[UPDATED CA Glue Tips and Tricks] How to Use CA Glue Like a PRO!

Рет қаралды 76,041

Күн бұрын

Once you have tried using CA glues in the woodwork shop you will see just how indispensable they are, with so many different viscosities, and now with a variety of wood colors and even black and white CA glues, Starbond super glue has really stepped up to be a premium supplier. I am constantly filling knot holes and cracks in boards, using CA glue for jigs and small repairs, this list of uses is endless and when you combine the use with Starbond accelerator and get instant drying, it opens a whole new world of possibilities, for example as shown in the video making wood rasps that work in literally seconds, attaching securing bolt heads so they don't turn and more, for me they have become like another pair of hands in the workshop.
Read the Full Article on these UPDATED CA Glue Tips Here - bit.ly/3zPUoA5
*** To Purchase Starbond Premium Superglues - bit.ly/3UckCoz
Starbond e-Magazine Meet the Makers - bit.ly/3DOkIfc
**** Colin's most used CA Glues
* NO-05 Starbond Infiltrant Odorless Thin CA Glue
* KEG-500 Starbond Flexible Heavy Medium
* BR-500 Starbond "Dark Brown" Medium-Thick CA Glue
* Starbond Pump Sprayer Accelerator 2 oz
*****************************
More Starbond CA Glue Tips PLAYLIST: • CA Glue for Woodworking
*****************************
#starbond #woodglue #caglue
*** Amazon Affiliate Store - www.amazon.com/shop/woodworkweb
*** Magswitch Affiliate Store - mag-tools.com/discount/COLIN_...
*** Canadian Amazon Affiliate Store - bit.ly/38h1uib
*** T-SHIRTS and Fun Stuff - teespring.com/stores/woodwork...
**** Subscribe here - / knecht105
** Like me at Facebook: goo.gl/DLgvoa
** Visit the website: www.woodworkweb.com
** Follow on Instagram - / colinknecht
** Follow on Twitter: / woodworkweb

Пікірлер: 68

@stephenschifani1316 Жыл бұрын

I am literally applying CA glue for the first time tonight. Thank you! Very timely as well!

@IIIofV Жыл бұрын

Thanks Colin. When I fill cracks or marks or imperfections. I make a pile of sawdust my using the exact same wood. Then I pack the hole really tight with the sawdust and soak it with thin CA glue. I’ll add more sawdust to the top as it dries then sand it down. Works well for me.

@ScarletEyeMoon 11 ай бұрын

Thanks for showing me your tips, I feel a lot more confident now to use CA glue.

@brentfrench752 Жыл бұрын

It’s amazing how many uses there are with CA glue! It’s pretty amazing stuff. I actually found some CA glue in my fridge a few weeks ago that’s probably been in the fridge for about 3 years. I tried it before throwing it out, and it still worked great, although not sure how long it would actually hold because of its age, I wouldn’t advise forgetting you have CA glue in the fridge, but recommend that you store it in the fridge as it does in fact extend the life of the glue.

@johnrice6793 Жыл бұрын

Most excellent. I use Starbond glue - your recommendation - great tips. Thank you.👍👍

@WYnWest Жыл бұрын

Easy stick for your rasp? Consider a paint stir stick. Thanks for the tips.

@shastastan1935 Жыл бұрын

I really appreciate the application tips. Very helpful! Thanks!

@MCsCreations Жыл бұрын

Excellent tips, Colin! Thanks a lot! 😃 Stay safe there with your family! 🖖😊

@joelcopeland3018 Жыл бұрын

I really like this video... Great examples and explanations... As always a quality product from you... Thanks for what you do...

@valterleao2798 Жыл бұрын

PARABÉNS…, sempre com excelentes conteúdos! Gosto muito dos vídeos ❤️ Abraço aqui do Brasil 🇧🇷

@erickdanielsson6710 Жыл бұрын

Love using Starbond, The different size tips Help. I keep in the freezer...

@oxcart19 Жыл бұрын

Really helpful tips. Thanks much!

@billybike57 28 күн бұрын

Great advice!

@michelevitarelli Жыл бұрын

Great tips. Thanks for sharing.

@aaudain1 Жыл бұрын

Great idea 💡

@CKDz Жыл бұрын

Use a scraper to remove the "bead" of CA that sits above or on the surface. A single edge razor works well for small stuff

@regularguy9264 Жыл бұрын

I was about to ask if this would be an option. Thanks for the comment!

@andrewbieger5004 Жыл бұрын

Thought the same would be a possibility. Recently bought a paint scraper at HD with extra carbide blades that are slightly curved and fairly sharp. Perfect for scraping a small width line. The other edge of scraper is straight. The blades can be touched up on a diamond stone, too.

@andrewbieger5004 Жыл бұрын

WTF did I respond too?....D'Oh!

@andrewbieger5004 Жыл бұрын

No idea how this ended up here. Was looking at another video....D'Oh!

@andrewbieger5004 Жыл бұрын

wrong video!

@scottbarbara5016 Жыл бұрын

Thanks for tips! I am new to this and although I have Starbond CA glue you gave me some great ideas on it’s many uses! I particularly like the example of the 3 types at the start of your video. As a newbie it helped me understand the difference - I wish I had seen this when I originally ordered it because I wasn’t sure which to get. I did order the medium and it had worked great so far. Thanks again for all your videos - very informative.

@JazzyJADAxxx Жыл бұрын

I learned something thanks :)

@whitag01 Жыл бұрын

You can get sharpie markers that write with silver ink for those dark surfaces

@geolisadrag-racing2349 Жыл бұрын

Colin HELP? Watching a playlist of your videos, a very long time ago, i saw you talk about the kind of gloves you use with CA glue; but later when i wanted to buy some, i wasn't able to locate the reference again. So, I was so excited, to see this updated CA glue tips video, and I made sure to screenshot the gloves type when shown in white on the screen. But, like some others have said in the comments, I cannot find Polythyrene Gloves. Can you help us out with a Link, or brand name? As always, great content Colin!👍 I love your channel and I very much appreciate all of the care, up to date & welcomed information, and very hard work that you put in to all of your videos. Thanks for over 14 years of wood working goodness! ~ 🛠Lisa♿ PS I will, follow the link and read the full article, in search of my answer, but I wanted to ask about the gloves here, before navigating away. My disability software plays well with KZfaq, but I am not always so lucky out on the wild wild web, Thank You.

@jarmstrong2843 Жыл бұрын

To repair screw holes or unseen voids I fill the holes in small steps with baking soda and then add CA glue. After the mixture has hardened, I can drill a new hole for a screw or fill in an unseen void and sand smooth. This mixture makes a very hard and strong repair. It can be used to repair, wood, plastics, fiberglass and even metals.

@MD-en3zm Жыл бұрын

It’s helpful to use a block plane set to a very fine cut to remove the ca glue blobs first so you don’t end up with a valley in the wood. Sanding is less selective.

@JOSEPH-vs2gc Жыл бұрын

Do one about Hot glue guns, i have a crude reading table for my bed what's literally being held together with hot glue. those things are also amazing, i was careless with one corner as it loosened and used CA glue to fix it. lol.

@ConstrutorMusical Жыл бұрын

I'm a very big fan of CA glue. One thing I suggest is to always speak about the dangerous vapours that the CA glue releases... It's very problematic, specially for people with lungs problems. Great content, as always.

@A6Legit Жыл бұрын

Heck, take a whiff and you should be aware that its not great to breathe lol

@YTubeSDD Жыл бұрын

Can you run it through a planer if you overfill a crack with glue?

@stephendonathan6782 Жыл бұрын

I use the CA to tighten up knots in the wood. Most of the time the knot won't give you a problem if you do that.

@A6Legit Жыл бұрын

I just use regular wood glue

@stephendonathan6782 Жыл бұрын

@@A6Legit the thin ca glue goes in deeper tho

@A6Legit Жыл бұрын

@@stephendonathan6782 true if you have a real loose/deep knot.

@contessa.adella Жыл бұрын

I have opened (but capped) CA in the fridge that still works as expected after ten years (at least). Tube Epoxies too. Store some in a fridge, you’ll be surprised how long it retains most if not all of its properties. Why are all WW channels addicted to ‘accelerator’ with CA? You do know regular CA sets in seconds anyway, especially on wood (and skin) without fancy, cost adding sprays!

@johnhill8958 Жыл бұрын

Are those gloves poly ethylene gloves? I have never heard of poly thyrine polymer before.

@tennentssuppa Жыл бұрын

How do you stop the glue drying in the nozzle?

@tfwoodcraft Жыл бұрын

do they eventually dry without using the accelerator ?

@A6Legit Жыл бұрын

A more appropriate name would be catalyst. Accelerate aka go faster. Its not required to harden the glue

@squarelevelplumb Жыл бұрын

Does the viscosity of the CA glue, affect the drying time. Thanks

@A6Legit Жыл бұрын

Thinner dries faster but i couldnt tell you how much of a difference there is. If its a concern thats what accelerator is for

@JM-sz4oi Жыл бұрын

How about epoxy to fill voids? Better/worse than CA? A contrast would be helpful. Enjoyed, thanks.

@A6Legit Жыл бұрын

Im guessing epoxy is better. Thats what I plan to use on smaller cracks

@A6Legit Жыл бұрын

I was watching stephen ogle video earlier about filling bowl cracks with epoxy. He said matthias wendel did a video comparing glues and epoxy to fill cracks. Supposedly epoxy did best. Depends how big the void is I guess. If its just a hairline I'd probably use CA, bigger id go epoxy.

@williamwilson3145 Жыл бұрын

I use another brand of ca glue.Would the activator that i have work with starbond? I guess my question is are all activators the same?

@A6Legit Жыл бұрын

Most likely yeah. Theyre all meant for CA glue. I got different brand activator cause it was cheaper

@williambranham6249 Жыл бұрын

CA glue sets in the presence of moisture. Accelerator an unnecessary expense unless you are doing production work.

@A6Legit Жыл бұрын

@@williambranham6249 Its worth having for gluing odd stuff. Rather not sit around a few minutes holding something in place.

@jimclark7085 Жыл бұрын

how do you keep tip clear of glue

@carlarellano629 Жыл бұрын

What type of gloves? I can't find polytsyrene, or polythyrene gloves anywhere.

@A6Legit Жыл бұрын

Poly-ethylene. Basic food prep gloves.

@LewHarriman Жыл бұрын

Great info Colin, but I need some help.... but where on earth can I get those polyTHYRENE gloves that you mention? PolyETHYLENE gloves are widely available. But no matter where I search, I've not been able to find polyTHYRENE gloves. Was that maybe a typo? Did you mean to say that polyethylene gloves are safe for CA glue?

@A6Legit Жыл бұрын

As far as i can tell thyrene doesnt exist, as a compound anyway. Theres some supplement by that name but 🤷‍♂️

@geolisadrag-racing2349 Жыл бұрын

i saw a video of Colin's, a very long time ago, that mentioned the kind of gloves he used with CA glue; but i was never able to locate the reference again. I was so excited to see this updated CA glue tips video, and I made sure to screenshot the gloves type when shown in white on the screen. But, like you, I cannot find Polythyrene Gloves. I hope Collin sees our comments and helps us out Lol. He is always great about responding to questions. I am also going to read the article linked above to see if the gloves are mentioned there by another name. Thanks for letting me know i am not the only one looking. ~ 🛠Lisa♿

@ronaldmodesett8579 Жыл бұрын

i just use the paint sticks you get at your local box store

@HBSuccess Жыл бұрын

If the cracks are big enough don’t use CA at all - use epoxy. Regardless of what you use to fill a big defect don’t sand at all… CA and epoxy are both harder than most woods, save for a few exotics. So use a plane and/or a cabinet scraper to get it flushed up.

@rickessegern1920 Жыл бұрын

Wear a respirator when using CA. I have to wear a full face one or I'll sneeze for 3 days after.

@williambranham6249 Жыл бұрын

I had a bad experience after many years . I left a similar safety tip above.

@ffff1758 Жыл бұрын

Don't talk about what you don't know! Polyethylene is de propper word!!!

@theduftmeister Жыл бұрын

Honest mistake ff ff

@Bryan-zz7xc Жыл бұрын

🙈 ᴘʀᴏᴍᴏsᴍ

@themeat5053 Жыл бұрын

Really you like working with them so much is because you get them for free.

@unwired1281 Жыл бұрын

Same reason haters hate. It’s free.

@A6Legit Жыл бұрын

Personally I'd use almost anything else before CA glue because its so expensive.

@williambranham6249 Жыл бұрын

@@A6Legit If time is important then I use CA glue. 🤭Otherwise I use yellow wood glue with clamps , turn out the shop light and head for the recliner.

@A6Legit Жыл бұрын

@@williambranham6249 Same here. I only got CA glue for live edge bowls, and maybe filling some small checks in wood. CA has its place though, just like epoxy. Dont always need it but when you do it comes in real handy