A $2500 Custom Rock Bouncer You CAN'T Build!

Рет қаралды 79,030

2 жыл бұрын

This Axial Ryft would cost you around £2000 ($2500) to build, but you can't! Custom built by GCRC, the UK Treal dealer, using an exclusive 'Green' that is not available to buy! And a crazy 1100oz Reefs 1100 Smart Servo!
GCRC Ebay: www.ebay.co.uk/str/garethcurt...
GCRC Facebook: / 823351788552925
Tomley RC Merch: tomleyrc.com/
If you Disliked this video because you Dislike me... Click Here: www.banggood.com/Bubble-Essen...
My Amazon RC Favourites: www.amazon.co.uk/shop/tomleyrc
If you enjoy the content please consider Supporting by Buying me a Coffee:
www.buymeacoffee.com/TomleyRC
Copyright Free Music:
www.epidemicsound.com/referra...
filmstro.com/?ref=19832
My KZfaq Tool: www.tubebuddy.com/youtube000
Facebook: / tomleyrc
Instagram: / tomleyrc
Twitter: / tomleyrcgarage
Tomley RC © 2022 Tomley Media Ltd. All rights reserved. Publication, reproduction or distribution of this film by any means whatsoever - including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world - is strictly prohibited without the prior written consent of Tomley Media Ltd.

Пікірлер: 245

@withcookie5583 2 жыл бұрын

Where's your driver? 😆

@TomleyRC 2 жыл бұрын

I was waiting for this comment 🤣

@brianellison3525 2 жыл бұрын

But, I mean, where is your driver?

@withcookie5583 2 жыл бұрын

@@TomleyRC I had a feeling you'd be expecting it. Great video though. Cheers

@lashwa086 2 жыл бұрын

@@TomleyRC why don’t u get the xmaxx it’s not bad

@chadedwards5908 2 жыл бұрын

Am I the only one that seen the drive shaft fall out at the end pointing 6:00 lol great video awesome bouncer thanks Tomley! 😀

@jaysrides93 2 жыл бұрын

Haha was gonna say I know someone else had to have seen that 🤣

@bryandouglas739 2 жыл бұрын

I noticed it, I kept going back to make sure I was not imagining it

@Mr.NiceGuy80 2 жыл бұрын

Looks like something was hanging out of the bottom there at the end. Driveshaft, perhaps?

@disciplinerc 2 жыл бұрын

Right on dude, looks sharp. It's impossible to keep them looking beautiful as the first time out, the are born of fire and made to be beaten 🔥😎🤘

@teamjono69 2 жыл бұрын

Fancy meeting you here...

@aljensen7779 2 жыл бұрын

The Ryft, by design, is a go-anywhere vehicle and if I can't decide which rig to bring along, I always choose the Ryft, since it's likely to handle any terrain I put in front of it. I beefed mine up too, with GPM hardware and the rear torsion bar was the best investment. As soon as it was installed, all the torque twist disappeared. Great, fun little machine on 4s. As a crawler though, it needs a better power system in it. It's a great platform for selling Firma stuff, but you need a sensored system in it to go slowly enough for controlled climbing.

@TomleyRC 2 жыл бұрын

Yes, a sensored set up for crawling is a must. I’d not looked at Ryft prior to doing this video, and it’s certainly a decent rig!

@frankensteinsgarage9632 2 жыл бұрын

AI Jensen i found when I fitted the factory rear sway bar I started chewing diff centres out on 4s. Since then I have upgraded to Treal centres. But I have thought about going to a sensored motor. Going back to 3s, removing the rear sway bar and keeping it more as a crawler.

@aljensen7779 2 жыл бұрын

@@frankensteinsgarage9632 Idk if it makes any difference, but you said you used the factory sway bar? And the one I put in mine is a GPM. Maybe that has something to do with it? Who knows but my diffs have been alright with no noises. Also used GPM driveshafts but MAN, it's expensive ordering from them.

@frankensteinsgarage9632 2 жыл бұрын

@@aljensen7779 yeah ok. I'm still running standard drive shafts. I have once sheered a centre spline shaft for the rear drive shaft. My diffs never get noisy. One minute they are fine next minute they just strip like butter. On 3s I never have a problem. In saying that I haven't had a problem on 4s since I fitted the Treal diff spools.

@brianellison3525 2 жыл бұрын

I like that you color coded the front and back. Makes it easier to tell what way you're supposed to be going. Hah. Impressive rig. Thanks for the enthusiasm. Waiting for you to get one of the new Losi JRX2 mini's. You're the perfect one to test run that one. Be well and have fun. 😀 👍

@TomleyRC 2 жыл бұрын

I’ve seen them JRX2’s and don’t thing they are worth the money really. Not sure I’ll get one

@RACEABLE 2 жыл бұрын

even if i dont find any purpose for the rock bouncers in general , i hve to admit that this thing is a masterpiece..

@derricksazrc3411 2 жыл бұрын

That backdrop is perfect with the browns of the hills and dirt and the greens of the shrubbery to go along with the Bouncer.

@TomleyRC 2 жыл бұрын

Yes, it’s such a cool place

@RCRoads 2 жыл бұрын

Wow! Crazy awesome Rock Bouncer. It seems to take all terrain quite well and the high gear speed is impressive and its ability to take on the rocks. It seems to have plenty of go on 3s. 💫 Nice review and footage...

@dave1966red 2 жыл бұрын

WOW .... now that is one Cool 😎 👌🏼 RC rig that has clearly been built with great skill, using top quality kit and to such a unique colourway. Fully understand your nervousness at not wanting to trash it but hey the way to show its true and full potential is at controlled speed on the kind of rocky terrain you took it to. For me the way it flips, jumps and soaks up some pretty serious lumps and bumps relative to its size and scale is its greatest attraction. Well done to GCRC for creating a truly unique and beautiful RC truck. Also well done to you Phil for providing the very best showcase for it. The bench videos were awesome and showed off the quality of both the Treal componentry and GCRC's build. All in all a brilliant showcase so we could all share in this incredible RC rock bouncer in all its glory.

@TomleyRC 2 жыл бұрын

Yes, it has the very best bits and looks amazing. Just a few war scars now 😅

@albertsolbo2297 2 жыл бұрын

WAY out of my financial boundaries but WOW...I Love it....The colors are so cool on it and the performance looks awesome...Wish I could afford it cuz I'd have one lol.

@TomleyRC 2 жыл бұрын

Out of my financial boundaries as well! 😅

@timearlmountainsiderc6519 2 жыл бұрын

That thing is gorgeous. Thanks for the show and tell.

@roblowrie1969 2 жыл бұрын

Wow!! That is a work of art!! I understand your fears or scratching it!! That's everything I can't get my Axial Yeti to be!! It's got loads of expensive bits on it, but can I get the steering to work!!! 🤷🏻‍♂️

@MRMechanicRC 2 жыл бұрын

Dude that’s one insane build! All that aluminum is just crazy!

@davidhiscock1969 2 жыл бұрын

That thing is over dripping in bling. Stunning bit of kit . Phil, you needed to add the sound of an old cash register "cha ching" every time it rolled 🤣

@TomleyRC 2 жыл бұрын

Haha.. yes.. with a £- figure every time 😅

@davidhiscock1969 2 жыл бұрын

@@TomleyRC 👍 definitely. Hope you are well fella

@islandrc-duke1972 2 жыл бұрын

Wow, awesome looking RC and great run

@MrRobertshaw100 2 жыл бұрын

Thing of loveliness to look at and it went well to boot but blimey I was cringing badly every time it rolled over. 😱😱🤣 You're an animal Phil! 🤣

@smallsoundrc9678 2 жыл бұрын

What a build Gareth did looks epic 💪🏼💪🏼 and great to see you having some fun with it 👍🏼

@Art-zs6sl 2 жыл бұрын

Looks awesome. They Ryft is insanely fun. I really like how you dyed the cage, wish mine came out that great!

@TomleyRC 2 жыл бұрын

He did a good job of building it for sure 👌

@chriswhite2714 2 жыл бұрын

Wow that is awesome, scratches and scuffs always make it look better cool video Phil 👍

@cannibal666 2 жыл бұрын

I've seen a few hooked up ryfts in the past year but this is freaking awesome love the two tone scheme 💥👍

@TheflyingkiwiRC 2 жыл бұрын

I wish they came strong like that out of the box. I've never understood how manufacturers can make something so good but so flawed and continue to sell them. Great for the aftermarket upgrade companies I guess. I know out of the box with all the aluminum parts would make it expensive but stock it just won't stand up to its name as a Rock Bouncer coz the axles housings will soon break. Bummer

@frankensteinsgarage9632 2 жыл бұрын

I've got a stock one. Well apart from centre and rear diff spools, plus a 25kg steering servo. And tbh the only part that brakes and keeps breaking is/was the spider gears in the rear diff when running 4s lipo. If I run 3s I don't have a drama. And now that of got Treal diff spools the car has been almoat indestructible. I've jumped and treated it like a basher. Never had a problem with the factory plastics. Only flaw I could say is it doesn't handle well for how fast it is. And yes if you try to crawl it the motor cogs a little. I will go to a sensored motor soon. As for the handling it does make for a rewarding drive if you can drive it at high speed and keep it up right.

@rcplaytime 2 жыл бұрын

I've literally just built one of these,almost exactly 😁😁 lol😂😂 beautiful machine 😀👍👍👍😎😎

@Lee.gRC27 Ай бұрын

That does look awesome , great build GC

@ksrnate 2 жыл бұрын

It's only a one off because no one else is gonna spend 2 grand on a ryft 🤭 Anyway you broke his drive shaft at the end 😳🤣🤘🏻🤘🏻

@assjack1124 9 ай бұрын

Probably the most capable ryft out there at what could of been an epic location and dude proceeds to do donuts in the gravel. I normally try n keep my slick comments to myself but come on my guy. You just did that rig and guy who built it a disservice. It’s never too late to redeem yourself. Part 2 anyone?

@toddbertram6556 2 жыл бұрын

There is a perfect testing ground about a 1/4 mile away my man. It is sitting beautifully in the background

@MCsCreations 2 жыл бұрын

Damn! What a beautiful thing, Tomley!!! 😃 Fantastic bashing there!!! Stay safe there with your family! 🖖😊

@TomleyRC 2 жыл бұрын

Cheers dude. You too

@radiovlogi 2 жыл бұрын

Is it supposed to bounce like that or should the shock absorbers... absorb more? Or is it called a rock bouncer for a reason?

@allenfertgus354 7 ай бұрын

Loved that last flip, but rear driveshaft left the chat lol. Looks like a great build. Absolutely love it

@jz64 11 ай бұрын

That thing is bad to the bone one of the coolest Rc cars I have ever seen.. Awesome video

@marcusrcs1885 2 жыл бұрын

That's the best looking rc so far this year

@TomleyRC 2 жыл бұрын

Agree 👌

@benmochrie6520 2 жыл бұрын

Fair enough. That’s a wicked video. 👊 Respect.

@theminiatureconstructionco4556 2 жыл бұрын

Beautifully engineered. Cost more than my last two real cars combined! 👍😅👍

@TomleyRC 2 жыл бұрын

Cost 5 times one of my cars 😅

@theminiatureconstructionco4556 2 жыл бұрын

@@TomleyRC does being given a free car count? 😄

@cordite7207 2 жыл бұрын

Ive wanted one since they released but I just cant justify it. Personally, with the way I'd run it I would need the axle housings and it just adds up really fast. Really cool to see one with all the bells and whistles

@TomleyRC 2 жыл бұрын

Yes, it can soon add up!

@jameswisecarver 2 жыл бұрын

A day late and a dollar short....morning Tomley its 10:23am in Arkansas, USA!! Thanks for the vid that thing is CHOICE!!

@wheelsdownrc6348 2 жыл бұрын

Yea good on you for even getting to drive it,that’s a lot of aluminum ✌️thumbs up driving 👍

@jimhuff1534 2 жыл бұрын

Dude that is a sick looking rig!!! Love the vids!🤘✌🏼

@TomleyRC 2 жыл бұрын

Cheers Jim

@jimhuff1534 2 жыл бұрын

That’s how this machine should run.!! Tim Cameron would be proud!!!!😋🤘

@TomleyRC 2 жыл бұрын

Yes 🤟

@GARYU-S44 2 жыл бұрын

Thank you for your nice comment, my friend😆🎶👍

@bacongl 2 жыл бұрын

I would rather have an SCX6, Losi 5T or an Xmaxx for that kind of money. That being said, I am building a RYFT right now and this thing is a beast. Probably only actually need 10% of those hopups but it sure is a beautiful.

@jasonbecker4997 2 жыл бұрын

You could actually pick two of the three you listed plus batteries and be in about the same money. Kinda crazy to think about it that way.

@GazooRC 2 жыл бұрын

That’s absolutely beautiful! Great work. Love all the treal! New sub!

@TomleyRC 2 жыл бұрын

Cheers mate. Appreciate it 👌

@GazooRC 2 жыл бұрын

@@TomleyRC glad to support the channel. Love your vids. 💪🏼

@SorryIAteYourCookiesSanta 2 жыл бұрын

Cool vid! The drive shaft was out on that last clip haha

@TomleyRC 2 жыл бұрын

Yes haha. Grub screw came out

@NoLimitRC87 2 жыл бұрын

Fairplay to Gareth ive seen pics of it as he was building it but seeing it running is even better, only think I'd say is to but a sensored motor and esc in there. I must say though amazing looking and performing rig, not sure I'd trust you with it with your driving habits Phil m8 haha. You done a great video of it dude Fairplay 👏

@garethcurtis9665 2 жыл бұрын

The motor and ESC was out of a standard Ryft off a mates fully murdered out now with black Treal and metallic dark green panels. He dropped in a mamba X and a castle sensored motor (forget what kv) and he crawls his with ease but also flies it 6 foot in the air off rocks. Sensored is the way to go for sure.

@le_loui7643 2 жыл бұрын

That is a beautiful RC car, damn wish I could have something as nice as that Lol, Love your video's and I hope you never give up, I don't know if you care or appreciate it but I pray for you to make it big on youtube someday.

@TomleyRC 2 жыл бұрын

Thanks dude… really appreciate the support. I have no plans to give up anytime soon 👌

@meurigf 2 жыл бұрын

You are big on KZfaq! 100k here we come 😁

@CAPRAQUEENRC 2 жыл бұрын

That's a beautiful build

@marcusrcs1885 2 жыл бұрын

Wow that's is stunning at least it is being used if it was mine ide never take it out and keep it on my PC tower :D stunning !!!!!!!

@TomleyRC 2 жыл бұрын

Yes, I expect a lot of people would do that

@bryantgenson5339 2 жыл бұрын

Yeah I started with a 6v to 12 v tool moter . It works for crawling . Not Shure if gearing and pinion will make much difference more like more rpm and more volt.

@spudjames5038 2 жыл бұрын

That is a very awsome bouncer. But them shock def needs some tuning

@mikebird8290 2 жыл бұрын

😪 THE TRUCK 😭😂🤣LOL. AMAZING LOOKING TRUCK GREAT COMPANY. THANKS FOR SHARING PHIL 🇬🇧✌🏼🤩👍🏼

@TomleyRC 2 жыл бұрын

Cheers Mike 😎🤟

@andrewborden1009 Жыл бұрын

Nice build! Might I highly suggest watching some Busted Knuckle rock bouncer videos and install an RC4wd 4:1 Gear Reduction Unit. It is geared wayyyyyy high thus pulling realism right out of the equation :/ And add limit straps. And a sound kit.

@xod7861 2 жыл бұрын

Wow this one beautiful rift .

@speckledjim_ 2 жыл бұрын

i use this guy for my Treal gear. im currently building a Treal LMT

@TheRCBuildersPost 2 жыл бұрын

I may be the only one here, but I think that thing looks absolutely ugly lol. I prefer a clean look. I appreciate all the aluminum work done to this thing but nothing beats just a raw/polished aluminum and clean paint job to me. But, that's the joy of this hobby. Make it your own!! Nice video as always, Tomley! Cheers from Kentucky!

@Triggered-RC 2 жыл бұрын

Watching that, I'm thinking the Ryft might be a good place to start in building a custom monster truck or mega truck... Hmmmm. Might have to get one and find out.

@Livlifetaistdeth 2 жыл бұрын

Throw a sensored Castle system in there and Bob's your uncle. What a beaut!

@TomleyRC 2 жыл бұрын

Yes 👌

@gscott841 2 жыл бұрын

What kind of tires are those and are those 2.2 size treal rims

@patricklavoie8719 2 жыл бұрын

What a beauty! 😍

@S40TBS 2 жыл бұрын

😳 it's to nice to use

@Del350K4 2 жыл бұрын

That was, a cracking backflup @ 6:39!

@hubbabubba7244 2 жыл бұрын

I saw somthing hanging down at the very end of the video. Did you break it?

@mattgrandinetti8347 2 жыл бұрын

I can build that in green. Treal will anodize almost any color if you ask. So green can be done with treal.

@KathysFlog 2 жыл бұрын

Nice with a capital NICE. Think I'd like one to look at rather than drive. Maybe for my birthday 😅

@Trophy_RC 2 жыл бұрын

Cool car! Energy! ⚡️⚡️⚡️

@mrmagoo.3678 2 жыл бұрын

Not usually my kind of car tbh...but that looks tasty!..I wants one...NOW!!😈

@robhotson1882 2 жыл бұрын

Which bit is the Axial? Trigger's broom had it 20years had 3new heads and 4 new handles

@garethcurtis9665 2 жыл бұрын

I think it's gearing, shocks, tyres, shafts and some bearings. You could build another with the box of bits left.

@johnalenwork53 2 жыл бұрын

I have a red cat Everest 10 that will walk that climbing or crawling! That sure is pretty though

@johnsalt19 2 жыл бұрын

phil was that something hanging down at the rear had tp pause it to look looks like rear prop shaft

@TomleyRC 2 жыл бұрын

Yeah, lost the driveshaft grub screw and the driveshaft fell off

@johnsalt19 2 жыл бұрын

@@TomleyRC thought thats wat i saw lol

@dexterbeattie7884 2 жыл бұрын

I Love the color combo!

@TomleyRC 2 жыл бұрын

Yes. Looks good!

@ryangummerson3471 2 жыл бұрын

Was that the rear shaft I could see hanging down at the end 😂😂😂😂

@julienvoeffray1997 2 жыл бұрын

Rear shaft broken at the end... Not for bashing, not for crawling, just a tuning CNC rc car, it looks nice but worth it for the price? Nice video as always!

@RcBoneYard1 2 жыл бұрын

Sold my Ryft best day ever lol not a fan the way they flop around like fish out of water unless you get aftermarket case the 2 speed eat shift servos or bounce the drive shafts out unless have limit straps

@matthewdegroot4126 2 жыл бұрын

U broke the drive shaft.😆

@carlbModels 2 жыл бұрын

Front ARB as well as rear? I know it is has a lot of ground clearance to control, but a front ARB is going to limit low speed twist and most likely over stiffen the spring rate on single sided hits. So less flex, and worse bump absorbtion? Interesting truck though 👍🍺🇬🇧

@philtobin9510 2 жыл бұрын

Axle extenders and thinner oil in the shock and that would be a as stable as you like.

@TheReelRahim 2 жыл бұрын

CRINGE! Especially thinking of the first scratch on that underbody on that big rock when u started crawling. No shelf queens for me, but dont mean i can get used to it😅. Beautiful build. Really looks perfect on the shelf, and runs like a devil on the trails. Thanks for the great content as always mate 🤟🏽

@michaeldorich4485 2 жыл бұрын

A bouncing, bling, beast.

@GSG-lc5zm 2 жыл бұрын

Aww.. ya broke it ... I saw that lol 😂

@exgtt2061 2 жыл бұрын

I don't get it but I'm glad it exists 👍

@benfred8 2 жыл бұрын

What would be a comparable product that you are more used to? In a lower $ range.

@TomleyRC 2 жыл бұрын

Probably the FTX Ravine or Mauler

@artsvanlifeuk9967 Жыл бұрын

i think it needs a new shaft lol good ending 😃

@zacksaylor8203 2 жыл бұрын

Man that's sweet

@markmerrin1606 2 жыл бұрын

That video only your new name will be T CUT TOMLEY...👍🇬🇧😎

@ctay1071 2 жыл бұрын

Need to take it too some hills where it belongs👌🤘

@TomleyRC 2 жыл бұрын

Yes, would love to find some big steep climbs for it.

@garethcurtis9665 2 жыл бұрын

Round 2 at EAST event.

@justinjones5281 2 жыл бұрын

Favourite platform for 8-10 year olds. They love to crash roll and bounce.

@yfzguru Жыл бұрын

Would rather all steel parts to simulate actual scale power to weight, steel chassis,links,axels, I built a Timberwolf chassis added some steel plate, steel axels,links, beefed up roll cage with some steel rods and the thing was a beast with 2.2 super swampers, I set the suspension to handle the weight and it worked and reacted just like a real scale trail truck, it didn't shake and bounce like everything I see, this is cool but still not scale enough for me

@RCJunky 2 жыл бұрын

Flip it baby!

@bryantgenson5339 2 жыл бұрын

First I'll upgrade esc to 12v and use 11. V the moter won't last long but I'll have a upgrade moter . And grub pins . In myn

@bryantgenson5339 2 жыл бұрын

Custom built like I'm doing . Myn is different body it's injora brand seems good still ordering parts

@masterone436 11 ай бұрын

absolutely B E A U Tyful

@Microdose_RC 2 жыл бұрын

I love the clickbait title, literally anyone in the hobby that put their mind to it could build this. That's not saying it is not a nice truck, but custom anodizing is not like a magical process that only can be had by a few.