Abandoned Yanmar Tractor WILL IT START? Part 1?
Рет қаралды 112,133
4 жыл бұрынI found an old abandoned tractor in a field. WILL IT RUN? I'm pretty sure the engine is completely blown. We need to haul it back to the shop and check the fuel filter, compression, and injectors to diagnose whether the engine is blown. Is it a simple fix or a full engine rebuild? TOOLS USED ↓↓↓↓
➤ Next Part: Tractor Vinegar Radiator Flush: Part 2 WILL IT WORK? LET'S FIND OUT!: • Tractor Vinegar Radiat...
✱✱✱Tools Going To Be Used In This Build:✱✱✱
● Diesel Engine Compression Tester: amzn.to/2TD2dEl (Nearly Identical Kit)
● Diesel Engine Compression Tester Kit 2: amzn.to/3e7NZTI (Different Style)
● Radiator Pressure Test Kit: amzn.to/2VQuvLK
Ingersoll Rand Air Tools:
● Impact Wrench: amzn.to/38n6Qao (One I Own)
● Air Ratchet: amzn.to/3awlo9t
● Air Hammer: amzn.to/38I6sne
● Die Grinder 90°: amzn.to/2NJrb1O (BEST one made)
● Die Grinder 90°: amzn.to/2NMcniV (One I own)
Air Fittings:
● Milton V High-Flow Air Fittings: amzn.to/2J0PofR (BEST air fittings made!)
● 3/8" Air Hose Reel: amzn.to/3av4jg8
● Air Regulator/Filter: amzn.to/36mNpgA
Hand Tools:
● Long Wobble Impact Extension Set 3/8": amzn.to/331jHxG
● Metric and Standard Socket Set 3/8": amzn.to/2WQ0s7F
● Metric Impact Socket Set 1/2": amzn.to/2Ra5HgK
● Standard Socket Set 1/2": amzn.to/2G51Jzw
● Gearwrench Ratcheting Wrenches: amzn.to/2tBdnj4
This is a late 1970's Yanmar YM2000B 2WD diesel tractor.
These old diesel tractors are built simple and built to last.
@deblovesthis 3 күн бұрын
We just bought a YM 1600 that doesn't run. We'll be watching your videos. Thank you.
@MattsShop 3 күн бұрын
Nice!! The 1600, 1700, and 2000 are pretty similar. The 1700 and the 2000 are almost identical.
@natevanlandingham1945 3 жыл бұрын
I also know this is done, but those tractors have depression valves. Open them to crank over for easier starting and to clear the cylinders. Also for those watching you usually never have to bleed injectors on those yanmars. Start at filter and work to pump. Sounds like decompression valves are open to me as well. No compression sound and spinning fast First thing I would of done would be check the decompression valves, pull cover and check linkage!! I think there held open. Those watching this those are british pipe threads, close to american but slightly different. Don't mess your threads up. Word of caution.
@MattsShop 3 жыл бұрын
Are these really British pipe threads? I had no clue. Thanks for the tip!
@dwightdyess455 4 жыл бұрын
As soon as you hit the starter you could tell there was no compression
@MattsShop 3 жыл бұрын
It's got that decompression lever too. I like to be thorough. No need to throw parts at something. You know what I mean?
@MattsShop 4 жыл бұрын
What Up Y'all! Hit the sub button and the bell. Don't miss out on the Yanmar tractor rebuild! Links to all the tools used in the description PEACEEEEEE. Abandoned Yanmar Tractor Part 2: kzfaq.info/get/bejne/jLWGgsl22tSuh4E.html As an Amazon Associate I earn from qualifying purchases.
@beachthor1 10 ай бұрын
Anyone wearing new balances, basketball shorts and a camo tshirt has my sub, no questions asked.
@MattsShop 10 ай бұрын
Haha thanks, I appreciate it!
@beachthor1 10 ай бұрын
@@MattsShopthis series is excellent, keep up the great work!
@dieselsforlife3847 4 жыл бұрын
Matt’s shop, thanks for not using starting fluid. I call that death to a diesel in a can. More in likely it’s broken rings. Or bad valves. But you can put oil in the injection holes and do compression test again to find out. I use atf for that. It could be stuck rings. But doubt that if it was running and quit. If it over heated then rings or cylinders.good luck. Glad to see it didn’t go to scrap yard.
@MattsShop 4 жыл бұрын
I never use starting fluid on anything. In my mind, if it doesn't start on its own then it not fixed enough lol. Everyone keeps saying blown head gasket, but I'm pretty sure the rings are broken.
@farmhandluke5182 4 жыл бұрын
Congrats on the free tractor!! Just found your channel, great to see you fixing the little tractor, thanks for the video!
@MattsShop 4 жыл бұрын
Thx, for the support!
@robstirling3173 4 жыл бұрын
As you have made up that adapter for the comp tester, just connect it to an airline with that cyl on TDC compression stroke and listen to intake/exhaust/ oil filler to find out where the air is going. There's your problem!
@MattsShop 4 жыл бұрын
Woah, that's a GREAT idea! Thx!
@Rayburn_bassin 7 ай бұрын
Diesel last for a long time just throwing that advice! I parked a 7.3 diesel for 3 years and had a full tank and it started right up and drove it until empty with out a problem
@MattsShop 7 ай бұрын
I know it does. The engine was suspected blown so I got fresh diesel. You never know if someone put gas in it by accident or some weird additives.
@8.3leader15 Жыл бұрын
Just found you through the engine rebuild of this tractor. I look forward to watching the whole series. Subbed. Its fun to see the begining when i already know how it ends!
@MattsShop Жыл бұрын
Thanks man. I appreciate it
@calebp2743 4 жыл бұрын
Got the same tractor gave to me it sat our in the rain for 25 years fired right up I love these yanmars
@MattsShop 4 жыл бұрын
That's good to hear for when mine is running.
@tedh9980 3 жыл бұрын
Cool, I have that same machine. Good to see another one.
@MattsShop 3 жыл бұрын
Glad to hear there is a lot of these tractors out there.
@benhowe5506 4 жыл бұрын
Hey Matt, nice little tractor buddy. I think you did a great job going through all the nessessary system's and inspecting everything well. I think it's a great little project mate. I can't wait to see your next video. Stay safe and well buddy. 👍🤝🤠🇦🇺
@MattsShop 4 жыл бұрын
Thanks man! I really appreciate it. You get it!👍
@johnymckinnon8756 2 жыл бұрын
Very good.
@countryboycharlie9793 2 жыл бұрын
There’s a gasket goes between the injector and head it might be leaking 🤷🏼♂️
@MattsShop 2 жыл бұрын
Good guess. but it was more than that.
@aaronboatright1 4 жыл бұрын
Smart young man! A very thorough job and nice video
@MattsShop 4 жыл бұрын
Thanks! I appreciate that you appreciate my thoroughness lol
@buzzherring8646 4 жыл бұрын
Video was good I'm glad your gonna rebuild it its a really nice tractor
@MattsShop 4 жыл бұрын
Thanks man, yea it is!
@principle_lecture 4 жыл бұрын
tries to turn the engine at 12:24. Just so you know.
@donnichols93 9 ай бұрын
I have a 1700 model Having saying problem. It got hard to start in, no start. I'm down to checking out the compression. Your video was real helpful on that.. Ann about the compression of release.. I have Did the outside check.. Almost certain it probably is low compression. Do you wanna rebuild the tractor for me? Ha ha, I do have a cup of mechanics around here MaryvilleTennessee.
@Darkness_Blaze19 Жыл бұрын
Hey man new subscriber I love seeing these types of videos I revived a 60s lawn chief and a Dixon 304 from a. Junkyard and they both run and drive
@jamestenbroeck3077 3 жыл бұрын
Are you still going to rebuild this motor? That would be extremely interesting to watch some of it!!
@MattsShop 3 жыл бұрын
Yes, I will be rebuilding it very soon.
@scottc0510 4 жыл бұрын
SWEEEET little tractor! I'm not a mechanic, but I'm suspecting a blown head gasket.... especially since BOTH cylinders have low compression. I also I noticed what appears to be evidence of a coolant leak over a broad area between the head and block deck... A blown head gasket could also be the cause of low coolant in the radiator. Hope that's ALL it is and you have a good engine that can be salvaged.... :-)
@MattsShop 4 жыл бұрын
Thanks! I really hope that's the only thing wrong with it. I haven't gotten the head off yet. That's the next step. IDK though, there was no coolant in the oil???
@scottc0510 4 жыл бұрын
No.coolant in the oil- probably a matter of engine and oiling path design, combined with .where the gasket is blown out. Loosen the oil drain plug just enough to get seepage and see if you get water or oil.. :-)
@BRI33NOR 4 жыл бұрын
Just first thought, is the decompression lever in the start and run position ?
@MattsShop 4 жыл бұрын
Yes, tired it both ways. On and off.
@hugokeeble2933 4 жыл бұрын
Because both of the cylinders low compression and it had no coolant it is very likely to be a head gasket which are rather common online so I hope you can get her to run again
@MattsShop 4 жыл бұрын
I think someone tried to rebuild the engine and did it wrong. The evidence is that there is red RTV silicone all over the engine. I hope it's just the head gasket. Oh, it'll run. Just a question of how much work I gotta do👍
@getonlygotonly Жыл бұрын
not to be a jerk but first thing you should have done is get that compression release control working properly. those engines are tough and last a long time if maintained
@MattsShop Жыл бұрын
It's the first thing I checked. I ruled it out in about 2 seconds.
@utubota5522 3 жыл бұрын
Yanmar makes a great tractor (used to make all of JD compact tractors). Yanmar marine diesels are prolific and very reliable. This machine is worth saving.
@MattsShop 3 жыл бұрын
Exactly, everything you said is 100%. I have seen the John Deere/Yanmar combos. Yanmars are awesome Japanese quality.
@donaldholcombe6752 Жыл бұрын
HEY, DA. Check the Compression Release and the Valve Lash . VL was what was wrong with my 1500 3 cyl !
@michaeldominy2084 Жыл бұрын
Hi Matt, I watched a video you did on the rewind of a pull cord on a sthil chainsaw. When you went outside to start it I noticed the pull cord looked difficult to pull, but you did manage to start it like that, now I have a situation where my pull cord is like that but much harder to pull and am unable to start the saw, would you have any ideas on what I should do to make it easier.?
@warne28 4 жыл бұрын
Injector 2 was atomising well but injector 1 was squirting like a peeing cherub. In any case they’re both banjaxed now that you took them apart. No point in trying to repair injectors unless you have a pop tester and the set up data. All that aside, your head gasket is blown. Keep learning, you’ll get there 👍
@MattsShop 4 жыл бұрын
I'm already "there"👍. One fitting was loose that's why that injector dribbled. I put the injectors back together the same way they came apart. No mixing of parts between the two. The shim stacks where put back EXACTLY as they came apart. They are going to someone with a pop tester if the thing doesn't run right after I fix it.
@aslmx1918 Жыл бұрын
I’m going to look at one of these soon. Hope it works out
@MattsShop Жыл бұрын
Let us know what you find!
@dieselsforlife3847 4 жыл бұрын
Smart man! I always say if it doesn’t start on it’s own something is wrong with it. Could be valves as well. I have seen even the compression release get out of adjustment to cause pore compression. Or carbon stuck the valves. Could be easy fix or pulling pistons out. Do you hear any air ex caping from exhaust or intake side? If no take oil cap off and try to hear if air is ex caping from the pistons. Oil should raise compression up. Would like to know what you find.
@MattsShop 4 жыл бұрын
Exactly, I don't even own any starting fluid. Hopefully it is something simple like a head gasket. It's not the valves or a piece of carbon. I'm sure of that.
@jerrypeal653 4 жыл бұрын
I’d take it head gas easy only 2 cylinders easy rebuild if needed. Fun project!
@MattsShop 4 жыл бұрын
Should be easy either way!
@joserodriguez-vp7nf Жыл бұрын
Hi Matt , a three cylinder yanmar with the same injectors. Im getting no deisel in the fuel line back to the tank . Im getting the injectors tested , it starts up fine but after losing power one day i noticed i was making oil and had bad blow by , what da ya reckon iscausing my return line to not be working its not blocked. Thanks from Australia, love ya work mate
@AndyM. 3 жыл бұрын
HA!!! When I started watching this, I was like " SWEET Anthony Kiedis of the R.H.C.Ps got a sweeeeeeeeet tractor! I never knew he was so knowledgeable about tractors."
@robertdonald4409 3 жыл бұрын
It's called moss ( the green stuff)
@nl9452 2 жыл бұрын
Can you suggest where online to find parts lists? My old Yanmar YM236d glow plugs, tyres & parts...
@MattsShop 2 жыл бұрын
Here's a YM236D parts manual I uploaded for you :) drive.google.com/file/d/19EQqr9V_K8byeKlt5OcN_CTfrDjvjxRw/view?usp=sharing
@joeymarcou5875 3 жыл бұрын
Time to fire up the pressure washer *electric pressure washer * lol
@MattsShop 3 жыл бұрын
Haha yea, fire it up! (Plug it in)
@jamesdowell1034 2 жыл бұрын
Having problems with my ym1300d hydraulic fluid is leaking underneath the transmission what do I need to fix this
@MattsShop 2 жыл бұрын
Is it leaking from the triangle shaped plate under the transmission? There is a filter, o-ring, and gasket in there.
@CayRome 4 жыл бұрын
Great video!
@MattsShop 4 жыл бұрын
Great comment!
@beast64375 3 жыл бұрын
Just rebuilt my ym2000 a month ago, I'll give them one thing, their reputation of being nearly indestructible is no exaggeration. Just don't let it ever overheat (>160 degrees F), and never use ether (instantly kills the rings and scars the liners). Ask me how I know, lol.
@MattsShop 3 жыл бұрын
Nice! Any tips you'd like to share with anyone rebuilding a Yanmar engine? For sure, the starting fluid is a big no no. I don't even buy that stuff.
@beast64375 3 жыл бұрын
@@MattsShop aside from the obvious things like taking your time with cleaning everything and assembly, best advice i have is to use lithium grease before you fire it back up. Also, be aware that there are a ton of interference fit parts internally, so freeze the new wrist pins and pistons beforehand, and don't force anything together, should all just slide apart/together by hand when cold. I let everything warm up to room temp once it was together before compressing the rings. Also, there's 2 o-rings (square rings if its factory original) per sleeve. According to the guys at hoye tractor, the sleeves don't need to be changed unless they're scarred or pitted, new rings will make it cheaper on a rebuild. Personally, I'd buy 4 sets of rings and 2 new sleeves if you're going to go that route, just in case. Total price on my rebuild was about $800 in parts at the time.
@ronkilmer8991 4 жыл бұрын
Like the video,, would like to see the rebuild, Yanmar for the most part makes a good product, maybe for a the money will be ago rebuild
@MattsShop 4 жыл бұрын
Stay tuned! It's getting rebuilt!
@averybryant 4 жыл бұрын
Did you check the decompression valve? My ild yanmar really similar to that one had one. Ended up needing new rings and cylinders to run but they are great and tough tractors
@MattsShop 4 жыл бұрын
Yes I did. Great info, that's what I suspect is bad.
@averybryant 4 жыл бұрын
Matt's Shop 👍 good luck with it. Mine was over heated and then parked before I bought it. The cylinders we ovaled and the piston rings nearly had a 1 inch gap!
@rickkatz4692 Жыл бұрын
Matt, Could you do a vidio on adding a hydraulic top link to your yanmar. Thanks.
@MattsShop Жыл бұрын
I don't know. I plan on doing a loader and maybe a 4x4 conversion when I find the parts.
@Rhosticks 4 жыл бұрын
Nice!
@MattsShop 4 жыл бұрын
Thanks!
@doctormcboy5009 3 жыл бұрын
i had one of these it was great just 2 hard to get on and off
@MattsShop 3 жыл бұрын
Yea, it was definitely designed for petite Japanese people for sure.
@jamesmoore3346 3 жыл бұрын
I was a tractor mechanic for 15-16 years back in the 70's- 80's. John Deere's little tractors were made by Yanmar...the 650,750,850, 950 on up to 30 hp were all just Yanmars.....
@MattsShop 3 жыл бұрын
That's good to know. I wonder if the engines were the same at all. I'll have to check into that.
@jamesmoore3346 3 жыл бұрын
@@MattsShop Deere did change specs in some areas, for the most part though you could exchange parts. Where they made them different was coupling the different components together as in a 650 deere may actually have the transmission of another equal or larger model from the yanmar. Most if not all regular maintiance items will interchange....I don't know where the new deere's are made, I've been gone from the tractor world for 21+ years. Those little yanmars were kubota's competition...good tractors. There was a time no matter the brand most 30hp and lower were coming out of japan. There are a few exceptions.
@iwillnotcomply7145 3 жыл бұрын
I have a Yanmar YM2010d These are great little tractors and pretty easy to fix. However, there are a few Models to avoid. Check out Hoye Tractor for your Yanmar needs and the models to avoid. Very helpful people there too.
@MattsShop 3 жыл бұрын
Yes, they are. I realized that you should avoid some models. Luckily this YM2000B has nearly every part available.
@lukekazmir1197 3 жыл бұрын
I was given a yanmar 1702D with a front end loader, how easy is it to get parts
@MattsShop 3 жыл бұрын
Very easy! I get parts at hoyetractor.com
@WSchroder100 4 жыл бұрын
Looks almost NEW!
@MattsShop 4 жыл бұрын
I'm gonna get it as good as new!
@tonyfremont 4 жыл бұрын
Haven't watched the whole video yet, so I'm going to guess. No compression. My money is on a blown head gasket from a warped head. Second guess is valves not seating, but I doubt it. No coolant in the cooling system is the smoking gun. Update, burnt valves is my new guess after seeing the compression test.
@MattsShop 4 жыл бұрын
Alright, we'll see who's right. I say it's bad/broken rings, pistons, and/or sleeves. The valves/seats probably need to be trued up too!
@andrewsumma9694 3 жыл бұрын
I have an 18HP Yanmar diesel and after power washing, it will not start. Starter will not engage as ig the shifter is not in Neutral. Any ideas, Please ?
@MattsShop 3 жыл бұрын
There are no electronic ignition parts on these tractors. I'd start with the key ignition switch. I believe there is a starter solenoid. Probably got some water in somewhere.
@andrewsumma9694 3 жыл бұрын
@@MattsShop Thank you .. I did not get water into the ignition switch. I crossed the solenoid connections and it works but it does not engage the starter. There are also fuses mounted on the block that are good fuses. i am confused.
@jasonb4350 4 жыл бұрын
The right injector was working fine but the left one was not! Right was a fan spray left was spurting out
@MattsShop 4 жыл бұрын
The fitting was loose. If you look closely it was dripping.
@johnkoury1116 2 жыл бұрын
That is a beautiful tractor!!
@MattsShop 2 жыл бұрын
Thank you!
@johnkoury1116 2 жыл бұрын
@@MattsShop Are you in Florida? I am in Pa. I went to USF for my PhD in chemical engineering.
@dieselsforlife3847 4 жыл бұрын
Usually head gasket only takes out one cylinder. Should still try to start on one or the other. The two cylinder diesels will run on one cylinder. Unless it blew out in between the two. But both should be same compression if that’s the case. Fill radiator up with water and turn it over. If you see water coming out of the injector holes you will know. Or put injectors back in and see if you get air bubbles in the radiator. I would believe on the pistons aren’t happy or the rings. Probably got really hot is my guess. But not there myself so just guessing.
@MattsShop 4 жыл бұрын
When I took the valve cover off I could see puffs of air coming from where the head meets the engine block. I hope it's the head gasket, but the oil had ZERO coolant in it. Unless it blew out in a way that didn't compromise the water passages sealing. I still think it's the rings/pistons.
@RustyPumpkinRanch Жыл бұрын
Using a snatch block will help a lot and is much easier on the winch.
@MattsShop Жыл бұрын
Great idea!
@olallaeddy 2 жыл бұрын
i looked at a YM2210D tractor today and the oil is grey like and nothing in the radiator. Should I run or pick it up for 2k. It runs and drives
@MattsShop 2 жыл бұрын
It makes me worry. Is the oil milky? It could be a blown head gasket. I'd say $2,000 max unless it does have mechanical issues. Ideally you would do a compression test and radiator pressure test. Difficult to do "in the field".
@olallaeddy 2 жыл бұрын
@@MattsShop he called and said he changed oil and filled radiator and running good. I think it might need more work like rebuild kit. Then everything else is 40 yr old or more. He is aksing $8K with new loader, box blade and brush hawg.
@MattsShop 2 жыл бұрын
8k is a lot for that especially if it has mechanical issues. I wouldnt pay that much.
@user-mn1hl3kb5c 3 жыл бұрын
хороший трактор надежный и простой лайк и удачи
@MattsShop 3 жыл бұрын
Thanks!
@patrickpatterson170 3 жыл бұрын
Very good video!!!
@MattsShop 3 жыл бұрын
Very good comment. Thx
@janramonmartin 4 жыл бұрын
I've had the same thing happen before when the decompression lever had gotten into a position it shouldn't have been in (the lever was 180 degrees, partially decompressing and it wouldnt disengage without being flipped around manually)
@MattsShop 4 жыл бұрын
I wish it was that simple, but I pulled the valve cover and disconnected the decompression cable. Still bad compression:(
@janramonmartin 4 жыл бұрын
@@MattsShop its possible that the lever itself is stuck, can you easily remove the lever that the cable was connected to?
@janramonmartin 4 жыл бұрын
otherwise, this would be a good tractor to conver to electric
@frankdeegan8974 4 жыл бұрын
Everyone has to start somewhere. Haters going to hate, as long as someone is bitching you know you must be doing it right. Your shop your rules and leave it at that
@MattsShop 4 жыл бұрын
I was told it had low compression and I suspected low compression. I do things differently. I assume I know nothing until I prove the problem. Otherwise you are throwing parts at the thing, never really diagnosing anything.
@joesask857 4 жыл бұрын
subscribed thanks man
@MattsShop 4 жыл бұрын
Thanks for the sub!
@gccarcit 4 жыл бұрын
Nice
@MattsShop 4 жыл бұрын
Thanks! Stay tuned!
@daviddudley1655 4 жыл бұрын
Do a second test with oil in the cylinders to see if the pressure is different from the first one or not. If it's different than it's bad rings If it's the same then it's a blown head gasket
@MattsShop 4 жыл бұрын
I tried the oil trick. It didn't help. Pretty sure the rings are broken.
@pete-mate3524 4 жыл бұрын
@@MattsShop Do not, Do not, Do not use the "ol' oil trick" on a diesel engine!!!! This diagnostic procedure is only for petrol engines.
@thomastaylor5766 Жыл бұрын
Pull the compression release.
@MattsShop Жыл бұрын
It was on.
@davideuton5361 4 жыл бұрын
unload with jack under front of trailer. put tractor in high and push it back and forth. will show if engine is locked and if it has compression. old school. tell by cranking no compression.
@MattsShop 4 жыл бұрын
Nice old school trick.
@rabbit1612 4 жыл бұрын
ues some Vinegar to clean the radiaor,
@MattsShop 4 жыл бұрын
Check out part 2!
@genefortney9133 3 жыл бұрын
Tough break!
@MattsShop 3 жыл бұрын
Yup, it was free though!
@natevanlandingham1945 3 жыл бұрын
That's a YM200B. A great unmolested Yanmar. Watching now but I'm sure that one will run with little work. Worst case someone over heated it and blew or cracked the head. Just a gasket is not a bad job. Don't use starting fluid you will break rings and blow holes in pistons.
@MattsShop 3 жыл бұрын
Yea, these Yanmar tractors are good, but the parts aren't cheap lol
@natevanlandingham1945 3 жыл бұрын
@@MattsShop I have found the parts to be pretty cheap? Used parts for them are not that cheap like if your trying to buy a used part compared to old american iron but when your buying parts at Hoye I think parts are pretty cheap for them?
@jasperdunaway878 2 жыл бұрын
how to install a power pack on a 1994evenrude motor
@seansysig 4 жыл бұрын
Lost compression look at the valve cover gasket all that rust.
@wm973 4 жыл бұрын
I doubt it will start with that compression because not enough heat is generated. Diesel engines are around 20:1 as my old grey matter remembers. Ya need to replace the head gasket. Then put a little oil in the cylinder and turn it over a few times. This will help seal the rings. Then see if this brings the compression up. You should see a fine spray out of the injectors. If it looks like a squirt gun spray it won't start. That piston in the injector is super close tolerance so be careful. The shims regulate the amount of fuel that is sprayed into the cylinder so don't mix them up. Looks like the pump is working and that's usually the first problem. Make sure the filter's and/or strainer's are good on the pump. Good luck
@nunyayourbusiness7327 4 жыл бұрын
free tractor is a win if it doesn't start
@MattsShop 4 жыл бұрын
It is if it's worth fixing and you film it lol
@DS-Turbo 3 жыл бұрын
Two cylinders having low pressure like that would be suspect. Seems like it'd be an easy fix.
@MattsShop 3 жыл бұрын
You would think...Wait until you see the rebuild video.
@cressgf 3 жыл бұрын
Do you still have that tractor around? I have one and need a part.
@MattsShop 3 жыл бұрын
I'm rebuilding the engine as we speak.
@cressgf 3 жыл бұрын
@@MattsShop Awsome! This is a neat little tractor! I have the tiller too. I just rigged up a snow plow! good luck!
@darrenhughes8106 4 ай бұрын
@@MattsShopgreat video. Can you tell me what the head bolts need to be torqued to? Hoye apparently changed hands and have no info and I cant find my service manual. Thanks
@wesleycallison2079 2 жыл бұрын
Fix your compression release
@MattsShop 2 жыл бұрын
Nope, not the problem.
@dieselsforlife3847 4 жыл бұрын
Hopefully not cracked head. With not knowing what it looks like under valve cover. Should be around the head and block meets is where you should be seeing air puffing out. Not under valve cover. Could be wrong tho.
@MattsShop 3 жыл бұрын
I hope not. That gets expensive FAST!
@doylerabjohn3435 2 жыл бұрын
Great video, What year is that tractor. I don't much about Yanmar tractors.
@MattsShop 2 жыл бұрын
These old Yanmars don't really have "years" they were all pretty much the same throughout the years. This was built somewhere between mid 1970's to mid 1980's.
@doylerabjohn3435 2 жыл бұрын
@@MattsShop Thanks
@Johndonvan861 4 жыл бұрын
The engine is done it needs to be fully reconditioned, c"mon if it had a been good you wouldn't a got it for nothing.
@MattsShop 4 жыл бұрын
Yup, pretty much sums it up!
@adamspring9275 4 жыл бұрын
It's worth fixing you can rebuild it real cheap
@MattsShop 4 жыл бұрын
Yesssir
@brianhuneycutt8264 4 жыл бұрын
Decompression lever is on
@MattsShop 4 жыл бұрын
Nope, won't start both ways.
@jacobsadventures8299 3 жыл бұрын
Check the decompression lever make sure it isn’t dtuck
@jacobsadventures8299 3 жыл бұрын
Stuck
@MattsShop 3 жыл бұрын
Disconnected it. It's blown.
@byronpool7003 4 жыл бұрын
make sure the compression rellease is off
@MattsShop 4 жыл бұрын
Yup, did it both ways!
@jamessmith7691 4 жыл бұрын
Good opener up and get a bible for the tractor.
@MattsShop 4 жыл бұрын
Service Manual? Lol never heard it called that.
@michaelstapleton5510 4 жыл бұрын
diesel is good
@michaelstapleton5510 4 жыл бұрын
looks to me likr your not getting any fuel to the ejector
@MattsShop 4 жыл бұрын
The fitting was loose
@martinhierro5198 7 ай бұрын
Hey bro where you live? I have yanmar too. And i have question
@MattsShop 7 ай бұрын
I live in the South. What's your question?
@charlesboston1 2 жыл бұрын
valves are stuck open
@MattsShop 2 жыл бұрын
Guess again!
@formulas1130 4 жыл бұрын
Just pour some thick oil down the cylinders let it sit for bouta week then try again
@MattsShop 3 жыл бұрын
Tried it. Still had bad compression.
@michaelmccullough9187 2 жыл бұрын
Your compression releases down Pull It Up
@austinhowze6280 4 жыл бұрын
Decompression lever if you have a weak batter hold lever and turn key when its spinning fast let go of the lever and she starts
@MattsShop 4 жыл бұрын
The lever on this thing is a cable that is either out or in. You can't just turn it on or off easily.
@austinhowze6280 4 жыл бұрын
@@MattsShop that's cause yours is old
@roberttrevorrow5968 4 жыл бұрын
Step on the clutch to start.
@MattsShop 4 жыл бұрын
That doesn't effect the engine.
@michaelstapleton5510 4 жыл бұрын
if it drain in to the engine the oil would look muddy
@MattsShop 4 жыл бұрын
Nahh, it's nice and black oil.
@johnbourgeois1414 4 жыл бұрын
You should have tried starting fluid at first try
@MattsShop 4 жыл бұрын
No way I would ever use starting fluid on a diesel.
@ellobo1326 2 жыл бұрын
Moron gives advice that destroys Diesel engines. 🤦🏻♂️
@BRI33NOR 4 жыл бұрын
Yanmar motors used in many sea going fishing boats. Those guys no what's reliable..
@MattsShop 4 жыл бұрын
That's what I've seen they are used in a lot of larger boats and heavy equipment.
@michaelstapleton5510 4 жыл бұрын
put your compression relief valve closed
@txsidewinder 4 жыл бұрын
Compression release is open
@MattsShop 4 жыл бұрын
Did it both ways, still had low compression.
@txsidewinder 4 жыл бұрын
I see sure would have been sweet if it could have been that simple 👍
@MattsShop 4 жыл бұрын
I know right! It was stuck open when I got it. I was sure that was the problem.
@jtamsett 4 жыл бұрын
Dissle
@green1394 3 жыл бұрын
Amazon,,wins again!!!!
@mikekehoe2927 4 жыл бұрын
do you have a clue?
@MattsShop 4 жыл бұрын
What?
@gwilliammaggs 4 жыл бұрын
I don’t think he does Mike, every time he says “I don’t know “ take a drink, the video is easier to watch.
@gordonashumway 4 жыл бұрын
People who don’t know what they are doing, shoiuld not work on tractors.
@MattsShop 4 жыл бұрын
Good thing I know what I'm doing. Check out the rest of the channel!
Nikita Zdradovskiy
Рет қаралды 6 МЛН
Restoration King
Рет қаралды 1,7 МЛН