Here is a little DIY PVC kayak rod holder. Be sure to comment, like, and subscribe to get new videos when I have time to make something new. Also, you can find me on facebook at / diycajun
Пікірлер: 74
@laserengraver83834 ай бұрын
Great Video. Love the Cajun Music....
@allkindsofoutdooractivities2 жыл бұрын
I use the same coupler for my bridge and pier rod holders. Awesome build!
@emmaochoa1380 Жыл бұрын
Super rigid fully functional nice looking rod holders .
@chuck82282 жыл бұрын
Good idea. You can put a screw on the side some how and cut notches to turn different positions and lock in place
@donniedickerson80773 жыл бұрын
I Like This Idea, A Little Different and it works on tracks , ⭐⭐⭐⭐⭐
@CoastalTrailsOutdoors7 жыл бұрын
UPDATE: If anyone decides to try this out, you will need a washer between the pvc and the track. After tightening the bottom down a couple times I realize the track was damaging the bottom of the pvc.
@CallSignWhiplash5 жыл бұрын
Hello from Lake Charles! You should use a rectangle head brass toilet bolt. Slides right in the track like they were made for it 👍🏻
@CoastalTrailsOutdoors4 жыл бұрын
@@CallSignWhiplash Thanks might give it a try.
@AzAsrFishing Жыл бұрын
nice idea.. thanks
@ozzarks2 жыл бұрын
Nice creativity.... I think when I do this, I will do the 'cutaway' so the reel is on the bottom.
@LordByronMacintosh3 жыл бұрын
thanks very clean and easy to understand!
@jackellenberger35787 жыл бұрын
Very nice video. Quite creative!!! But a little word of caution. That white pvc material or the black abs stuff is not very UV resistant. A few years out in the direct sunlight will make it very brittle and weak. So it's quite possible a big fish could cause you a lost rod and reel. I suggest using the gray electrical pipe conduit that is formulate for outdoor commercial use. This would make a much stronger, longer lasting product. But it's your call. Best of luck to you.
@stevendomingue7 жыл бұрын
Jack Ellenberger Thanks, much appreciated.
@cris39677 жыл бұрын
How about if I paint the PVC ?? Won't that help give it more life in the sun ☀️ ??
@peterpiper_2036 жыл бұрын
They don't make wye's in electrical fittings Just use schedule 80 pvc or get CPVC But now it's turning into dollars as they are more expensive fittings So just make more then one and when you feel it getting weak toss it Just mÿ .02cents
@sf23725 жыл бұрын
Thats why he painted it champ. a year on lol. welcome to last week.
@TheJarheadEntrepreneur4 жыл бұрын
Love this idea to utilize the tracks..Definitely making these when I get my new yak soon...Keep Crushing It!! Stay HUMBLE, Stay HUNGRY, Stay FOCUSED...~The Jarhead Entrepreneur
@bigtater294 жыл бұрын
I really like ur idea and I'm gonna try a version of it. I would love to have scottys or yakattacks but funds prohibit it. I've always liked and found satisfaction in "makin it rather then buyin it" anyway. Thanks for the inspiration. :-)
@BAKERHUSKIE4 жыл бұрын
Nice job. I was thinking that using it upside down and you would have 2 positons. Then I see there is not enough space for the rod to go all the way in. Thanks for the video
@bryanbree5915 Жыл бұрын
My OCD kicked in when he didn’t center the drill bit . 😆😆🤪🤪🤪
@markhow34284 жыл бұрын
Smart. Love the idea
@bjodaddyo3 жыл бұрын
Cutting those slots is a good idea from keeping your rod from flying out. You know how those flying fish are.
@ScorpionRegent5 жыл бұрын
It is considered best practice to apply primer to both PVC pieces.
@mikey60713 жыл бұрын
this same idea with the Y PVC added with a long rod would be good for bank fishing
@everdaydetectorist5 жыл бұрын
Very helpful and inventive!
@willie93976 жыл бұрын
spray paint with a sweeping motion back and forth, short strokes great idea though
@ScorpionRegent5 жыл бұрын
Allowing each coat of paint to dry before spraying on the next will prevent runs and drips. Yes good idea.
@PEOPLENOW17 жыл бұрын
awesome; I think I'm going to do this.
@stevendomingue7 жыл бұрын
THE WAGON PIT BOYS I would like to figure out some kind of quick release.
@lancerudy99343 жыл бұрын
Very nice
@mikey60713 жыл бұрын
genius and new subscriber
@prestonsnelson37094 жыл бұрын
Man that's pretty nice! Looks legit as well. Going to modify your idea of mounting to fit my johnboat! Have you had anything in the 50,60lb range pulling on the rod holders yet?
@CoastalTrailsOutdoors4 жыл бұрын
I have not, (still trying to get that big boy). Will let you know if that happens.
@phantomshtter3 жыл бұрын
You're supposed to primer all surfaces receiving cement. What sense would it make you only primer one? Also an elevator bolt with a ground head will fit and lock it's square flanged neck within the track slot and slide within back and forth like a dream. It's funny cause I built this in my head already then hit KZfaq to see others ideas for yak rod holders realizing I already had nailed it myself. lol I absolutely love being a diy minded crafty person, can't wait to meet a yuppie yaker who blew a couple hundred on yakattack holders and show em my 4 homebrew holders for $15. LOL
@michaelpollock20335 жыл бұрын
The width of the rod opening. Is the width small enough that you have to slide the rod out from the top or is there enough space to lift the rod out of the holder.The length of the channel . Is there any advantage to extending this channel further down the receiver/pipe?Nice video - thank you
@michaelprevost12296 жыл бұрын
New sub great video thanks for the tips
@CoastalTrailsOutdoors6 жыл бұрын
Thanks
@thesonorandesertangler7 жыл бұрын
Love this
@CoastalTrailsOutdoors6 жыл бұрын
Thanks
@threecuspid7 жыл бұрын
NICE VIDEO.
@CoastalTrailsOutdoors6 жыл бұрын
Thanks
@cris39677 жыл бұрын
Awesome video!! I'm heading to the Philippines 🇵🇭 December will be there 7 months. I own a house there and looking for ways to troll and keep my poles holder. I will be video there too thanks
@jimmyceltic41206 жыл бұрын
Cool video just subbed have a good day
@CoastalTrailsOutdoors6 жыл бұрын
Thanks!
@shanekent22463 жыл бұрын
And nut like size did you use
@FishFinder6 жыл бұрын
That hail will wreck cars... I make PVC rod holders too. Take a look
@CoastalTrailsOutdoors6 жыл бұрын
I subbed your page. Thanks for sharing.
@hansg63365 жыл бұрын
Amazon rod holders are less expensive
@Javaslinger77304 жыл бұрын
I'd like to see them. I haven't seen any that mount to a rail that are as cheap as this would be to make...
@shanekent22463 жыл бұрын
How big of a bolt
@mjk61526 жыл бұрын
How much did one cost you to make?
@CoastalTrailsOutdoors6 жыл бұрын
Probably a couple bucks each. I already had everything but the glue. Locally we have a building resell store where you can buy lightly used or donated building supplies. I would check there for some PVC. Otherwise if you had to buy the PVC, paint, glue, etc. it would be out of range.
@jeredcizek50177 жыл бұрын
Where are u from
@stevendomingue7 жыл бұрын
Jered Cizek Lafayette LA
@latishajaubert56004 ай бұрын
That's kewl,, I'm from Houma ,,
@threecuspid7 жыл бұрын
SO EXPENSIVE.. TRAY THE MEXICAN WAY...VERY CHEAP.
@CoastalTrailsOutdoors6 жыл бұрын
Would love the see the "very cheap" way.
@CaptianConstruction6 жыл бұрын
Neat project! Quite creative! But "gravity" causes the rod to fall in place?! Gravity is a theory that has NEVER been, and can not be proven, or tested; could it be that the rod is just more dense than the surrounding air, so it can't be supported by the air, and just falls into place????
@CoastalTrailsOutdoors6 жыл бұрын
CaptainConstruction ha... um I guess I just guessed on that one.
@keithreding18285 жыл бұрын
@@CoastalTrailsOutdoors Not a guess. You are correct.
@mikejd13645 жыл бұрын
You wouldn't survive on a construction site if you didn't believe in gravity my friend
@get-en-buy68693 жыл бұрын
So...I wonder what shape you think the Earth is.🤣
@dirtfishingnewfoundland43535 жыл бұрын
Cheaper to buy a rod holder lol
@Javaslinger77304 жыл бұрын
Show me a link.
@SADmercenary4 жыл бұрын
Track mounted rod holders for kayaks are like $20 minimum for an average one. This is like $4-5 to make. Not sure on the logic of buying one being cheaper.
@shanekent22463 жыл бұрын
It’s the enjoy ment of making it your self
@officialWWM6 жыл бұрын
You're a good fabricator but a crap painter 😂😂
@antrigen14806 жыл бұрын
His wife on the other hand did an excellent job of painting them green!