98 Chevrolet 1500 flywheel replace
Рет қаралды 18,505
Жыл бұрынFull detail flywheel Remove and replace
@jacobiw Жыл бұрын
Thank you so much for taking the time to document and record this! I just bought a 97 K1500 sight-unseen that just went through a tranny swap. It currently will not turn over, it seems that something is wrong with the starter, flex plate, or torque converter. I've been looking all over for a video showing the entire process to separate the transmission from the engine on this specific truck and yours is the first one I've found. Many videos just started with the transmission already separated. I really, really appreciate this. It'll be a couple more weeks before I get to where the truck is stored and I am trying to do all the research I can before hand. It'll be a little different since my truck is 4x4 and will have the transfer case to deal with, but hopefully it won't be too different.
@eye-ntheskybillysimmons Жыл бұрын
Best of luck kind sir👍
@eye-ntheskybillysimmons Жыл бұрын
Another note to be watchful for ; your flex plate needs to be installed in a particular “direction” If installed backwards it could cause how it sounds yours is behaving Another possibility is a slightly incorrect flex plate as well
@jacobiw Жыл бұрын
@@eye-ntheskybillysimmons Thanks for the tip
@jacobiw Жыл бұрын
@@blakeishere4u do you know what change made a dished flex plate necessary? If the previous owner swapped a 98 transmission into a 97 truck, could that potentially be the issue?
@flakocambron9684 10 ай бұрын
Did you figure it out?
@devonpyle7072 4 ай бұрын
Thank you for sharing your time and knowledge it is greatly appreciated and I will be using the longer bolt for sure. It seems like it would help tremendously.
@Railrider765 Жыл бұрын
Always torq in a sequence! 😎
@procure.r9290 3 күн бұрын
great video sir but i'm having a issue my flywheel will not spin for me to have access to the torque converter bolts
@eye-ntheskybillysimmons 3 күн бұрын
@@procure.r9290 kzfaq.info/get/bejne/lZOhlKWc3trIiX0.htmlsi=zqO0L2waDj4X6dj6
@dDayye 4 ай бұрын
The torque converter bolts are loose on my 98 c1500, 4.3, can I get to them by removing the cover or will I have to remove the starter?
@eye-ntheskybillysimmons 4 ай бұрын
No quick way to, at least that I’m aware of Best of luck kind sir
@johnscarbrough115 Ай бұрын
What way is left on the peice on the drive shaft is it facing towards the front or back
@eye-ntheskybillysimmons Ай бұрын
So sorry I’m not understanding your question
Scotty Kilmer
Рет қаралды 605 М.
ISSEI / いっせい
Рет қаралды 93 МЛН
MCRP Towing and Recovery
Рет қаралды 7 М.
1A Auto: Repair Tips & Secrets Only Mechanics Know
Рет қаралды 746 М.
IDK_Mr.M
Рет қаралды 207 М.
Daniel Rescue Movers
Рет қаралды 138 М.
keanclip1
Рет қаралды 1,8 МЛН