Congratulations His works are amazing. I'm doing the helmet and the Iron Man glove, following their videos.
@weathergirl10679 жыл бұрын
I've been scouring the internet for an awesome Ultron tutorial! Great work!
@tbropaquini9 жыл бұрын
Great video! I would go with spray paint. It comes out very shiny and metal looking like your daft punk helmet. Thanks as always and can't wait to see the final product.
@MCbadass79 жыл бұрын
That looks friggin awesome! I'm totally wearing one to the movie theater!
@minecrafter001andreluis89 жыл бұрын
Nice Ultron. Yeah tomorrow I'll make this helmet
@notanactualyoutubechannel17929 жыл бұрын
Sauron Helmet would be awesome to see one day.
@DALILOMODIY9 жыл бұрын
Ultron: no strings attached... :)
@JonathasJunior9 жыл бұрын
Dali DIY only a lot of glue
@darryldaleespancho51609 жыл бұрын
When are you going to upload the next part? Im planning to wear this helmet on the premiere of avengers 2 (april 22 Philppines)
@shadowprime42739 жыл бұрын
Dali DIY cool
@MCbadass79 жыл бұрын
Dali DIY Hello, I've tried using kitchen foil before, and it just doesn't work. It's especially frustrating when the foil eventually begins to peel off of the surface. Most craft glues aren't designed to tick to metal for very long, especially nonstick aluminum foil. I wouldn't suggest foil. I would totally go with chrome paint. If the reason for that idea was to create sort of a smooth outer layer, I would rather suggest using paperclay and covering the rough areas (or even the whole thing), and sanding it. This eliminates the need of an outer layer to make up for even the most subtle imperfections. That's what I do: Clay-sand-clay-sand. It's tedious but it looks AMAZING once finished. And if you don't want to do that, then there's actually a product out there called "Plasti-dip spray", which is like a spray-rubber/plastic that gives a smooth layer of material on top of any surface. I haven't tried this yet, but it actually looks promising. I've already ordered a can. If you try this out then you should first test it out on a small piece of cardboard before doing it to the entire piece. But yeah I wouldn't reccomend foil. It sounds like a great idea in thought, since it might give it a metal look. But in reality it wouldn't end well.
@DALILOMODIY9 жыл бұрын
Jonathas Junior true :)
@UndetectableSn1per9 жыл бұрын
Definitely chrome spray paint. The foil will leave wrinkles which will make the helmet not look as nice
@londonink9 жыл бұрын
Looks awesome and spray paint silver
@joeyleone26179 жыл бұрын
Awesome Chrome spray paint
@grigoregodina91735 жыл бұрын
Courier and 9958558858588;×&&×*×**5858t88mñiFjfjhhjgif8i
@alexmighty6937 жыл бұрын
favorite so far.
@dazedbull92739 жыл бұрын
I want to see how you complete your work with foil.
@AcrimoniousMirth9 жыл бұрын
Hey Dali, thanks for the awesome creations! I made the mannequin head, using masking tape instead of hot glue and paper mâchéing it. It turned out really well! Thanks for the cool vids :)
@jaredhansen25219 жыл бұрын
Instead of tin foil, you should use foil tape. It would go easier and look very smooth.
@DALILOMODIY9 жыл бұрын
***** good idea, maybe i will do that :)
@PhilipSmith9 жыл бұрын
This is awesome! I'm finishing up my mark 43 to wear to opening night. I also have cap's shield that hooks to your back via magnets. For that I used aluminium foil, it is really shiny, but it's also really hard to not have the wrinkes on a curved surface. It worked well for Thor's hammer though! I think that your best shot would either be with chrome or just a silver with a shiny clear coat. The helmet looks awesome and I'll be sure to have one made by May 1st! Keep building costumes!
@UgoAno9 жыл бұрын
Love to see your Shield!
@PhilipSmith9 жыл бұрын
I'll probably post some pics from opening night! I simply cannot wait any longer for Age of Ultron to come out. I've spent so much time making avengers gear the past month it's unreal!
@UgoAno9 жыл бұрын
Look forward to it! Tag me when you post. I'll watching opening night. Think the most I'll do is an arc reactor Lol
@PhilipSmith9 жыл бұрын
Haha, that'll work. Wear the extremis shirt with it, that'd look cool! Google glass could be the cherry on top!
@UgoAno9 жыл бұрын
Yeaaahh! (Long as I don't get kicked out of the theatre because of it Lol)
@superhashka9 жыл бұрын
try the paint first and if you don't like it, use the foil
@redwineismypassion9 жыл бұрын
That's so amazing
@minecrafter001andreluis89 жыл бұрын
I guess you cold use spary paint Because kitchen foil is a bit bumpy
@jakehuss8999 жыл бұрын
Foil would wrinkle and wouldn't attach well to the cardboard I say use paint
@DALILOMODIY9 жыл бұрын
Myron Aldric Tolentino poster board maybe, foam board i think not :)
@PatAndMarZim9 жыл бұрын
I am a fan you rock, I am doing the spiderman mask tutorial although I don't get it
@awesomechannel99299 жыл бұрын
Use the chrome paint. Foil will look too wrinkly
@aquintero4769 жыл бұрын
Dude I cannot stop saying I just love your channel 😝
@DALILOMODIY9 жыл бұрын
KRiderGeek NationNews thanks :)
@dakshgupta5739 жыл бұрын
Thanks friend i wanted the same
@minecrafter001andreluis89 жыл бұрын
I really like your helmets, dude:-)
@dudebromcdude19087 жыл бұрын
Screw sizing it down. I just use letter paper and click "Fit to page"
@keyshawnpeavie26049 жыл бұрын
U should do the flash cowl mask or kid flash
@kimo_9 жыл бұрын
The good thing is that is not a helmet but a head so you have a cool prop even you have not a costume.
@DALILOMODIY9 жыл бұрын
kimo thanks, agreed :)
@laylowww9 жыл бұрын
when u r done with this can u make a rey mysterio mask
@rostymatos83369 жыл бұрын
i think you should use aluminium tape insted of tin foil or paint
@matthieuinduni31569 жыл бұрын
So hyped for the next episode ; )
@jaimex15entertainement429 жыл бұрын
i love all your cretions
@DALILOMODIY9 жыл бұрын
Jaimex15 Fierro thanks :)
@NeonFuCreators9 жыл бұрын
Can you make a taskmaster mask?
@qtip76979 жыл бұрын
I HAVE to finish this before May so I can just walk in and fool everyone into thinking I'm Ultron lol
@sayawhitedimas9 жыл бұрын
Qasim Bilal THIS IS WHAT IM THINKING!! HIGH FIVE BRO!!! im startring to build this now! thanks DALI DIY!
@xueko6669 жыл бұрын
Exelentes videos te pongo casa
@farrellsprops80659 жыл бұрын
I would chrome spray it it will give it a better finish
@agustinzabaleta98652 жыл бұрын
no sirve ningun archivo de descarga de los modelos
@JuankaMArt9 жыл бұрын
Hoola !! que genial videoooo !!: D yoo te diria que lo pintes con aerosol plateado !! va a quedar mucho mejor !! :D
@sinner1969 жыл бұрын
cant wait for next vid already starting this one. wondering if you could do an optimus AOE helmet only one i found is one someone took from the papercraft version and scaled it bigger, but it looks and feels like a box on your head. i like how simple and easy you make it, also affordable.
@DALILOMODIY9 жыл бұрын
tony amaro maybe not, transformers is quite complicated :)
@8913jhon9 жыл бұрын
Excelente...
@soyfit9 жыл бұрын
which cardboard millimeters do you usually work with?
@DALILOMODIY9 жыл бұрын
soyfit i used single corrugated cardboard :) dali-lomo.blogspot.com/p/faqs.html
@xytyz_9 жыл бұрын
I don't know about spray or foil for you,but I would go with foil paper as I get problem if there are wrinkles in the foil... :)
@xytyz_9 жыл бұрын
I wouldn't *correction*
@marcusmcbay60669 жыл бұрын
Love your vids!
@rostymatos83369 жыл бұрын
hello if you can please make an iron man mark 17 'heart breaker" helmet it would be very much appreciated
@1dumba559 жыл бұрын
Chrome paint...! No tin foil for that beauty.
@UnknownVoices0126 жыл бұрын
Would this work with EVA foam, or is this tutorial only for cardboard material?
@DALILOMODIY6 жыл бұрын
yes you can use eva foam
@MrOngtrum19 жыл бұрын
next ..... helmet for REPTILE in MORTAL KOMBAT ^_^ pleaseeee
@agasol269 жыл бұрын
Hey buddy! What kind of cardboard we should use? Anything? Congrats!
@1ManOnFir39 жыл бұрын
Plastidip (or flexidip) then chrome spray paint with black dry brush or air brush weathering
@MCbadass79 жыл бұрын
Joe Di Donato Lol I literally just recommended plastidip to him a second ago. I figured that the reason for the foil idea was to create a smooth outer layer in order to eliminate imperfections of the rough cardboard, but I think plastidip would be better for that, from what I've heard. I guess great minds think alike :)
@DALILOMODIY9 жыл бұрын
Joe Di Donato ***** but plastidip is kinda pricey, even the cheap no name brand still pricey than regular spray paint. anyway, someday i will try it :)
@TheLegoNewsReporter9 жыл бұрын
YES!
@bushranger60159 жыл бұрын
Would it possible to follow this same procedure but on foam instead of cardboard?
@DALILOMODIY9 жыл бұрын
Bushranger yes, you can use foam in this project :)
@OriginsBuilds9 жыл бұрын
going to make a flash helmet and suggestions??
@DALILOMODIY9 жыл бұрын
Origins & Builds make it semi-rigid like deadpool kzfaq.info/get/bejne/hMynfttk1L6omJ8.html :)
@michabella169 жыл бұрын
On all your videos can you rate how hard the mask are to make on a scale of 1-10. I want to know what I can and can't do
@DALILOMODIY9 жыл бұрын
Martine Dorobanti actually i don't know how to rate them, maybe "less pieces = simpler"? :)
@myronaldrictolentino66869 жыл бұрын
Can I use Illustration Board or Foam Board to make this ? Thanks, and btw great work
@robisded9 жыл бұрын
Could you make the fore arm for the iron man gauntlet if you ever get the chance
@DALILOMODIY9 жыл бұрын
Alva Hux maybe not so soon :)
@EpikOfficial1689 жыл бұрын
Next part fast pls, we can't wait
@DALILOMODIY9 жыл бұрын
EpikOfficial168 i can't work that fast, without Jarvis helping :)
@EpikOfficial1689 жыл бұрын
Dali DIY Who is Jarvis ? lol
@smberkzerk099 жыл бұрын
EpikOfficial168 did u really just ask that, you should be ashamed of yourself
@EpikOfficial1689 жыл бұрын
lol
@ViLynxe9 жыл бұрын
Wait so after you finish paper mâché you can take off supports?
@DALILOMODIY9 жыл бұрын
ViLynxe yes, it is only temporary, remove once the helmet harden :)
@robertotorres92489 жыл бұрын
Thanks Dali
@DALILOMODIY9 жыл бұрын
Roberto Torres you are welcome :)
@HurstGavla9 жыл бұрын
I think spray paint its better :) Ans please ant Man after ! ;) How old are you ?
@f76gg9 жыл бұрын
great work
@DALILOMODIY9 жыл бұрын
Felipe Garcia thanks :)
@Keownrex9 жыл бұрын
How about a Velociraptor helmet for the upcoming Jurassic World movie?
@DALILOMODIY9 жыл бұрын
Keownrex maybe not :)
@abudirasheed5489 жыл бұрын
Witch glue do u use to let the paper stick with the cardboard
@DALILOMODIY9 жыл бұрын
Abudi Rasheed glue stick :)
@seeminglyRANDOM889 жыл бұрын
Another great tutorial! Keep it up!
@DALILOMODIY9 жыл бұрын
seeminglyRANDOM88 thanks :)
@seeminglyRANDOM889 жыл бұрын
Anytime ;)
@rianherdiansyah36309 жыл бұрын
hallo,, what a glue name for make layer helmet with piece of paper? thx,,,
@DALILOMODIY9 жыл бұрын
Rian herdiansyah PVA glue, aka white glue, wood glue :)
@Deadpouk9 жыл бұрын
Nice work! :) you must some kind of cardboard god :p
@DALILOMODIY9 жыл бұрын
MisterAtrace haha :)
@christopherrardin22239 жыл бұрын
wow!!!!!
@mariordgz28769 жыл бұрын
Dali good video greetings
@DALILOMODIY9 жыл бұрын
Mario Rdgz hello :)
@mariordgz28769 жыл бұрын
Dali DIY Dali recuerdas el casco de daftpunk de tomas mi pregunta es que le pusiste para alisar la parte de arriba
@DALILOMODIY9 жыл бұрын
Mario Rdgz ya Mario, i remember you sending me your Thomas helmet picture :)
@dinocujko9 жыл бұрын
Hey Dali, i was always wondering how can i open a template that is in size ro fit on my head ? Because sometimes i made a helmet or something from templates and at the end it didnt fit my head... could you please explaint how ?
@DALILOMODIY9 жыл бұрын
DinoCujko these :) kzfaq.info/get/bejne/oL5_iNR5tKqrgnU.html kzfaq.info/get/bejne/oL2Yi6hq39eXh5s.html
@Shamonia1239 жыл бұрын
Definitely chrome spray paint
@_Jain_S9 жыл бұрын
Black base coat with chrome
@cleytonmartins31289 жыл бұрын
please Halo ,helmet.next vedio.
@bambambombom75649 жыл бұрын
Sir do have a video on how to make a motorized helmet of iron man? That open and close the face plate automaticaly.
@DALILOMODIY9 жыл бұрын
Bambam Bombom i'm not very good in electronic :)
@bambambombom75649 жыл бұрын
Ah. Ok sir. Thanks
@jaimex15entertainement429 жыл бұрын
you also need to do the ultron of the movie
@DALILOMODIY9 жыл бұрын
Jaimex15 Fierro maybe not :)
@davidcavallo36619 жыл бұрын
Sos un groso!!!! Siempre a la espera de tus nuevos videos (=
@DALILOMODIY9 жыл бұрын
David Cavallo gracias :)
@prestontaylor75019 жыл бұрын
What's the difference with normal hot glue and the black glue your using? Is it stronger? Or just cooler haha :) awesome build by the way!
@DALILOMODIY9 жыл бұрын
Preston Taylor no difference, just color :)
@cleytonmartins31289 жыл бұрын
use chrome paint
@robertotorres92489 жыл бұрын
Hey Dali where can find the templates for the red hood mask the Jason Todd one
@DALILOMODIY9 жыл бұрын
Roberto Torres try here :) dali-lomo.blogspot.com/p/useful-resources.html
@tarsissilveira39149 жыл бұрын
Please, can you do ant-man's helmet?
@OriginsBuilds9 жыл бұрын
oh and I was wondering what that glue is that u use because it doesn't look like normal hot glue gun sticks??
@DALILOMODIY9 жыл бұрын
Origins & Builds actually same, just color differ & looks cooler :)
@OriginsBuilds9 жыл бұрын
haha probable easier clean to any thanks :)
@marccafe95439 жыл бұрын
What if i carve in the facial features with a stanley knife would that work?
@DALILOMODIY9 жыл бұрын
Fanny mcfee you mean carve it to match the movie's Ultron? :)
@marccafe95439 жыл бұрын
Dali DIY I mean like make the head base and then carve in the details
@DALILOMODIY9 жыл бұрын
Fanny mcfee sure you can :)
@marccafe95439 жыл бұрын
Dali DIY I'm thinking of using this for one of my junior cert projects (without the colours and stuff) It looks quite artistic like this if that's k with you =)
@jackharpertech49 жыл бұрын
Nice
@pewdiepie74149 жыл бұрын
Hey dali, can you tell me what is the application that you use to edit your videos?
@DALILOMODIY9 жыл бұрын
Cosmos Sho windows movie maker :)
@juansebastianalbanilrodrig84799 жыл бұрын
“No puedo sacar los planos completos del mark 42'' ¿no puede hacer un vídeo de como descargarlos? por favor.
@DALILOMODIY9 жыл бұрын
Juan Sebastian Albañil Rodriguez excuse my Spanish, what do you mean "how to download"? :)
@DALILOMODIY9 жыл бұрын
Juan Sebastian Albañil Rodriguez dali-lomo.blogspot.com/2013/12/im-mark-42-diy-cardboard-build-with.html
@stickman23249 жыл бұрын
I had a question about the board you used on guy & thomas helmets - what is it? I can't find it anywhere.
@DALILOMODIY9 жыл бұрын
stickman2324 mounting board, try find it from store where sell graphic designer supply :)
@stickman23249 жыл бұрын
Ah, okay. I was looking all over (in canada) and I couldnt find anything
@DALILOMODIY9 жыл бұрын
stickman2324 you can use any paper board :)
@ahansharma24748 жыл бұрын
Can it fit a 8 yrs old kid,I'm thinking to make for my lil brother
@DALILOMODIY8 жыл бұрын
+Ahan Sharma i'm not sure but you can compare this dali-lomo.blogspot.com/p/head-measurements.html , FYI, this helmet is largen than usual helmet, because it is ultron :)
@rahulkose54576 жыл бұрын
このマスクは最高です
@DALILOMODIY6 жыл бұрын
domo arigato :)
@rahulkose54576 жыл бұрын
どういたしまして
@rahulkose54576 жыл бұрын
あなたはすべての工芸品をとても完璧にやっています。私はあなたに触発されています
@tylerrizzuto38768 жыл бұрын
what scissors are you using that cut cardboard so easily
@DALILOMODIY8 жыл бұрын
+Tyler Rizzuto just regular scissor :)
@tylerrizzuto38768 жыл бұрын
+Dali DIY are they smaller than say orange handled ones that are about eight inches long?
@DALILOMODIY8 жыл бұрын
Tyler Rizzuto bigger better :)
@AyuSh_115 жыл бұрын
There r no strings on me
@SuperJoss979 жыл бұрын
Do you think you will make also the movie version?
@DALILOMODIY9 жыл бұрын
Il Fabbricante di Draghi i don't think so, not a big fan of that ultron :)
@velthraytor61799 жыл бұрын
"there are, no strigs on meeeee"
@gourishankars3907 жыл бұрын
go with chrome paint
@deanhaley64469 жыл бұрын
love it thanks for the file to make my own bit hard for my first one but what sissors do you recomend for theese. just wondering ive bought a few sets but not really found one i like
@DALILOMODIY9 жыл бұрын
dean haley preferably heavy steel scissor :)
@deanhaley64469 жыл бұрын
thanks
@JouniorBlue9 жыл бұрын
When will part two be uploaded
@DALILOMODIY9 жыл бұрын
JouniorBlue hopefully this week :)
@yuugenkk9 жыл бұрын
Make a mask of Sub-Zero mortal kombat
@tonyschannel17869 жыл бұрын
Omg yes thank you I've been waiting for the one XD
@DALILOMODIY9 жыл бұрын
Tony Stark didn't you create Ultron in the movie? Tony? :)
@tonyschannel17869 жыл бұрын
pfft...what you taking about? I didn't create anything. XD
@Jonathan-qn3xy9 жыл бұрын
how many hours did this take?
@DALILOMODIY9 жыл бұрын
Jonathan Sarasa 3 to 4 days, about 24 hours in total :)
@tylercooke31639 жыл бұрын
you should make How to Train Your Dragon 2 hiccup mask
@legosleaguer83849 жыл бұрын
Do you know when you going to do a halo helmet?
@DALILOMODIY9 жыл бұрын
Tigress8929HD not that soon :)
@donaldotrampi81849 жыл бұрын
After ultron...vader!!
@MCbadass79 жыл бұрын
THeQubicSize 238 Well...the new Star Wars is coming out very soon. Perhaps the new stormtrooper design. In my opinion, I think that the new stormtrooper design looks totally badass!
@ahansharma24748 жыл бұрын
Can u tell me what size of template u used btw its amazing