9G Tronic Transmission Service Fluid Level Check known as 9Speed 725.0 NAG3 W9A700 JR913E

Рет қаралды 47,169

Жыл бұрын

9 Speed Mercedes GLE350D 9G Tronic 725.0 NAG3 W9A700 JR913E Automatic Transmission Service & Fluid Change Oil Change Special Tool required which has a key to select 1. Filling, 2. Slow Level Check, 3. Fluid level Check at 39C, 4. Drain Fluid ( approx 1cm fluid will remain in Transmission Pan )
#mercedestransmission #mercedes #cars #automotive #transmission #gearbox #automatictransmission #autorepair #auto #diy #tutorial #howto #yepthatsit
Showing how I do Repairs, Mods & Servicing - NO FRILLS.
* The use of this information is at YOUR OWN RISK & LIABILITY. NO Warranties are Expressed or Implied. Videos are for entertainment purposes ONLY !
Hi, if a YepThatsIt Video has helped you out in ANY way or saved you some $$$, please consider helping SUPPORT and motivate us to make more.
BUY ME A BEER ! CLICK HERE www.paypal.me/BATS189 ( send as a gift otherwise PayPal will take out a fee )
For more technical questions, we can share pics/info/vids/beers via our facebook link / yep-thats-it-103051017...
* If you like our videos PLEASE LIKE, SHARE & SUBSCRIBE to encourage us to continue to make videos....much appreciated !
If you don`t like them PLEASE recommend them to your enemies !
Don't forget to also hit the bell icon ( top right ) for ALL notifications. KZfaq has changed what they show subscribers
9G Tronic Fluid Change
9G Tronic Oil Change
9G Tronic Fluid Level
9G Tronic Oil Level
725 Fluid Change
725 Oil Change
725 Fluid Level
725 Oil Level
NAG3 Fluid Change
NAG3 Oil Change
NAG3 Fluid Level
NAG3 Oil Level
W9A700 Fluid Change
W9A700 Oil Change
W9A700 Fluid Level
W9A700 Oil Level
JR913E Fluid Change
JR913E Oil Change
JR913E Fluid Level
JR913E Oil Level
Mercedes C-Class
2015 - 2021 Mercedes-Benz W205 (all models)
2022 - On Mercedes-Benz W206
Mercedes E-Class
2014 - 2016 Mercedes-Benz W212 (E 350 BlueTec Diesel Technology only) available as option to others.
2016 - On Mercedes-Benz W213 (all models)
Mercedes S-Class
2017 - 2021 Mercedes-Benz W222 (all except V12 models)
2021 - On Mercedes-Benz W223
Mercedes V-Class
2020 - On V-Class (W447) (longitudinal engines)
Mercedes GLC-Class
2015 - On GLC
Mercedes-Benz GLE-Class
2016 - 2019 GLE (W166) (except 63 AMG & 350 models)
2020 - On GLE (W167) (except 63 models)
Mercedes-Benz GLS-Class
2017 - 2019 GLS (X166) (all except AMG)
2020 - On GLS (X167)
Mercedes-Benz SLK-Class
2015 - 2020 SLC (R172) (except 55 AMG)
Mercedes-AMG models
Mercedes-AMG SL
2022 - On AMG SL (R232)
Non Mercedes-Benz Models by JATCO as the JR913E
Nissan
2016 - 2018 Titan
2018 Frontier
2018 Fuga
2018 Skyline
2020 - On Nissan Titan
2020 - On Nissan Frontier
2023 - On Nissan Z
Infiniti
Aston Martin
2021 - On Aston Martin DBX V8 and Straight-Six
2022 - On Aston Martin DBX707
ewffiHwh3792wyp9y2yr723#%%&%ÊADG$^^$$^#$%^$%&

Пікірлер: 112

@LazaroMonroy-Batista 3 күн бұрын

Very good video. If you are doing this job make sure you have the correct chassis, if you have model 166 or 292 the transmission temperature to set level is 59 C not 39 C. but all other steps in this video are correct. Thanks for sharing

@nicario9534 Жыл бұрын

Nice video, i´ve been looking for a full and detailed description for a long time. Thank you for that!

@YepThatsIt Жыл бұрын

glad if helped, hopefully deserves a beer ! link is in description cheers

@antonyweaver357 5 ай бұрын

Great video! I have seen several videos on the 725 kit that range from ok/good to almost unwatchable! So glad to say that yours is steady, really informative and you show the annoyances & workarounds needed in the real world… Top job - thanks for your efforts! 🙏👍👏

@YepThatsIt 5 ай бұрын

no worries, thanks & cheers

@vickeshishian6904 7 ай бұрын

fantastic video, you guys actually took your time and explained it in detail .. i’m a mechanic in toronto and it’s getting harder servicing transmissions and making a honest living like we use to . Cheers

@YepThatsIt 7 ай бұрын

thanks & cheers

@gingerjessy Жыл бұрын

Just a tip on the transmission oils as I work on Mercs but only done one of these 9 speed transmissions so wanted a refresher. The oil you had there gives earlier spec stuff on the tin. 236.14 red oil. Older transmissions without start stop. 236.15 blue oil. 7 speed with start stop. FE (fuel efficiency) 236.17 gold. New 9 speed transmission. 9G tronic. Mercedes are a nightmare for changing part numbers. The black tube inside the pan which doesn't do anything is for external ultrasound level reading. Special tool.

@YepThatsIt Жыл бұрын

thanks for that. cheers

@chrisa840 Жыл бұрын

Mercedes technican here. the 722.9 trans (7g) uses red oil 236.14 if its model year 10 or under. and it uses blue oil 236.15 if its model year 11 or up. remember mercedes changes model year in the middle of the year. the 725 trans (9g) uses 236.17 oil in the trans and 236.15 oil in the transfer case. i have done more oil changes on these than i have wanted to do lol.

@agondokusumo-111 Жыл бұрын

@@chrisa840 Does the GLE w166 with 9g tronic use 236.17 for the transmission and 236.15 for the transfer case as well? Thx

@chrisa840 Жыл бұрын

@@agondokusumo-111 if i remember correctly, yes

@adershjpvr Жыл бұрын

@@chrisa840 my gle 2018 showroom mechanic said done atf change at 60000 km now it's 66000 but I checked yesterday after running 100 km and it showed black colour will the transmission fluid shows black colour if we check ATF after running or is the ATF needs to be changed

@Motorcycledad160 Жыл бұрын

This really helped me with my 2022 Nissan Titan. Thank you very much!

@YepThatsIt Жыл бұрын

great to hear. cheers

@stevelash5821 Жыл бұрын

I have a 22 Frontier. Can you share which tools you bought for this?

@vinmega1074 Жыл бұрын

This is a great video and I watched it a few times before doing this on my S560 with the 725. Thank you for making this. I used Xentry to get the oil level at once the fluid warmed up. I wanted to get an ultrasound shop tool for future use.

@YepThatsIt Жыл бұрын

no worries, cheers

@vinmega1074 Жыл бұрын

@@YepThatsIt do these trans have overfill release valves? I have some oil on the ground, but everything is shifting and working smooth.

@josephhalwagy6435 Жыл бұрын

thank you for sharing

@YepThatsIt Жыл бұрын

thanks & cheers

@tsepangnoko1962 8 ай бұрын

Thanks tomorrow am doing gear 205 9G tonic transmission 9 speed automatic transmission service

@YepThatsIt 8 ай бұрын

no worries, cheers

@lenstar01 Жыл бұрын

Top video.. beer money is on its Way. 👌👍

@YepThatsIt Жыл бұрын

cheers for that !

@SP-ww8hv 6 ай бұрын

I forgot that was a deisel and when you were getting up to temp it freaked me out for a second haha

@YepThatsIt 5 ай бұрын

no worries. cheers

@CarMan321xlr8 Ай бұрын

Thanx Buddy

@tonychavez2083 5 ай бұрын

excellent video thanks!! i guess whats important is pos. 1 is FILL - pos. 4 is full DRAIN - pos. 3 drainoff EXCESS when @ correct 39 deg.C temp. - do i have that right? well done.

@rokg601 Жыл бұрын

Nice video, Theres a drain plug in the torque converter you can undo to drain 4 more litres. Remove rubber plug under bell housing, Then rotate crank pulley until you see plug, Its a 4mm hex and takes a while to fully drain

@YepThatsIt Жыл бұрын

awesome info, always good to share..cheers for that

@vinmega1074 Жыл бұрын

And it's a very soft screw....easily strippable.

@BoqnSlavkov Жыл бұрын

Sorry about the question but can you show me where exactly is that plug in the torque converter. And which is torque converter. I’ll do it by myself

@rokg601 Жыл бұрын

@@BoqnSlavkov Just in front of the pan, there is a rubber or plastic plug, you pry it out(its just a dust cover). Then you have to turn/rotate the crankshaft pulley with a socket+ratchet while looking through the hole where the plug/dust cover was with inspection light until you see 4mm hex head bolt. Remove bolt to drain torque converter, it drains slowly so will take 15mins or so.

@halleffect1 11 ай бұрын

I would like to do this but how the hell to turn the engine? the crank pulley is completely blocked by the intercooler, the alt pulley has no hex, there's nothing to put a socket wrench on..

@oncemore7116 Жыл бұрын

Thanks for the great video, when you jack up the transfer case to get to the most hidden bolt, assuming you move the transmission and engine up as well ?

@YepThatsIt Жыл бұрын

hi, yes it should lift a bit for better access. cheers

@EdasTattoo 11 ай бұрын

Hello, thanks for the video. I have my transmission oil changed 8 months ago, and I noticed now that this first cap is leaking oil. Can I just replace it with the new cap. It shouldn't drain much oil if I open it for replacement cap? Thanks

@ionutboruga6015 5 ай бұрын

Did you fill only approx 5 litres? Can you give me the part number of the special tool? Many thanks for the video

@mikhailmikhaylovich9201 5 ай бұрын

You poured oil into 9g tronic without MB 236.17 approval, not bad)) And they placed a pan of dubious origin))

@YepThatsIt 5 ай бұрын

thanks & cheers

@atrzebunianiebies Жыл бұрын

Thanks for the video. I didn’t see you cycle through the gears after initial fill and car start and before reaching temp of 39. Is this not part of procedure?

@YepThatsIt Жыл бұрын

hi, thanks for pointing that out, i`d say i probably didn`t film alot of stuff i should`ve and/or edited it out ? cheers

@bengleckl1877 Жыл бұрын

So number 1 to add. Number 4 to drain and if I want to check fluid level after refilling then I'm selecting number 3?

@YepThatsIt Жыл бұрын

hi, watch the vid again. will make more sense once you start doing it. cheers

@techdude30 11 ай бұрын

So I did the fluid change but not sure about the level how do I correct the level do I add fluid when the car is off on position 1 then let it spit out the overflow then start the car and let it reach 39 then flick it to position 3 and let it trickle

@YepThatsIt 11 ай бұрын

hi, watch vid again especially toward end from about 14:00 . you can top up a bit at position 3 while motor running if needs a bit more fluid cheers

@techdude30 11 ай бұрын

@@YepThatsItthank you for the reply . Just a question so I went ahead and removed the drain plug with the car OFF fluid was coming out !!. Does that mean it’s overfilled because in the video when you first removed the drain plug to start changing the fluid nothing was coming out . I closed it back up and started the car and went down after going through all the gears of course I removed the plug nothing was coming out so I added 500 ml then waited for the temp to hit 39 then flicked to position 3 until a trickle flow coming out like in the video and closed it . What do you think ? Cheers 🥂

@bengleckl1877 Жыл бұрын

Could u possibly post the part number for that silver fill adapter u used for filling?

@YepThatsIt Жыл бұрын

no sorry

@vinmega1074 Жыл бұрын

It’s a 5 x 12 Mercedes transmission adapter, you will find it on the web

@mattthomson6838 9 ай бұрын

Why flip it to position 1 when it is coming out at full stream on the final step? Wouldn’t you want to wait until oil stops coming out to flip it to position 1 to know that it isn’t over full?

@YepThatsIt 9 ай бұрын

hi, rewatch vid where i show the tap inside pan. cheers

@mattthomson6838 9 ай бұрын

@@YepThatsIt I did. If it’s an overflow, why would you close it when fluid is still coming out?

@Deszii90 11 ай бұрын

How often or after how many km does it need transmission service?

@YepThatsIt 11 ай бұрын

hi, we recommend transmission filter service every 50,000km when trans has done under 200,000km, then when over 200,000km service every 25,000km. dont forget to add magnets and bypass heat exchanger. cheers

@kevinagnew6878 Жыл бұрын

Merchandise is a nickname for Mercedes 😆 🤣 😂

@YepThatsIt Жыл бұрын

cheers

@halleffect1 11 ай бұрын

how much are you guys getting out? on pos4 i only got 2.5L

@YepThatsIt 11 ай бұрын

hi, rewatch the vid. cheers

@sawekkosut795 Жыл бұрын

Have you changed the oil in the wandler

@YepThatsIt Жыл бұрын

hi, i am assuming a wandler is a torque converter ? no, the fluid in torque converter wasnt changed. we only flush as much fluid out of trans when fluid has coolant in it. doing a normal pan drop is sufficient to boost the fluid properties. if the fluid is very burnt and contaminated then a full flush usually makes trans worse because contaminated fluid is usually thicker than new clean fluid, so if you have internal wear and pressure leaks, thinner new fluid will leak through those locations much easier. on these transmissions a hot flush is usually done to clean out the thermal valve that is in cooling line. the only way to flush a torque converter is to cut it open. if you know the operation of a torque converter you will know alot of heat and high flow pass through it anyway. cheers

@sawekkosut795 Жыл бұрын

thank you for the answer, I have not had contact with such a transmission. this is my private car and I wonder if the replacement is exactly the same as the 7g tronic. some say you must have a service program with an oil level check function.

@agondokusumo-111 Жыл бұрын

Did you replace the bolts when changing the filter/pan?

@YepThatsIt Жыл бұрын

hi, no we dont unless bolts are damaged or insisted by owner. cheers

@agondokusumo-111 Жыл бұрын

@@YepThatsIt Thanks. Where did you get the transmission filter from? Was that the Vaico 725.0 transmission filter?

@kosta16auto 8 ай бұрын

@@YepThatsIt, but those are torque-to-yield bolts (4nm + 90 degrees), and they have been stretched already on the first time this pan was installed. And if you apply the same procedure, then the risk of breaking them is high. I had cases where I simply didn't have the bolts, but I would then tighten them by feel and not carry the 90-degree procedure.

@dennisdewald6729 6 ай бұрын

Why didn't you drain toque converter?

@YepThatsIt 6 ай бұрын

hi, i seem to get this same question regularly ! typically hydraulics is not same as engine or gearbox/differential/transfer case service. we only ever do a complete flush if coolant/water has entered transmission, owner specifically requests complete flush or incorrect fluid has somehow been added. generally by replacing with fresh fluid with what comes out of transmission, is adequate to re-boost oil qualities/properties. but however having said that, we also like to use lubegard products to help enhance the fluid properties. it is more beneficial to do a regular transmission filter service ( not just a fluid drop ) add extra magnets and to also bypass the heat exchanger or radiator to eliminate chance of coolant entering trans and to help keep fluid cooler, this helps to retain the fluid properties longer as it breaks down with heat. choice is yours cheers

@bengleckl1877 Жыл бұрын

I'm confused bc then u say number 1 will trickle out but thought 1 was for adding?

@YepThatsIt Жыл бұрын

hi, is a bit confusing, but will all make sense once you start doing it. cheers

@anon8613 Жыл бұрын

I took off the plug and realized I don't have the tool should I be fine to drive home?

@YepThatsIt Жыл бұрын

hi, low fluid level is not good. cheers

@anon8613 Жыл бұрын

@@YepThatsIt well i made it home jus fine it was like 1/2 qt low, so not bad at all

@bengleckl1877 Жыл бұрын

I have a 22 frontier and want to do the transmission change myself .to save money but also I don't trust dealers to actually do the job right .they use non OEM fluids ,I've had bolts loose after having repairs,they've scratched and chipped my rims like they didn't care about my vehicle so I really need to learn how to do this cheaply and by myself .I am assuming the tools are the same for the Nissan and Mercedes when it comes to transmissions change tools

@YepThatsIt Жыл бұрын

hi, if tools fit then use them. often the tool behind the tool is the most useful. cheers

@stevelash5821 Жыл бұрын

Have you done this on your Frontier yet? I'm acquiring tools, parts, and oil now to do mine. I have 103k mi already.

@bengleckl1877 Жыл бұрын

@@stevelash5821 no. I had to get the parking pawl recall done and hoped they would change it then but they didn't .they actually did something weird bc my tranny started chirping after every gear selection after they did the recall .so with that ,the fact that the dealership always did half assed work everytime I went there,damaged my brand new rims,left sensors unplugged,and bc I have the rough idle issue I traded it in on a newer ram 1500 and couldn't be happier ...great little truck but my dealership was horrible and I wasn't gonna drive hrs away to a diff dealership I already did that with my Toyota and wasted all my vacation time doing so and they still didn't fix the issue so I don't do that anymore

@tonton4818 Жыл бұрын

Hey buddy, how about 3-4 liters in torque converter? Not changing 50% of the oil is really bad job.

@YepThatsIt Жыл бұрын

hi, in an auto transmission the fluid is there mainly for lubrication and hydraulic purposes. this is why you buy transmission oil, but once its in the transmission it becomes fluid. trans fluid is not like engine oil, whereas it also acts like a filter and needs more frequent changing. we only do a full flush/fluid change when coolant or water has entered the transmission. however we have done job/tests and found, that to effectively change all the fluid properly and completely, you will need to do it 4 or 5 or more times. thats alot of oil ! you can check our other vids related to your statement kzfaq.info/get/bejne/Z9aRpJiDx8-4foU.html & kzfaq.info/get/bejne/jMulaMtmyty4mY0.html if there are no issues and you are doing just a trans service, it is more important to clean the pan and magnets ( add magnets as well ) and replace filter/s, just replacing the fluid that comes out is generally enough to boost the fluids required properties ( we also recommend to add lubegard products )....many people compare transmission service to an engine service, and many will just do an oil drain without removing and cleaning the magnets and filter service, if the trans pan has a drain plug. choice is yours ! we will do whatever the customer decides when they are explained the options. cheers

@kosta16auto 8 ай бұрын

nowadays torque converters don't hold 3-4 liters anymore. This specific model will be able to drain about 500ml-600ml.

@alinemotorcare8903 3 ай бұрын

@@kosta16auto pretty sure the TC on these Mercedes hold 4-5L as the quoted capacity of the transmission is 10L!

@SP-ww8hv 6 ай бұрын

Hmm.. was gonna do the trans drop myself since I’m at 120k (and out of warranty) I like my transmission too much to subject it to my devil may care mechanic style

@YepThatsIt 5 ай бұрын

no worries, thanks & cheers

@imagineworksgreat Жыл бұрын

Great video, however, you can tell MB that they can simplify the process, this would really help their dealership mechanics. They can service more cars in a day, month and year globally. Make all of the fluid changes simple and easy like the Japanese.

@YepThatsIt Жыл бұрын

they don`t listen to me...thanks & cheers

@johnfelstead1213 Жыл бұрын

What’s wrong with a dipstick ?

@YepThatsIt Жыл бұрын

haha its called technology. cheers

@Tyler-ti9hn 10 ай бұрын

Auto manufacturers complicate everything

@YepThatsIt 9 ай бұрын

i don`t think they ever think about future repairs. cheers

@Pufulets 3 ай бұрын

People don't follow this video, you risk damaging your transmission. This mecanic fails to show key steps of the procedure!

@alinemotorcare8903 3 ай бұрын

hi which key steps are you referring to?

@AmRFuKYaH 3 ай бұрын

@@alinemotorcare8903 in the Sentry software to check the level without an ultrasonic gauge, you have to bleed the 5 valves in the trans with the software, then get the car between 2800-3500 rpm for 2 second in neutral, then idle rpm, then around 1200 rpm is when you do the measurement with the key, the software will automatically set the RPMs for the last part.

@YepThatsIt 2 ай бұрын

hi, no worries, cheers

@YepThatsIt 2 ай бұрын

wow !

@statusquoreject Жыл бұрын

You’re supposed to cycle though the different gears (PRNDL) at operating temp and then check the oil level, why did you not perform that part of the process? Skipping it means you didn’t cycle the trans fluid through the valve bodies and thus the trans fluid level could be off.

@YepThatsIt Жыл бұрын

hi, just because may have not recorded doesnt mean wasnt done. cheers

@statusquoreject Жыл бұрын

@@YepThatsIt it would’ve have been helpful to see it done. Thats an integral step and people who are doing the service on their own would’ve benefited by having some instruction on how it do it, at the very least it should’ve been mentioned that it’s a necessary step.