My Dude - I know its old, and your retired and youll probably not see this, but Thanks man. Im using your tuts EVERY day.

Man - must have spent an hour in B&Ms trying to find that resin - only to come and check the video and it's Poundland! Need to listen more.

Thanks for this, after watching your demo, I successfully did my first water/river effects.

does pound shop equate to dollar store in the states?

Nice vid Luke. Glad its here for me when I get that advanced to try rivers and ponds. Thanx. :-)

Great video, Luke! This was a really great test to show us viewers! :) ~ Wolf-brother Methos

Thanks for the tip on the nail polish. Never thought of that.

Hi Luke. Loving the videos and your ideas for cutting the cost of terrain building. Regarding what you say about the bubbles in resin, I have a set of vacuum kitchen containers that come with a little vac pump. I bought the set from Betterware for about 8 quid in their sale a couple of years ago. The containers are relatively small so no good for big pieces but they are really effective at getting rid of those pesky bubbles.

Hi Luke, great video. Can you colour these with paint or pigments?

how long does it take for the trade clear casting resin to set? thanks alot, really helpful tutorial

Just found your Chanel. Loving your videos. Question: will any brand of polyester resin work? I'm in the US. Thank you for your videos.

I use fibre glass resin and the hardener on it's own fiver for big tub it it does turn pinky with the red hardener but adding a bit dark blue green paint works perfect it last ages iv had mine couple year it's a yellow tin get it in halfords or auto save any car auto parts works great kn silicone moulds too iv mad resin engine blocks and bucket seats etc the detailing it picks up everything

I've heard of people using a blowtorch for larger scale resin, to help get the bubbles out. Wonder what it is like using those little blowtorch lighters for such a smaller scale to help those bubbles release.

Great stuff, thanks for sharing

Great video! Thanks very much!

Hi Luke can the pound shop epoxy resin be painted once dry cheers Lee

You need a leaf shaker! Grab yourself a plastic jar of crushed red chili peppers when you are at the store. The kind of pepper seeds pizza shops have. The jar will have 5 to 7 holes in it that are just right for sprinkling those leave you make. :) EDIT: Use a hair dryer, or heat gun paint stripper to work the bubbles out. Or even your creme brulee gun.

+Lukes Aps Have you tried taking a heat gun (lightly) to the pound shop resin to evacuate the bubbles? Not sure how it would effect the plastic...

Is it possible to put coloured dye into it?

cfs clearcast resin does not yellow, ive used it many times for quite a few years....I dont use anything else now...

Hello. Do you think the pound resin will be good for the secret wood type project? And do you think it will go well with colouring and maybe some glow powder in as well?

if u whip loads of air into it would it give an ice effect?

I have a 1/350 scale model of the German Battleship Bismarck. I would like to find out about what to use and how tho paint an ocean scene showing it underway?

I see in the store several versions of the pound shop stuff. There are some that are slower curing and can give more play time. Is this useful to get rid of the bubbles? Or should I just extend the time by adding more acetone? I would get the trade stuff but I only need to do a little bit and don't see getting a huge tin. I also want to ask if you wanted to tinted it a little so it looks like a natural lake water that is not muddy/murky but still darker than clear, what would you use?

you can use a vacuum bath/chamber to take out the bubbles

Loved this.

Would white spirit's work to thin epoxy or is that a disaster waiting to happen?

Where did you get that leaf cutter? What is the brand/model? Thank you.

Not into arts and crafts but you got a like for the acetone tip. Should help to waterproof the rivets on my old tin boat. : )

Hi Luke, do you know if you can mix paint with the poundshop resin to colour it? Just an aside, you do know that 2 part clear casting resin is super-ninja toxic, don't you! Please read the safety sheet and wear a mask / ventilate the room whilst using it!! My favourite problem from repeated inhalation is hearing damage!! Never heard of that before [sic]....

Great comparison bro' let, me know how the experiment turns out!!! Your Buddy Ol' Pal Mr Notorious B.I.L.L.

Thanks dude , look's the shiznits !

Nice Vid Dude.

If you use some of the crackle paste on areas of a pond, could it look like cracked ice on thawing water?

Nice comparison video Luke, is it just me or does the pound stuff stink to high heaven?

HI Luke, just a thought - you can get 100% acetone from a chemists (I've picked some up from Asda pharmacy before) which might work better for thinning down the pound shop resin.

cool video

Nice iv bin looking for a cheap water effect for my armies on parade swamp board. The cheap stuff should look great for the stagnant pools of filth that my nurglings will be sat on.

The Poundland resin is really a bonding resin and not a casting resin. For bonding that matters I use Gorilla Epoxy. For sealing the ends of boards that will be used outside and not seen, the Poundland stuff is a must at a quid.

Hi Luke, just started my first project which will have a swamp in the centre. I've used expanded polystyrene for the build and was wondering if epoxy resin will dissolve it . If so what would be the best way to seal it before I pour it on ? I wouldn't want all my hard work to be destroyed. Cheers mate - keep up the good work !!

Can you pull this stuff around like the pound land stuff to create waves etc?

Did they yellow?

Any yellowing yet?

Hey man, just recently found your channel, you have any templates for those fountains?

could you use it to make ice

Pound shop=dollar store here in America???

If you get air bubbles try a hair dryer should get them out if it's like the stuff here in the states

Great video I recently poured a lake an river and I want to use some effects to bring the river alive like white water breaking of the rocks and want to do ripples in the water I would appreciate if you would take a look at my video on my channel and give any suggestions you might have. Thanks, Mike.

May I please also ask you. If you mix in more acetone, after it cures, does the volume shrink? Like does the acetone evaporate and you are left with less than you poured? Also, how do you know at what point you have added the right amount of acetone? Let's say I do not make enough and underestimate how much I needed. If I mix up another batch and pour it on to the already hardened part (perhaps even deliberately because I wanted to add some fish mid water), will it look right or will the two parts look separate? Thank you.

Just thought I'd let you guys know I tried this today and yesterday and had massive yellowing with the pound land stuff, think they have changed it 😥, just getting some clear resin instead, but the video helped a lot 😊

Just a note. When using polyester resin with mekp hardener please use gloves and a mask. The hardener is an extreme skin irritant and has other health risks associated. Follow the manufacturers instructions. And do not use any flame heat source as it IS flammable. Nice effect though.

Hey Luke love your content, great channel keep up the good work! I follow @blackforrestwoodco on insta. They do a lot of resin work and are quite informative. One of the things they do is chill their pieces once they're poured so that it cures slower giving the bubbles more time to escape hope this is of help. Also, regarding the homemade flock video, not sure if it would be cost effective but you can make your own fine saw dust with a palm sander which also captures it in a bag. I use one fairly regularly working as a carpenter and set the dust aside and mix with pva as a wood filler but am going to make some flock with it today! Cheers

"It's a pound. You get 24 grams." As an American drug dealer, I think you are living dangerously.