Is it just me or every time I watch one of these videos I have the sensation to go spend money on my own truck ? Haha , got to love that diesel fever .

Well that does it, I'm pulling the trigger on my 14, good bye VGT. Thanks for all the info and showing how this thing drives on stock fuel... really clears up any doubt for the lot of us on the fence about which charger to spend the money on....

Man I love your videos. You are not only a good KZfaqr but your explanation and the feed back you give is just awesome.

def a thumbs up for me... just based on the 2nd gen swap explanation as well as detailed descriptions. I don't know much about newer dodges. so the descriptions and explanations on everything is awesome. take note video makers, this guy is good. BTW, NICE TRUCK.

bro u are like the gods when it comes to dodge cummins trucks keep up the great vid like always

I’m very impressed how quick it spins. Fuel n injectors on a 5.9 should push some numbers I’d think 🤔. I was set on a 362 til I watched this video again 🤦‍♂️.

that sound gave me wood

5.9=Life.

That engine looks so sick. I just bought a 2015 3500 cummins short bed I absolutley love it can't wait to start messing around with it. Great truck.

I've been wanting to do a 2ns gen swap so bad. Just costs money, lol. Keep up the excellent quality my friend!!

I wish my daily spooled up like a built cummins motor...

I have a 2008 6.7 mega, I swapped for a nv5600 out of a 01 24v, bigger input, because I blew the 68. Everything is great, but I'm pretty sure I blew the HG. So doing all that with 625s, I had 425s, but going 625s, and 110# valve springs and rods. I am wanting to go to a 2nd gen swap, but thinking of a s366, so I can eventually compound it later in life.

I have the exact same setup but with a bd manifold 3 piece and me cruising at 70 mph I only hit about 2-3 psi I also have auto

11 hundred thousand degrees??????

Great videos man! Favorite KZfaq channel now by far keep em coming!!

I have a 2011 6.7 with 68rfe. VGT turbo is currently stuck open... is has around 160 thousand miles or 274 thousand km’s. I spoke to my tuner and he said that fixed vain turbos don’t pull nearly as well and (you lose low end power ) is basically what I understood. He also said the VGT turbo is better for tuning purposes because it constantly spools the turbo up faster. I’m currently deleted with 5” straight pipe , I have studs I just need to put them in. and I do not want another turbo failure. Not to mention the VGT stock holset turbo new from bd is like 2500$ and the 2nd Gen swap is around the same price. I mainly daily the truck and pull light stuff ( under 10 thousand pounds ) I’m considering a BD s463 or s461 2nd Gen swap because my family’s shop is a BD dealer. I’m still trying to decide what to do. I really like the sound of a 2nd Gen swap and if it works for Greg A and he pulls 15k with a s467.7 it should be good enough for me.

i either want the s400 or the 4094 in my LBZ i like the vanes thou for towing there great for braking but i like the price of s400 ive never had any problems with my vanes on my stock turbo an its sounds sick when ur at a stop light an they adjust

Sweet truck, I bought a low mileage 2008 2500 6.7l 6 speed this summer. First diesel truck, I notice it had a lot of turbo lag especially when shifting with a load. My friend has a 2006 5.9L 6 speed and it has zero to no lag, both trucks 100% stock. I don't know which tuner to purchase for the deletes and what not, but I need to do something.

Will that 6.7 fit in my fiat?

do a video like this about the triple turbos on the 6.4 I'd like to learn more about that set up

What A/R is the turbine housing on this setup? would having an automatic trans make any difference to the way it preforms? looking doing this to my 2012 limited 3500 dually. Thanks!

Hella sick tryck

You're killing it with the videos man! Excellent quality. I wanted to confirming stock fuel as in no aftermarket fuel pump either, correct? Real nice truck! Also that truck an auto trans?

Are we talking source automotive like up here in clackamas?

Got the p2262 code and took my turbo apart to clean noticed when I went to put it back together the veins we're bent and sticking. put a new vein in it and the code went away for 5k miles and now the code is back.. thinking about just doing a second gen turbo.. p2262 is really pissing me off!

ive got a friend who bought a 3rd gen 2 months ago and this things is dumb fast. its a 6spd ccsb its got a dyno proven 980hp. my buddy so scared of getting into it he hasnt taken it out of economy and thats at 650hp. but hes on a stock bottom end still

I have the same set up on my truck and absolutely love it. I couldn't have described Borg Warner any better. I have been nothing but pleased with how much truck runs with this set up. Have you dynoed this truck to see what it is putting down?

What type of brackets do you have on your gauges, the ones on the side of your pillar? Really like the way that looks.

More of this content my man!

Clean dirty diesel 👌🏻

I'm wanting to go with pretty much the same turbo set up you are running but I'm worried about the steed speed manifold giving me figment issues with the down pipe, hot pipe, and shock tower. Did you have any problems with yours? And great videos sir keep them coming

when you put that turbo what happens to the wires that connect to the stock turbo

Where are you monitoring the boost pressure from? Love the trucks keep up the vids

Hey thanks for all the information. I know you said your truck is completely stock aside from what you mentioned in the video. how much boost do you feel comfortable running on stock head bolts?

What is the gear ratio on this truck?

GeegA I miss the 08

awesome video awesome truck keep the videos coming

Personally I feel that going away from a Vgt turbo is a step backwards doing these swaps. A vgt offers so much more in adjustability, engine braking and superior spool up

Hey Greg, was wondering whats your complete gauge setup? i know you use isspro but what all do you monitor, and what did you use to mount them i noticed in a more recent video you have some on the pillar as well as on the steering column. looked like a good set up but didn't look like a kit more like something you put together. something you seem to be great at. Thinking about ordering some gauges for my truck just doing my research first. Thanks!

I have a 2012 6.7 cummins. I sadly have a 68 RFE tranny. that doesn't feel the strongest now do you think it would give me transmission problems. I don't beat my truck it cost to much to fix but if I put this in my truck would it give it to much power for a stock automatic transmission. I have EFI live already but everythings stock on it.

That's quick boost!! What elevation are you at? We're at 6000ft, feels like every turbo is slow spooling!!

how do you feel about fleece performance 2nd gen swap with their turbo. or should I work towards their 2nd gen swap with the good ol borg

why would you put the oil feed on that side so it's sitting on the manifold move it to the other side away from it

great video man. same set up I planned for my truck. have you dynod this truck yet?

Hey man love your channel. Could you do a video comparing your opinions on the nv5600 vs the g56. I am planning on replacing my 02 single wheel 2wd auto soon. I want efi live but can only get it with the g56 and have heard a lot of bad things about it. Figured with your pulling experience you would be a good person to ask. Thanks in advance for any and all help.

What's your opinion difference between the fleece 67, borgwarner 67, and the bullseye 68 batmo turbo all s400 frames

Greg what hot side A/R are you using with this application

So now that you have experience with the fleece cheetah in the 2018. Which turbo do you prefer?

The HE351VGT on the 6.7 does not have "vanes". They have a variable nozzle which is just one moving piece. This makes it better than the Garret vane type in Fords and VW's that have dozens of moving parts.

How is it for surge? Any specific RPM and boost that has nasty surge? I've been running a S366/74 and the compressor surge between 1600 and 2000rpm at around 15-20psi is so bad that I'm done and changing chargers.

My 96 12v with a 64/74/14 pushes 60 psi and the egt's are at about 1300 to 1400 and that kinda scares me......truck was dynoed at 500 whp so it can handle the boost but idk about the temps

Something about the sound of a Cummins. Gives me wood!

.90 exhaust housing? would you recommend a .90 or a 1.0 housing for a stock fuel 6.7?

Hey Greg, I'm need some traction bars for my 2012 and like the way the setup looks on your tow pig. My 12 is a mega cab so long bed frame and didn't know if you could share what setup you are running on here? Thanks and keep up the videos!

I only see 30 psi max boost on a 2010 cab and chassis (yes still a third gen) with full deletes and h&s mini maxx on wild tune should i see higher boost? Stock besides deletes and mini maxx

Was it laggy or feel under powered with stock fuel? I can get a hell of a deal on a 467/67 full 2nd gen swap, I’ve already got custom tuning and an air dog fuel system and just put a brand new transmission in... but running this setup on stock fuel makes me a little ehhh...? What’s your opinion man...?

Im lookin to 2nd gen swap my 16 megacab soon im on the fence between an s464, s467, or the sxe369fmw kit. Whats your opinion ? Truck is a g56 and ill be doing efi live with possible 75-90 hp nozzles eventually. Oh and i should say i want a turbo with a loud whistle haha Thx

What is the a/r on this turbo

What do you think about a '92 12v stock h1c spooling to 30psi with stock fuel system?

How did the turbo swap affect mpg(city/highway)? My stock 6.7 mega-cab would get about 15-16 city and 21-23mpg highway(Unloaded). Also I have the 68rfe auto. Thanks. Awesome truck Btw.

How much psi can a 6.7 take before head studs should be put in ?

Greg, great videos. I love my 5.9 Cummins. Air Dog 150, 4" straight pipe Smarty Jr. Is there anything else I can do to get better mileage? I baby it and get 16mpg, its a 4X4, 6" lift. So I know that's hurting it. Fresh air intake? Better turbo? What do you recommend? Thanks, Matt

Will a second gen swap give you better fuel mileage than a stock VGT?

Greg! I bout a an s467.7 for my 6.7 and I have plans to do the fuel system. But for now would you say it’s worth the extra money for the arp 625’s or will I be okay with 425’s!?

so basically a 2ed gen swap in this is just the manifold and intake correct not literally swapping engines

Do you think this Charger would work well with a 12 valve? It is a 97 5-speed, so 215 ppump, fuel plate pulled, 4k gsk, AFC done for no fuel plate, I can't remember if the timing was advanced. All the mods were done to the truck by a diesel shop before I purchased the truck. Doing head studs right now, do you think with some bigger injectors and some tinkering it could light this charger efficiently and give me room to grow?.. Or would you suggest a S363?

If you don't mind sharing, what did a setup like this cost you?

I noticed you still have the factory clutch fan in your tow truck...whats your opinion about the aftermarket Electric fans?

Where did you get your crank case cover

Any experience with the 369sxe. Trying to decide between that and the 467. What would you recommend for stock fuel. Im guessing your running it with the 83/.9 housing. I basically have same truck except 2010.

Is the s300 a good kit? Not a lot of towing done

Did you keep your CCV Filter? How do you get rid of the perform service message on your over head display? If you kept it how do you keep the suction without it plumbed into your intake?

Where can I get the list of parts and materials?

GORDON!! ALWAYS

Who does your Powder-coating?

Is the turbo or the manifold gated? Nice build man!!!

@GREG_ALBERALLA where does your ccv run to and how is it setup?

What exhaust housing is on this? Sorry if i missed it.

how come it seems like most people leave the clutch fan on instead of going with a electric fan for cooling

What colour powder coat is that ?

What do you do for an exhaust brake?

What kind of fuel millage are you getting

How did you get the coolant up pipe that would normally go into the EGR cooler out of the way of the manifold? Did you just take it out or reroute it somehow?

hey question. you said on complity stock truck does that mean head studs as well?? i have two trucks i have and 1994 12v with my egts way to high. and an 03 6speed thats my tow rig thats complity stock other then cold air and smarty so6. could i run say that size turbo on stock head studs?

Hey man I’m trying to build a 5.9 Cummins 24v tow rig if I could ask you some questions and get insight that’d help. I’m new to the diesel game

Really liking your channel. Subbed for more. Is it smokey? If so, maybe include boost/smoke clips simultaneously in the future. That would be cool.

What are your opinions on 2003 cummins? What about time and money for a 5.9 to a 6.7 swap? I really like your trucks! I'm looking for one myself

What size tires and rear axle ratio?

We're did you find those others gauge mounts you have mounted on the side of the pillar?

I bought the exact same kit from source Does 67 exducer by 86 turbine sound right?

Are you able to put that 50 pounds of boost in without headstuds or do you happen to have that truck studded? new to your channel. thanks!

GREG_ALBERALLA. Where did you source the turbo and did you go with the 83 or 87 exhaust wheel?

Manual trans ?

Do you recommend the motor be studded when using that setup?

What is the a/r size on this turbo and is it laggy

Hey what mount is this for the gauge?

What is the horsepower I have a 6.7 that is pretty much your exact set up besides turbo. I want the s467 but wondering what power your making and what are the specs on turbo?

Thought you had a triple turbo truck!?

do you have the truck studed?

Have you shimmed the relief valve on fuel rail or added a plug? Keep up the great videos!