CHECK OUT THE WEBSITE\/\/\/\/\/\/ VBELTANDSON.COM EMAIL VBELTANDSON@GMAIL.COM
Пікірлер: 296
@douglasmorton61212 жыл бұрын
I think everyone loves a restoration/rebuild video series, but you know how much it would cost. Parts are needed, so it makes sense to part it out too. But the idea of seeing that truck remaining functional for years to come is something we all appreciate. Save it!!!
@jerkyturkey0072 жыл бұрын
Look into its history, it may be from somewhere in the rust belt. If it were my decision, I'd fix her up and put her to work. You know better than I do the harder you work those old Cummins the better they run. Like you said the combination of 12 valve and manual transmission is becoming super rare and go up in value and there's good reason for that... pre def and single wire, need I say more?
@davidsnow14812 жыл бұрын
Man grandma’s truck sounds badass. It would be very cool to save what you could on it then salvage the rest or do a 12 valve swap on the yellow truck. Keep up the good work and stay safe out there.
@jonathansantos95932 жыл бұрын
I agree with ya right there.
@jonathansantos95932 жыл бұрын
@@laisuresboringadventures7052 true. I'd like to get another 12v as well.
@lilredcummins2 жыл бұрын
I was screaming at the video to check the shutoff solenoid! You got it eventually. Also, I would have removed the air filter cover and checked to make sure there were no nests or dead animals in there. Glad you rescued the old beast. It's hard to kill a Cummins.
@LaneSchlabach5 ай бұрын
Let alone a 12v
@mikeparker28652 жыл бұрын
This right here is exactly why I love 12 valves.... Spent all that time sitting there and as soon as you realized it was the shutoff solenoid it fired right up.. It was a little rough and stalled a few times but listen to how smooth it's running now...
@alexgibbs18862 жыл бұрын
I love seeing old dodges getting put back together I’m all for it brother
@operatorbenji97352 жыл бұрын
I love seeing any old brand even if it’s a Chevy being put back together and restored
@jerrybradshaw98792 жыл бұрын
I’m impressed with the jump pack,did quite a bit of cranking.
@TheMoparGarage2 жыл бұрын
I wouldn’t restore it to the level of grandmas truck but a fender, some suspension parts, and a little electrical work and you’d have yourself a nice flip
@isaacfink70012 жыл бұрын
‘I am not about to pull a vice grip garage and lick that’ 😂😂 love it! What an awesome find!
@SuperCrackSack2 жыл бұрын
Last year California emissions compliant, first year hydro boost brakes
@jordanbusone56812 жыл бұрын
You should make videos on doing all the maintenance on it and all the little odds and ends to get it roadworthy
@sblsbl76002 жыл бұрын
That was cool Sam. I laughed at the vice grip garage reference. Fixing it would provide good content for the channel. I subscribed for the truck content. I have learned a lot about my own truck from this channel.
@diamond_industries2 жыл бұрын
I enjoy all the restorations. If all the parts are there and it needs some TLC it could be another flip.
@rockingkvideos31602 жыл бұрын
On the way to 100K🙏. Another 12valve project💪🏻thanks for sharing Sam👍🏻👍🏻👍🏻🇺🇸
@lyndonhamby74322 жыл бұрын
Old 12 smoothed right up. Sounds good 👍
@chadgchaney2 жыл бұрын
Looks like the start of a good project. Glad to see you got this truck. We saw you at tractor supply yesterday afternoon .
@VBELTandSON2 жыл бұрын
Should say hi next time🤟🏻
@chadgchaney2 жыл бұрын
@@VBELTandSON Will do . I did not know how you would feel about that . Tell Tom Chad from Butler st said hi. He is a good kid. I guess not a kid anymore .
@bradcarroll52652 жыл бұрын
I’d enjoy another restoration series. That’s a really cool truck with the factory leather and standard transmission. I’d assume that wasn’t a very common combination.
@michael217martin2 жыл бұрын
I would love to see you build it like your grandma truck. You have a good eyes when you find 12v so I have to say build it
@drewhause21052 жыл бұрын
Love to see that thing fixed up and back on the road!
@germanjesus2 жыл бұрын
That is a sweet rig Don’t give it up Get it rolling
@DIRTYDIESEL982 жыл бұрын
Those rims look like the ones that came on my 24v when I bought it but I love the new truck cant wait to se what happens
@f5tornadeau2 жыл бұрын
Dude rockin out all the cool Rams. Me: “oh, a truck with low miles! Sweet! 3.42 gears in a dually!?! The GCVW isn’t even high enough to tow a gooseneck with a CTL with a mulcher. Is a used Ram with a G56 and 4.10 too much to ask? FML!”
@BombsAwayMineCraft2 жыл бұрын
Right. My 2001 ram 1500 even has 410 gears
@003fulle2 жыл бұрын
I’d love to see a restoration.
@randyvanetta51972 жыл бұрын
I freakin love that are saving these trucks. 🇺🇸🇺🇸🇺🇸
@livewithnick2 жыл бұрын
Personally I’d fix it up enough to make it safe for the road,do a little engine work,new tires and put winches front and rear and make an off road recovery truck out of it. Then make videos doing off-road recovery.
@donovanmclaughlin47092 жыл бұрын
I just bought a triple axle diamond C38 ft gooseneck and man you weren't lying those trailers are amazing one of the best pulling trailers I've ever had I have a 44 ft PJ gooseneck as well doesn't even compare and it's a very nice trailer love the videos man keep up the great work
@BattleBornCowboy2 жыл бұрын
I would kill to have a cool project truck like that. Lots to invest into it but saving them from being smashed.
@delprice30072 жыл бұрын
I've got a '95 SLT 3500 flatbed automatic with a triple disc torque converter that would be great to have you get in shape...for farm work.
@markrabbia82812 жыл бұрын
That bumper was made for that jump pack too sit there! Looks like a decent truck
@warrior0115032 жыл бұрын
Another adventure I love this videos so fun and clean air always
@phillipnunnink13072 жыл бұрын
If my memory is correct, JM bought that truck from a private party in Salt Lake City many years ago. Might explain the cab rust.
@VBELTandSON2 жыл бұрын
That would make sense
@trav395hus82 жыл бұрын
New to your channel and love it! Merry Christmas to you and your family
@likwitsnake22 жыл бұрын
Hey! Long time subscriber. I love the videos. There are 5 or 6 channels I actually seek out when they post new things, and you always get a click. Anyways - have you considered filming in 4k?
@VBELTandSON2 жыл бұрын
Thank you I appreciate that. And I need to step up my tech game and possibly go 4k
@Josh-tx3yi2 жыл бұрын
@@VBELTandSON Hey man do you know what a biller gagues you have on the 12 valve because I cant find anything for my truck, Thanks
@shawnmcdonald00282 жыл бұрын
Hi i laugh when you pointed out those little specks of rust its soft lol . Within 4 years they start to look like that around hear in north central PA.
@VBELTandSON2 жыл бұрын
Glad I don’t live there lol
@lyndonhamby74322 жыл бұрын
Sup Sam. I liked your an Tabotts towing video. Y’all two crack me up 😂😂😂👍👍
@ronaldheit1962 жыл бұрын
Definitely restore it. New tig welded in metal where needed. All new anti-corrosion brake and gas lines.
@robertmatthews27762 жыл бұрын
Great job, GOD BLESS YOU...
@kennygroomes80812 жыл бұрын
I like your videos and how you restores trucks
@normanbanks89022 жыл бұрын
Restore it. Love seeing them on the road!!
@cumminschevy52752 жыл бұрын
Grandmas truck sounds badass flatbed was a good choice looks amazing
@nailhead732 жыл бұрын
Digging the content. Beautiful landscape in the background looks familiar. I will put a wave out the window if I see you.
@Godslaws84632 жыл бұрын
Advanced flow engineering, you know that Means power. Classic.
@BattleBornCowboy2 жыл бұрын
My 66 ford f100 had a lamp wire used to connect the battery. My wife’s uncle was very creative.
@chadholmes58767 ай бұрын
Nothin sounds as good as a 12v especially with the stock hx35 that slight sing at idle with a full straight pipe pure music. I sold my wonderful 97 12v after 14 years (always garaged and no winters) with over 500,000 miles only because I was embarrassed at the boat ramp after having to be pulled out a few to many times. I needed a 4x4 for i been through several different trucks since I sold it, the 12v still calls to me. Here in Michigan they are ALL rotted out now. I need another with 4x4
@danielcarney61932 жыл бұрын
My suggestion is to find a gen-1 crew cab and body swap it and make it a crew cab shortbed dually.. At least that is what I would do if I had the time and less projects of my own.
@georgeenriquez6122 жыл бұрын
I wouldn’t mind seeing it get fixed up for the content. I like the project videos
@knightofelemia15672 жыл бұрын
I'm not a Dodge guy but if it runs I would say restore the truck it would make good content I like watching restoration vids.
@mikestrucks2 жыл бұрын
Nice buy buddy ! I would probably fix her up again....
@thomasyerbey3372 жыл бұрын
Great truck Sam love them Cummins 🇺🇲
@Thejohnmullen2 жыл бұрын
Man hearing your trucks make me miss my old trucks. The 2021 is a Badass rig but it sounds like a 1 ton Prius
@peerless89675 ай бұрын
love how it blows spoke o rings so beautiful
@abishaicaldera29782 жыл бұрын
It’s a 12 valve Cummins of course it will start doesn’t take genius either to get her runnning
@VBELTandSON2 жыл бұрын
Go have some fun eh?
@grady_buckendorf38642 жыл бұрын
I would love something like this for my first truck especially a 12V
@derajyellat1022 жыл бұрын
Highly recommend
@vapeking88822 жыл бұрын
sorry rant alert!!!! god I wish I could say that here in pa that I never see rusted out rocker panels here in a few yrs your new truck is a rust bucket then they change the laws that ya cant have rust hole anywhere or it fails state inspection but they keep tossing salt on the roads and the dam calcium salt brine pre treat 90% of the time they put it down we don't even see any weather its ridiculous. anyway nice find on the 12v. stay healthy and thanks for sharing
@reaganyoder22792 жыл бұрын
We had an obs 7.3 liter that had been sitting outside for 18 years. Finally, we pulled it inside and after about 30 seconds of cranking she fired right up!
@jaredwutz24542 жыл бұрын
Me personally, I love the restore content, but you spent alot of time on grandma's truck. You and 12 valves just seem to work yourselves out to the correct path.
@douglasdoggett78932 жыл бұрын
Fix it up buddy and keep it
@anthonycash46092 жыл бұрын
I seen your video on your 550 registration for next year and that sucks. And I saw on Google that generators , 2 stroke small engines , and gas powered lawn mowers were also going to be outlawed in California as well. Is there any truth to that. Man I sure hope it's not so for every working man's sake .
@phillipporco34562 жыл бұрын
All SORE (small off road engines ) illegal for sale in California as of January 2024 . Thanks California ! We will just use battery powered stuff that slave labor is used to pull minerals out of the earth like lithium and cobalt used to make batteries . Look up the cost of green energy it’s a hoax.
@markbremmer86422 жыл бұрын
The government doesn't realize, that you still need Diesel powered equipment to mine the ingredients for electric powered equipment.
@turbodiesel47092 жыл бұрын
@@markbremmer8642 : They realize just fine. They simply don't care. California has been a cesspool of air quality problems for a long, long time. California's underlying problems run much deeper than simple motor vehicle pollution. They have far too many people crammed into a small space with inadequate ventilation. Plain & simple. Beyond all that, follow the money. There's big money to be made in following the trend of "going green" these days. If there weren't, it wouldn't be happening. Humanity seems to thrive on self-inflicted (created) chaos.
@johnjesus9712 жыл бұрын
Just found your channel. That LGB hat earned a subscription.
@408224992 жыл бұрын
Fix it!!! Priceless
@jeffreypinder93982 жыл бұрын
Use it for parts. That truck wasn't only in CA...the salvage title alone is a red flag. I have enjoyed your videos for a while, just got linked through a computer recognition of company Gmail address and KZfaq came alive. Love Grandma's truck and what you did with her.
@Asphaltaperider2 жыл бұрын
"It's a 12v, that thing will run on used motor oil.". 😂😂. FIX IT!!!!!
@ryankeil91362 жыл бұрын
advanced flow engineering = afe same company. had one of their turbos before not much different than stock. makes it a little more fun
@operatorbenji97352 жыл бұрын
Even before truck prices got way out of hand here a beat up high mileage 2nd gen would be 10k if you could find one for sale in the first place
@Pan_Gotti2 жыл бұрын
Use the 5 speed and go fast parts for the d200 build. We seen ya working on second gens Mang get up in that 60s action.
@VBELTandSON2 жыл бұрын
Read my mind
@Pan_Gotti2 жыл бұрын
@@VBELTandSON it's what I would do 🍻 I'm coming back through your neck of the woods around new years I still got that damn center console if you want it.
@VBELTandSON2 жыл бұрын
Send me an email. Let’s meet up Vbeltandson@gmail.com
@ryanhappygilmore24262 жыл бұрын
It's already doing better it's running, it may need alot of work, if it's not restored and gives it's parts to a couple trucks then it's still useful
@markarnold48682 жыл бұрын
Nice parts truck you got there bud!
@BrianGib852 жыл бұрын
Sure would like that Lucas Mill back there!!!
@jamesgunnyreed2 жыл бұрын
Like the Vice grip Garage plug..... "A guy has too many 12 valves"! Unless you have a plan for the engine and trans Id clean her up, give it a full service, make it roadworthy/legal, and flip it.
@VBELTandSON2 жыл бұрын
It has plans in store for it. Wildest build yet
@treystewart544 Жыл бұрын
The starter of the Dodge Ram 12 valve Cummins sounds like it’s laughing sounds awesome 😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎
@LoneWolf-cf5tp2 жыл бұрын
Fix it. They’re to hard to find.
@danielseipert94262 жыл бұрын
Looks like Drummond’s old bumper too.
@charlesouimet9183 Жыл бұрын
How do I make my 01 Cummins 24 valve to sound like that between gears
@ivanpaniaguaheredia67222 жыл бұрын
What are those chrome tie down things on the bed i like them they look cool
@sprucegoose10162 жыл бұрын
Now that's a cool truck. These trucks just seem to fall into your lap lol.
@williamcunningham98192 жыл бұрын
How much to buy in current condition (to include shipping to Scotland🤣☹️🤣👍🏻). Great channel, particularly liked this video, best wishes.
@EFFEZE2 жыл бұрын
I could not be arsed trying drive that over here. Left hand drive as well. That makes my old Range rover look small.
@jonallen19852 жыл бұрын
Flatbed dually swap? Maybe smokestacks?
@borndifferentnf12 жыл бұрын
Then thing tapped in the coolant hose is for one of the gauges tells the coolant temperature
@yungBitta2912 жыл бұрын
Idk how people are so lucky to find abandoned Cummins I really want a Cummins sense I was a kid still can’t find one worth buying for the asking price
@jimt1252 жыл бұрын
Did it have grid heat deleated, good work truck
@harlandixon34532 жыл бұрын
Matt, I would hate to see it parted out and off the road, but with a branded title it would not be worth the cost of parts. That being said, if you decide to part it out I see quire a few parts I could use for my 97. I would be willing to make a deal with you on them. Harlan
@VBELTandSON2 жыл бұрын
Who is Matt? Lol
@harlandixon34532 жыл бұрын
@@VBELTandSON Sorry Sam, I was thinking one thing and my fingers were doing there own thing. My son went into the hospital with a collapsed lung tonight…I was distracted.
@shanebalthazor37892 жыл бұрын
Be nice to see it road worthy again
@darrellgarlough71402 жыл бұрын
Heck, that's what we call a solid truck here. That body is good for at least another 10 years and that would be in Iowa
@michigandogman30602 жыл бұрын
Careful on that starter, they aren’t that great to change 😂. I drove a freightliner cab over that had a Cummins 350 that had a fueling issue, the white smoke would make you sick.
@VBELTandSON2 жыл бұрын
Ol starter swap on a 12 valve is a 5 minute job. Or a smack of the hammer lol
@alexgeorge60912 жыл бұрын
Fix it! Give it life again and put it back on the road! That truck is a gem
@craigschnake55362 жыл бұрын
I’d say restore it and put a skirted flat bed in it!!!! Okay so I won’t your opinion on my truck I am restoring.(im 15 btw) so I have a 1974 international harvester 200 4x4 that I am putting a 12v Cummins in w a 5 speed manual what would u think about it when I get it finished would it be cool?
@VBELTandSON2 жыл бұрын
Yeah that would be an awesome truck! Definitely do that swap!
@mikeske97772 жыл бұрын
Savage title more work then grandma's truck. I see a donor truck even with all the options already on it.
@riggsandmurtaugh79382 жыл бұрын
First will it run I've seen on a dodge Cummins
@domrat72572 жыл бұрын
restore it
@gtr19522 жыл бұрын
That is how they start to rot in NY. Then they get so bad the cab falls off the frame. 8( There is a guy midstate here that is restoring them, from southern trucks. He wants/gets $30k with a rebuilt engine. Almost makes sense now days. 8) --gary
@prestonslack73212 жыл бұрын
I need 12 valve Cummins for my 1995 Chevrolet dually
@korn1116852 жыл бұрын
No idea what you should do with it. I like the short bed Cummins myself. I like to cruise around now, I wouldn’t work mine hard since they’re getting older. Make a short bed cruiser out of it? 🤷♂️
@TylerJordan942 жыл бұрын
That truck is fuckin mint compared to my 12 valve here in NE Indiana
@tammylott9212 жыл бұрын
PLEASE FIX / RESTORE / RECYCLE THE RAM ....
@jeffjacobs14202 жыл бұрын
I’m really hoping you save this truck
@jjremovalservices74182 жыл бұрын
It doesn't look to terrible from what you've showed us, we say fix er up. That's a working machine
@jackiejoe89302 жыл бұрын
I vote put the drive train in the blazer.
@stanleybroadhead76412 жыл бұрын
Is that a 2 speed rear end switch on the gear shifter?
@VBELTandSON2 жыл бұрын
Exhaust brake.
@stanleybroadhead76412 жыл бұрын
@@VBELTandSON Thanks
@zacharywatters18432 жыл бұрын
You should build it, ain’t making any more of em that’s for sure. You’d get a lot of views and it’ll be worth building it in the long run