If I had the money I’d jump on this in a heartbeat. Glad to see it saved and ready to roll, it’s a beauty.

I’ve never seen someone do so much work to sell a truck. You’re a good man. If I had the money I would snag this truck. Good luck with the sale.

I wish the guy I bought my last truck off did a once over as good as you've done here before I bought it. But if it's leaving your shop, it has your name on it, well worth the extra work. Lot of respect for you Sam and you family. Keep on Keeping on. Hell Yah Brotha.

I new a man in Canada , back in the 1950s who put his car on a hoist every yr & spayed the total under side with his used oil , couple times before the winter road salt . He drove a late 40s Ford NO RUST

us norther/rust belt area love our oil leaks that actively under coats our trucks

Have 97 12valve with 97,000 original miles and I'm the original owner tried to sell it for 16,000k and got low balled here in Washington St. Your price is fair and I've watched you put everything into that truck hope you get your price.

That’s going to make someone a fine truck!! Good Luck with the sale!!!

I enjoy watching your videos of the Cummins.

Same thing happened to the window in my Dakota with a very similar track. The parts store didn’t sell bushings for it and said I needed an entire new assembly. I took a look in the “help” section and grabbed a pack of pedal & shift linkage bushings and wouldn’t ya know with a little grease one of the buggers popped right in and worked great for 100s of window cycles and as far as I know still works to this day.

Good luck on the sell Sam. Can’t wait to see that new Mopar!

Thats wright Sam . plenty people will want ur trucks. Ur a good ole boy. Watch all videos u put out. Grandms is my favorite.

Price is spot on even for here in Florida

11,500 super fair price in today's crazy market!

Shop vac and a funnel. Genius

At least everything is fixed on it. Good price 👍, paint on truck is just fine.

Good luck with the sale, if I had that much spare cash laying around I’d make the trip all the way from Illinois I really miss my old 2nd gen

Nice work Sam, that is a nice Second Gen for 15K. Thanks for sharing💪🏻💪🏻💪🏻🇺🇸

I have one of those Mag-Hytec rear diff covers and there is a dipstick you unscrew from the top to check the fluid level.

Bad time of the year for me or I would have loved to grab that truck. Nice job. Nothing worse than buying some “I know what I have” junk and finding things when you get home. Or getting there and purposely over looking those little things that you think you can deal with later. When I’m ready I’m going to start looking in that part of the state for my next 12 valve.

Hell yeah brother! Dang nice truck & dang good price! I sure wouldn’t sell my 99’ that low...

If I lived closer I'd buy the truck. Ga. just a little far from Calf. Great job on truck.

Love tractor supply 👍

Excellent work and thanks for the awesome content stay safe and take care

That oil coating is great here in NY. It keeps the truck from rusting

Nice job Sam! It came out really nice and the price is great! I still want to buy your green truck.

LMC Truck has thoes upper front bumper caps for $40, you should replace that to because that one is soooo faded. I'm happy your putting thoes old 2nd gens back on the road :)

Glad to see you getting those Milwaukee tools. Don’t get me wrong makita is a great brand but once you bleed red you’ll never bleed green or yellow again

Thats a pretty good price. Good luck with the sale.

The new Banks Diff cover are really nice

Burns up the Brakes Quickly

That’s a pretty good price in California with covid, wish I hadn’t just bought mine, this would’ve been a much better buy!

That's a great price I just bought a 98 short bed and paid 9 grand then put 1500 into it and still got probably another 2000 just to make it good and sound.

That mag-hytec diff cover has a built in dipstick on top dude!

Just sold my my 97 12 valve truck for 12k in placerville CA. was a longbed 4x4 extended cab as well but had a built 47re and was pre smog. Miss that truck but just picked up a 2011 crew cab longbed 3500 4x4 g56 cummins for 25k :)

The no rust is a big deal! We NEVER see that here in NY!! Should sell fast.. JMHO.. --gary

Hell yeah brother!

I am not a dodge man i am a gm fan I have had three diesels trucks all gm but i have friends who have fords and dodges and they all are pretty much equal, i think the price is perfect diesels hold there value it doesn't matter what brand they are and that one has pretty low miles for a 23 year old truck and you just went all over the truck and fix it all and it tows and runs excellent good luck I personally think you will get your asking price you should ask more

Nice truck.

Thats a very nice price. I thought you'd be asking more myself. Wished I had the money.

Nice truck 👍👍

Will it make it to Wisconsin!? Ha. Hope I can find something this nice when I get back to the states... really want a 4 door 12v though.. so here’s to hoping. Wish there were more deals like this out there!

I think the price is fair, especially since you put some time in to it. I would buy it if I wasn't in PA. Shipping would kill me lol

Hell ya brother 👍... Dang that was a long video but I watched it all.

Boon just says, leave me alone and I will just lay here and watch you do what you do.

The famous words of every man who is selling a Cummins “price is this because they don’t make them any more” 😂😂 followed immediately by “the only thing it needs is this....” 😂

Hot damn that’s a good deal!!

Your asking too little but your being super fair good job 👍

I have a mat on the dash of my second gen as well

cute pup

16:44 those covers have a dipstick to the right. FYI

If they made a crew cab 2nd gen I'd have one or people didn't think their first gens were worth gold I'd have one, but since they are so expensive I own nothing but old chevys. 😂 😂

In Michigan we call that Rust prevention

If you don’t keep your screwdriver bit square (plumb)with the screw you will break it every time

Not VBelt and Son Nor is it going to be Samson and Son. It is Sanford and Son. I got a prepainted skin for my 2007 tailgate. About an hour and it was good as new.

Nothing Beats a Dodge,,,,,🤘🤘🤘🇨🇦🇨🇦

Nice.

like your dodge

That truck would look good in Ga. 🤔

Great price, wish I had 11,500

Spray the white tailgate the same black as the hood, it would look a bit "Mad Max" but still good.

Love it but where I live in Arkansas that price is off the charts lol the money is just not like that here but she is perty

I just bought a factory 5 speed 98 12valve

Sam, love your channel. I just figured out how to change my name on here, I was inquiring about Gma tractor on a recent video, also now inquiring about a gooseneck hitch for a 99’ Cummins...got an extra laying around? I’ve also got a nice set of heated electric regular mirrors, barter maybe? I’ve got a set of tow mirrors now...

31:40 free undercoating. You don’t live in the rust belt so you wouldn’t know.

Good luck selling, hope you get your asking price

Cool truck. My 98 24v has a nv4500 but I want to put in a nv5600 is it possible to use my existing clutch and flywheel since they are new . It looks like they have the same input shaft sizes.

That is cheap around Pennsylvania that truck would go around 20k. People are CRAZY Your price is what they should sell for!!!!!

Wow I'm talking to my bank

I think it's definitely a fair price

Thoughts on john the diesel man's 2nd gen dodge trucks?

Shit that is cheap for that truck. Especially since you fixed it up nice.

Id really like to have it

made it to the 47 min mark

I wanna know how much one of these 2 gens clean as that is in ca... Bc here in Mo rusted out truck still $4500 non running or bad transmission!

12valve isn't that rare as people make them to be. Get a pre 98 v10 2500 or 3500 and swap the v10 and pcm with the 12 valve and pre 98 pcm. Should cost you around 5 grand. No modification needed and should be over the weekend job with couple of your buds

Am I the only that caught the Andrew fix quote

Hey man where do you get your music from for the videos?? Thanks!

U should get U A Pressure Washer.

I’ll trade you a twin to that first gen but 175k and 5 speed🤣🤣🤣

Isn't this the one you weren't gonna sell? Don't get me wrong, I thing your getting wiser getting rid of all these!

Buy a Duramax! Truckmaster# gonna restore the cummins 1999 hope you are watch it then you will be jealous

You can keep the box of 45 lead but swap it for one of 9mm . If it was 10mm l would need my daughter in-law to sell me our deceased son’s , the one you see in the picture

Make sure your straps are locked in man

I'm still trying to figure out why you call it purple truck. You might of said it in another video. But I have been scratching my head on why?

Did anyone see his dog ?

Has the truck sold??

Please add your content to Rumble. You know why!!!!

What color did you say? One of us is color challenged . Looks red to me

Diff cover is junk...find a stock one

So Nice 💘💘💘💘💘💘

Trade for a ford ranger ? Thats beat to shit😂😂😂

Really nice 👌 😍💋 💝💖❤️

1st 😎👍

i dont think that valvoline gear oil is the right oil for an NV4500. i run Amsoil MTF. www.amsoil.com/p/manual-transmission-transaxle-gear-lube-75w-90-mtg/

1st