Рет қаралды 22,765
ABR Electric Installing a Flush Mount FS140 Seimens Whole House Surge Protector
If you live in an old home, there's a good chance it lacks any grounding or that the two-pronged plugs don't include a grounding wire. These methods can't shield your pricey gadgets from the power surge. And do you know that a power surge might harm your numerous electronic devices in less than a minute? An SPD (surge protector device) is, however, an option.
Installing a Flush Mount FS140 Seimens Whole House Surge Protector is one way to go. This job will take a little more time than installing the FS140 on a wall, but it will provide you with better protection and a cleaner look.
Here are the basic steps for installing your FS140:
1. Use a voltmeter to check the voltage and ensure that the SPD is correct. You can find more information on specifications and wire-outs in the Data Sheet.
2. Determine Mounting location - weather resistant equipment may be required if this is an outdoor installation. The one shown in the video is an indoor install..
3. If SPD has optional Flush Mount Kit, pre-plan its installation.
4. Remove power from panel/source. Confirm panel/source is deenergized.
5. Identify breaker location and SPD location. Position SPD such that LEDs are best visible.
6. Mount SPD - weather resistant screws may be required.
7. Re-energize panel/source and test operation of FS140 by observing green LEDs.
8. If FS140 is installed in an equipment panel, make final connection to ground busbar.
If you have any questions or concerns about this process, please don't hesitate to reach out to ABR Electric in McKinney. We'll be happy to help you get the best protection for your home.
Though you can easily plug a surge protector in selected outlets, it is advisable to get all the outlets of your house covered. But how to install a whole-house surge protector? You can do that by installing an FS140 Siemens whole-house surge protector from ABR Electric in McKinney. FS140 is a type 1 SPD that helps in safeguarding your entire house against any external or internal power surges.
It is always better to take the help of professionals like ABR Electric for the installation of FS140 Siemens whole-house surge protector as they have complete knowledge about this product and will install it perfectly.
The warranty on the FS140 is 10 years, which is much longer than the standard 5-year warranty on most surge protectors. There are electrical anomalies that SPDs cannot protect against such as Sustained Overvoltages also known as Temporary Overvoltages (TOVs). However, FS140 is designed to withstand severe duty and attempt to protect their load until failure. If the SPD shows problems on startup, there is reasonable chance of bonding/grounding/misapplication issue. This permanently damages the unit. If not corrected, it might kill the FS140 . The single largest ‘killer’ of SPDs is reference to ground issues.
ABR Electric in McKinney will help you with the installation of FS140 Siemens whole-house surge protector so that your house is protected against any power surges. They will also make sure that the FS140 is properly grounded to avoid any reference to ground issues.
ABR Electric in McKinney is always here to help you with any questions or concerns that you may have about your FS140 installation. Give us a call today!
Why do you need a FS140 Siemens whole-house surge protector?
As we all know, an electrical surge can damage all your expensive electronic gadgets within few minutes. So, if you want to safeguard your home against any kind of electrical surges, then FS140 Siemens whole-house surge protector is the best option for you. Not only does it provide protection against external power surges but also safeguards your home against any kind of internal power surges.
FS140 Siemens whole-house surge protector is a type 2 SPD that is specially designed to safeguard your entire house against any kind of electrical surges. It comes with a LED indicator that lets you know whether it is working properly or not. Moreover, it also has a thermal overload protection that automatically shuts off the power supply in case of any overloading.
So, if you are looking for an effective and reliable whole-house surge protector, then FS140 Siemens whole-house surge protector from ABR Electric in McKinney is the best option for you.
ABR Electric in McKinney offers FS140 Siemens whole-house surge protector at the most competitive prices. So, if you want to install FS140 Siemens whole-house surge protector in your home, then contact ABR Electric in McKinney today.
ABR Electric
214-690-1941
abrelectric.com