A Light Bike Build: Trek Emonda SLR 2021

Рет қаралды 357,127

Күн бұрын

Here we go! Such a long time since I got to build up a new bike, and oh how I missed it. But those who wait for something good.... like a Lightweight Trek Emonda SLR 2021 Project One custom built bike... and it's pretty special!
Frame Video: • It's here! #newframeday
Parts Video: • No frame yet, but the ...
=== SPECIAL TOOLS USED ===
Shimano TL-BH62 Hose tool
US: amzn.to/2NepI6p
UK: amzn.to/2XIyxau
DE: amzn.to/3srapHD
CA: amzn.to/3ikbnR6
Cheaper alternative: (Not tried myself)
US: amzn.to/3qpep9B
UK: amzn.to/3sw3f4N
DE: amzn.to/3qsjAFS
CA: amzn.to/2N78uYl
Park Tool IR-1.2 Internal Cable Routing Kit
US: amzn.to/39DRY9R
DE: amzn.to/2LCOcFO
CA: amzn.to/2Lu6Yzf
Park Tool Preset Torque Driver (4Nm)
US: amzn.to/3nRtv5W
CA: amzn.to/38PeYDF
=== BUILD LIST ===
FRAME SET: Trek Emonda SLR 2021
CRANK: THM Clavicula
CHAINRING: Wolftooth dropstop 42T
PEDALS: Shimano Dura Ace DP-R9100
HANDLEBAR: THM Ulna 42cm (40 at the hoods)
STEM: Kalloy Uno 110mm (Temporary)
SHIFT/BRAKE LEVERS: Shimano Dura Ace ST-R9170
BRAKE CALIPERS: Shimano Dura Ace BR-R9170
REAR DERAILLEUR: Shimano GRX RD-RX815
CASSETTE: Shimano XTR CS-M9001 11-40t
WHEELS: Extralite Cyberdisc 338 (Custom)
TIRES: Pirelli P-Zero Race TLR 28
CHAIN: Shimano CN-HG901
BRAKE ROTORS: Hope Floating (160/140)
SADDLE: Berk Lupina
HANDLEBAR TAPE: Pro Sport Control
=== Time Stamps ===
0:00 Intro
0:49 Build start
1:40 Rear brake hose & caliper
4:40 Di2 routing through the frame
7:50 Headset test routing
8:49 Wahoo Kickr incompatibility and Fix
9:33 Bottom Bracket installation
10:35 Crank & pedal installation
11:50 Seatpost and saddle installation
12:33 Rear Derauiler installation
12:40 Cockpit test installation
13:17 Fork Steerer cutting
14:44 Front brake hose and caliper
16:14 Fork/headset/stem routing & installation
18:01 Di2 routing handlebars
19:07 Final brake hose measurement and cut
20:51 Brake bleed
22:50 Handlebar tape wrap
25:27 Bottle cage installation
26:14 Chain sizing and installation
27:46 Gear indexing
28:14 Chainstay protection and chain lube
29:16 Weigh-in and wrap-up
Insta-GRAM:
/ ridesofjapan
Music is from:
www.epidemicsound.com/referra...
========================
S U P P O R T
T - S H I R T S
➡︎ teespring.com/stores/ridesofj...
Another way to help support this channel is to use the links above or here below when ordering anything from Amazon. It will not cost you anything extra, but a small commission will go to this channel.
USA: amzn.to/2NvudFq
UK: amzn.to/2SxK1se
Germany: amzn.to/2Vp6cCF
Canada: amzn.to/2YhOlQs
========================
#bikebuild #trek #emonda #dreambuild

Пікірлер: 653

@ridesofjapan 3 жыл бұрын

The final pieces to "complete" this build and lower the weight a bit more can be seen here: kzfaq.info/get/bejne/oKyWq7yJ0ZmuY6M.html Thanks for watching!

@jesuswouldkilhimself Жыл бұрын

What is the music at the beginning of the video please? Thank you

@d1ecast 3 жыл бұрын

When tightening up a threaded bottom bracket try putting a plastic bag between the splines and the tool. It helps them engage a bit more tightly, and if you do slip it can help protect your paintwork

@jaspreetsidhu5708 3 жыл бұрын

This is God level advice.

@jcsrst 3 жыл бұрын

This comment is a good reason to take a look at the comments! Thanks!

@vantewan 3 жыл бұрын

will try it out! thanks a lot!

@dieterbierman9803 Жыл бұрын

I did mine with a peace of cloth and a pipe wrench.. Does that also count as good practice?

@SIvers-or2ke 3 жыл бұрын

Ahhhh. Now I can relax. Everything is back to how it should be. Beeeeaaaaauuuutiful

@KnobleKnives 3 жыл бұрын

Dude, I enjoyed this infinitely more than the Dream Build vids. No shade to them, but I really enjoy your commentary and it's interesting to hear the thoughts and calculations behind this build. Great work, man! Enjoy the rides to come with this beaut!

@ridesofjapan 3 жыл бұрын

I too am a big fan of the dream build videos, but at the same time I always wish they told me more about the builds rather than just shallow angles and slow jamz. Glad you enjoyed this though, cheers! :)

@thenileriver15 3 жыл бұрын

True!!! Was thinking the same. 33 minute video and I didn't even skip a bit. Unlike the other build vids I just put on 1.5x speed.

@kayo7082 3 жыл бұрын

@@ridesofjapan I can´t agree more. Your details are helpful and better than shallow angles and slow jamz ;)

@abedfo88 Жыл бұрын

Woah woah there's space for both build types in this world!

@danielbum912 3 жыл бұрын

I would never claim weight doesn't matter in a hilly part of the world such as yours. For me though, a light bike is only nice when carrying it up the stairs. :)

@jarrodfife242 3 жыл бұрын

Yeah all the racing is do is mostly on flat roads or at most a kermesse or rolling terrain. So I don’t mind a bike been 8kg if it’s cheaper and aero

@izylldus 3 жыл бұрын

Couldn't agree more that every bike SHOULD be weighed with pedals & bottle cages in them. Thanks for the great vid!

@rafaelgodoy903 3 жыл бұрын

every bike should be weighed including the rider

@XX-is7ps 2 жыл бұрын

Does it really matter so long as every manufacturer does the same so that you’re comparing like for like? It actually makes sense not to include pedals since people all use different pedal systems

@aygwm 2 жыл бұрын

Lol, weight weenies

@laurenz323 2 жыл бұрын

@@XX-is7ps totally true. Everyone is using different pedals and bottle cage/ cages. Also a company who sells their bike without pedals and bottle cages only can mess the weight without these parts

@Smarterthanyou-mthrfkr Жыл бұрын

Yeah, what’s with all the secrets around bike weights!!!!!

@NP-kc5qd 3 жыл бұрын

Hey Brother, I love your attention to detail. I checked your channel everyday looking out for this video. Keep it up, your content is a diamond in the world of cycling!

@richardharker2775 3 жыл бұрын

Strangely enough I enjoyed watching this with my coffee. The feeling of building yourself is you KNOW how it went together with loving emotional care. And that, is satisfying.

@user-kz9lg5vr2k 3 жыл бұрын

Only January and it's Christmas time again! Thanks for the great content!

@sirces9 3 жыл бұрын

If anyone was embarking on a bike build I would highly recommend that they watch you. Your attention to detail and listing of tools and parts... blows my mind.

@jimhansen5395 3 жыл бұрын

This is honestly the best bike build video I've watched. Mostly for the reasons others have mentioned - the descriptions of the components and procedures, with just enough detail to be intersting, but not so much to make it boring. Congrats on the new bike. It looks amazing... and that weight - WOW!

@russellbaker4256 3 жыл бұрын

I liked the bits where things didn't go as planned, yet you still showed them. Unlike other dream builds that only show the smooth part installations

@michaelcawley7400 2 жыл бұрын

Working on emondas for new builds I’ve learned to always put painters tape around there until it’s torqued to prevent marks

@FreemanBR 3 жыл бұрын

Wicked bike mate, congrats. Thanks for the video, learned a thing or two there for sure. I love how your make fun of yourself, with the little mishaps here and there, and humbly show us that you are human like all of us ❤️

@DerHackbart 3 жыл бұрын

Congrats to this awesome build. As you mentioned yourself, you have build it with your own hands and effort. So any top of the shelf superbike ever doesn't come close to your bike. The build process itself was a pleasure to watch. I love how calm (at least in the final cut 😉 ) you work on your bikes.

@sustainf 2 жыл бұрын

Respect for any cyclist that can do this. Amazing job! Fellow Japan cyclist

@Gyikhuszar88 3 жыл бұрын

It is very rare to a see a correct a bar wrapping on youtube (including the popular dream builds). Great content!

@deeranfoxworthy6069 3 жыл бұрын

Thank you for going back and redoing the flats of the bar. And I'm sure you'll appreciate it later too!

@rendezvous_with 3 жыл бұрын

Congrats on the new ride! And thanks for showing the mistakes along the way, even as minor as they were. Its how we all learn.

@eliroberts9362 Жыл бұрын

30:35 Thank you for saying that! I hate when people weigh their bikes without pedals, bottle cages, or even bar tape. Necessities need to be included in the weight!

@johannesheinonen9677 3 жыл бұрын

Pro tip: There is a preload adjuster for the TL-BH62 brake hose tool so the hose wont slip :) Greetings from Sweden

@ilgour 3 жыл бұрын

Superb paint job. Enjoy the new bike. Totally agree with you, weight matter.

@monty2078 3 жыл бұрын

I absolutely love your videos; was waiting for this. You Swedes understand Canadian winters so you know I am drilling over this bike as even skiing is shut down. Beautiful build, can't wait to hear your ride impressions. Thank you.

@sugarcyclist6526 3 жыл бұрын

Feeling happy like it's my own bike! Glad for you and wish more more climbs !

@silviudicu664 3 жыл бұрын

Congratulations - nice colour!

@frankyfung6491 3 жыл бұрын

oh man i have watched this 10 times already and i couldnt stop myself watching this again

@thierrym6168 3 жыл бұрын

So cool to finaly watch this episode . Thank you so much.

@Joshuavoice29 2 жыл бұрын

What a great ride! I'm happy for you my friend.

@kubagajda7347 3 жыл бұрын

As much as I'm a full-on Domane fan, this bike is a thing of beauty. Clean as a nun. Congratulations! Ride safe ;)

@dlevi67 3 жыл бұрын

You clearly haven't met the nuns I have... or know the joke about the two nuns cycling over cobbles. ;-) (Never heard that saying before - thank you for posting!)

@kubagajda7347 3 жыл бұрын

@@dlevi67 xD

@elvisderblasehase9522 3 жыл бұрын

Detail is everything. I love your vids.

@radeck2007 3 жыл бұрын

33 minutes passed like 5... damn I love it.

@wilfriedscheele8154 3 жыл бұрын

Wonderful bike, wonderful set-up video! It was worth the wait. Thank you.

@admahecha 2 жыл бұрын

I love the narrative of your videos mate, never change

@eliasleverato9373 3 жыл бұрын

You're great, man! That's what I call Passion!

@TheBRad704 3 жыл бұрын

Beautifully done and the visible weave of the bars, cranks and wheelset is just icing on the 6.345kg cake.

@kingaroykid 3 жыл бұрын

Definitely worth the wait for that video. Love the colour on the frame. Commentary is great too. Thanks ROJ, yet again you have delivered.

@relikvija 3 жыл бұрын

Thanks for sharing the knowledge buddy!

@tudidingsapparel7197 3 жыл бұрын

This is the best tutorial for bike assembly that I have ever seen! Thank you!

@JibbaJabber 3 жыл бұрын

Big Respect!! One of your best vids yet. Great balance between tech and tips. For me, the trickiest bits we're rear brake bleeding and lever reach adjustment. For some reason, one kept one screwing the other. BTW, I spent the cash a few years back and got that Shimano tool - a brilliant tool and worth every penny. Follow the mantra: 'right tool for right job'. Superb choice of bike and components. A lightweight bike does feel different. But like you said - STFU😂 - just get out there and enjoy it. 👍👍👍👍👍👍👍👏👏👏👏👏👍👏👏👏

@paulm4113 3 жыл бұрын

Congrats on a great build!! Enjoy the ride!!

@a_scotsman_on_a_horse 3 жыл бұрын

This is a satisfying watch - great job!

@adamcooper988 3 жыл бұрын

That frame colour is great

@guzz95 3 жыл бұрын

Congrats!!! Beautiful bike, and video!!!

@NeutralGenericUser 3 жыл бұрын

What an incredible build. Congratulations!!

@ichallengemydog 3 жыл бұрын

So many drool-worthy parts. This is a very well-curated build. Hot damn!

@andygrace3825 3 жыл бұрын

Use the plastic wrapper from packaging for the BB between tool and BB when installing to prevent marking from tool :-)

@CloudSpirals 3 жыл бұрын

This build is superb, impressive and straight up awesome 👌 Enjoy the rides ahead of you and stay safe!

@EditioCastigata Жыл бұрын

20:26 For your next build, use strapping tape instead of electrical. The former can be removed without residue and is designed to not stretch.

@danielbum912 3 жыл бұрын

I still laugh about the name of that scale every time I see it. Wondering whether it's a coincidence or not. And what a gorgeous bike.

@dfrolovXIII 3 жыл бұрын

been waiting for this for a month! man, soooo inspiring!

@christophbosshard4028 3 жыл бұрын

Great build and good practical tips. Thank you!

@12CORE21 3 жыл бұрын

Slippery Saddle: I have a "Selle Italia SLR Superflow S3", which i found way to slippery. I used some "Profile Design Aerobar Wrap Tape - black", its working great, no more slipping around. Eventualy/might be a bit harsh on the bib shorts in the long run... ´ll see.

@Horstelin 3 жыл бұрын

Ask Tony Martin!

@rodcosta2345 3 жыл бұрын

Amazing job! Love the explanations and editing.

@karlvandenborne9359 3 жыл бұрын

The shimano hose cutting tool can be adjusted when it slips. A flat head screw driver fits somewhere on the tool to adjust the fit. As you can also read in the manual

@kinkyform 3 жыл бұрын

Amazing work as always!

@NoName-ot8uu 3 жыл бұрын

Well that was a delight to watch.

@WheelersAtLarge 3 жыл бұрын

Really nice, love that front end.... Seat clamp half way up the post is a shame. Fantastic colour, looking forward to seeing it on the road👍

@discoverVNmusic 3 жыл бұрын

Yes!! The wait is over😂🚴🍾!! Beautiful build, love the 1x set up.

@xtra9996 2 жыл бұрын

Bookmarked because there're some neat tips which can come in handy sooner or later. Great video.

@pasque7409 3 жыл бұрын

Awesome build! As a side note: for robust, grippy and thicker handlebar tape, I've really come to like the Specialized Roubaix bar tape. Seems quite similar to the Pro Sport Control you are using.

@larisonjohnson 3 жыл бұрын

Awesome build! Nice paint! Love the multi-color. 🤩 Bike looks SWEET. There is nothing like building it yourself. Perfect connection between rider and bike. Paying attention to every tick, click, and gram 😉 Though I almost shed a tear when the BB tool slipped, that’s is my biggest fear. 😢 But where there is a ding, there is a future upgrade waiting to happen.

@josephphillips865 3 жыл бұрын

Those Shimano quick links are a lot tougher to install than other brands like KMC. I ended up buying pliers which could both remove and install quick links.

@kennethstreet7868 3 жыл бұрын

Wolftooth components has some great quick link pliers.

@imperialspy3457 3 жыл бұрын

The super B tool?

@josephphillips865 3 жыл бұрын

@@imperialspy3457 Yes, that's the one. I forgot what brand it was. Their 2 in 1 link pliers are awesome.

@orengardz4191 3 жыл бұрын

16:20 love the nail clippers 😂

@rodrigocastro9323 3 жыл бұрын

Beautiful, gorgeous video. Amazing job as a host. Production value is just *chef's kiss* I really can't compliment you enough on your channel. Going out for a ride, got me excited

@allthingsTechrelated 3 жыл бұрын

So many people have said so many beautiful words on my behalf. Nice bike.

@joschneify 3 жыл бұрын

Brilliant stuff as always! 👌

@rustyshortland17 3 жыл бұрын

Hell of a build dude..Very nice!

@twparnell 3 жыл бұрын

Really thorough build, love it!

@Plasmo20 3 жыл бұрын

Fabulous as ever. Such great videos you make, and the dry humour..... love it. Bling, bling, BLING!!!!

@aperezy17 3 жыл бұрын

Sweet build. I love your organization and detali oriented work. Cheers

@kurtc6949 3 жыл бұрын

So sharp, build turned out sweet

@TomboLP 3 жыл бұрын

Awesome! I keep wondering if I'll see you out on the road when I'm riding in Japan. You must, by now, get recognized all the time.

@ploughmyfield 3 жыл бұрын

I've been waiting for this video for so long and it didn't disappoint. I waited until all the family were occupied, I sat down with my headphones on and drank in the whole experience in one thirst quenching mouthful. My observation the tools you use to assemble the bike are getting slicker (even though you said you don't like spending money on tools) they just make it easier. Scales on a bike build should be mandatory, just so you can be aware of how heavy all the parts you are adding weigh. I also agree everything you need, pedals, Garmin mount, bottle cages should be fitted before the final weigh in. Well done this is a super piece of work. You should be very proud. Are there awards for films like this, is this a category of film, what category is it?

@swillia6rider 3 жыл бұрын

Holy top shelf build, batman! Really enjoyed your process.

@pk9099 3 жыл бұрын

Great build video. Your detailed explanations are excellent. Your video can really help others to avoid or overcome similar issues that they may encounter.

@izziel11 2 жыл бұрын

Absolutely gorgeous

@hardmtnbiker 3 жыл бұрын

I’ve made the same mistake cutting my chains many times. I’m using KMC SL chains now, I really like them.

@dlevi67 3 жыл бұрын

Well, you didn't outdo yourself in the intro (vs. the frame reveal intro), but the actual weight reveal was VERY nicely done. I hope you enjoy riding this as much as I enjoyed watching you build it - and much more! FWIW, I quite like the "frosted" effect of the chain protector.

@kevinwells1660 3 жыл бұрын

The 85.5 width was made for automated tooling at the factory. So the trek/praxis cups have a deeper tool fitting. Less chance of slipping off like in your video

@jevgeniardassov 3 жыл бұрын

Congrats man. Gorgeous bike.

@jcsrst 3 жыл бұрын

Beautiful bike! The paint is insane. I really enjoyed the build process, nice to hear what and why you were doing what you were doing ; )

@williamkochi1415 3 жыл бұрын

Congrats on your new bike! Very nice build! And light bikes do make a difference when climbing. As always, a nice video presentation. Enjoy1

@michaelborg3017 3 жыл бұрын

Awesome loved it!! Such an amazing bike!

@lukasvoesenek5642 3 жыл бұрын

Sweet ride. Emonda SLR FTW any time

@jennifernash8510 3 жыл бұрын

Beautiful build!

@mikehudson8 3 жыл бұрын

Really enjoy this channel and this build video! Love the cap also, I need one. Keep up the great work man!

@paciax 3 жыл бұрын

Daaaaamn! That looks nice!

@jomshobbies Жыл бұрын

Great build, I really like the color!

@TheVolksbar 3 жыл бұрын

She is really pretty. Your VDOs are very helpful and entertaining at the same time. Thank you for sharing.

@waluta 3 жыл бұрын

I would love to try riding the climb such a lightweight bike as that. Great bike

@monkeyking847 3 жыл бұрын

Awesome video! that Shimano tool is my personal favorite at the shop. BTW, there is a bolt that takes a flat head screw driver on the end of the tool that you can tighten to increase the clamping force on the hose! So when some oil inevitably gets on it, the hose doesn't start sliding backwards. Love your thinking with the carbon paste tho.

@nienkerk1 3 жыл бұрын

Thanks! Brilliant as usual 🤩🙌

@LukeChiao 3 жыл бұрын

Love the video! FYI- the Shimano quick link tool works great with Shimano quick links, which are particularly tough. It allows you to squeeze the tool to pull the links closed.