The 8-bit Guy might've taken a tech support call for that very AST computer back in the day.

"You win 1 internet." Wow, haven't heard that in a long time.. Which means i haven't earned an internet in a long time. So, Thanks Mike!

"Even I have bad sectors!" Can't tell whether to cry or laugh.

29:47 "Oh, no!!" exclaimed I, seeing the carnage slowly unfold That riser might not be as unobtanium as you think; AST was a popular brand, so you might find junkers elsewhere with an intact riser board.

I watch for the nostalgia and stay for Mike's biceps. 💪🏻

The riser PCB was in the way of the HDD screws. They couldn't be bothered removing so they ripped the PCB to get to the screws.

The riser may still work for the ISA slots, as there should be no traces for those in the broken area. I would try to remove the ESS chip and supporting components, so their remains do not cause any conflicts, and install an ISA sound card as a replacement.

I love watching you use techniques and chemicals to clean and repair components! Here in San Diego we've just had a couple of monster "atmospheric river" events in Jan/Feb 2024 and the first one flooded my video production studio in a music recording studio complex with waist high water. In my space I had about 60 hard drives in open plastic boxes on the floor that were underwater for about 24 hours (dirty nasty water too). It was a kick in the gut thinking about all the old video and files that were lost! Using the techniques I saw you use, e.g. deoxIT, rubbing alcohol, paper towels and a toothbrush I cleaned the circuit boards attached to the hard drives, and removed the porous (and wet) foam pad that is usually between the circuit board and the hard drive. Of the 56 hard drives, I only lost 6 of them. Woo hoo! I'm still confused as to why the water did not go into the air hole that every hard drive has (except for helium filled enterprise drives I don't have). I took off the cover of one of the failed drives and did not see any moisture inside. Oh well, I'm not complaining! Thanks Mike!

I haven’t looked back threw the comments to see if anyone else has asked/said this, but I’d love to see a video more about YOU Mike… Where did your passion for vintage/retro IT systems stem from, what do you do outside this hobby, where did you get the training (that you clearly have), is this “work that follows you home” (or by day are you really a masked super hero), what do you do with all the systems you restore - do you have them displayed (or like most of us, are they stuffed in the spare room/attic). Either way, love the videos Mike, keep em coming :)

The way the previous owner savaged that beautiful riser made he want to cry! Such crualty!

I just like hearing this guy talk tbh

Mike, when pulling C clips place a strong magnet nearby. That's where you will find the runaway C clip! 😂

Mike, your tech excitement is just how I wanted to start my day! After a crappy day yesterday, perhaps this latest video will help turn today around. 🙂

Never EVER stop doin these style and type of videos! Its like breath of fresh air!

It’s awesome to watch how you have progressed as you make your videos. You seemed so shy and stiff when you first started. Now there is more personality in how you host and talk about these computers

I think my original comment got lost in the depths of YT, but I think I found that riser card on eBay. It's listed as an ECS 16-bit ISA expansion board for AST. I can't tell for sure, but it has the ESS audio on it and looks very similar.

Mike, you should create a t-shirt where you write « Flux is your friend » ^^ I'd buy this one for sure ^^

Thanks for sharing more retro gold with us, Mike. Keep up the good work

The first computer I bought in 1996 was an AST, Pentium 133. Glad to see at least one of the brand is still out there.

As far as i have seen, the BIOS antivirus is just BIOS sending warnings if a program is trying to write on the boot sector.

Miketech ! back in the house !.. thanks buddy.. love your videos

Another week, another MikeTech upload. Good way to start my day.

I'm 37 seconds in and I am already lol'ing :D love it

I recently started working at the post office a few months ago, so I haven't had time to keep up with the channel as much... but today is my day off and I just woke up from a nap so it's time to binge watch. 😎

Ahhhhh another feet up Saturday and all my Christmas came at once with a new video from Mike Thanks for saving me

Ooh it's always exciting watching you repair theses systems!

Thank you for the fun video.

Great personal throwback for me this saturday afternoon. That first case is the exact same one we had at home for our family 286 system.

Enjoyable videos Mike - interesting seeing the different ways these early computers where made. keep it up !

I’ve been enjoying your videos for several months now. Please don’t stop making these!

it's the testing that i love... going back to a random time and into someone's life for a moment... amazing watching :D

Thank you Mike, you cheered me up today with a great video :)

Great video as per usual.

I just love these old PCs brings back so much memories

Yay glad to see your back to posting semi regular ♥

Yay Mike Tech!

The version of AOL on the disc is an early pre-Windows version which uses GEOS to display in a windowed mode. It’s clever and for many dos users may have been their first experience with a GUI.

30:45 wow, so glad to see such a beautiful sight this Thursday morning : )

Thanks for another interesting episode. Regards . Dzięki za kolejny , ciekawy odcinek . Pozdrawiam .😊🤗

it's hard to watch these videos. I am simultaneously in love with the PCs you find, and jealous that you find so many of them. 🤷‍♂

Oh yes, the wonderful 90's form factor of "Just what unspeakable things did they do to cram this PC in this case?". Still love a desktop PC case and I wish I could get a good modern one.

Your collection of AOL disks is impressive 😂

i love these videos :3

Awesome. I had the AST advantage 613e in an identical looking case. Cyrex 586. It had that very same cd drive. Slow deliberate and mechanical is an excellent description of the tray.. I remember they didn't send the pc with dos cd drivers and 16 year old me couldn't figure out how to get dos cd games working. They sent me a floppy disk with some drivers...

🥵 I wasn't ready for the gun show with vein in that thumbnail

AOL for DOS! I love it! I remeber using this version of AOL on my 8088.

Good job

Awesome stuff Mike 👍🏻 That Texas Instruments CPU needs framing on the wall. Never seen a CPU that had a Print like that. I’m going to have to get some of these systems and bust out my old How to Books from the 90’s. Cheers from the U.K 🍻

Retro bright rules, I restored a set of 2000s speakers and base with that, now they look brand new.

That poor riser. And 0 for 2 on FDDs is interesting indeed. Great video as always.

Nice 3 day pause to look for that c clip. The wonders of video editing. We didn't even notice. Very nice with the caviar hard drive. I would almost put that somewhere safe just for the rarity of it still being in good shape.

Nice now i can watch this as i eat breakfast

Oh wow, I didn't even know TI manufactured 486s! And I thought Cyrix was obscure.. I still love your videos and look forward to watching them every week (when your life allows).

I remember a lot of people buying those AST computers from Finger Hut. Heck, they were offering older PC's even in the late 90's via their catalog.

I wish I still had my first computer from 1989. It was a blast and I had it for a long time.

MikeTech gives classic computers the love they deserve. Good to see the can of deoxit! Not to mention AOL for DOS?!?!?!?!

I agree on the vertical floppy part, somehow charming

How about pulling the ESS chip on the riser and trimming the PCB edge to tidy it up slightly it might still work for ISA cards, thanks for another interesting video look forward to the next one.

It’s amazing that the interior of the case is actually painted…Ah BTW a public service announcment: when you want to remove old thermal paste on CPUs use a drop of White Spirit instead of IPA. It will dissolve the thing in 1 second withoud damaging anything. IPA does approximatly othing to that stuff.

20:10 AOL 1.6 so nice splash

That AOL 1.0 is the original AOL for DOS which was built on top of a stripped down GEOS environment.

2:04 It has certainly become a sinister name... Oh no, Count Varta was lurking in there and has sipped a lot of the copper in the vital board traces, the veins of our computers...

I can remember getting a Dell with a 486 and 256MB HD thinking that it would hold everything I would ever need. My brother advised me that he had heard about a drive with 1 GB. Man that takes me back.

20:12 HOLY CRAP VERSION 1.6!! Not gonna lie I spent YEARS on AOL 2.0 because my Macintosh was only 33Mhz w/ 8MB RAM so using anything higher was out of the question... but honestly I think it was their best version as it was still fairly lightweight and pretty fast.

27:19 Quiet, you! As others have said, the capacitors on the first board are 47pF. They connect from the data signals to ground to reduce the slew rate of the pulse edges, to help reduce interference that could be emitted from the keyboard cable. They can also help reduce interference received on the cable from going back into the keyboard controller (a little). 47nF would make the slew rate so slow the controller wouldn't receive anything, which would explain the keyboard controller complaining. Cheers.

Beautiful computers

That was crazy seeing that AST computer. Mine was a 4066 which had the same specs but I do believe the CPU was from Cyrix. Also the 5.25 floppy was not on my system nor was the Ethernet port. I was hoping the HD was intact to see AST Works. It was a shell on Windows 3.1 that shipped with mine just before Windows 95 came out.

Oh man I had one of those c&f computers, but it was a targa at the time. 286 with 287 fpu. The keylock could be turned with thin pliers.

In the UK, AST machines are super rare. It was the first PC and last branded desktop machine I owned and now I've got a working Advantage! 624 sat on my desk here fully upgraded with a Pentium 120, 64MB RAM, SCSI and a whole host of other upgrades. I love it but man it's full of quirks and gotcha's. I learned never to buy OEM ever again based on my experience with AST, Dell and Packard Bell machines that the rest of my family and friends owned and I went full custom build from that point on.

That poor AST is going to give me nightmares

Just started watching, and have to say that I have a desktop case almost like the one shown with the first system. It was my 486DX4/120 before I transplanted it into an AT midtower case. Doesn't have the lock LED, but everything else including the side vertical 3.5" bay. It has a "CCI Computers" badge, I think it was just the case brand, as that 486 was the latest evolution of my original 386, which was a Leading Tech pre-built. I still have the case even though it's empty now, I just don't want to get rid of it, LOL

Depending on how much of a deep dive that you want to do, it's entirely possible to reverse engineer and clone that riser board. If you just wanted the ISA slots, you may be able to get away with a generic riser. If you wanted the sound card as well, you could document and depopulate the PCB and sand it down layer by layer and scan it to recreate the connections. If the ESS chip is just hanging off the ISA bus, you wouldn't have to do that, you could just find a generic schematic and implement it on the board and make the relevant connections to the ISA bus. If you wanted to do an even deeper dive, the connector on the logic board is an EISA connector, meaning there are extra pins in the slot that aren't used by the current riser board. This likely means that there is a different riser board available for that motherboard that likely has VLB slots on it. It was a common thing to use EISA edge connectors on card risers for VLB/PCI, as EISA had enough pins to support both buses on the riser board.

Land rover, bentley and rolls royce used those Varta batteries on their seat memory ecus. Some got corroded beyond repair. Rover had one. The others used two. Didnt know they got used in PCs as well.

Varta the destroyer sounds like an old Nordic Viking name. 😂

Whomever owned system1 originally probably saved to and ran everything from the 3.5" FDD. That's what my mum did with her old 368 (that became mine). Still have most if not all of her original 5.25" and 3.5" floppies and diskettes as well - and the 80MB Caviar from it.

Greetings from Greece Mike, discovered your channel last year and since then I've been waiting for every week's video to show up! I've started lubricating my old fans instead of trying to find replacements and your RTC mods are way better than mine! I also have a question: How can I find the exact grease for floppies you use and is it more suitable than silicone grease for plastic and metallic parts?

He’s so cute lol.

Those funky chunky ram clips are designed to pop in and out, if you look closely, they clips are triangle shape, meaning the same resistance (theoretically) installing and removing.

these pcs are before my time

That last system had to endure some kind of rage I thought we only saw in modern gaming environments. Who da fuck manages to break a PCB so bad ?

ever considered getting a 3D printer for printing replacement parts? Love your content, thx for sharing this!

Ha! Now I know what those buttons look like. I have the very case from that C&F desktop but the Turbo and Reset button caps are missing. just some small square pegs down in the big round holes.

On the TI 486 setup, in theory what you could do, is just saw off the damaged end of the riser board, the ISA slots should in theory still work as the sound section of the riser will just be wired into the ISA bus. Then, just toss a sound card in it and call it a day.

good tip is to spray the molex connector in with deoxit.. After threatment it goes a lot easier.

Nice to see you back working on older systems. I'd lost interest when you were tearing down the homogeneous post-ISA boxes.

Curious what jessicat.jpg in the AOL folder was. Catpix archeology

Since you were lucky enough to find that C-clip, you should buy a lottery ticket!

Omg I used to have one of those AST Advantage Adventure machines! Although it was a 6066D model not the 466 model. Only had one 72pin RAM slot, but I did have a 133mhz Kingston Turbochip on it. Sucks about the riser on that machine. There's a good chance a riser out of one of the other AST desktops of that model would work though, that looks like the same edge connector mine had. Mine also didn't have sound card bits, it was just 3 ISA slots. Perhaps one of those might be easier to find...

For those ram clips. This is where I say “Pls… help me understand this” 🤭 (I got that from a guy on another YT Channel)

Previous owner probably saw the cursor being possessed and decided to destroy the machine lol

I posted a comment on this video hours ago and now it's gone? Anyway it was about the capacitor. The K stands for 10% precision. That is a 47 picofarad cap. Not nano. I just learned about this yesterday watching one of Necrowares videos about repairing a 386 board.

About that keyboard in S1: it sometimes happens that if you use more modern keyboards with ps2/AT adapter and hook it up to old motherboards it may give you issues. Try other keyboard.

So old school 😍 Fun fact DosBox doesn't have Nicad batteries or bad caps 😉 Edit Our first pc was a AST advantage pro 386sx/25. I wish it was still around or that I could find another one,heck just the case would be nice to have

I've got a bunch of those simm stackers still in the box!

There is one of those ast risers currently on ebay in the usa plus i have one if you really end up needing it but im in the uk

You got just a small taste of Varta hell! One thing a Varta can't do though is tear a riser card, who would do such a thing?

47K is 47 Picofarad. capacitors that dont have the 3rd digit are default as Picofarad.

Mike you should use MHDD to check for drive integrity it gives a much better picture of the health of the drive

when you ran chkdsk it showed the volume was made in 1997. its just someone used it later on and had put a fresh drive in it. I saw in the case there were parameters for a connor drive written down.

Is your cat still scared of the garage? I'd love to see more of her 🥰