A Warning To All Men (EAST COAST)

Рет қаралды 238,151

3 жыл бұрын

Many of our videos are comedic & satirical & not intended to cultivate antisocial or unlawful behavior. Thank you for supporting our Channel through the below affiliate links. No price increase for you but we may receive compensation.
-Amazon - our store - wranglermart.com
-Jk Boots - www.jkboots.com/wranglerstar
-Radios Made Easy - radiomadeeasy.com/product/wra...
-Amsoil - www.amsoil.com/c/products/1/?...
-GoDark Bags - godarkbags.com/#cody411
-Premier Body Armor - www.premierbodyarmor.com/wranglerstar
-Vertx - shareasale.com/r.cfm?b=228804...
-My Patriot Supply - www.preparewithwranglerstar.com
-Eden Grow Systems - edengrowsystems.com/wranglerstar
Become A Wranglerstar Member For Exclusive Content and Perks
/ @wranglerstar
SUBSCRIBE: bit.ly/2btWfQR and turn on notifications to get them
#Proho #wranglerstar

Пікірлер: 1 200

@HAXMAN 3 жыл бұрын

"I" Not bad for a West Coast man. We East Coast men couldn't settle for that bracing system. Broke my heart to see that. 😂

@JohnJohnson-hk7cj 3 жыл бұрын

Agree, man that’s such a cool bench but wtf the cross bracing is an afterthought and looks like it!

@crashoverride93637 3 жыл бұрын

I mean it's a rustic bench I assumed it was going to be tenen stringers same as legs

@plaurella 3 жыл бұрын

I’ll bet we get a video in a few days about him doing that bracing a proper way. I think that will bother him with time and he’ll have to make it look right

@HAXMAN 3 жыл бұрын

@@plaurella I thought the same thing. 😄

@zacharyriley4122 3 жыл бұрын

I didn’t wanna say anything...

@seagreenspiral 3 жыл бұрын

I agree. My grandfather was born in Germany, everything he built was solid and still around today! 1927-2007

@bethanyb4478 3 жыл бұрын

My grandfather was technically born in Germany, but he grew up in Brooklyn. He put in a counter on one wall in our house with four braces across approximately six feet. To quote my mom, "you could dance on it."

@shaunroberts9361 3 жыл бұрын

Nice work Cody

@DerInterloper 3 жыл бұрын

Ah, Deutsche eh. Wie Gehts?

@stefanstache7014 3 жыл бұрын

Mir geht's gut!👍😁

@RS-mu9er Жыл бұрын

My Dad is half german. Over engineered everything he built. Nothing ever broke or wore out. But lord help you if you needed to move or change anything he made, impossible to take apart.

@stevenlavimoniere 3 жыл бұрын

EAST COAST MAN WOULD OF PUT THE LEGS ON BENCH THE RIGHT WAY .. WITH NO BRACES

@kfin45 3 жыл бұрын

Why would you wear gloves, can't figure it out

@atch_n_sons 3 жыл бұрын

Aint easy being cheesy momma

@kennethskirvin469 3 жыл бұрын

It’s Steve! This made my day!

@carlzirk 3 жыл бұрын

The plumber with the best accent! Good humor, too.

@TheKrayusKorianis 3 жыл бұрын

@@kfin45 What're gloves?

@wiggledytoes 3 жыл бұрын

"need to sharpen that chain if it takes 3 minutes" - east coast guy

@Tony.Tony.Tony. 3 жыл бұрын

Haha You win the comments!

@mattcorriere9039 3 жыл бұрын

Do you feel free? Pay more than 50% of your income in taxes of every type. Need to ask permission to build on your property. Government decides who is an essential worker or business. Stay in your house for a year so you don't catch a cold. Yea freedom is great, just wish we had some.

@fruitsyfarms5115 10 ай бұрын

@@mattcorriere9039yeah well we lost the war to the Federal regime 🤷‍♂️

@thesmallwoodlot433 3 жыл бұрын

As an east coast guy,... the only thing I’m worried about is.. that saw in your hands!😂🤣😂🤣

@notubenick 3 жыл бұрын

Speaking of saw, what about his "lucas"???

@thesmallwoodlot433 3 жыл бұрын

@@notubenick same applies😂😂😂

@thesmallwoodlot433 3 жыл бұрын

@@Jamesjghome don’t say that...it seems that what ever the left coast does, the right coast follows! Especially in politics and laws! For instance look at some of the laws in California, about labeling, anything more would require a book on a bottle of water about how harmful the container is and possibly its content!

@jozefdabrowski6463 3 жыл бұрын

This man is very opinionated!! makes good content. I still watch bc he does know alot about a little. Vermont will stay on the east coast away from liberal nonsense going on over there 😉

@davidparadis490 3 жыл бұрын

We east coast men prefer the term "Right Coast"...

@RefinerSimilitude 3 жыл бұрын

I think the biggest problem you had with keeping the mill running, in previous videos, is that you didn't have your East Coast thinking cap on.

@mattjewett4473 3 жыл бұрын

My grandfather (bless him) built everything out of rusty spare parts, used screws/bolts and never threw ANYTHING away.

@ETsizzle 3 жыл бұрын

Sir? Is that you?

@mattjewett4473 3 жыл бұрын

@@ETsizzle hmm,...maybe. give me a hint. Knightsofapollo?

@ETsizzle 3 жыл бұрын

@@mattjewett4473 You share the name of my LT while I was in the 1/23 inf... Good man... Good Name...

@mattjewett4473 3 жыл бұрын

@@ETsizzle Oh wow! glad he didn't besmirch the name-I try not to.... Thanks for serving, I appreciate you guys.

@1TEDSong 3 жыл бұрын

I'm from PA, don't know if you consider me "East Coast", but I wasn't scared of your medium sized chain saw.

@kegankirkpatrick2688 3 жыл бұрын

Yeah that’s easy coast

@palabrajot505 3 жыл бұрын

@@kegankirkpatrick2688 The coast of the Delaware River?

@1TEDSong 3 жыл бұрын

@@palabrajot505 Where the Monongahela and the Allegheny rivers meet to form the Ohio river. Pittsburgh

@James-ck7fv 3 жыл бұрын

i'm from virginia and i wan't scared lol

@likes-yv3lj 2 жыл бұрын

Shout out the best city 💯 Pitt

@Jimmy_in_Mexico 3 жыл бұрын

"I" like your bench. A southern man would have done some things differently. But I understand that you're being as manly as they allow out west coast style.

@bethschuler463 3 жыл бұрын

Jimmy you are exactly right!! Josh

@nonamemcgillicutty9585 3 жыл бұрын

Yea this guys a joke, wouldnt last a second down here lol

@0987__ 3 жыл бұрын

😂

@dedduck87 3 жыл бұрын

Don’t worry us east coast men left the room when you put those cross braces on that beautiful bench. Yikes! Lol

@dancearoundtheworld5360 3 жыл бұрын

I think the legs are ugly

@brandonramon3278 3 жыл бұрын

Some thin cable and turnbuckles would have been a nice touch.

@rokko1448 3 жыл бұрын

If he wouldn't tell you about angle Installment I beet you would be left without words. 😝✌️

@tyler755 3 жыл бұрын

Your grandfather's can is from DuPont... a staunchly East Coast company. They're incorporated in DE, but Mr. DuPont found his home in Pennsylvania :) Little history tidbit for you, Cody!

@J1I9M7M4Y 3 жыл бұрын

By a FRENCH.. 😁

@tyler755 3 жыл бұрын

@@J1I9M7M4Y monsieur dupont, then :P

@J1I9M7M4Y 3 жыл бұрын

@@tyler755 👍😂

@bobbymorgret 3 жыл бұрын

Says the man that lives in the "manbun" capital of the world (the west coast) Hahaha!!

@charleycomo5388 3 жыл бұрын

That’s a cute saw!!! I think my grandma uses that for trimming her trees (we live in Virginia)

@danielfield3580 3 жыл бұрын

Hahahahaha

@THEMADPROFdj 3 жыл бұрын

We use that model here in Charlottesville to slice soft white bread. Never for anything tough like rye though.

@charleycomo5388 3 жыл бұрын

@@THEMADPROFdj I live in Mechanicsville

@MichaelAndersen_DK 3 жыл бұрын

You mean trimming her toe nail? ;)

@seangriffin7841 3 жыл бұрын

On the east coast your what we call a weekender.

@boomerisadog3899 3 жыл бұрын

You're * If you're gonna represent the East Coast, try not to make us look illiterate.

@jordanroberts3007 3 жыл бұрын

@@boomerisadog3899 Smart feller with all the dah book learnin.

@svictor7573 3 жыл бұрын

As an East Coast Guy I would have used White Oak which is naturally water resistant, closed pored , it doesn't have a "series of tiny straws"

@redrover1565 3 жыл бұрын

and, here in Oklahoma, if given the choice, I would go with bois d'arc ( Osage orange, hedge apple, horse apple, etc.), which will outlive/out-weather white oak or post oak by a century or two. I've used 100+ year old fence posts for tool handles and a few small turned bowls...just never use it in the fireplace.

@Taudlitz 3 жыл бұрын

@S Victor sorry to disappoint but it does, that is the system that get water from roots to leaves. Every tree have it.

@UltraMagaFan 3 жыл бұрын

You would cut down a white oak? That's sad they are endangered and they take an extremely long time to grow.

@jarodjardine8382 3 жыл бұрын

@@redrover1565 It's one of the best woods for making traditional bows aswell, wish I lived in the natural growing area, got none up here in eastern canada haha

@Captain_Jackass 3 жыл бұрын

This is just a really wholesome channel in general. Love your videos, and unfortunately I'm not in a financial situation where I can afford to be a member right now, but as soon as I am I'm becoming a member again!

@sixtomidnight1492 3 жыл бұрын

I think we need a proper cross bracing episode. That beautiful bench deserves better!

@MrHotchickens 3 жыл бұрын

Solution is simple... Re-bore the legs located appropriately set back from the ends on the correct rake and angle. This project crushed me!! "I" give Cody 3 weeks (of unfortunate abuse) before he modifies the bench! Let's just hope he does it the right way!

@Taudlitz 3 жыл бұрын

quick and dirty, thats the proper west coast way :-D

@MrHotchickens 3 жыл бұрын

@Jon Doe it's not always about how it looks but how it works... I can assure you once he hits his shins a few times the ideas and motivation to make the appropriate improvements will come flooding back. BTW.. no discredit here... CODY HAS MORE MOTIVATION ON ANY GIVEN MONDAY THAN I OFTEN EXHIBIT OVER A MONTH!

@waynegilchrist1596 3 жыл бұрын

I am amused by your " East Coast Man" ribbing. I am from Louisiana in the Deep South and I like a Beefy Bench and I like my Big Boy Bar on my saw too. I hope we can all keep it friendly and light hearted, I hate to see friendly intentions become nasty insults. Have a blessed day everyone.

@mrniceshoes2118 2 жыл бұрын

Amen !

@craigmcmullen231 3 жыл бұрын

I got the fizz!! Sure wish we had trees like that in Pa! Wonderful workbench!

@brahtrumpwonbigly7309 3 жыл бұрын

My fizz was degraded by those crossbeams, but it is an awesome sturdiness that comes with the homely look. I got it all back though when you planed the working surface and hit the corners for a perfect 45 degree chamfer. Nothing gets me going more than cleaning up a rough surface and giving the workpiece a proper edge break.

@jaredboyd4578 3 жыл бұрын

Fun series! Thanks for bringing us along

@electb 3 жыл бұрын

It seems the West coast man took a great looking bench and diminished it with those shabby looking braces.

@daviddeupree7707 3 жыл бұрын

I. Thanks again for taking us along for the ride. All the best from Northern California

@CarlosPerez-ex3ku 3 жыл бұрын

The east coast -west coast beef is greater now than when Biggie and Tupac were alive.

@stephenpena7813 3 жыл бұрын

Who do you think killed them both?? 0_0 he lives out in the middle of nowhere for a reason! Lmao

@charleypearson2314 3 жыл бұрын

Doesn't matter how big his saw is, if his wood is never hard!

@catspaw3815 3 жыл бұрын

cutting pine is hard! (for a west coast man)

@machinist7230 3 жыл бұрын

@@catspaw3815 of course it's hard, it's not like they any experience with actual wood!🤣👍🌳🪓

@kaceesavage 3 жыл бұрын

😂😂😂

@KRT045 3 жыл бұрын

Is that what they were singing about in “America the Beautiful “ For purple mountain majesties Above the fluted planes.

@jeffcook3501 3 жыл бұрын

Exactly where my mind went. I'm concerned for us...

@KRT045 3 жыл бұрын

@@jeffcook3501 😂

@roncryderman4675 3 жыл бұрын

Great outdoor bench. I use a huge wooden spool used for cable. Very solid and about 3" thick.

@Will7981 3 жыл бұрын

I for that bench. It definitely gives me the fizz as well.👍🏻 However as an East Coast man, I prefer Husky chainsaws with 20" bars on them. It's been my observation that the folks over at Stihl suffer from a phenomenon commonly known as "little man complex" and to compensate Stihl likes to send their saws out with abnormally long 36" bars.🤣🤣

@ront8261 3 жыл бұрын

Same here; Husqvarna 455 Rancher with 20" bar; runs all day, all year; non-ethanol gas is how I do that.

@Rob-C 3 жыл бұрын

I like to stand up and buck. Only get one back

@mattbaker651 3 жыл бұрын

I like my 372xp husky with a 32" bar 3 pulls in the winter and she's warming up. Always tell a stihl guy because their pull arm is twice the size from pulling a hundred times

@huntersimmons885 3 жыл бұрын

@@Rob-C Stand up and Buck!✊🏼

@patrickmcnair1965 3 жыл бұрын

As the great Buckin billy ray said stand up and buck! now go get a real bar

@CPMJunkRemoval 3 жыл бұрын

That’s funny! No worries here! Getting my Lucas Mill fixed up for this year, just put my order in at Baileys. I’m on the Georgia coast so it will be a few days...

@CPMJunkRemoval 3 жыл бұрын

I love my 461

@WorkingTimbersCo 3 жыл бұрын

Ha ha, coming from a west coast guy working in what looks like dress shoes! 😂 Something an east coast guy Might do. I dunno, I’m in the south. Don’t have a dog in the fight. Great bench man!

@pmccoy8924 3 жыл бұрын

Slippers.

@THEMADPROFdj 3 жыл бұрын

West coast?...Birkenstocks!

@THEMADPROFdj 3 жыл бұрын

...with socks.

@evan7mcnabb 3 жыл бұрын

I like your 10 to 15 minute videos. I stay very busy and don’t always have time to watch the longer ones. Thanks for sharing this.

@juantransportador 3 жыл бұрын

👍HELLO from las Vegas Nevada, yes that bench gives the fizz, thank you for the video and GOD BLESS YOU AND YOUR FAMILY.

@trackrunner11 3 жыл бұрын

You should level it only after placing something flat and strong underneath .The soill underneath is too soft.

@TheCancelCult 3 жыл бұрын

Placing a 400 lbs. work bench with peg legs next to a river in the PNW and expecting it to stay level (or not sink) seems....like someone is high on more than the fizz. Must be West Coast logic.

@advorsky1 3 жыл бұрын

Well we can all get a sigh of relief when the creek comes out of its banks he won’t get a splinter on his new canoe!

@NateK9132 3 жыл бұрын

Aye. Nice looking bench! It gives me the fizz for sure.

@MrTanker6 3 жыл бұрын

Something I use to try and prevent my tools from rusting is toolbox dehydrators. They are larger versions of the little packets found in electronics. Some have indicators indicating when they need to be dried out which is as simple as putting them into an oven. Special plane socks can also be slipped over your planes with some of the smaller silica packets.

@udavidism 3 жыл бұрын

All you need to do is move the legs in off the end a few inches and drill the holes the way they should have been to start with. Plug the unused holes if you want to or just leave them. That would look ten times better than what you have and be very sturdy.

@Bjorn308 3 жыл бұрын

"A waring to all men (EAST COAST)" - ah man, I thought you were gonna teach us to forge our own axe heads or something... Jokes aside, hope you're having a good one today. Just finished a new bookshelf I made and man am I happy with it. Now all my books fit on 1 shelf with room to spare. :)

@jeffcook3501 3 жыл бұрын

That's awesome, but I think you need to build another shelf so you have an excuse to buy more books. Also, because I realize that anything written has no voice inflection, I'm actually not being sarcastic, I just like books. I also wish I had more time to read them...

@Bjorn308 3 жыл бұрын

@@jeffcook3501 - same. I'll build another once I have the cash for more wood, current shelf takes up 30 x 10 feet of space so I still have room for quite a few more as it is but I'll most def make another for my den.

@77perudo 3 жыл бұрын

LOLOLOL.. im an east coast man.. NJ.. that east coast comment just cracked me up... great work.. love your channel..

@kennybob52 3 жыл бұрын

Coming along awesome. Blessings from Texas

@TheArtofCraftsmanship 3 жыл бұрын

“I”

@PLE594 3 жыл бұрын

Hey Cody do you think you'll build a little covering so you can work in the shade? Good video, I would love to see how your new outdoor work space comes together. Have a great day.

@kane6106 3 жыл бұрын

I, very excited by this bench. Feels super authentic for some reason.

@mattpage9826 3 жыл бұрын

Looking great! I'm putting one up that is about 12' next to my shed. Your videos are a treasure.

@guycanada1944 3 жыл бұрын

PLEASE RE-DRILL those leg holes at the right angle so you don't need the cross beems. The legs don't need to be right at the ends of the bench and you won't be able to see the mistake because its at the bottom!!!

@jamescrow8822 3 жыл бұрын

Know what an East Coast Charlie and a West Coast Dandy have in common?....... They both can't hold a candle to a Midwesterner 😋.

@dejavu666wampas9 3 жыл бұрын

This!

@donaldeverette6498 3 жыл бұрын

Frog SNOT!🔥🔥🔥🔥

@fruitsyfarms5115 10 ай бұрын

BS!

@christophercrews301 3 жыл бұрын

As an east coast man, I fear not. I've enjoyed your videos for the past few years now. Thanks for sharing. It's very inspiring!

@victweezy 3 жыл бұрын

I!! Really looking forward to the clamps and dogs part.

@jamesmiddleton6464 3 жыл бұрын

I bought a bunch of silica gel packs on Amazon and put them in all tool storage areas in the garage. It helps a lot.

@danielfield3580 3 жыл бұрын

I just conditioned my shop area.

@bruhmania7359 3 жыл бұрын

"a warning for east coast men 😠" *spends entire video building a bench*

@MjCecil87 3 жыл бұрын

Nice looking bench you got there! It's coming together nicely. Definitely gives me the fizz

@DerInterloper 3 жыл бұрын

Amazing work and wisdom, God bless!

@Mrgunsngear 3 жыл бұрын

I need that saw 😎

@tommybeatz4678 3 жыл бұрын

Mrgunsngear love your content dude!! God bless you in Jesus name

@CharmandersCrispyTators 3 жыл бұрын

Dude you’re everywhere!

@realfnneato3111 3 жыл бұрын

East coasters need not apply

@inukinukshuk5956 3 жыл бұрын

Question from an East Coaster, why did you use softwood as your bench instead of something like maple or oak?

@jonathangreenshields7202 3 жыл бұрын

They don't have hardwoods out west

@inukinukshuk5956 3 жыл бұрын

@@jonathangreenshields7202 softwood and softer men out there I guess (Kidding, the wood is ok)!!!!

@alexanderbertallo1995 3 жыл бұрын

Thanks for sharing and keep up the great work... Much love from Switzerland

@johnr5545 3 жыл бұрын

Love the bench great job

@ronalddavis439 3 жыл бұрын

Dang that was a nice work bench. Braces look hideous. Must be a west coast thing. Ha ha

@johngrossbohlin7582 3 жыл бұрын

It's not too late to splay those legs and possibly get rid of the cross bracing. You could use stretchers across pairs of legs and a single one between stretchers. 😉

@markp.5618 3 жыл бұрын

What gives me the fizz is splaying the legs on the bench outward to begin with and saving the 1×4s for a higher calling. Still, a sturdy bench cant be beat. Plenty of material to plane level when the timber dries and thinks otherwise.

@SWITCH7425 3 жыл бұрын

I like the way you pay attention to detail and the extra effort you put into your projects....wish I could copy such discplined work culture.....👍👍👍 watching from across the globe...in Ndola Zambia 🇿🇲🇿🇲🇿🇲

@jdclay1547 3 жыл бұрын

Hope your doing well @Wranglerstar, God bless you and your family.

@williamemerson1799 3 жыл бұрын

East coast guys and girls use saws like yours as a back up if the big saws break down.

@benf8487 3 жыл бұрын

That west coast Stihl saw of yours would shutter at all hardwood I cut with my Husqvarna! Nice bench though! Might have to make one out of walnut myself. We've had a few come down from the ice storm we had this winter. Thanks for the video, god bless.

@allenstratton5399 3 жыл бұрын

I for sure love the videos Thank you for all your hard work. 🙏

@PLE594 3 жыл бұрын

Awesome been waiting for a new movie :) Great Job :)

@VinnieRed71 3 жыл бұрын

This east coast guy would’ve put those legs on some paving stones or bricks instead of in the ground for them to rot out quicker.

@mattwilliamson1714 3 жыл бұрын

👍🏻👍🏻 I think most professional homeowners would do the same. 🤣🤣 For small stuff, I like to at least a paint can full of concrete... (1/2-buried) to keep the legs up a few inches off of the damp mud (if I can't find a good enough stone). For bigger tools (like the bench & saw) I prefer to use a 1/2 of a 5 gallon bucket of concrete... (flipped upside down after it cures) usually throw a bit of scrap screen, fence, or re-bar in it for good measure & let any fasteners (like J-bolts) stick out thru the center bottom of the bucket (set it on cinder block to cure).

@thomas77597 3 жыл бұрын

Wood does dry out quick on the ends. That’s why I store my 18” rounds East/West orientation for a year before cutting into cordwood. I also think it looks better than a fence.

@brearlymason4903 3 жыл бұрын

Great looking bench but I wish you would’ve used the same lodge poles for the cross bracing.

@michaelmoodie2203 3 жыл бұрын

A “ WARING “ for all men.?! You mean, a “ WARNING “

@patrickmandal5108 3 жыл бұрын

Only real subscribers are here when he makes spelling mistakes before he corrects them.

@kgriff087 3 жыл бұрын

Maybe he meant Waring... Haha. Based on the comments people are ready to throw down lol

@BuildALotAcres 3 жыл бұрын

The river in the back looks nice at least :)

@JackInTheShop 3 жыл бұрын

9:30 Funny I live in NC. I used a Husqvarna 61 with an 18in bar as a daily climbing trim saw for 8 years. That was my small saw.. LOL

@petekleinschmidt4251 3 жыл бұрын

That’s one heck of a bench! Looks great!

@andrewbutler1423 3 жыл бұрын

Cody’s East coast zingers always make me laugh 😂

@coryholman2729 3 жыл бұрын

I! Definitely gives me the fizz

@thoringuidry 3 жыл бұрын

Heck of a bench! I’m always impressed you take the time to make the thing you are going to work off of.

@CarbonPoweredLife 3 жыл бұрын

I got the Fizz! Beautiful work!

@webb-cast1030 3 жыл бұрын

Time for a do over. Cut that top to half thickness. Glue and dowel together to give you a functional working width. It'll be the same weight. Put in some proper timber framed legs and braces. You are very smart and you know this already. This bench is a video trolling project to get comments and repeat views. Heck, you made me comment three times. I get it, that's how you make your living. You knew how to make it right all along. But if you did that people wouldn't have commented nearly as much. Your viewer's would have just thought "Yup, typical Cody craftmanship. Jeez that's nice!" As viewers, we get so used to you doing top-notch work that we expect it. We sometimes forget to comment as a thank you for all the entertainment you have been providing to us for years.

@nellayema2455 3 жыл бұрын

Tomorrow's episode title: West Coast Bear Eats Work Bench.

@bklynlandlord 3 жыл бұрын

I'm thinking West Coast Bear East West Coast Man.

@emersonphillips8887 3 жыл бұрын

Yeah! We have tiny little trees here on the east coast. White Oak and Beech tiny trees. We call them hardwoods and use them to make real benches.

@advorsky1 3 жыл бұрын

Hedge also! At least he won’t get splinters in his west coast hands when that creek below comes out of its banks and he’s using his new work bench as a canoe!!! Hahahahahahahahahahahahahahahahahahahahahah

@mvblitzyo 3 жыл бұрын

beautiful work bench ..

@jstep100 3 жыл бұрын

That was a mighty fine looking bench until you put those braces on it.

@rudysroots2789 3 жыл бұрын

East coast here but getting tired of hearing how superior your woods is.

@jimfrozen521 3 жыл бұрын

he is just playing gee git a grip

@rudysroots2789 3 жыл бұрын

@@jimfrozen521 so am I. Geez get a grip yourself....

@joeyshofner639 3 жыл бұрын

I'm from the Midwest and we get no respect.

@schrinky90 3 жыл бұрын

Look at you cute americans getting all sore over how your wood is superior. Come to australia, the wood here makes your wood look like play-doh 🤪👍

@codycollins4415 3 жыл бұрын

Prayers. Please say a prayer for me and my wife. Thank you

@karsonbranham3900 3 жыл бұрын

I have the fizz on many levels, one from the trolling of the E C guys, 2 from the beeswax, 3 from that nice handsaw you used to trim the bracing, and 4- that is one nice bench!

@theoilman249 3 жыл бұрын

You should have cut the bench in half and thrown it in the river after you installed the ugly bracing.

@ahmadawad8601 3 жыл бұрын

Don’t forget the men that found and freed this country were East Coast men.

@bryanhendrix1113 3 жыл бұрын

"Freed?" This country was built on the backs of slaves and indentured servants and over the corpses and blood of natives.

@septegram 3 жыл бұрын

@@bryanhendrix1113 Thanks! Came here to say that.

@L2FlyMN 3 жыл бұрын

Friendly east & west coast fun, but a Minnesotan would have used the tenon cutting system, to tie in the log theme for the bracing, just at the 4 corners, & not all the way across with boards. 😉🤷‍♂️☺️ A friendly & firm handshake goes out to all my American family from coast to coast, then out to our friends abroad. 😊

@jerrysarabia8930 3 жыл бұрын

Fizzed up, keep up the good work

@ranacherian 3 жыл бұрын

Looking at the comments, i bet he wont speak trumptarism...

@dannyscobee6530 3 жыл бұрын

I’m sure there are several southern west coast guys that would be scared of that saw as well as everything else that is manly!

@chriss1227 3 жыл бұрын

Southwest men deal with bugs scarier than that chainsaw.

@ruppsrealestate8283 3 жыл бұрын

@@chriss1227 like the "men" in LA? Lmao. That is southern west correct? ;)

@broughttoideas 3 жыл бұрын

@@chriss1227 show me something manly out west I’ll wait lol

@JesusFreak1924 3 жыл бұрын

The northern west coast guys aren't so manly either, look at Portland and Seattle

@bugsbunny2357 3 жыл бұрын

You're talking about the swimsuit models in LA

@johne9341 3 жыл бұрын

I Wonderful bench project! Can't wait for the holes and the dogs.

@MrBurns742 3 жыл бұрын

The fluting on the bottom of the plane also makes it easier to flatten the shoe. As there is less material to remove.

@Doombotdude2 3 жыл бұрын

"I" Will you need to remove the bees wax somehow before treating it with the boiled linseed oil?

@cdouglas1942 3 жыл бұрын

No, BLO is for all other surfaces, not ends.

@rjskum688 3 жыл бұрын

Amazing at carpentry. Not so much at spelling.

@catskillmountainliving9440 3 жыл бұрын

Old school Wranglerstar!! Cody talking about boiled linseed oil and melting beeswax.....I love it!

@markknister6272 3 жыл бұрын

Nice bench! God bless.

@RiversInTheDesert 3 жыл бұрын

👋😃

@darkraveg3237 3 жыл бұрын

Midwest guys wouldn't make the mistake about cambering the legs in the first place 😂😂

@Cotronixco 3 жыл бұрын

You could also have brought each 1x4 to the opposite leg, so that you can utilize both sides of the workbench w/o toe kickers. Just need to design a good center joint.