A LOT of welding for Mitsubishi Pajero
Рет қаралды 4,378
9 ай бұрынWelding both inner and outer sills, both chassis legs and various other holes on my Pajero, rebuilding brake calipers and fitting new drop links aswell.
@sanczes6916 4 ай бұрын
Great job! I bought my pajero few weeks ago with the same paint job as yours, and i finded out there are some covered in thick paint holes in floor :,) several sheet metal workers refused to help me, even though I wanted to pay them extra (in my country cars on frame are uncommon), I was resigned, but I pulled myself together and decided to learn welding, I live in an apartment building in a big city, so it will be difficult. Your video helps me a lot, for example by telling me how to get rid of plastic, great job my friend i hope my dreams with overland car will come true soon. Big regards from Warsaw Poland!
@StevenRobertTaylor 4 ай бұрын
Hi, amazing that my videos are helping people in Poland! Yes very time consuming doing welding on old cars but if you can put the hard work in it's very rewarding! Always clean the metal back, get a good earth, mess with welder settings to get the correct current and take your time. Don't weld too much in one place or the metal can warp. Good luck with your restoration and thanks for watching!
@sanczes6916 4 ай бұрын
@@StevenRobertTaylor Thank you very much for your advice! I will definitely listen to you. Every day I discover new rust, but I believe that nothing is impossible :,)
@altuser. 7 ай бұрын
Amazing job! I would advise you to apply a welding primer before using mig/mag to weld, this will prevent too much HAZ which makes the material around not as brittle. Try to not polish the welds as much as you did. Pajero gets eaten up by rust so maintaining strong welds om rust affected parts and mandatory.
@StevenRobertTaylor 7 ай бұрын
Thanks for the tip! Yeh I agree on grinding the welds but sometimes it's hard to resist going for that seamless look (not that anyone is going to see it)
@rhaymarkJZX 5 ай бұрын
Awesome video! I have to the same to my Pajero! It has 124k KM on it but sadly bits of sills has rotted.
@StevenRobertTaylor 5 ай бұрын
Thanks! Yeh this was a labour of love. Probably wouldn't have bothered if it was any other vehicle.
@ivanhoe6366 8 ай бұрын
Good work buddy...... I wish I had a lift when I was doing mine. Lying on the ground is not nice. 👍
@StevenRobertTaylor 8 ай бұрын
Thanks! Yes lying on the floor is bad enough never mind welding while doing it!
@peterszokronyos8070 3 ай бұрын
Awesome video! I have to do the same things on my Pajero as well soon. May I ask what wheels do you have? They look great!
@StevenRobertTaylor 3 ай бұрын
Hi, thankyou! I think that's part and parcel of owning a pajero is having to have it welded at some stage. They are made by a company called Centerline, which I believe are American. 15" diameter and 33" Cooper STT tyres. Thanks for watching
@T4yyib11 25 күн бұрын
What thickness sheet metal did you use to patch the inside wheel arches 1.2mm with 0.6wire ?
@StevenRobertTaylor 25 күн бұрын
@@T4yyib11 Hi, yeh 1mm or 1.2 with 0.8mm wire. Just the way my welder was set up. Thanks for watching!
@GrumpyAlf 6 ай бұрын
Nice vid. How long does it take in real?
@StevenRobertTaylor 6 ай бұрын
Hi, took me around 35-40 hours. That includes the work on brake calipers and drop links.
@GrumpyAlf 6 ай бұрын
@@StevenRobertTaylor Thanks! Best regards from Germany.
@StevenRobertTaylor 6 ай бұрын
@@GrumpyAlf Thanks for watching!
@komorayesse6949 7 күн бұрын
Hi, what are the specs of your tyres and rims. They look very solid on your Pajero
@StevenRobertTaylor 7 күн бұрын
@@komorayesse6949 Hi. They're 33 x 12.5 x 15 cooper discoverer stt pro. Wheels are centerline (American) 10j not sure on offset but they sit out alot on my pajero. Thanks for watching!
@komorayesse6949 7 күн бұрын
@@StevenRobertTaylor thanks, planning on similar specs on mine. watching from Kenya
@StevenRobertTaylor 7 күн бұрын
@@komorayesse6949 wow! Is yours 2.8 or 2.5. The 2.8 can take 33s with minimal modification because they have a factory 40mm body lift.
@komorayesse6949 7 күн бұрын
@@StevenRobertTaylor Its 95 2.8. The front end sits afew mm lower than the backend. I have always been curious about this but I am still keen on putting 33s. Got rust on the underbelly beneath the second row seats. This brought me here btw
@StevenRobertTaylor 7 күн бұрын
@@komorayesse6949 Yes they do like to rust at this age now. I have another video coming where I clean and rust treat the underside. You can adjust the torsion bars on the front suspension to raise it fairly easily. I have done this but also have heavier springs from a nissan patrol in the rear.
@iainahastie8658 2 ай бұрын
The problem I see that there are gaping holes in chassis and panels. This would also mean remaining metal will of be compromised at this stage i.e. thinner. After repair this is still a danger to be on the road. If it was a one of the kind /classis OK, but it is not. So should have been junked and sold for parts and taken off the road
@StevenRobertTaylor 2 ай бұрын
Hi, you are correct in your statement about the remaining metal being thinner, but that is just how aging vehicles goes. I check this car regularly, it has passed two more yearly safety inspections with no issues. I have checked the entire chassis over and it is still solid, in fact there is still factory paint on the front half in places. It is true it is not a one off classic but I have owned this for many years and there are no other ones I have seen in my local area. Scrapping it for parts is abit dramatic at this stage. Thanks for watching.
@StevenRobertTaylor Ай бұрын
@@vikingdrummer9140 Yeh that comment was a little dramatic. Vosa wouldn't do anything, car is 100% legal and MOTd
Lebecky Restoration
Рет қаралды 958 М.