A new way to fix the GAP in mitred joints! DONT USE SAWDUST AND WOODGLUE ANYMORE
Рет қаралды 44,272
3 жыл бұрынI found an easier way to fix a gapped joint. I use CA glue and sawdust for a seamless fix.
(CA glue)2P10 on Amazon: amzn.to/2Rw3oUD
*RECENT VIDEOS*
BASEMENT WOODSHOP BENCH BUILD | PART 2: • BASEMENT WOODSHOP BENC...
BASEMENT WOODSHOP SETUP PART 1: • BASEMENT WOODSHOP SETU...
NEVER USE POCKET SCREWS VIDEO: • 3 REASONS TO NEVER USE...
BUTCHER BLOCK CARE VIDEO: • BUTCHER BLOCK SEASONIN...
DIY WHITEBOARD VIDEO: • $20 whiteboard | dry e...
*LINKS*
MY SHOP LIGHTS: amzn.to/2uDhScR
MY WEBSITE: kevinswoodcreations.com/
MY AMAZON WISHLIST: amzn.to/2Ruv1OH
*SOCIAL MEDIA*
/ kevins_wood_creations
/ kevinswoodcreations
paypal.me/kevinswoodcreations
*SUPPORT*
Your support, whether watching my videos or visiting the links below, directly supports our channel at no extra cost to you continuing to make quality content for you and is greatly appreciated! amzn.to/36t4WUf
I love your feedback and appreciate ALL of the comments that I receive. My woodworking helps support our homestead and all of the projects that we have going on now and in the future.Please help me build my audience and provide some of the best craftsmanship that I can produce. I love new ideas and your suggestions are always welcome.
#shopsmith #kevinswoodcreations #makinsawdust
3 жыл бұрын
Unless you try out the innovations, you cannot learn something new. And you are always working to teach innovations. And you always produce innovative studies and ideas. Thank you for sharing. See you. greetings.
@MakinSawdust 3 жыл бұрын
You have the nicest and observant comments. Thanks so much!
3 жыл бұрын
@@MakinSawdust You're welcome. See you. greetings.
@kris2667 3 жыл бұрын
I don't know why I waited so long to buy CA glue, wouldn't be without it now. Cheers
@gerarddelmonte8776 2 жыл бұрын
I have always been leery of using CA for this type of work on my own boxes, but have never been really satisfied using Titebond or Elmer's and sawdust. You have shown me that I should give CA a try, thanks!
@timothydaniels504 2 жыл бұрын
Thanks for the tip. Exactly what I was looking for.
@rivertablescranmer2591 2 жыл бұрын
I love CA glue, you hit the nail on the head and I also really like the box
@darrenbaugh6579 Жыл бұрын
Good video dude. Thanks.
@MakinSawdust 7 ай бұрын
Thanks
@DesertBumWoodWorkn 3 жыл бұрын
I have used the wood glue and sawdust, now I'm going to use CA and dry sawdust, thanks Kevin
@joyceterra2265 3 жыл бұрын
Beautiful box. Thank you for the tip.
@christofix 3 жыл бұрын
Great tip Kevin. I'm going to try that too!
@michaelstephens360 2 жыл бұрын
Ahhh, it’s like you were watching me through my basement window. This is step for step the dilemma I came here for thanks!
@CBBC435 5 ай бұрын
Thank you!
@MakinSawdust 5 ай бұрын
You're welcome!
@HomesteadingNorthernMichigan 3 жыл бұрын
Another great video... I use both tight Bond and ca glue to fill the gaps in my crapsmanship .. beautiful box
@oldpath7357 3 жыл бұрын
Looks good to me. Wood glue and sawdust never did work all that great for me....I'll give this a try.
@jessaminutesir 3 жыл бұрын
Brilliant! So glad I subscribed a few weeks back. These are seriously useful tips I can actually apply in my workshop. Thanks again!
@MakinSawdust 3 жыл бұрын
Welcome aboard & glad it was helpful. I sure hope to be able to continue to deliver some helpful things. I shoot for Sunday uploads and sometimes I may squeeze in another during the week :)
@suburbanhomesteaderwy-az 3 жыл бұрын
Love the boxes, great video Kevin.
@MakinSawdust 3 жыл бұрын
Thanks so much Sandi!
@thriftyveegee4129 3 жыл бұрын
I love your work.
@bobleeswoodshop7919 3 жыл бұрын
👍 I use that idea on my wood turnings when I am using my lathe! Works great , sand it clean!
@MakinSawdust 3 жыл бұрын
Right on. I actually stole a tip from the turners on YT by using CA. It works like a charm.
@bobleeswoodshop7919 3 жыл бұрын
Makin' Sawdust when something works it works! 🤗🤗🤗🤗
@MarkMcCluney 3 жыл бұрын
Thanks Kevin, always a treat and an education. Cheers mate.
@MakinSawdust 3 жыл бұрын
Glad you enjoyed it Mark. I hope all is well in Ireland for you and yours. Stay safe friend :)
@SteveBossie Жыл бұрын
Fantastic hint, thanks!
@jesusislord2457 3 жыл бұрын
Looks great!
@budgillett9627 3 жыл бұрын
I just looked at your info page and Gillette is a large city by WY standards. Keep blest!
@e.dbogan6266 2 жыл бұрын
Thanks for the tip. It will help me with my small boxes.
@MakinSawdust 2 жыл бұрын
No problem!
@patrickbink4617 2 жыл бұрын
This looks like a great tip. I am working on a small mitered box right now and I think this will be quite useful.
@MakinSawdust 2 жыл бұрын
Glad it was helpful!
@WhiteLabWorkshop 3 жыл бұрын
I've noticed the same thing with the traditional glue/sawdust combo. Sounds like I need to finally get some CA glue! Thanks for the tip!
@MakinSawdust 3 жыл бұрын
Glad it was helpful! Thanks for stopping in :)
@nickcoumbe 3 жыл бұрын
I'm inlaying a Purple Heart guitar neck and this is a really helpful video, thanks
@MakinSawdust 3 жыл бұрын
Glad it was helpful!
@e.dbogan6266 Жыл бұрын
Thanks for the tip; I will try CA glue now.
@MakinSawdust 7 ай бұрын
Big thanks
@GaryZellner-nx4wq 10 ай бұрын
Great advice and tip. Thanks !
@MakinSawdust 7 ай бұрын
Glad it was helpful!
@michebre 2 жыл бұрын
Thanks so much this video is a big help. I greatly appreciate it.
@MakinSawdust 2 жыл бұрын
No worries!
@dscritter614 2 жыл бұрын
Funny. I just discovered this myself. I used the thin glue. Came out really nice.
@MakinSawdust 2 жыл бұрын
Glad you like it!
@hpdiesel 2 жыл бұрын
Thanks for sharing your knowledge Kevin! made me a subscriber. just had one question, do you wait for the glue to dry before sanding? hope it's wait to dry as that's what I'm doing now lol.
@MakeThings 3 жыл бұрын
I’ve heard this before Kevin, and have done it myself with the ring I made. Great tip. Oh and a tip back to you...use water in place of activator.
@MakinSawdust 3 жыл бұрын
Thanks Rob. And also thanks for the water tip. You rock
@TheWoodYogi 3 жыл бұрын
I didn't know about using water Rob. I'll be giving that a go tomorrow, especially as I ran out of activator last week and can only buy it as part of a kit with the glue 😊 ॐ
@MakeThings 3 жыл бұрын
The Wood Yogi TRY it first. I suggested it to someone else and they said it was a fantastic tip. Maybe it doesn’t all work the same, but when I’ve done it, it’s worked. Maybe use a spray bottle and test it out.
@titoramos5766 3 жыл бұрын
Great advice. Thanks
@MakinSawdust 3 жыл бұрын
Glad it was helpful!
@northwiebesick7136 2 жыл бұрын
Would the CA glue trick work on bigger holes and gaps, or is it mainly for smaller holes and gaps? My dad made me a bit of a headboard for a Christmas present, but there are a few interior fitment and miter gaps I'd like to make more invisible, aside from a half inch thick gouge on the bottom shelf board, it looks like he fixed using the glue and sawdust trick... Also, what CA glue, or what brand, preferably cheap as possible, would you recommend for bigger gaps and things???
@Wtfever.................. 3 жыл бұрын
Great 👍tip thanks so much!
@MakinSawdust 3 жыл бұрын
Glad it was helpful!
@TheGrantAlexander 3 жыл бұрын
Good tip Kevin. I've never had much luck with the wood glue and saw dust (seems to not stick that well for me) but ca glue has worked much better 😎
@MakinSawdust 3 жыл бұрын
Thanks Grant!
@AllthingsJimThorpePA Жыл бұрын
Can you use this technique on mitered baseboard gaps? Trying to hide in red oak
@cherylgeisenhof7748 3 жыл бұрын
Hi Kevin, Suburbanhomesteaderwy sent me over to your channel. I like the recipe box, it looks nice.
@MakinSawdust 3 жыл бұрын
Thanks for coming. I have a full build video soon of the boxes :)
@thomasscharton1299 Ай бұрын
Good tip, thank you! Will this work with stain?
@MakinSawdust Ай бұрын
Perfect
@learnspanishwithsenorad.6743 Жыл бұрын
Nice.
@MakinSawdust 5 ай бұрын
Thx
@shastastan1935 2 жыл бұрын
Thanks for this video. I've used CA + sawdust before, but I put the glue on 1st which was a mistake.
@MakinSawdust 2 жыл бұрын
Glad it helped
@TheWoodYogi 3 жыл бұрын
Nice tip Kevin 😊 I've been doing this for years. Something I learned from a guitar builder. It works great on most materials too 😊 ॐ
@MakinSawdust 3 жыл бұрын
Right on!
@ChinJazz 2 жыл бұрын
That's cool! I'm a guitar builder and looking to try this now on a chip out area from fret removal of a maple fretboard. Fingers crossed 😊
@simonmurray2002 3 жыл бұрын
I've done this one and it works great. If your gap is going to effect the structure and you need to ensure depth I have been known to use the shop vac turned down to the lowest on the back of the joint to pull the glue and dust down. If the gap doesn't go to the back I have used jewellers drill bits to open it a little from the other side and then fill them the same way afterwards.
@MakinSawdust 3 жыл бұрын
Excellent tips buddy! Thanks for stopping by and sharing some 'insider' tricks :) All is appreciated !
@virginiareid5336 3 жыл бұрын
Thank you for the wonderful tutorial. If I can ever get things as I want them, beware, I know who to contact for help! 😉
@MakinSawdust 3 жыл бұрын
You are so welcome!
@FixitFingers 3 жыл бұрын
Nice Kev. I use white PVA instead of Titebond as it dries clear for this exact same reason. Not tried CA, will have to give it a go.
@stevesiefken6432 3 жыл бұрын
What brand of white PVA glue did you use?
@FixitFingers 3 жыл бұрын
@@stevesiefken6432 g'day Steve. Selley's Aqua Adhere from Bunnings
@JimDockrellWatertone 3 жыл бұрын
I've used the CA glue trick. Always hated the look of wood glue and sawdust, you can always see it. To do the fix, ya gotta be makin' sawdust!
@dhansen57 3 жыл бұрын
Great video! I think you just saved my entire project! Thanks!
@MakinSawdust 3 жыл бұрын
Glad I could help! It would awesome to hear about your project!
@ericschulze5641 3 жыл бұрын
Minwax wood hardener also can come in handy
@kimberlibruso9522 Жыл бұрын
Beautiful box! I have used a quick 5 minute set up epoxy for this. Works ok. Imagining ca glue would strengthen much better because it would soak into the wood farther?
@MakinSawdust 2 ай бұрын
Could be
@steveh567 3 жыл бұрын
Always seem to need to fix gaps 😱
@suburbanhomesteaderwy-az 3 жыл бұрын
Playing them all.
@tedalmeida 2 жыл бұрын
I like your idea for a drum sander. Do you have a video on it?
@MakinSawdust 2 жыл бұрын
yes, there is a playlist on the channel
@tedalmeida 2 жыл бұрын
@@MakinSawdust Thanks! Already looked at it yesterday. I'm keeping my eye out for an older "Cheap" Shopsmith. As soon as I get it, I'll try your design. Thanks again! :-)
@ericschulze5641 3 жыл бұрын
Hey you have the same table saw I do do you have an issue with the belt tension changing when you raise or lower it & angle cuts
@MakinSawdust 3 жыл бұрын
If you are referringbto my Craftsman, no I dont have an issue. In your case, look at the motor mount because one bolt should stay a bit loose so the motor can puvot freely.
@HisWayHomestead 3 жыл бұрын
New subscriber... Sandi at SuburbanHomesteaderWY sent me!
@MakinSawdust 3 жыл бұрын
Thank you for stopping by :)
@OakKnobFarm 3 жыл бұрын
neat idea! do you find any problems with it being a bit too glossy after finish? that's one of the things I noticed when using wood glue in the past.
@MakinSawdust 3 жыл бұрын
Well I use a gloss poly for my finish, so I do not notice. If one was to use a different finish, maybe so, but I also think CA and dust is more stainable and blendable to the surrounding wood, compared to woodglue
@HealthyHomesteadChick 3 жыл бұрын
Hey! Just subbed. I was sent over by Sandi at SuburbanHomesteaderWY.
@MakinSawdust 3 жыл бұрын
glad you came by!
@fab186 3 жыл бұрын
Does the CA glue leave a stain or mark after applying finishing? How does wood take finish where there's CA glue?
@MakinSawdust 3 жыл бұрын
I use a spray or wipe on poly and it works good. Thanks for the comment.
@jessicas-discoveries-age-6-12 2 жыл бұрын
@@MakinSawdust I've started using CA glue as a clear finish on my speaker building projects and looks great when sanded flat and buffed out to a high gloss. Used in combination with your gap filling method is a great way to go.
@notahetpig 2 жыл бұрын
where is CA glue available?
@ericschulze5641 3 жыл бұрын
My table saw is from the late 80s are you saying the lower retaining bolt for the slotted bracket should be loose so the motor just hangs and the weight of the motor causes it to self adjust?
@MakinSawdust 3 жыл бұрын
yessir, there will usually be a bit of thread locker on the bolt so it doesn;t back all the way out. I tightened my bolt up too, when I bought it and put it back together. it should be a shade loose. :)
@ericschulze5641 3 жыл бұрын
@@MakinSawdustk thanks it appears to be the exact same Saw you have. I'll give it a try seems like the belt would slip I have the owners manual somewhere 😃
@MakinSawdust 3 жыл бұрын
@@ericschulze5641 if you dont find your manual, there is a PDF copy that you can download on my website
@ericschulze5641 3 жыл бұрын
@@MakinSawdust k thanks
@BGraves 2 жыл бұрын
Titebond makes 2 different translucent glues.
@MakinSawdust 2 жыл бұрын
great tips
@BGraves 2 жыл бұрын
@@MakinSawdust I used titebond translucent with walnut sawdust just yesterday with great results. I went the joint with glue thoroughly then shove sawdust into the groove with a razor blade. It looks to allow stain and shellac to penetrate the sawdust.
@budgillett9627 3 жыл бұрын
If I’m correct you live in a small eastern WY community. I doubt if you’ve got enough of a local customer base to sustain your woodworking business, assuming you’re not a remodel specialist, so how do you market your products? Thank you sir!
@MakinSawdust 3 жыл бұрын
Great question Bud! I don't rely on local business only. A fair bit of my business comes from online sales from butcher blocks i make and have on my website. I also make a fair bit of sales from repeat traffic from my (very) loyal audience on my main(other)channel. Also my income does not rely soley on woodwork. KZfaq, website and affiliate marketing have their own flow of revenue. The main point here to understand is that I live very humbly and dk not have car, boat, camper, etc payments. I also am very frugal as it comes to groceries and frivolous expenditures. No cable tv or satelite here. I live well within my means and am happy 😊
@casperwallace9685 3 жыл бұрын
I waste so much wood because my cuts are always too short, I don't know why because I check, double-check and triple-check. I even add extra because I just know it will be short and even with the extra, they turn out short. They look the right size until I actually cut them - then they turn out short. It's driving my mad. Thank god this is only for my own use. I like to play around with these tools to see what I can do. I am not very good tho...........lol
@mayagayam 2 жыл бұрын
Is your kurf fully on the waste side of your line? If you can lay your kurf 1 mm outside your line, then dial in a precise 2nd cut, it should help reduce the short-cuts problem. Hope this helps, cheers!
@casperwallace9685 2 жыл бұрын
@@mayagayam I have no idea what a "kurf" is
@mayagayam 2 жыл бұрын
@@casperwallace9685 The kurf is the cutout made by your blade. If you are not thinking about it, and you cut on your line, that would explain why your cuts run short. The blade takes a chunk of wood out of your material, so you have to make sure the cut line is outside the line you draw. First measure the material you want, draw your line at the edge, then cut outside the line you drew. The blade will take the kurf chunk out of your waste material instead of the material you want to keep, and your cuts will be more accurate (as long as your tools and hands are going correctly). 😉
@casperwallace9685 2 жыл бұрын
@@mayagayam thank you, Yeah I know that too but the god of wood hates me......i swear.......lol
@Pontiacdreams 7 ай бұрын
Geez, you said no sawdust and …glue. Nothing new here.
@MakinSawdust 7 ай бұрын
Critical is flattering on you! Fits your style perfect! Nice day pal, keep watching
The Evening Woodworker
Рет қаралды 1,2 МЛН
Inspire Woodcraft
Рет қаралды 114 М.