2016 GLC300 9G-TRONIC Transmission Service | GLC300 Transmission Fluid and Filter Replacement

Рет қаралды 5,619

9 ай бұрын

This video will show you how I service the transmission, replacing the filters (filters are built onto the transmission pan). The transmission fluid and the filter cost me less than $100. You will save thousands of dollars by doing this yourself vs taking it to the Mercedes dealership.

Пікірлер: 29

@Red_One. 4 ай бұрын

Thanks. I m from Brazil 🤜🏼🤛🏼. Really helps

@MrBeeHS 4 ай бұрын

You are very welcome my friend 🙏

@tommylzllzz4295 7 күн бұрын

Good job man 👨👏👏👍👍🫡🙏

@MrBeeHS 7 күн бұрын

Thank you so much, my friend 🙏

@freeworld848 5 ай бұрын

That’s a minimum of a $1,000 job at the dealership. Thanks for sharing!

@MrBeeHS 5 ай бұрын

You're very welcome my friend 🙏, Thank you for watching my video. I really do appreciate it.

@philipsung4107 4 ай бұрын

Before pandemic, stealership wanted over 2k for S class with 9G

@MrBeeHS 4 ай бұрын

@philipsung4107 yes definitely! 100% true

@ToolsSNAPON 4 ай бұрын

Dealership charge complete job $1299

@MrBeeHS 4 ай бұрын

Wow! That's insane expensive!

@saahill1000 13 күн бұрын

bonjour merci pour la video 'ai des accoups apres la vidange de ma glc 2204matic avant la vidange tout se passait bien merci

@MrBeeHS 13 күн бұрын

You're very welcome my friend 🙏

@SammyS1836 26 күн бұрын

Hey! Thanks for the video! Really appreciated. Just have a few questions. 1) In the video it seams as if you only used 5 quarts, I believe the kit comes with 10? Why is that? 2) What about the rear differential? Or the Torque Converter? Don’t we need to drain and refill them as well while doing this process? 3) From my understanding during the process once we fill the oil we need to switch the cap to position 2 so it leaks out the overfill if any, and we also need to do so after running the car so the transmission temperature is settled, I see you didn’t do any of that. So it’s not really necessary? Thanks 🙏🏼

@MrBeeHS 26 күн бұрын

Yes, you are correct! I use only 5 quarts or the total amount that was drained. The rest are in the torque converter. The kit comes with 10 qts, but you don't have to drain it in the torque converter. You can definitely drain and fill the rear differential as well. It's up to you. The last one... you can do that as well. I know that I didn't do it because it's not necessary, in my opinion. This was my third service on this GLC300....the car belongs to my wife since it was on the showroom floor in 2016 and has never been to Mercedes dealership accept my shop...(my garage) 😄 I hope this help and I appreciate for watching my video.

@SammyS1836 25 күн бұрын

@@MrBeeHS appreciate your help and input! Thank you 🙂🙏🏼 Has there been any improvement in shifting? Or wifey doesn’t notice she just sees it drives lol 😆

@MrBeeHS 25 күн бұрын

You're very welcome 😊🙏 I test drove it after I did the service, and it drives just like the first day that we took it out from the showroom floor at the Mercedes dealership. 😊 Now, just take your time on it, and please do not rush to get the service done and always double check your work. 😊

@MrBeeHS 8 ай бұрын

*CORRECTION: POSITION 1 IS FOR FILLING AND POSITION 4 IS FOR DRAINING BUT YOU CAN ALSO USE POSITION 4 TO FILL THE FLUID AS WELL. *IT'S NOT RECOMMENDED TO OIL THE RUBBER GASKET BECAUSE IT MIGHT CAUSE THE TRANSMISSION FLUID TO LEAK OUT. SINCE I LIGHTLY COATED THE RUBBER SEAL AND SNUG TIGHT THE BOLTS, IT'S ALL WORKED OUT AND NO LEAK.

@user-zm9xs1bm7h 8 ай бұрын

Correction: Number 1 position is for filling, number 4 for draining, number 3 for setting fill level once transmission is at operating temperature. Also, critical mistake here, DO NOT PUT OIL ON EDGE PAN SEAL. This needs to be dry or you will get a leak.

@MrBeeHS 8 ай бұрын

Thank you for catching that. 👍 I really appreciate it.

@user-rf1po7vw5t 4 ай бұрын

So who’s right?

@MrBeeHS 4 ай бұрын

@user-rf1po7vw5t he's right.....1 is for filling and 4 for draining. In the video, I use 4 as for draining and filling. By the way....you can use 4 for filling also. That's what I did. The proper way is position 1 filling and 4 for draining.

@ligang7301 2 ай бұрын

could be more helpful if post the item list used in the video. Thanks anyway!

@MrBeeHS 2 ай бұрын

I appreciate your input...I definitely will do that.

@Yeagerx2012 10 күн бұрын

Dealer wants $1300 for service

@MrBeeHS 10 күн бұрын

Yep! That's correct! Way cheaper to DIY.

@Wilhelm0125 14 күн бұрын

Das ist Unprofessionell

@MrBeeHS 14 күн бұрын

It's DIY my friend and save you more money than getting ripped off from the dealership. You need to be smarter than the dealership my friend. Work smarter