A Laser Engraver for Home Use? Genmitsu L8 is a GREAT MACHINE

Рет қаралды 1,955

2 ай бұрын

You often hear about Laser Engravers for business and that is a good use for one, however can you use a laser for projects around the house? I am using the Genmitsu L8 20w diode laser to build some things for use in the house. This laser engraver is enclosed in a housing right out of the box. There is no assembly so you can have this machine making things within moments. The L8 is lightburn compatible so you can build and design with the best laser software. Air assist is shipped with the laser as well as a built in camera to best position your work.
www.sainsmart.com/products/l8...
Buy a Ram Pump at the Land To House Store:
landtohousestore.com/
Ram Pumps available on AMAZON
amzn.to/2EWrQHN
Help Support land To House by Paypal:
paypal.me/landtohouse
Send Mail to Land To House:
Land To House llc
P.O. Box 323
Micaville, NC 28755
See whats coming up before it hits KZfaq on my Facebook Page:
/ landtohouse
Land To House is a participant in the Amazon Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com

Пікірлер: 21

@Hat_Uncle 23 күн бұрын

Watched your review and got one on sale. My air assist light stays red, but I verified it is getting air, not worth the hassle to deal with customer service. Pure powerhouse for what I want to do. Great Machine, thanks for the review.

@LandtoHouse 22 күн бұрын

Give the air assist light a little time and it should start working fine I am running mine as I type this and the light is green.

@BurkenProductions 12 күн бұрын

have you even tried that laser wavelength won't go thru the orange plastic? Most chinesium laser goggles and protection usually is useless and the laser pass thru them as well.

@jllaine 2 ай бұрын

That's a neat machine and some good demos, thank you. If I may offer an idea, you could hang a shelf under the bench to put the air assist pump and power brick out of the way.

@BurkenProductions 12 күн бұрын

I wonder if you can mill PCB's with this, it's like 1.6u thick copper clad hmm

@draktus 2 ай бұрын

Thanks so much for posting this video! I have been going back and forth on what to buy and for the price of this unit compared to the others I think this just sold me on it!

@LandtoHouse 2 ай бұрын

Great.I have used several of these diode machines.And this one is so easy to use. Right out of the box it hooked up to lightburn and I was cutting in no time.

@draktus 2 ай бұрын

@@LandtoHouse Could I ask you more more question? How much room above the lid do you need to open it? Thinking of putting it on a shelf and thats been one answer I cant seem to find :)

@LandtoHouse 2 ай бұрын

You will need 28" in height. And 32" depth to install the exhaust.

@draktus 2 ай бұрын

@@LandtoHouse again thanks so much!

@XavierP56 25 күн бұрын

There seems holes on the sides ? So the laser isn't fully enclosed, you can use it without protection glasses ?

@Hat_Uncle 23 күн бұрын

if you look inside, you will see the orange filter plastic the protects those openings. As long as you aren't looking Directly at it or a reflection of it, it's perfectly safe.

@maironalexandermelgarmelga6522 2 ай бұрын

Quiero una

@volvo09 2 ай бұрын

Wow, haven't been following home lasers... Didn't know you could cut 1/4 plywood at home these days.

@LandtoHouse 2 ай бұрын

Thanks.

@DominoPheonix 2 ай бұрын

you cargin your lazer?

@LandtoHouse 2 ай бұрын

Not sure what that means.

@billiverson1437 2 ай бұрын

The directions for removing the nozzle and cleaning the Lense for the L8 Laser engraver are not helpful. I cannot get the nozzle off. how does it come off? Does it screw off? A more thorough explanation of cleaning of the Lense is needed.

@belotan4218 2 ай бұрын

Turn it anticlockwise to unscrew, it may be tight but it will come off if you unscrew it.