Рет қаралды 6,911
In this video I am trying a new technique of a resin bloom. I used Lets Resin 1:1 casting resin of 16oz. After mixed it was left to sit until it reached a temperature of 40 degrees celsius. I decanted a portion of 60ml for the white blend into a separate cup. For the white bloom mix I used 5 drops of Castin Craft white and 5 drops of Lets Resin white alcohol ink. After the clear portion reached the desired temperature it was decanted into the mold and any bubbles were removed. I then added a center of a solid plastic red heart and surrounded it with red AB crystals. I chose to make my petals with the white resin using the cup versus a piping bag. I poured my petals throughout creating a flower design. this was left to cure. I then added a color layer using the Lets Resin 1:1 casting resin mixed with 10 drops of Castin Craft red, Lets Resin mica powder rose red and tiny bit of dark purple. #resin #epoxyresinart
---------------------------------------------------------------------------------------------------------------------------
PRODUCTS USED IN THIS VIDEO
RESIN
a.co/d/crr66Gm
PIGMENT PASTE
(red) a.co/d/5ZpteNO
(white) a.co/d/17QlWQB
MICA PODWER
a.co/d/3PFSgy3
MOLDS
a.co/d/1pueAKg
#resinart#resintutorial