Hopefully have this setup on my ride in a month or so!!! Super sweet tow rig!!
@koreymcfarland87374 жыл бұрын
That's a nice set up.
@ahillbillyredneck23758 жыл бұрын
great video thanks!
@kafoure938 жыл бұрын
you should blip the throttle on your down shifts to rev match. It doesnt look like you are in the video. It hard on the drive train if you don't. I like the set up though. look and sounds clean. Thanks for the video/
@BrandonBigB9568 ай бұрын
Love the sound and would love to drive one to see how it feels vs the VGT and the low end torque they are capable of making. My 2012 Ram Cummins never really shifts above 2500 no matter how heavy I am running and that drops me right back down around 16-1700 rpms.
@27dtrost9 жыл бұрын
I still love this setup after 2 months! It's a towing machine! I see about 14 mpg's around town and 18 highway. When I'm towing heavy I get around 11 mpg's. It does smoke a little if I lug the engine hard below 1500 rpm's. In normal driving and towing I see no smoke.
@ZSharkPH7 жыл бұрын
Looks like a great combo for towing. Congrats on a nice pulling Rig.
@tgillilz716 жыл бұрын
27dtrost love your setup man! Be doing mine here in a week or so with a s366sxe. Very similar setup as yours same nozzles and tuning. Thanks for sharing!
@100pyatt6 жыл бұрын
Nice looking setup !! i would've twinned over the stock VGT and Re-Mapped the vanes, to drop the drive pressure under load and remapped to increase the power of the exhaust brake.. Stock vgt mapping sucks
@EZkill55 жыл бұрын
Right Wing You’re a tool.
@27dtrost9 жыл бұрын
Nope no smoke unless u lug it super hard!
@hollnagelc9 жыл бұрын
About to put a 464 on mine. Stock fuel though. Whose kit did you go with?
@Losman6664 жыл бұрын
Goals❤🖤❤
@dixiemae50425 жыл бұрын
Nice setup. Like to swap my aisin for an Eaton 10 speed. Maybe lol
@holybuba9 жыл бұрын
I am wanting to go with this set up on my truck..does it smoke much? I don't want a coal roller just a tow rig
@andersonwelding37448 жыл бұрын
Who's kit for s464 did your mechanic go with?
@sethnielsen46307 жыл бұрын
Sweet truck but some of the comments crack me up if you watch the video he says 100hp injectors and you can definitely see the egr is gone the is a big ass turbo right where is supposed to be lol
@joshgarvens87433 жыл бұрын
what second gen swap kit and tuning did you go with?
@12vgen154 жыл бұрын
Is that turbo laggy at all? I’m considering it for towing
@devon22649 жыл бұрын
What gear ratio does your truck have?
@Thesongstaysthesame7 жыл бұрын
great video! very insightful! have you tried to tow any heavier loads since and if yes how were the EGT's? Cheers
@27dtrost7 жыл бұрын
bigair845 no that's about the heaviest load I pulled. I just sold that truck last month.
@lornelovelace82177 жыл бұрын
That is a nice setup. Very impressive. who makes the turbo
@27dtrost7 жыл бұрын
Lorne Lovelace borg warner
@JakeAshcraft7 жыл бұрын
Egt is low! Holy mackerels
@tuckerschwab53316 жыл бұрын
How much hp and torque
@robwalters96959 жыл бұрын
Looking at upgrading from my 5.9 to a 6.7, how do you like this setup now that it's been a little while? How are MPG with that set up loaded and unloaded?
@Kallaus_built4 жыл бұрын
That's how I want my brake. I don't want it to work off the factory switch. Which kit did you get to do that?
@27dtrost4 жыл бұрын
It wasn't a kit. My mechanic put it together.
@redpoole93237 жыл бұрын
also did u change the Fluid in the G56. I was thinking about Gorila Juice.
@redpoole93237 жыл бұрын
27dtrost thanks man. I was gonna get Fluids changed next week. I will Wait. I'm gonna do the s464 and 2nd gen Mani. I will have to purchase an exhaust brake. sure is nice when Towing.
@redpoole93237 жыл бұрын
Hey bud I have a 2014 with EGO live and GDP intake horn 5 in Strait Pipe and down pipe. I have a South Bend 3250. Did your clutch affect your Shifting???. Mine sure did and I have to keep RPMs up also because of gear. Noise. My biggest question is about the Shifting.
@27dtrost7 жыл бұрын
Red Poole gear nose is normal and yes it's a little harder to shift
@redpoole93237 жыл бұрын
27dtrost thanks buddy
@k-ris19218 жыл бұрын
How is your BD Exhaust brake mounted in the downpipe. Is it welded or V band?
@27dtrost8 жыл бұрын
vband
@27dtrost9 жыл бұрын
I didn't use a kit. My mechanic did it all custom.
@dayuiz5 жыл бұрын
27dtrost who is your mechanic? I’m over by Quantico and I’m still looking for a good shop that’s not 3+ hours away
@27dtrost8 жыл бұрын
I have ARP 425 head studs
@dylankamp48992 жыл бұрын
Do you happen to still have the truck how is the set up working now that it’s been 6 years. I’m looking at the same set up only difference is I have the automatic trans
@27dtrost2 жыл бұрын
I don't. I sold it in '17
@dylankamp48992 жыл бұрын
I appreciate the reply I was also curious did you need to retune the truck after the second gen swap?
@27dtrost2 жыл бұрын
Yes I did. Got tuning from PPEI. They don't do that kind of stuff anymore because the EPA shut them down
@k-ris19218 жыл бұрын
Whats all done to your cummins? motor wise.
@27dtrost8 жыл бұрын
60% over nozzles, ARP head studs, 464 turbo, heavy duty springs, fuelab 100 lift pump, EFILIVE, etc
@27dtrost8 жыл бұрын
V Band
@FSHFORLIFE3 жыл бұрын
Sweet truck. Try a rev match on a down shift though .. your driveline will thank you
@lawnsmithslawnlandscaping32228 жыл бұрын
What size nozzles do you have ? Could you tell any difference with the nozzles
@27dtrost8 жыл бұрын
100hp nozzles. yes I can definitely tell a difference. you need them to spin a bigger turbo
@Ajdruck7 жыл бұрын
what clutch do you have from south bend (part number or friction material type)? and does it engage similar to stock?
@Claymar5045 жыл бұрын
Y'know instead of putting a piece of cardboard on the grill under the rear driver side seat is a grill cover from stock that looks a lot nicer than the cardboard. Just letting you know!
@ni9hmarez8 жыл бұрын
do you have a egr dpf delete on there
@27dtrost8 жыл бұрын
yes I do
@lukeyna18 жыл бұрын
What is the a/r on that turbo?
@27dtrost8 жыл бұрын
.9
@krayzyr13 ай бұрын
What’s a safe get level on these trucks I have a 2010 6.7 aswell
@27dtrost3 ай бұрын
500hp
@krayzyr13 ай бұрын
@@27dtrost I’m sorry meant to put egts spell check corrected it
@27dtrost3 ай бұрын
@@krayzyr1 900 to 1000
@hankrotering69617 жыл бұрын
so if I heard your video correct that bottom gauge was boost why was it reading so ungodly high
@27dtrost7 жыл бұрын
Hank Rotering, I don't consider 25psi ungodly high
@hankrotering69617 жыл бұрын
27dtrost oh I must of read it wrong it looked like it was blowing way past 100 psi at some times. love the set up!
@hankrotering69617 жыл бұрын
my quality was bad didn't see that decimal hehe
@canadian50957 жыл бұрын
psi is not everything. it's moving more volume of air with that set up
@gfoster93426 жыл бұрын
Right?? I saw that and was like, "JEEEEEEZZUSSSS how's the head staying on that thing??"...Now I feel dumb.
@denyboy1511 ай бұрын
Tell me more about that bd brake. Is it not the turbo?
@27dtrost11 ай бұрын
No, it's a butterfly valve that goes on the exhaust. Totally separate from the turbo
@denyboy1511 ай бұрын
@@27dtrost have a link for one? I would love some sort of exhaust brake since my new truck is built with a fixed blade turbo.
I don't want to have boost over 60psi and blow up. Everything on my truck is fully deleted and I have a H&S MM
@dr.bowdoin30673 жыл бұрын
You won’t get 60 psi out of this set up
@DC89SSP18 жыл бұрын
You have head studs?
@27dtrost8 жыл бұрын
he got it from Industrial Injection
@k-ris19218 жыл бұрын
How much boost you building with no wastegate?
@27dtrost8 жыл бұрын
on my Edge insight gauge which only reads to 40 psi I've maces it out. boost its just a measure of restriction though. since I've removed most of the restrictions my boost won't be as high as most guys but I'm flowing way more air