Abrams X - the next generation of badass! part 1

Рет қаралды 20,321

8 ай бұрын

This time Abrams X, which is not a prototype of the next generation of the abrams tank, but a technology demonstrator. The new solutions will undoubtedly be used in the construction of the tank of the future, as well as in subsequent versions of the conventional M1 Abrams.
The unmanned turret is equipped with a 120 mm XM360 smoothbore cannon, powered by an automatic loader. In addition to super armor, the safety of the Abrams X is enhanced by the Trophy active vehicle protection system and laser radiation and the launch of anti-tank guided missiles warning system.
The tank also has new digital imaging systems, as well as a new fire control system. There is a remotely controlled Kongsberg Protector RS6 weapons module with a 30 mm M230 automatic cannon, enabling the destruction of unmanned aerial vehicles.
The crew is located in an armored capsule in the hull and it was reduced from 4 to 3 soldiers. The Abrams X uses a hybrid power unit - combustion engine and electric motor. In addition, the tank has a hydropenumatic suspension.
The model released by Amusing Hobby is a great product for a quick project for a few evenings and the opportunity to use your own ideas for painting and weathering. For me, this is another project, next to KF51, that powers a number of my models that represent prototypes. This series show my modifications and ideas used to turn this kit into interesing piece of modelling stuff! I can say that this is the next generation of badass!
www.modellersworld.eu/
⬇️ ⬇️ ⬇️ ⬇️ ⬇️ ⬇️ ⬇️ ⬇️ ⬇️ ⬇️
Support my work and be my Patreon - / coldemonspl
DON'T CLICK THIS! - tiny.pl/9g5bb
Instagram: coldemonspl
coldemons.blogspot.com/

Пікірлер: 80

@davidstone-haigh4880 8 ай бұрын

I really like how you customise your builds. Very inspirational. looking forward to the painting stage.

@coldemonspl 8 ай бұрын

Thank you very much mate! I highly recommend you to join the Patreon to see more, exclusive to the Patreons :)

@anniepoulton8501 8 ай бұрын

Another great master class in great modelling,with great tips too, well done coldemonspl 👍👍👍👍

@coldemonspl 8 ай бұрын

Thx a lot mate! :)

@JuergenGDB 8 ай бұрын

I totally dig how you give us the mil size of your drill bits used.... MASSIVE help thank you, as I really never know how small these bloody holes should be when drilling.

@coldemonspl 8 ай бұрын

No problem! Thank you very much! :)

@JR-ud3zi 8 ай бұрын

Hi Lukasz,another stunning build from you ,I have this coming for Christmas . I have a plan on my camo scheme. Looking forward to seeing how you do yours.

@coldemonspl 8 ай бұрын

Thank you very much mate! I highly recommend you to join the Patreon to see more, exclusive to the Patreons :)

@clarkbarrett6274 8 ай бұрын

Super jazzed to see this and I just ordered the model off Ebay.

@coldemonspl 8 ай бұрын

Thank you very much buddy! :)

@DutchDaveModels 8 ай бұрын

You’ve made some interesting changes and additions to this build ✨👍✨

@coldemonspl 8 ай бұрын

Thank you very much buddy! :)

@willthorson4543 8 ай бұрын

Gonna be the debbie downer...you gotta take off the antennas on the rear hull. That's never gonna happen. Tanks are constantly moving, when it's time to refuel, a tank will swing it's turret to its rear( US abrams) to make it easier to refuel. Those antennas would snap of. Why? Because they don't bend. The base has a spring. So they can be pulled down and always at an angle. As a fellow crewman of modern armored vehicles in the U.S. military. Antennas have to be in an area where crew can easily the them down or remove them. Yes. It looks cool, but it wouldn't happen.

@coldemonspl 8 ай бұрын

You're right - it looks very nice but I will check the new place on the turret to make it exactly as you said! Many thx for this! :) Will, it would be very nice to see you in my Patreons group! :)

@calvinfarrelly5656 8 ай бұрын

Excellent work as always!

@coldemonspl 8 ай бұрын

thx :)

@detlevwalter7495 8 ай бұрын

Very interesting model. This is what the tank force will look like in the future.👍

@coldemonspl 8 ай бұрын

Thx a lot mate! :)

@pawelwalkowski1791 8 ай бұрын

That's the beauty working on let's say prototypes 😁😁😁 you can do whatever you like and pretty much no one will complain about. Currently I'm working on Tiger Model(4628) Leopard 2 Revolution so your video gave me a few ideas. Have fun with your,Łukasz 👍👍👍👍😃

@coldemonspl 8 ай бұрын

Many thx Paweł! Zapraszam na Patreona - Polaków jest zadecydowanie za mało! :)

@pawelwalkowski1791 7 ай бұрын

@@coldemonspl Dziękuję za zaproszenie,na pewno po nowym roku nie omieszkam dołączyć. Zastanawiałem się czy nie wrócić na Flory forum ale tutaj wydaje się bardziej interesująco. Pozdrawiam i wesołych świąt 🥳🎄🎁

@paulshri8609 8 ай бұрын

Looking good so far

@coldemonspl 8 ай бұрын

Thank you very much buddy! :)

@modellersworldtv 8 ай бұрын

Yeah! New episode!

@coldemonspl 8 ай бұрын

Many thanks! :)

@lesthiele4921 8 ай бұрын

Hi Lukasz, that certainly is a 'space age' looking Abrams, but it is carrying on the tradition of one of the best MBT, so this tanksvwill be no exception, looking forwarc to the next update, best regards from Australia 👌👍👌👍👌👍

@coldemonspl 8 ай бұрын

Many thanks! :)

@WWTKGG 8 ай бұрын

It was a product that I was going to buy later, but it helped me

@coldemonspl 8 ай бұрын

Thank you very much buddy! :)

@timothywood4402 8 ай бұрын

Beautiful work as always.

@coldemonspl 8 ай бұрын

Thank you very much buddy! :)

@Cochise_Chiricahuas 8 ай бұрын

It looks great ! Thanks for your work :)

@coldemonspl 8 ай бұрын

Thank you very much mate! I highly recommend you to join the Patreon to see more, exclusive to the Patreons :)

@tonycooper1235 8 ай бұрын

Out standing work as normal I really like the way you put across your modelling skill, I have only been modelling for two years now and I have learnt so much from your videos, keep up the great work.

@coldemonspl 8 ай бұрын

Thank you very much mate! I highly recommend you to join the Patreon to see more, exclusive to the Patreons :)

@fjdexx 8 ай бұрын

Hello my friend. A very nice tank and i can´t wait to become my preorder box. Hope of many more next gen tanks. I´m excited about the painting and aging.

@coldemonspl 8 ай бұрын

Thank you very much buddy! :)

@stardude2006 7 ай бұрын

Sweet ! 😎

@coldemonspl 7 ай бұрын

Thx a lot mate! :)

@orni2490 8 ай бұрын

to modern for me but really nice Model and Detailwork

@coldemonspl 8 ай бұрын

Thx a lot mate! :)

@albertotraverso6061 8 ай бұрын

looks really interesting 👏👍🙂

@coldemonspl 8 ай бұрын

Thank you very much! :)

@noelmorris5807 8 ай бұрын

nice one

@coldemonspl 8 ай бұрын

Many thanks! :)

@KGmodels 8 ай бұрын

Modern armour is a subject I would rather drop out for earlier Tanks,such as ww2.However,something like this could be interesting in some form of what if I guess.Anyways,Looks great my friend!

@coldemonspl 8 ай бұрын

Thank you very much! :)

@michaelr138 8 ай бұрын

Super odcinek👍dzieki.

@coldemonspl 8 ай бұрын

Dzięki! :)

@windomearle5396 8 ай бұрын

Pięknie!

@coldemonspl 8 ай бұрын

Dzięki! :)

@nclsprn4584 8 ай бұрын

maybe EMBT one day 😍😍😍😍

@coldemonspl 8 ай бұрын

Maybe :)

@lewisconklin7252 8 ай бұрын

Cool

@coldemonspl 8 ай бұрын

Thx a lot mate! :)

@Mauscmkwk 8 ай бұрын

They used to include workable suspension

@coldemonspl 8 ай бұрын

There is always some option to make it :)

@chris_obarski 8 ай бұрын

Wow, that's some space ship not a tank! 😁

@coldemonspl 8 ай бұрын

Thank you very much buddy! :)

@allanrichards3752 8 ай бұрын

This looks a good model if you are into modern tanks. Are the wheel rims supposed to be the tyres so it makes it easier to paint them?

@coldemonspl 8 ай бұрын

Yeah, we can say something like this about rims. Thx! :)

@joker120007 8 ай бұрын

i need to get that tool you use to bend the handles

@coldemonspl 8 ай бұрын

It is very usefull! :) Thank you very much! :)

@the-creech4790 8 ай бұрын

👍👍👍

@coldemonspl 8 ай бұрын

Many thanks! :)

@colinizatt7323 8 ай бұрын

Nice build and subject! I have ordered mine online. Please can you give me the master part numbers for the antenna/ communication masts please?

@coldemonspl 8 ай бұрын

It ia GM-35-017 - this one from the back. :)

@thorgal1976 8 ай бұрын

...a jak wymiary w porównaniu np z m1a2? Miałeś okazję porównać??

@coldemonspl 8 ай бұрын

Nie miałem szansy na porównanie. :)

@ChristianSchroter 8 ай бұрын

Hello mister cold. I have got a question to you.i have an tamiya abrams 1a2 iraqi freedom in my stash.the question is:are the track measures the same as abrams x.so i could use the rubber tracks included in abrams1a2 kit at an abrams x.with sticky greetings. Christian

@coldemonspl 8 ай бұрын

They should be the same. I dont have this kit from Tamiya and can't say it with 100%. :)

@ChristianSchroter 8 ай бұрын

Thank you mr.cold.

@clarkbarrett6274 8 ай бұрын

The track lengths are the same but the tracks are actually not. AbramsX uses a newer Diehl track. The M1A2 track should fit, but it wouldn't be accurate.