Check out the local prices and availability in the LEGO Online Shop - racingbrick.com/product/10330-2/

As much as it's a bummer that the rear wheels aren't as wide as they're supposed to be, it's good to see that LEGO is taking steps forward with actually making smooth tyres this time!

Size of rear wheels is a joke.

For the 1x1 prints, there's also the fact that they are non-obvious prints, so having all white 1x1s have the print makes the build easier because there's no chance of using the wrong one

4:05 I believe the Shell pieces are printed because they get partially covered by that piece of the nose cone at 4:20. Lego were probably worried a sticker might cause clearance issues or get damaged by the piece on top

An ‘Icon’ set that is actually iconic! Shame about the wheels, didn’t notice it at the reveal

I wonder if Balázs will pimp up this set with 3D printed rear wheels. I bet he will.

The other reason they include only printed 1x1s for the engine cover bag is that they don't want to let you make the mistake of choosing the unprinted 1x1s for the bit that requires the printed ones, and to only realise after you've buried the printed ones into the assembly itself. This is the same reason why set 76906 (Ferrari 512M) contains 6 of the printed 1x1 plates when only two are visible when built. This is one of those building-experience-trumps-price moments that LEGO is good for.

Actually rear wheels are exactly 50% wider. 25x10x13 front, 26x15x13 rear

It’s funny how other companies like CADA can make larger rear slicks and separate from the rims too, there’s should be no reason why LEGO can’t do this properly.

Yes you're not allowed to have tobacco branding on items classified as toys. Also, the Mp4 4/4 did run at some GP's without tobacco branding as it was banned in certain countries even back in 1988.

I'm really surprised they didn't go with the wider rear tires as well. They already have the new suspension A frames, with wide rear tires that would allow them to make a whole range of more modern F1 cars for the Icons line, like one of Schumacher's Ferraris from the early 2000s or one of Hamilton's Mercedes' perhaps.

Im a huge f1 and Senna fan, but Lego didnt do this car justice, the rear, the front, its all just wrong. Even his helmet. Definitely disappointing.

Major problem is not the tire size at the rear but the croocked front nose. I still can't believe how they couldn't recreate a fully straight profile, looks like the front nose is about to fall off, too bad! Also the engine cover under the airbox is definitely too bulky and of course, as you mentioned in the video, those rear tires are too narrow...Anyway just the minifigure is totally worth the set!

Other than the failed rear wheels still a nice displayable set. Builds a lot bigger than expected given the price piece and the scaling is great with the other cars in the line up. Nice to see functional steering on a smaller model.

You don't know how much I was waiting for this video, finally it is here!!!

I believe that the feature that makes taking the wheels off or putting them on the car "faster" than usual refers to the action of changing tires/wheels on F1 pit stops in real life

Yes! First review of the new cars!!🎉❤

i wish they could just spend a minute or two delivering a wider wheel design

I wasn’t a huge fan of this set at first because of the smaller scale, but honestly? I think it’s won me over. The pricing is decent and the build looks really fun! I’m not even an F1 person but I probably will be getting this day 1!

Would the tires work better on an RC drift car MOC than LEGO’s normal, more rubbery tires?

Thanks for the review. I’m definitely picking this up

Just got it! Cant wait to build!

do you get anything special for pre ordering this set? ordered it a few days ago but just wondering if there are any real benefits to the pre ordering

The suspensions are really interesting!

I think they covered the one by one studs so all the one by one studs are the same so you don’t don’t mix them up and have to take the whole thing apart

I have already pre-ordered it. I can't wait for your solution to fix those rear tytes

As a Senna fan and a fan of the MP4/4, which was Sennas first Championship car, I have naturally ordered the set already. I have several model kit sets of this car, including the Kyosho/DeAgostini 1/8 scale :) As a side note, not all races approved of tobacco commercials either.

This is a really good looking set. It is something different in the lineup, as this is truly one of the most iconic formula 1 cars in the history. Ayrton Senna was truly one of the most iconic formula 1 racers of all time. I am still trying to find a good deal here in the U.S. for one, as to me, it is just a bit overpriced (even though the silver pieces aren’t cheap to make, good amount of prints, legendary Ayrton senna mini-figure, and the new pieces). Thanks for another great review!

I agree with you, the rear is an insult.

Such an exciting set but the issues with the rear wheels and the nose make it a sad but very hard skip

I think they really dropped the ball on this one, the rear wheel size is horrific. Car just doesn't look like the iconic Mp4/4 and more like F3 or something. Shocker.

My biggest gripe with this set are first: the buckled nose cone, and secondly the rear wheels. Concerning the Marlboro branding on scale models: usually decals are included, but not always shown, so that the car can be made realistic, without needing to advertise the model with tobacco manufacturers.

Looks amazing, will definitely but It in a future

Can you 3d print the back wheels in there "real size", to see how it would look?

If I'm luck enough to get this, I'd definitely be looking for a rear wheel upgrade. Also the colour scheme - Have they made the red parts on the nose deliberately different to the real thing to look less like tobacco advertising?

black half bushings would be nice, or some other alternative for that. and having the suspension not..suspense is an interesting choice. even if it didn’t flex, having them be less parallel (forced by the cross axles) is a bit unfortunate

This is a fantastic model, what a great tribute to the man Ayrton Senna … Can’t wait to hear the fix for the rear tires

Szia Balázs! Nice review as always. I agree that the tire details could have been more accurate, but it most likely won't be a dealbreaker for hardcore F1/Senna fans :)

Hopefully, someone makes a if it doesn't exist already a minifig sized version for obvious reasons.

Those back wheels are huge

You are right it could be better. For those wanting a more realistic mp4/4, Tamiya have it in a model kit if you are up for the challenge.

In both cases, the speed champions and this icons set, the tires are a bit too small and thin. But overall it's a great build

I'm way more annoyed that those new suspension parts don't feature a 2l hole, or at least a 2l axle-hole, than I am that they didn't mould 2 different new wheels.

the speed they are mentioning in the set is related to a modern f1 race pitstop, where they remove and replace all tires in under 3 seconds!

Does the mini fig enter in the seat

I already preordered the car knowing the rear wheels are going to be a visual issue for me. I've heavily debated 3d printing a new wheel/tire to make it look more complete even though it won't look as good as Lego.

Lego would never do it, but it's just not the same without the Marlboro decals.

My question is where do you keep your speed champion...???

Are you gonna review the speed champions? I’m assuming you’re still under embargo?

I really really have waited for the 42171 review

Once I get the set delivered, im probably gonna get my friend to 3D print some bigger rear wheels to make it look more realistic

Looks ok from a distance and perhaps they could only make one mold for the new wheels. The printed piece on the nose looks wrong as it should be a V shape.

This was the first thing that I noticed when they announced it at first. Why are the rears so skinny ? Like I know they are wide, always were

Does your fixing of the rear tire by any chance include the use of liquid resin? :)

As some who's spent countless hours looking at reference photos and scale models of the MP4/4, the nose is embarrassing and possibly the worst possible way to do it. The wheels are also a joke, they chose to give us 4 front ones instead of going for a middle ground.

Is it me or does the engine cover look like a great start for a space shuttle?

Like the set but real sad about rear wheels. Is it possible to buy bigger wheels?

Beautiful lego kit if I buy it, I'll try to make an assembly video!

I'm fairly sertain I have heard that Lego only allowes for each theme to add 2 new parts per year (might be diffrent for diffrent themes as they sell more or less set or not) buty it might be the reason that they couldnt make a larger tyre for the rears.

I plan to gift this set to my dad on easter since he is or was a big F1 fan. However the rear tyres bug me a bit since it shall be a proper display set.... I wonder if there are people who will give online tutorials to 3d print own ones or have alternative pieces that already exist that I could buy. I wanna gift my dad something but uhh dont want to disappoint him with smth inaccurate.

As much as I hate the rear tires, I’m definitely picking up this set

Not a fan of the shiny tires. Might have to take some fine sandpaper / scotchbrite to the treads to make them look race-worn.

Such a shame about the rear wheels. So much so, that it puts me off getting this set. Id never get over it.

the funny design on the front nose, made the car looks like a racing damage version.. Haha

Yeah, I can't look past those rear wheels. I might even display it without the wheels because the wishbones look good now

As an F1 fan and someone with an immense amount of respect for Senna, this was overall a pretty cool set, sure its not perfect, but I think the tyre thing isn't a huge issue to me, and does a pretty good job at commemorating one of, if not Formula 1's best drivers ever

No tobacco advertisement is an EU law. From my understanding, you can't even race/display the classic cars with any type of tobacco branding. I think that's a bit ridiculous. I can see not allowing current cars to advertise, but certain cars are tied to their branding. Rothmans 956 is a good example.

The lack of width of the rear tyres is bad, also I don’t like the fact the shape of the print above the front axle is wrong (I can almost forgive print quality). Still getting it though

1:46 Truly a car with a heart of a brazilian

Why didn't they print red on white for the front? In what setting is it ever better to print white on red?

Super fast to remove and reattach is a nod to the pit crew that perform tyre changes during a pit stop.

It’s your saving. A wider wheel on the read would mean two molds and less quantity per tire! Pure and simple, less cost more margin!

looks cool but the rear tires look weird

I might get this if I find the period correct decals. And the right helmet.

Why no blue line on senna’s helmet?

I got too see all of the new sets in person (and the bmw too, but not the audi and mustang) They are really cool in person, I would defiantly buy, especially since they reduced the price of the double speed champions, and for the new bmw, it's 30 dollars instead of 40.

Love easter eggs about Brasilian flag represented inside the car. Like if it was the heart of the car ;-) Saddly, printed nose element seems to be not "totally" white isn'it ? And clearly, biggest mistake is the rear tyres. And i think it is more evident due to the rear wing which is prominent : so it looks like more as a Forumla Renault than a Formula 1 on this point of view 😕 Great review as usual !

It’s a Formula Campus Senna addition… Still kewl…😍

@ 6:17 Is a little pun/reference to a pitstop

Looks like the store you kindly linked doesn't ship to the UK. Shame. I will wait for a brick link mod with better sticker sheet before purchasing I think. How could they also miss the iconic 45 degree integration of the white to red on the nose cone. That is as stand out as the skinny rear tyres in my opinion. Now if only they did red 5 and the Porsche 917

0:00-5:32 - perfection so far.

Is this part of the creator expert/Icons car lineup with sets such as the porche 911 and the Landrover defender.?

cant wait until they use those wishbone parts for a proper Indycar build as well. Im sure someone will make them functional down the line.

Odd that some of the new sets have moved to paper bags and others haven't... indication of how long some have been in design/production?

I think, i will go get one next time. ❤

With this set Lego started a new themes ❤, Hope next video gonna be 42170 or 42171😅

I give it a good 8 for the try, because all in all it is a good set, but it should cost 30 euros less. For that 80+ euro cost, you should have made way better set what we got.

6:15 - maybe a faster pit stop? ;))

I found out how to make the wheels bigger purchase 2 more and by more Axel's and it looks pretty good it is the right size as well

love it . butt i dont like the the mistake of the back tire.s and malboro reclame

Hmmmm mabye some drag car wheel on the back would look a lil better?

Doesn't the reference in the manual to the speed of removing the tyres refer to real life F1 tyres where the wheels are all integrated, rather than having a tyre that is added to the rim? Setting aside the size of the rear wheels, the actual composition of the one piece tyre is more accurate.

this is good set (im waiting w14)

A great looking F1 car but please put wider wheels on the rear like the OG F1 car.

Looking back, the years ago creator series ferrari f-40 just done so much right in the first time, they should get that designer to do this...

Lego knows that people will thirst for more accurate tires for the next Icon cars which will keep us Lego addicts eagerly awaiting the next set I think. It’s good marketing, if they’re thinking the long game. Pure hypothesis. I know I might be wrong. Haha

I’d have loved to buy this set but man the rear tires…it just fails to represent the car’s look in a way I want. I’ll get that off-road buggy instead instead because it’s cheaper with more functionality but I definitely liked this set better.

Nostalgic moment when you can see again Shell logo on a Lego set

I would have bought this for sure if they got the rear tyres right. This is a MAJOR oversight by Lego.