ABANDONED Free Airplane Detail: Can The Grimy Paint Be Saved?

Рет қаралды 255,606

Жыл бұрын

ABANDONED Free Airplane Detail: Can The Grimy Paint Be Saved?
#ammonyc #detailing #airplanes
🚗 www.AMMONYC.com 🚗
CHECK OUT REBUILD RESCUE'S CHANNEL HERE: / @rebuildrescue
⚠ Have a Barn Find, Disgusting Car, or want to share pictures of AMMO on your car...email support@ammonyc.com to reach me.
Second Channel: AMMO STUDIO / @ammonycstudio
IG: AMMONYC
🎮 PLAY THE AMMO DETAILING VIDEO GAME!
store.steampowered.com/app/14...
►CLEANING KITS from AMMO:
WATERLESS WASH KIT: ammonyc.com/products/hoseless...
STARTER KIT: ammonyc.com/products/ammo-sta...
SHOW CAR KIT: ammonyc.com/products/ammo-sho...
PAINT KIT: ammonyc.com/products/ammo-pai...
WHEEL KIT: ammonyc.com/products/ammo-whe...
INTERIOR KIT: ammonyc.com/products/ammo-int...
►PRODUCTS & TOOLS from AMMO
PAINT SOAP: www.ammonyc.com/product/ammo-...
PAINT COATING: www.ammonyc.com/product/ammo-...
CERAMIC TOPPER SPRAY: ammonyc.com/collections/exter...
WHEEL & METAL COATING: www.ammonyc.com/product/gelee...
INTERIOR CLEANER: www.ammonyc.com/product/ammo-...
STEAM CLEANER: ammonyc.com/collections/tools...
STEAM VACUUM: ammonyc.com/collections/tools...
CARPET CLEANER: www.ammonyc.com/product/ammo-...
INTERIOR BRUSH: www.ammonyc.com/product/small...
SCRUB PAD: www.ammonyc.com/product/scrub...
MICROFIBER TOWELS: www.ammonyc.com/product/micro...
WHEEL CLEANER: www.ammonyc.com/product/ammo-...
WHEEL SOAP: www.ammonyc.com/product/ammo-...
PRO FOAMER: ammonyc.com/collections/tools...
AMAZON LINKS
Rupes Polisher: amzn.to/37xPpbS
Rupes Compound: amzn.to/3KtLKus
Rupes Yellow Foam Pad: amzn.to/3DYeKrJ
Rupes Yellow Wool Pad: amzn.to/3LNS93Z
Bissell SpotClean Pro Heat: amzn.to/3v1dq3u
OZONE Machine: amzn.to/3DYgXDM
Carpet Brush for hand drill: amzn.to/31F2PKL
Tornador: amzn.to/3xeTNHV
Rapid Adhesive Remover: amzn.to/2WcuOjN
Headliner Adhesive: amzn.to/33Ts9Ox
Wheel Whoolies: amzn.to/3lYz57I
Grit Guard & Washboard: amzn.to/34d66m4
Stanley FatMax: amzn.to/2Pr0iRM
Rupes Paint Light: amzn.to/2JxzGuD
Clay Bar: amzn.to/2NmWkXP
Foam Applicator Pads: amzn.to/2MVU7U6
Tar Remover: amzn.to/2pYK6ga
As an Amazon Associates, we earn from qualified purchases via paid links above. Thank you for your support.
Disclaimer:
Due to factors beyond the control of AMMO NYC, Larry Kosilla, and Make Rain Productions, we cannot guarantee against improper use or unauthorized modifications of this information. AMMO NYC, Larry Kosilla, and Make Rain Productions assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. AMMO NYC, Larry Kosilla, and Make Rain Productions recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of AMMO NYC, Larry Kosilla, and Make Rain Productions, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not AMMO NYC, Larry Kosilla, nor Make Rain Productions. Video and Content are owned by Make Rain Productions © 2022

Пікірлер: 247

@chrisurquhart3033 Жыл бұрын

Just a safety heads up, be careful anytime you're spinning the prop on a plane! Aircraft ignition systems use magnetos, so depending on the key/switch position, if the prop were spun on the ground the aircraft could temporarily run, turning that prop area into a pretty dangerous place to be. I'm sure the boys were careful enough to turn off the mags, but always better to be safe than sorry.

@oseo943 Жыл бұрын

you are totally right, that was my first thought when he was spinning the prop!

@sardonic_smile_8752 Жыл бұрын

ALWAYS treat a propeller as if it is "live".

@turboproptrash4627 Жыл бұрын

My first aviation job was washing and “detailing” TB-9’s, and I started watching Larry Kosilla’s videos when I started detailing my own car. Neat to see both come together in one video.

@colormesarge Жыл бұрын

Dude those TBM9s are dope

@turboproptrash4627 Жыл бұрын

@@colormesarge TBMs are really cool turboprops. Get up in the flight levels and go. On the opposite end of the Socata spectrum was the TB-9 Tampico. It was the base model of the Caribbean series where the TB-20 Trinidad above was the top-of-the-line model. Same construction though, aluminum monocoque for everything rear of the firewall with only the cowling, wingtips, and tailcone being fiberglass. Pretty thick paint, which makes correction easier.

@petescarport Жыл бұрын

Strangely enough my first job was detailing planes at 14. I got kicked out of school and my dad was an aviation mechanic. I remember finding out about simple green to clean the grease off the belly of the plane because they had to use something non toxic. I learned a lot that year.

@Nnatti_lawn Жыл бұрын

Washed Planes to pay for my private pilots cert when I was in a highschool work program - every 4 planes washed was an hour of flight+training. You don’t realize what 360 degrees of paint is until you’ve washed and waxed a plane!! I enjoyed seeing this planes look come back to life

@jacobabreu9076 29 күн бұрын

Doing the exact same thing right now, what did you use as a “clay bar” or really get grime out of the paint

@Nnatti_lawn 27 күн бұрын

GRANITIZE™ Aviation XE3-G Zero V.O.C. Degreaser Or something like that is what I used for the belly Going to be honest…all the Cessnas I washed - when I dried them there were many that would bleed some of the paint. I only seriously waxed and polished a couple planes, but they were kingairs that had really good paint. My shoulders basically died. Nexgen and 3M had some good products (honesty hour I haven’t clay barred a plane in well over 10 years)

@bhcamaro2002 Жыл бұрын

50k miles on a Ferrari? At least someone drives it!

@bmwf1152 Жыл бұрын

50k miles is not that much for a 360

@RockyRepairs Жыл бұрын

@@bmwf1152 Beat to death apparently for miles

@dylanlawson9097 Жыл бұрын

there was a 458 for sale not too long ago with 90k miles

@0Klugscheisser Жыл бұрын

I mean, there was an Enzo, not to much ago, with 90k + Miles (if i'm not mistaken) and the owner, just pretty much used as a daily driver car.

@joso5554 Жыл бұрын

Nice project. Larry, you might learn that this plane was made in France. It was designed and built by a subsidy of EADS, which now is Airbus Group. The company was named SOCATA and based in Tarbes, in south west France. The same company designed and built the single engine turboprop, pressurized cabin TBM-700. Since then, the company became DAHER and keeps making these great single engine turboprops which have evolved into the TBM 930, 940 etc. These great aircraft are particularly successful with (wealthy) private pilots in the USA and they sell like hotcakes. They are still made in Tarbes, France !

@tristinhonacher1343 Жыл бұрын

I loved the first part of this video! I know that his friend works at Porsche but having that much retention about all the specifications on the cars is super cool. Listening to him talk about all the specs was awesome.

@_Julie_Bee Жыл бұрын

Hey Larry! On historical restoration and preservation I use D2 biological solution, it will not attack the surface, it's been used on the white house, the Alamo etc, so it's safe on any type of masonry, vinyl sidings, wood and many more. It removes everything like lichens, moss,air pollutants, soot. No need to do much, it only need to be applied with water and left to work. Now, I don't know about paint on cars or planes. But I think it would be worth looking into it. If it does the job without stripping any paint away, you would have a real good tool when doing rescue jobs like this!

@AMMO-NYC Жыл бұрын

Very cool!

@_Julie_Bee Жыл бұрын

@@AMMO-NYC 😊

@eckes13 Жыл бұрын

love Ammo and Larry...its awesome that you detail more then just Cars (Boats, Planes, Doodle Bugs, Buses)....i am waiting for Larry to tackle his first 2 wheeler...

@bhumiriady Жыл бұрын

Amazing video as always, Larry! It's definitely nice to see you detailing an aircraft aside from cars. Keep up the awesome work.^^

@onurbespinar Жыл бұрын

Next phase, "today we're gonna polish spaceship" btw Amazing work!

@gunsnsails Жыл бұрын

Not even kidding...I grew up just a few miles from that airport. It used to be well known as G. O. Carlson Airport. I was there weekly for Civil Air Patrol meetings as a teen. I know this hanger! I'm hopefully moving back up that way soon.

@rdrewj83 Жыл бұрын

I just bought a motorhome and every time I see it I think “man larry needs to get ahold of this thing” 😂😂 you’re awesome at what you do!

@dvlop0018 Жыл бұрын

Truly inspiring content. Detailing can go in any direction. I love this content. Awesome work Larry

@SaintsNSinners69 Жыл бұрын

I'm just drooling looking at those beautiful rides. Thank you so much, Larry, for sharing those great shots with us! That's why we love you!

@tomyeplcharger Жыл бұрын

My first aircraft…Now flying the big ones

@IEFlyingRamper Жыл бұрын

Love it with the airplane side! That silver plane btw, that is a North American T-6 Texan. It was a trainer for many years. The Navy vs was an SNJ and Canada built them too, naming their’s the Harvard

@blakslee720 Жыл бұрын

well that's a good way to influence car values. "The dealership owns them, they're not for sale."

@Alex-cv7qj Жыл бұрын

Hey Larry, pretty sure that aluminum plane at the end is a T-6 Texan, a super iconic plane that was used as a fighter trainer during WWII. If you ever get the chance to work on one and maybe go for a ride, I’d highly recommend it. Definitely a once in a lifetime opportunity for many. One question for your plane restoration friends: I wonder what impact, if any, polishing has on the propeller balance. Assuming it would be less than the lichen growing on it, but something to keep in mind as I know prop shops put a decent bit of time into getting those balanced when they go in for refurbishment. Either way great video, love your content!

@mayadenton9329 Жыл бұрын

Absolutely love this video!! I love the transformation!! Always such a joy to watch these videos and puts me in a good mood! Keep up the good work Larry!!!

@oibal60 Жыл бұрын

What a lot of people don't realize is that washing and waxing a typical single engine GA airplane is equivalent to doing 3 saloon cars.

@Jeeeee-in6hi Жыл бұрын

In the USAF on the A-10 not a gloss paint job but we used to clean them with magic erasers. Definitely works the arm out but might be a good intermediate step for that lichen.

@Ikeyy. Жыл бұрын

Absolutely loving the content as of late, Keep it up Larry!! :)

@rebuildrescue Жыл бұрын

Thank you for coming to the rescue once again ! Can’t wait to fly the TB20 up to see you soon 👍🏼

@pilote768 Жыл бұрын

I especially like aviation related episodes 😁 Nice one !

@MrW8411 Жыл бұрын

I did 10 years maintaining a fleet of TB10’s. The paint is shocking on those Tobago’s! This just shows how good Larry is working with such fragile and worn out paint.

@Badenhawk Жыл бұрын

This seemed like a cool opportunity to teach us as well as practice some new techniques for yourself! I really enjoyed your process of figuring out the best way to deal with the lichen.

@ashkirkwood315 Жыл бұрын

Funny I just came in from a long day paint correcting a white Citroen Berlingo which look similar to the plane with lichen and yellow stains which looked like the paint had gone down to the primer but turned out to be pollen! Any way I am shattered and asked myself why am I watching Larry after doing this for 6 hours myself, turns out its because Larry is awesome and we both used almost similar techniques to achieve the same result. Made me feel much better about my work when the customer is holding out on payment.

@MarkMeadows90 Жыл бұрын

That is a lovely plane you guys did! That Porsche dealership had some amazing dealer kept cars in the back. God, I was drooling of what collection that is!

@mike_oe Жыл бұрын

11:22 that black ring / hole is the opening for the static air pressue sensor inlet. Do NOT clot it up. Apart from that, good job - the TB20 is a very capable aircraft worth saving.

@thatpiperguy2387 Жыл бұрын

Hey Larry love to see the aircraft detailing, we tend to restore rather than replace in aviation its great to see and use some of your tips. And have a look at the "Porsche Mooney" there is a way to combine your passion. Keep up the great work....

@samueljones3668 Жыл бұрын

Ha Trinidadian Viewer Here 🇹🇹 That is Porsche Heaven

@mig4068 Жыл бұрын

Awesome job as usual Larry and Kudos to Jake.

@derrickbryant9604 Жыл бұрын

Love the cross between rebuild rescue and ammo nyc! Can’t wait to see if you do the boat project too

@_Julie_Bee Жыл бұрын

I've been waiting for that one forever 😭

@marshprofessionaldetailing9794 Жыл бұрын

This is a really cool video and has tons of useful information in terms of paint correction technique. Thank you Larry!

@zgmurph Жыл бұрын

Looking at Larry’s shirt with all the polish dust on it gave me an interesting thought how it would be cool if that was the shirt had that design on it already!

@madelinegrudens Жыл бұрын

I was thinking the exact same thing!!! Definitely need an airbrushed tee!!

@matthewriley5441 Жыл бұрын

A garage full of Porsches and a Ferrari. But a lovely gem in the corner being the Aston Martin. By far the nicest car in there

@serkanaznevi Жыл бұрын

I relieved, thanks for huge effort :)

@bernandoturner4840 Жыл бұрын

One of the best detail Guys on the Planet….

@Uglier. Жыл бұрын

Work can wait, Larry uploaded

@fyrg1441 Жыл бұрын

It came out really nice, keep it up

@pnoyryder68 Жыл бұрын

Awesome and unique detailing Larry! Question, would putting ceramic coating on it makes sense? I know it works great on cars so I would assume it would in planes as well

@sayyedameerarkhisro1464 Жыл бұрын

It will indeed work on the plane also but for a fairly low time period making it a bit pointless & costly. Maybe that is the reason why ceramic coating was not applied

@pnoyryder68 Жыл бұрын

Actually you can. According to my research, there are companies that specialize in ceramic coating airplanes but it's more costlier than your auto applications of course but the benefits are the same with the added benefit of keeping exhaust stains off much better than untreated surfaces. What I don't know is how long it lasts but the technology is out there and available

@chrisdings8121 Жыл бұрын

These videos are awesome! Would be pretty cool to have my pops 69 Mach 1 detailed. He always wanted to finish the cut and buff stage but his eyesight started going. Keep up the good work!

@ronayotte3571 Жыл бұрын

My inner AvGeek was pleased with this video... and the collection of cars at the dealership was awesome!

@div3gas336 Жыл бұрын

Greeze from Germany 😁 nice video 👌 2 Plane you polish right ? 😁

@maxbrown7407 Жыл бұрын

That dealer tour was insane!!

@bradpiovesan8550 Жыл бұрын

The company I work for did work on the Audi & Porsche of Warrington, it’s cool seeing it all completed. That collection is amazing.

@bradalgra8088 Жыл бұрын

I'm addicted to your videos Larry! I have learned so many things and have spent way too many hours watching them! Buuutt. My cars are looking better than ever! Thank you for all the great vids. I have one quick question maybe you or someone else reading this can answer. Do the polishes you used on the aircraft have to be specialized in that they are anti-static? If static attracts dust, wouldn't that cause drag? Thanks

@just_some_internet_guy Жыл бұрын

Thank you Larry, for the look into that Porsche dealership's, 'Secret Room'!,

@joe.olivet Жыл бұрын

Truly amazing work. 😎👊🏻🔨

@julianrequenez2704 Жыл бұрын

I love watching the aircrafts detailing. Would love to see a helicopter

@nightrunner1456 Жыл бұрын

Great to see the new Challen.

@andrewb325 Жыл бұрын

That RS6 looks amazing and those Porsches are beautiful. I love this channel.

@blakslee720 Жыл бұрын

I wonder what's out there for plane coatings and UV blockers. Larry of course has Reflex Pro for cars, is there a plane equivalent out there

@williamcampbell9451 Жыл бұрын

You truly are the best! Keep up the great work Larry!

@trescodm6867 Жыл бұрын

Wow these vids are cool and impresive keep up the goodwork larry!

@garfylunds7301 Жыл бұрын

Boy...his detail job really took off! Nice work again.

@Materialpepper Жыл бұрын

These videos are the best Keep up the good work

@garysmith5434 Жыл бұрын

Awesome video

@richardtaylor4126 Жыл бұрын

Love the plane detailing videos!!

@OMrkithO Жыл бұрын

Larry in the Porsche showroom was funny to me Idk why

@corrtechit2901 Жыл бұрын

Great Job, the plane looks so good now!

@archanorius Жыл бұрын

welcome to this episode of Fly and Protect

@luisaraujo8317 Жыл бұрын

Please do an old RV next.

@KURUZU43 Жыл бұрын

I always love the plane videos that you do just because you get to see sort of a different technique that you use to get leverage when polishing I noticed that you used that technique again while doing the fuselage it's where you're holding the rotor tool at such a specific angle to get the best result it seems like you're right up on the plane so that you can hold it at a specific angle I always find this fascinating well done again Larry.

@castcatch Жыл бұрын

Bucks County born and raised! Live to see you our area. Great car culture in that area. You just missed Hatboro's Cruise Night

@timbrown9731 Жыл бұрын

Larry after correcting paint like that on an airplane is it worth using some sort of sealant on it? And I wonder if the added sealant would cut through the air a little bit better as well? Used to use a product called finish first, this was back in the late 90s early 2000 and the developer claimed that would be beneficial on aircraft.

@acts2211 Жыл бұрын

Great job Larry

@peterjurenovskis5933 Жыл бұрын

What a super video! I wonder, however, you are always extolling the virtue of doing the least aggressive method of correction first, then stepping it up. From a paint thickness in the mid 3’s to your final product at mid 1’s, that’s quite a drop (using a wool pad and an aggressive compound). I’m sure you considered something less aggressive first, but it didn’t come out in the video. Just an observation. Great job on the plane…it looks sooooo much better!

@birdssurfshed Жыл бұрын

Your posts are awesome!!!

@wollver2072 Жыл бұрын

Amazing detail man.have a danm good day man.

@coxadoido389 Жыл бұрын

Wow this video is awesome, airplay detail.

@Datsem Жыл бұрын

"Sounds horrible, I'm not available" Lol

@lynnew5619 Жыл бұрын

Never a dull video. Loved this one. 👏👏

@micahellsworth Жыл бұрын

I wanna see you work on an old beetle...

@tucksmith8300 Жыл бұрын

That airplane looks good

@mrawesome2524 Жыл бұрын

Larry Kosilla … Unofficial PORSCHE Ambassador :^D. LOVE these other than car videos keep up the great content!

@gurkpojken Жыл бұрын

I dont know if you mention it in a earlier ep. But i want to know what happen to the gigantic job with all the cars you started with ,you did the car inside the garage with no electricity and no water. That was soo dope.

@dandezz Жыл бұрын

Awesome vid lar.. Do you think the mike phillips approach of washing the plane with comet first would've been safer for the paint before polishing. ? It did come out beautifully despite what you had to work with. 👍🏻💎👀

@TheJustinSloan Жыл бұрын

After watching this I realized that I literally drove by Larry when he was at the Porsche dealership. It's crazy because I should have recognized him, but I didn't even think about it until now.

@natalijaparadiso7566 Жыл бұрын

Hey ammo nyc I am a big fan of your channel videos keep it going well done 👏😎😎👍✌

@grand04gt Жыл бұрын

I wonder what a non abbrasive polish (like Carpro Essence Plus) would do if it would make it a bit more gloss without affecting the thickness too much

@oibal60 Жыл бұрын

When I'm polishing my friend's Piper Comanche I use my trusty random-orbital Cyclo.

@NewEnglandPatriotsfan Жыл бұрын

So happy that airplane has returned to the skies lol

@domcardona3623 Жыл бұрын

I’ve repaired t6 Texan ii’s for the navy and they have the same props (which are painted black). I hope those weren’t black and the paint was removed.

@jamesvillarini3470 Жыл бұрын

Love seing that your right in my backyard!

@kendavis1198 Жыл бұрын

Planes?????? I thought my TRUCK WAS HUGE??? 😂. Daaannnggggg.

@Archangel_158 Жыл бұрын

16:16 That's a North American T-6 Texan, a radial-engined trainer for the US Air Force that dates back to WWII. It was one of the most popular (advanced) trainers for fighter pilots during the war, as it prepped them to fly something like the P-51 Mustang. It's not unusual to find them in the bare-metal finish or in very bright colors.

@silaselias9236 Жыл бұрын

Larry missed an opportunity to say “that and a whole lot more on this episode of fly and protect” lol

@codysteel3678 Жыл бұрын

I love your videos and I love your restorations and the cars that you restore. Keep up the great work and keep making amazing videos

@codysteel3678 Жыл бұрын

Thank you AMMO NYC this really means a lot to me

@no_lft_shft Жыл бұрын

One day I will own a Porsche. Did you see the new gt3RS???? That thing is NUTS!!

@naomarius3348 Жыл бұрын

Crazy to see how far around the world the Manthey Grello design seen on the car cover at 1:20 has made it.

@Archeagle Жыл бұрын

Nice job. Adding a ceramic coating could potentially help for the gloss maybe?

@blackwater485 Жыл бұрын

Is there anything that Larry can't save? Amazing video as always. See you again next week, Larry!

@Love4Z Жыл бұрын

Larry helped me clean up my marriage.

@MyGuyKirby Жыл бұрын

Larry, I have zero experience with aviation paint. I guess you used a Rupes yellow and blue wool pad some of the time. For a light polish is the UNO PROTECT safe on aviation surfaces?

@vashti1616 Жыл бұрын

Porsche makes an electric car?!?!I never knew. Learn something new everyday.

@alanbower9296 Жыл бұрын

ALWAYS LOOK FORWARD TO YOUR VIDEOS VERY INTERESTING ❤👍

@strat0871 Жыл бұрын

Very nice ! Socata Trinidad is a very good french aircraft.

@coolie53 Жыл бұрын

Very cool, I watch all your content and was intrigued to see the name of the plane (Trinidad) , because I am from the twin island republic of Trinidad and Tobago 🇹🇹, so i had to do some research and after reading it was great to see that the manufacturer of these planes actually had a caribbean line named after the islands.

@jspencer89yt Жыл бұрын

Hope they keep the name Trinidad

@AL_SD Жыл бұрын

What great customer service at that Porsche dealership. I’ll be lucky for my local Porsche dealer to let me look around their lot without getting kicked out.