NICE JOB WITH THE TOADS....I ALWAYS STOP FOR TURTLES AND HELP THEM ACROSS THE ROADS HERE IN PA
@billsiliskie25183 жыл бұрын
I write the date and hours on the filters with a sharpie. It serves as a visual reminder for me for the maintenance schedule. Also have a notebook for each tractor.
@markbuetow23513 жыл бұрын
I'm glad to see that I am not the only one that can find a way to make a mess changing oil. It happens.
@dougdickey73813 жыл бұрын
Just a suggestion, we have a lot of equipment on our farm and when I change the oil or fluids I write the date and hours on the end of the filters with a sharpie marker. That way I can just look at it and know when it was changed last. I also seen where someone else already mentioned it, but I've also used the shop vac method when changing hydraulic filters to keep them from dripping so much and loosing all that fluid.
@No_bread-and-circuses7 ай бұрын
Transmission filter is tightened one turn with a wrench after it makes contact with the mounting surface. Hydraulic filter is tightened by hand, then an additional 1/2 turn.
@bobpurs3 жыл бұрын
Glad to hear I’m not the only oil spiller.
@briandufty50813 жыл бұрын
A man has to make his mark.. My step dad ask. Itol 9pm I'm not saying any more.. Hi Hunter. Happy birthday. Who got best shot. Xxoo
@lloydpainter17013 жыл бұрын
I tend to drop the oil filter into the oil bucket. Makes for a great splash! Not one of my favorite jobs. Enjoyed you video and glad to see you are human.
@jamesoncross74943 жыл бұрын
It's good to see guys like Mike that take care of equipment, even though it isn't theirs, and care about little critters too. I'm that way too.
@mikejuhas39933 жыл бұрын
Hi Mike, hey I have been watching your channel for a few months now and appreciate all things going on at the household. As a former High Horsepower Tractor Specialist with Case IH (which by the way I am not too far from you in Erie, PA), the number one item that gets missed and not written up in all the maintenance schedules is...changing front axle oil. Yes, you can get by without changing it but that oil is unfiltered, so if there is any shavings from the mfg line or casting sand that finally comes loose from churning, it can go right for your axle seals. Changed that oil at 50 on my MX5100 and BX2360. Also appreciate seeing Hunter in your videos too! My brother is autistic as well however he is not mute but does live in an assisted living home near Clarion, PA. Kudos to the videos you and your family are generating!
@jackfairweather1993 жыл бұрын
I changed the oil in my mower the other day and didn't spill a drop. A new personal record! At least you didn't drop the drain bolt from the oil pan into the drain container!
@OutdoorsWithTheMorgans3 жыл бұрын
Lol
@frankfoust10373 жыл бұрын
Hey mike I know what you mean. I changed my water pump on my pickup. So it went on without a hitch. Put antifreeze in it then I started it up it run for about five or six minutes so get warm I noticed it was spraining any freeze. Turn off the motor call the pump back off. The gaskets had somehow twisted. So now it’s midnight and I have to wait till tomorrow to get me some new gasket. So I know what you’re talking about Mike you do one thing everything goes smooth and then something happens. I was going to ask you I noticed that whenever you before you close the hood on your tractor there is a place for a air filter I didn’t know if you change it or not. So keep up the good work.
@rphiliprogers3 жыл бұрын
Good morning all. Back to the Stihl store today. Fall is here forecast is for lows in the 30s by the end of the week. I wonder how may people will start cutting firewood to start burning this year. Stay safe, be kind and Have a day!
@davesoutdoorsnmore90493 жыл бұрын
Hello Phil, as I'm in. Southern Michigan and have already been collecting and cutting wood now for about a good month and probably still don't have enough as we burn about 15 cord's
@WindowGeek13 жыл бұрын
Mike, this was so cool today. It’s like wrenching on the tractor with your friend along for the ride. Great camera angles and simple, straightforward explanations. Nice work. I learn so much about operating techniques watching your videos. Today I learned a few things about how to lay out the maintenance too. Great stuff! Thanks.
@tophat71993 жыл бұрын
I spill too and I do it every day for a living so your good
@frankfoust10373 жыл бұрын
Hey Mike it’s me again but one thing is good half block away is it Auto Zone. Take care and God bless
@chrispileski66403 жыл бұрын
Glad to see I'm not the only one that saves toads, frogs, snakes, praying mantises, etc. 😁
@InTheShopWithDoc3 жыл бұрын
Mike I too can relate wit the spilling of oil lol. When I change the hydraulic oil filters even though I don't spill much the level does go down when the new filters get filled after running. I would suspect you should check your level again after running. Glad to see you are getting back into the groove and you are seeing progress on the new building. Man wish I could build a building half that size lol Take care and stay safe
@petessite3 жыл бұрын
dont forget to write the engine hrs & the date oil was changed on the end of the filter Mike , then you have visual of when it was changed , in permanant marker !!!!! How you all doing , regards from the UK.......
@michaelmijatovich89833 жыл бұрын
Mike about spilling the oil same here it never fails lol like you said the filter wrench is well oiled and it won't Rust lol Have a great Day
@thalleshoward39623 жыл бұрын
Oil filter wrench in the dirty oil, done in a million times.
@jimmcghee47423 жыл бұрын
I place the suction hose of a small shop vac on the hydraulic fill hole when changing hydraulic filters ony Kioti CK3510. They gave me an incorrect filter for one of them. Oil everywhere the first time. I didn't loose a drop with the vacuum. Enjoy watching. We're from Southern Illinois.
@larrymoss18963 жыл бұрын
Sure like the way Mike maintains his equipment! Pie Town Larry
@crazyhass843 жыл бұрын
Well its actually not his equipment...dont forget he gets this stuff for free! He has to do the maintenance or kubkta will be really upset lol
@EADeets3 жыл бұрын
Love the fact that you kept the toads safe. Reminds me of me. You have my respect!
@Timberwolf5933 жыл бұрын
Good morning Morgan’s I know what your talking about,it never fails the wind blows and oil goes all over the place, Have a Day 👍👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸
@badcat47073 жыл бұрын
Good evening Hunter ;-)
@evilbrat53763 жыл бұрын
Bucket, funnel, drip pan - whatever! Never fails. . . oil spill. Worse than Exxon! Happy to see there are a bunch of us out there - should start a club for this. . . name that club! Have a good day y'all.....
@tangoseal12 жыл бұрын
Cool video man. Job well done!
@tomfillmore97103 жыл бұрын
Good video thanks for sharing
@andylamm55712 жыл бұрын
Hello Mr. Mike. I have a Kubota MX5400 like yours, except no cab. It's time for me to do my 50 hour Maintenance. Thank you for showing me how. I really appreciate it. And enjoy learning from you.
@olddawgdreaming57153 жыл бұрын
Thanks for sharing with Mike. I feel your pain with the mess while changing oil. Got out from under the vehicle with no mess, moved the drain pan with no spills, walked around the vehicle and stepped into the drain pan wearing my brand new tennis shoes! Like they say _ _ it happens when you least expect it. Thanks for sharing with us and taking us along. 👍👍👏🏻👏🏻👏🏻👏🏻
@BigBadRoaddog3 жыл бұрын
Gotta admit you sure make moving, grading and shaping dirt look easy.
@johnsadler86373 жыл бұрын
Good morning from MidMo again. Back from farm last night. Managed to knock all the tall (really tall- seeded out and some 4’) grass down mostly flat on the 2-3 acres loosely termed “the yard”. It’s inside the fence so cattle don’t do it for us. I won’t be back for about 5 weeks, so I set up for my deer camp trip - lit the pilot light on the heater etc. Set up trail cameras where we want to census deer crossing between the two halves of our farm. No matter what, oil will spill. Somehow, some way. And then the filter oil will get on frame or axle or something. At least your wrench won’t get rusty! I usually fumble the plug into the catch pan myself. I agree - that topsoil looked better after getting stirred up some. Those clumps might break up when you rake it. You’re going to appreciate that extra flat ground to work in.
@matthewsims3593 жыл бұрын
Im with ya on spilling oil. I changed the oil in the ranger today and made a mess before i even started. I grabbed my drain pain and hadn’t completely emptied it and slung oil every where. Took the filter off the ranger and dropped it, another mess. A 15 min job turned in to 45 mins to get the messes cleaned up. The Kabota looks good all cleaned up. My RK55 is coming home this weeken and getting serviced and a bath. Stay well, stay safe and yall HAVE A DAY
@lewissmith36163 жыл бұрын
I totally understand the part about spilling oil or dropping the wrench in the oil. I Fit in that same category. So I’m not alone in this field.. Thanks for the encouragement. Looking forward to seeing grass on that hill Someday hopefully before snow flies.
@HallnoutMhall3 жыл бұрын
Morning Morgan's! Seems i always make my oil mess when removing the drain pan cap. Hopeful to receive some rain today. Still bone dry. Soybeans @ 4% moisture. Hope all are well & have a day.
@franklackie24692 жыл бұрын
Nice tractor mike glad to see you appreciate n maintaining your equipment
@edwardfinkbeiner51553 жыл бұрын
Make sure you clean that Engine too. Next Oil change use Rotella T6 5w40 it makes a Big difference. 👍
@deanbarr57403 жыл бұрын
I noticed you do exactly the same way I do, before you put on the new filters you finger paint the rubber gasket with new oil. I did my 50 hour maintenance back in March. That is a nice tractor Mike. Looked brand new again after washing it up.
@sunseeker50713 жыл бұрын
Great video........was not sure I could do the oil change on my BX, but now feel more confident. Thank you Mike
@cayutacreekoutdoors4853 жыл бұрын
I'm just getting ready next week to do my 50 hour service on my MX 5400. Thanks for showing.
@cayutacreekoutdoors4853 жыл бұрын
Was wondering if you swapped out the filter magnet on the suction side from the old filter to the new one? I forgot to and had to spin my new filter off and reinstall with the magnet. I couldn't tell from your video if you did this or not. Just wanted to let anyone know that has a MX5400HST so they don't mess up like I did.
@ronalddean48343 жыл бұрын
If I would have dropped that oil filter wrench 2 counties away it would have found that drain pan. But I like working on as well as with my tractor. I like taking care of it. Little things go a long way. Thanks Mike for sharing
@robinthomas24033 жыл бұрын
Your not alone Mike, I get it all over me also! Lol
@TheHobbyFarmHomestead3 жыл бұрын
That’s a good looking tractor! Lol! Go team Kubota! Definitely, winter is coming. Keep up the good work Mike.
@davidhosmer14243 жыл бұрын
Fire wood bucket to sift roots from soil/dirt. At different times: dropped a gallon glass jug (remember lemon blend) of oil, filled transfer can from a 55 gal drum on it's side - I can go away and come back in time to shut the valve, NO!!. I spilled more oil and wasted more money than I ever saved by buying a 55 gal drum. I hate changing oil. The cars are too low to even get a pan under them. Thanks and take care.
@russellbowman80513 жыл бұрын
The slope is taking a little more shape little more time grass will be growing !!👍👊
@allenhenry11133 жыл бұрын
Great job on the maintenance your doing on your tractor. Way to go on saving the frogs!!
@tomeckermann63433 жыл бұрын
I feel ya there, Oily Mike. I’m more of a wearer than a spiller. I helped a buddy change the oil in his 47 Olds rat rod a few weeks ago, and I had it all the way up to my armpits.
@tommybounds32203 жыл бұрын
Awesome video great scenery thank you Knoxville Tennessee.
@humbleheart71963 жыл бұрын
Mike - get yourself some automotive grade rubber gloves for these messy jobs. They clean up easy and can be used multiple times. As a helpful hint, buy yourself a 5 gallon pail of oil versus the quarts. Cost effective option and environmentally friendly over the quart containers. Might think about a power wash under the hood/engine compartment, as that dust will turn to rock over time, if left to accumulate. BTW, the orange dirt didn't come off! Love the videos and look forward to the build.
@andylamm55712 жыл бұрын
Thank You for showing me how to change the Oil and Filter's on my Tractor. I have the exact same one. Thank You.
@samanthakilpatrick80033 жыл бұрын
Hi mike, you and Melissa, have made your property so nice 👍 you both work very hard and have put a lot of effort into it , it looks lovely. 😄👌🤗
@bryanblood70633 жыл бұрын
I tell ya what your the type of guy I'd buy a used piece of equipment from I've never seen anyone clean there tractor as much as you. I do the same as well I have a restored 1972 massey Ferguson that gets cleaned and never sits outside after use I have a polebarn though I also store my 78 3550 ford backhoe in my polebarn. I miss the mini excavator though if that was yours that would be a useful thing to get firewood in your 3 touch process. I cannot wait for the building to be built and to see how your gonna finish it.
@marcuswhite36283 жыл бұрын
Glad to see you back in the saddle again❣️Marcus from Chesapeake VA.
@1944chevytruck3 жыл бұрын
oh well the oil wrench won't squeak!.... take care of your stuff good man!... thanks 4 video. be kind.
@puropadre3 жыл бұрын
Quick tip - don’t forget to properly torque/tighten the two oil drain bolts. A few years back, I had my Kabota serviced on-site by a local dealership. The mechanic hand-tightened the drain bolts but forgot to follow up with a wrench. A few weeks later, while using a Woods Chipper attached to the Kabota running at about 540 rpm, one of the drain plugs backed all the way out. The other bolt was about halfway out. Unfortunately, I didn’t notice this until my wife walked up and asked, “Is that supposed to be happening?” I looked to see oil all over the ground and immediately stopped the engine. It was too late, however; the engine was toast. The best I could do was negotiate a split cost with the dealer for a new engine. So....word to the wise - tighten the drain bolts.
@davidmorse84323 жыл бұрын
That's a good reason to change your own oil.
@normanreed5722 жыл бұрын
Had a very respectable garage leave the plug loose on my pick-up and noticed oil dripping as soon as I got home. Called them and they were very apologetic. Don’t know if they would have taken responsibility if something happened but I started checking the plug after that.
@fratamico553 жыл бұрын
When selling Kubota tractors, I always told my customers “fluids and filters, fluids and filters!” It prevents so many issues along the way.
@MikeSparkman3 жыл бұрын
Hey Mike Morgan You may know this but with running your tractor in those dirty conditions your radiator, condenser and air cooler(if equipped) will get full of dirt. Water doesnt get them clean. You have to use compressed air. Blow them out opposite the normal direction of air flow first, then from the normal direction and back and forth. Be careful not to get too close and you wont bend any fins. Your shop is looking good. Looking forward to seeing the finished product.
@jeffhartmann24693 жыл бұрын
We got rain last night!! We needed it here in Southern Indiana. I just aerified my yard and spread grass seed…..Good timing!
@BG-vq9fd3 жыл бұрын
I'm also a spiller. The first time I changed oil in my brand new building, I was all done under the truck with no mess. I caught the drain pan on something when I was picking it up and dumped all 6 quarts of dirty oil on my brand new floor.
@rcp935peek43 жыл бұрын
I'm a spiller too. It was good to see that one of the products that you use was advertised on your channel ( the Lectric Bike step thru). Thanks for the great videos
@kaybee90003 жыл бұрын
Ha!!! I changed the oil in my MX5100 into a 5 gallon bucket. Then into the same bucket I drained the oil from my John Deere 870. Refilled, greased and proceeded to back over the bucket. Thankfully I had a pile of crushed concrete close by and a front end loader on the 870. Than did a remarkably good job of soaking up the spill.
@richglass67683 жыл бұрын
Thanks for finally doing a maintenance on one of the machines. I don't think you have ever done one on video before. If you did it was way back before the "tractors we don't mention any more"
@joellemire36303 жыл бұрын
In Canada 19 mm is the same as 3/4". LOL Keep up with the great videos. Love the channel.
@davidmorse84323 жыл бұрын
And 13 mm is the same as 1/2, and 16 mm is the same as 5/8, and 24 mm is the same as 15/16.
@gregritter58833 жыл бұрын
Hey Mike little hand while you have the oil plugs out and you drain the oil out of the tractor and you changed the one filter you should change all the filters and then put the oil back in the tractor
@OutdoorsWithTheMorgans3 жыл бұрын
That was motor oil then hydraulic was the other filters
@gregritter58833 жыл бұрын
Outdoors With The Morgans Did you go back and check the yeah you did never mind
@dickhansen85943 жыл бұрын
Good video fella. Thank you for sharing with us.
@mikejuhas39933 жыл бұрын
Oh, one other thing, if you are looking for any bolt on wheel weights for the MX, you can use 140lb Farmall Super A rear wheel weights. They are a direct bolt up with some all thread. Found someone in Erie who restores old Farmalls and was sell the weights off. Farmall cub is not the same rim diameter. I have 2 on each side of mine and was a little cheaper than other vendors. My profile picture shows only one installed and decided why not load up the rear end with weight. If you are at all curious, I also married a Bobcat 709 skid steer backhoe to my MX5100 complete with subframe and fabricated a homemade cab for snowblowing during Lake Effect snows.
@daved70243 жыл бұрын
Thanks for saving the Toads😊👍 It is a real good idea to use all KUBOTA Lubricant's there is a big difference in quality and additives they use. Although the grease is no biggy; but the Super UDT2 hydro fluid and engine oil is🚜👍😊
@jasonbossaer25803 жыл бұрын
I’ve accidentally dropped the oil filter in the waste oil pan several times. That’ll make a splash. Good tutorial! Blessings, Jason from Indiana.
@kylerayk3 жыл бұрын
That tractor needs a play date with the power washer! Also, I noticed a drip on a plug or fastener rear of the engine underneath. I heard that a trick for changing they hydrostat filters is to hook a shop vac up to the filler port, turn it on, then remove and replace the filters. The air rushing in through the filter housing will prevent loss of oil. I tried it on the headstock of a metal lathe and it worked great!
@JSomerled3 жыл бұрын
I never did like the filter locations.I know it’s a minor thing to get oil dripping on parts and can be sprayed off,but with a little thought to design they could avoid that..I’d be tempted to buy a kit to mount the oil filter in another location to keep parts clean .We do it all the time in custom car builds
@kirbydison39593 жыл бұрын
Spiller...yep, it ends up somewhere it's not supposed to be everytime. Love your vidjeos. Bossier City, LA
@tommyordoyne74613 жыл бұрын
Nice toad save. Have a productive day.
@thebradleysoncatbirdhill68493 жыл бұрын
Mike! I love the way you take care of your equipment. 👍 I learned a tip years ago about changing oil. I have a handful of blue pads that are often sold for house training puppies. They have an absorbent side and a waterproof barrier on the bottom. Great to spread out under any machine that you are changing fluids on! Learnef the hard way, lol, just like you! 😱
@billfenner70843 жыл бұрын
I really like the disclaimer that the two toads are going to be okay . I didn't think that you were going to smash them with the loader bucket.
@rohoroyarrington32243 жыл бұрын
I feel your oil spilling pain Mike. Somedays I think I should just empty the oil on the ground and save a step lol. Have a day.
@rtlake3 жыл бұрын
Good morning yes I can believe you can drop your wrench you are not the only one. I usually drop the drain plug in the oil pan.
@crystalclarity67663 жыл бұрын
Loved the music before the toad incident! 😁
@dishpointer3 жыл бұрын
A little trick to keep from loosing any hydraulic fluid is to put your shop vac on the filler hole while you change out the filter. I restrict mind down a little and when you remove the filter it draws air keeping the fluid from spilling out.
@davidmcgennity31823 жыл бұрын
I can do a perfect oil change not a drop spilt ,step back to admire my work and put my foot in the oil pan !
@WAVETUBE843 жыл бұрын
Maybe chop the bottom off of a 55 gallon steel drum (or plastic). They are 23 inches in diameter. Maybe build or purchase a circular wheeled frame for the "drum drain pan" and attach a T-bar to maneuver it around? ....and a drain plug or valve in that drain pan to empty it without having to lift or tip it over, etc. However you do it, empty the old oil into a container for recycling... Otherwise time passes, we forget about it...and it rains. The water is heavier and goes to the bottom. Then the oil is the first thing to overflow... and defeat the purpose of the entire effort (reducing a mess). Oil pollution? Didn't they discover oil in the ground of...Quaker State? Haha
@johnhaug55273 жыл бұрын
Mike, I think we all have experienced the changing oil mishaps.
@stephenvenerable50783 жыл бұрын
Cleans up nice, the tractor that is!
@streetrodder28463 жыл бұрын
Mornin' Mike. Hopefully ArmorAll has changed it's formula since the late 60's. I used to use it and found that, after a while, it would crack vinyl, rubber, and the like surfaces if you went very long without reapplying. I've had several classics and streetrods since then and use mostly Meguiar's products. Been watching Outdoors With The Morgans since you started and love every episode. ~ Jim, Olympia, WA
@haus05 Жыл бұрын
should have put a shop vac over the fill port for your trans fluid , it creates a lock kinda like a venturi effect and you dont lose as much fluid
@nigelgrant96933 жыл бұрын
mike the next time you are changing oil do the filter before you put the drain plug back before you how engine are designed to flow underpressure to get all the oil out you did well what i with under carriage after washing i mix wd 40 diesel abit of transmission fuel and sprayed all under neat it all the vehicle can be done to protect the it saves it because its salt air over here its rust galore
@wayneblake18863 жыл бұрын
They have bolts with drain valve on it. Makes things easier.
@crazyhass843 жыл бұрын
Not worth the risk of them getting ripped off or leaking. Its a stupid just take it out and drain the oil. Its once a yr at most.
@waynereiver39173 жыл бұрын
Thanks mike
@robertsnyder51933 жыл бұрын
I'm a spiller too, first one at 8 years old the filter slipped out of my grip and landed on my chest dumping entire content and I've lubricated many tools like you did.
@richardberkimer67273 жыл бұрын
Yep, I'm a spiller too. Mike, one thing that I like to do on my MX is to write the date and hours on the outside of the filters with a black indelible pen. I find the date particularly important because I don't usually put enough hours on in the timeframe for the changes that the manual recommends. Makes checking them a snap. Did you have any issues greasing the front axle gear case supports? (to the inside of tires on top of the knuckle)? They always seem to give me issues.
@passionfruitestate96913 жыл бұрын
I use disposable absorbent pads (~ 4ft by 4 ft) to do my tractor work as I'm unintentionally messy at times. They come in a pack of 6-12.
@bernardbrock1803 жыл бұрын
excellent how to video. I still spill oil. It is natural thing to do.
@jacobdemoss42273 жыл бұрын
This will be better in the shop I am also a oil spiller
@lonniechartrand3 жыл бұрын
When I change my hydraulic filters I will use my shop vac with the hose end stuck into the oil fill hole. Turn vac on and remove filter. Only oil lost is what is in the filter and no oil in shop vac!
@Comp6703 жыл бұрын
I had to change 20 gal of hyd fluid in my Ironworker today and got a lot on the floor. Im just like Mike, usually spill some EVERY time I change oil.... Its just the way it is.
@keithbeynon38783 жыл бұрын
Total agreement, daylight in the evenings is creaping away. I am not ready for the 5pm total darkness yet.
@billmorris26133 жыл бұрын
When changing oil I usually spill some too and my catch pan is 24 X 36 inches. When I see frogs and snakes, except for Cottonmouths at my camp, I get them to a safe spot before I continue working. Are we going to see some video of Hanna’s birthday party? If not we would like to wish her a VERY HAPPY BIRTHDAY!!!
@denniskaiser49033 жыл бұрын
Hi Mike you are about as good as me we must be cut from the same oily rag I always have the same trouble so don’t feel bad
@chris3m983 жыл бұрын
I would have written the date on the new filters? Also, I would put a sealer on the concrete in the new building.
@RDavies1267463 жыл бұрын
I also save the toads and snakes and praying Mantis and whatever else is found while moving dirt cutting firewood mowing lawns or pretty much anything outside! 😀