and 1/4 windows blah blah blah (although does have a full cage)
@r53sam
@r53sam 3 жыл бұрын
I recognise this road is out Hitchin way?
@batousan_
@batousan_ 3 жыл бұрын
If you mean Hitchin way, in Mexico then you'd be right. 👀
@r53sam
@r53sam 3 жыл бұрын
@@batousan_ the only Hitchin I know is in Mexico. Thought I recognised it.
@01SaharaEdition
@01SaharaEdition 3 жыл бұрын
Is that an upper glove box?
@batousan_
@batousan_ 2 жыл бұрын
Nope, passenger airbag
@lunlun2930
@lunlun2930 3 жыл бұрын
hi bro. what are ur wheels size detail? do u have any rubbing?
@batousan_
@batousan_ 3 жыл бұрын
16x8.0J on 215/45 ad08. Everything rubbed, even though metal was removed from inner arch and the plastic arches were filed down a bit. It would hit under compression and pop the plastic off occassionally too. Ground clearance was bad, lower lip would scrape, lower brace would create sparks on a b-road and the jacking points were all removed/fell off.
@lunlun2930
@lunlun2930 3 жыл бұрын
@@batousan_ then how u drive ur car?
@batousan_
@batousan_ 3 жыл бұрын
@@lunlun2930 fit an exhaust louder than the rest of the noise 😂
@MrSuperMarian22
@MrSuperMarian22 Жыл бұрын
@@batousan_ what ET of rims ?
@asterisprosalentis2310
@asterisprosalentis2310 3 жыл бұрын
280bhp with 13% pulley?? Hows that possible??
@batousan_
@batousan_ 3 жыл бұрын
The answer is in the description 👀
IT'S GOOD TO BE BACK ON TRACK!! | Mini Cooper R53
21:59
Cars and Bras
Рет қаралды 29 М.
Best Motoring Mini Cooper race | evo TRACK BATTLE
10:20
아이스크림으로 체감되는 요즘 물가
00:16
진영민yeongmin
Рет қаралды 28 МЛН
Khó thế mà cũng làm được || How did the police do that? #shorts
01:00
Жайдарман | Туған күн 2024 | Алматы
2:22:55
Jaidarman OFFICIAL / JCI
Рет қаралды 1,7 МЛН
This Short Shifter Changes Everything!
14:15
HNP Racing
Рет қаралды 21 М.
Modified Mini R53 Adventures: Having Fun on the Road!
17:37
Damo drives
Рет қаралды 10 М.
280BHP Mini F JCW John Cooper Works! @GuswKing
17:56
Adam Ivell
Рет қаралды 96 М.
270 BHP R53 Mini Cooper S takes to Goodwood Circuit - 17/09/2016
10:02
MINI Cooper S JCW || CRAZY DRIVE || Reventino 2015
3:36
TNT Video
Рет қаралды 404 М.
What it's really like driving my MINI R53 as a daily driver
12:58
Mods & Meets with Molly
Рет қаралды 9 М.
Всегда проверяйте зеркала
0:21
Up Your Brains
Рет қаралды 346 М.
обзор на Audi RS2🔥 #ауди #audirs2
0:30
SEVEN FORCE
Рет қаралды 1,2 МЛН
Детейлинг студия и Автомойка Батя Моет,Уфа!
0:18
Батя Моет , Автомойка и Детейлинг студия
Рет қаралды 1 МЛН
😱 Велосипед-лимузин?!
0:20
Тот самый Денчик
Рет қаралды 986 М.