No video
94-01 Integra accessory belt replacement
Рет қаралды 37,534
Күн бұрынHow to change out your belts on an Integra. 94-01 Acura integras b series b18c1 b18c5 type r. It’s the same on Si civics with the B16a engines. 97-01 Honda CRVs are similar.
www.rockauto.c...
Check me out on Instagram :
...
Follow my Honda Garage page on Facebook
This video is for reference purposes only.
Disclaimer: Due to factors beyond control of Moore Projects, I cannot guarantee against improper use for unauthorized modification of this information. Moore Projects assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Moore Projects.
@smith_everything 3 жыл бұрын
Good video at showing the right things to do when changing these belts. Made the job way easier. Thanks!!
@skyance4992 Жыл бұрын
Just bought an integra, got it home and the alternator belt snapped, your video is a life saver!
@MooreProjects Жыл бұрын
I’m glad this helped you out!
@ts_diamond8569 Жыл бұрын
doing the belts on my 96 integra tomorrow, will definitely becoming back to this video! edit: new belts installed! this video came in very handy. made me jealous because almost all the bolts on mine are rusted to shit lmao
@joshuawhitaker7169 Жыл бұрын
This is literally the best video of this I can find. Thank you!
@MooreProjects Жыл бұрын
Awesome! Glad that it is able to help
@danielrivera1833 2 ай бұрын
This is too accurate. I’ve searched for about 12 hours and finally stumbled on this masterpiece. There’s not a single video that’s done as well as this one…absolutely incredible work.
@emmanuelfernandez1259 Жыл бұрын
Audibly gasped lookin at the engine bay. Super clean man!
@gooobiepls 3 жыл бұрын
Just did this on a 2001 Integra LS and it was easy peasy. Thanks! 200k more miles to go!
@edwardcoronado4729 2 жыл бұрын
Awesome bro I appreciated that video am learning how to work on these cars my son just got a Acura Thank you
@ftnquarterki 2 жыл бұрын
I got the 95 integra and just so y’all don’t have to go through the same headache I did, if you get the 30 in ac belt you can’t use the idler/tension pulley you have to remove it.
@Patrick-tr6cm Жыл бұрын
Just had the same sorta issue with my 98 rs, came to the comments and saw this (thankfully)
@brandonf.8533 Жыл бұрын
Dude this video dead @ss saved me my belt broke last night and I didn’t know how to replace any of it thank you 🙏 got a broken lil DA5 🥲
@ifyoudobutdont9774 3 жыл бұрын
You can still go counterclockwise to rotate the alternator back on. The way I do it is put the alternator belt on the crankshaft pulley then get the belt to slide next to the from on the left side of the alternator and once the belt is caught on the lip of the alternator pulley that’s when you turn the crank counterclockwise from below one hand guiding the belt with your hand or a pry and the other hand turning the crank counterclockwise.Usually if you have the belt on the left side of the alternator pulley lip then it would guide the belt without you using anything but the crank itself. But it does help The alternator belt is the hardest belt to replace the other ones are a piece of cake
@bagfumbler 8 ай бұрын
Idler pulley went out on my integra so this video will be very helpful
@touringteg 10 ай бұрын
Thanks for the excellent video! I have a 98 ITR that didn't have AC. I just installed a full AC system from another 1998 and I just need to install the belt and get the AC system charged.
@israelnieves2817 3 жыл бұрын
Awesome video likes how well you explained it, straight to the point. Thanks alot.
@PROPERNATOR Жыл бұрын
Great video, made me understand my teggy better.
@E4_Maf1a Жыл бұрын
Just the video I was looking for. Thanks man 👍
@MooreProjects Жыл бұрын
Good luck!
@goodvibesonly1920 3 жыл бұрын
Man you make it look so easy bro, gotta change my alternator belt with myself
@AndToTheRepublic4WhichItStands 2 жыл бұрын
Those are easy. You got it
@goodvibesonly1920 2 жыл бұрын
Yeah it was easy plus I changed alternator is well, I saved ton of money by doing it myself & watching KZfaq vids
@isaiahmalfavon2488 Жыл бұрын
Great video going to attempt on my 92 Integra tmw.
@catsinflames4598 3 ай бұрын
commenting to save this perfect video
@jerridroberson3966 3 ай бұрын
This is a great video.
@riverwarts9084 2 жыл бұрын
So I didn't see you mention going back and tightening up the AC tensioner Pulley that you loosened with the 12mm. Do you lift it back up an tighten it down after you slide the belt off? I'm about to tackle ALL the belts, timing included, just wanna make sure I get shit dialed back properly. Thanks for your video, I will be following it 100%!
@MooreProjects 2 жыл бұрын
After you set the tension with a 8mm or 9/32nds socket, then tighten down the 12mm
@MooreProjects 2 жыл бұрын
Hope it helps you out. You got this!
@riverwarts9084 2 жыл бұрын
@@MooreProjects much appreciated! It just seemed like such a drop from old belt to new belt I'm like wait, how did he get that Pulley up an tight haha. Thanks man, I'm actually a small Motors mechanic by trade, but just hate opening up my precious GsR. I'm the second owner and I've had it since 2007 an she's in insanely great condition. I did my wife's timing belt/water pump on the MDX 12 straight hours of wrenching so I think it's given me the jitters with doing mine lol. Thanks again, great video and content.
@jace3209 10 ай бұрын
vid came in clutch thx 🙏🏽
@xXXFALLENXXx1991 2 жыл бұрын
Amazing video ,you a real one for this
@anthonydc4 3 жыл бұрын
Nice video man! I just wanted to make sure I knew how to do it right before I jump right into it lol
@azjavi7827 2 жыл бұрын
Great video man !!!
@trueroyalty3342 Жыл бұрын
Great video friend!
@justinthesedays3318 Жыл бұрын
Clean gsr 🔥🏎️
@lukeojeda7656 Жыл бұрын
love it, it helps us❤️❤️❤️
@furiousphil4831 2 жыл бұрын
Awesome video thanks 😊
@Qghostz 2 жыл бұрын
Thank you for video 👍
@adamboyd6992 3 жыл бұрын
nice tutorial bro!!!
@danidpassportintegra5371 3 жыл бұрын
👌💯
@Username4jp 2 жыл бұрын
Thank you 🙏
@MooreProjects 2 жыл бұрын
No problem hope it helps
@josephdwaynejr.2743 3 жыл бұрын
Where can I get a bolt that holds on that balancer that’s connected to the alternator it’s keeps coming out from under my car
@SweetHere111 2 жыл бұрын
At 9:25, it is a 7mm to adjust.
@drehenry8683 2 жыл бұрын
Love this thx bro
@MooreProjects 2 жыл бұрын
Glad it’s helpful
@wilalday473 2 жыл бұрын
Great video, I just finished this job. For anybody else, my A/C tensioner bolt is 14mm for my 1997 gs. Also, where did you get your purple hardware for the bumper?
@MooreProjects 2 жыл бұрын
eBay. 10 pack from China for like $5. Search for dress up bolts
@fabriceshindano9506 3 жыл бұрын
Thanks a ton man!!
@MooreProjects 3 жыл бұрын
Hope it was helpful
@smooththrilla4631 Жыл бұрын
What’s he belt sizes
@rainelo3963 2 жыл бұрын
What size bolt is that tensioner on the power steering? I've been looking for one for a very long time.
@MooreProjects 2 жыл бұрын
M8x1.25 and I would get one 60mm long
@methakims5797 3 жыл бұрын
Nice 👍🏿
@MooreProjects 3 жыл бұрын
Thank you
@josephdwaynejr.2743 3 жыл бұрын
I have a 1995 my alternator works but isn’t connected because my harmonic balancer Keeps falling underneath the car while driving and I lost the bolt that holds it in the motor where could I get one
@MooreProjects 3 жыл бұрын
Junkyard or the dealership
@locoj 2 жыл бұрын
Just got the bolt from dealer for 29.99
@jessechavez1141 2 жыл бұрын
Pretty much the same for a 91 DA9 right?
@MooreProjects 2 жыл бұрын
Yeah for the most part
@jessechavez1141 2 жыл бұрын
@@MooreProjects thanks for the vid, smooth process!
@lowkey-_-clutch1284 2 жыл бұрын
My alternator belt just will not go on. This thing seems way too small it's a 310 one.
@MooreProjects 2 жыл бұрын
You might have something not allowing the alternator to slide far enough forward to slip it on. If not I’m not sure why the 310 belt isn’t fitting yours. What year Integra and engine do you have?
@MarioGonzalez-pp4lc 2 жыл бұрын
Having the same problem
@MarioGonzalez-pp4lc 2 жыл бұрын
@@MooreProjects i have a 96 acura integra with a b18b1
@MooreProjects 2 жыл бұрын
@@MarioGonzalez-pp4lc might be a difference in length for the b18c1 and the b18b1
@MarioGonzalez-pp4lc 2 жыл бұрын
@@MooreProjects well im almost done. Im not a professional mechanic but i took off the top bracket connected to the engine and that gave me just enough space to work with the belt and somehow some way im almost done
@024runner 3 жыл бұрын
Great vid?
@MooreProjects 3 жыл бұрын
Likeakidagain thank you buddy
@jspecricer2734 3 жыл бұрын
1'st
AHC Garage
Рет қаралды 29 М.
Jack of All Master of None
Рет қаралды 174 М.
Cool Items Official
Рет қаралды 9 МЛН
Skill Collectors
Рет қаралды 1,9 М.