Ac Blows Hot Air Only Fix

Ac Blows Hot Air Only Fix - On Any Car

Рет қаралды 833,825

6 жыл бұрын

heres a link where you can find A/C actuators, just look for your vehicle brand model and year
amzn.to/2PcWW2x
if you don't have Amazon, get a free 30 day trial and free shipping here:
amzn.to/2S4Aaeo
If this video helped you fix your problem and save some bucks, then support our channel! Any size donations are welcome!!! Its simple and quick just click the link and select amount.
www.paypal.me/GarageBoysSupport
Or check my store here:
/ @garageboys
Don’t miss the chance to be a proud supporter of a good cause!
Also like and SUBSCRIBE
-----------------------------
This video will show you your problem and how to fix it. It applies only if your cars a/c compressor is turning on and the pipes by the compressor get cold but in the interior the car blow hot heater air. In this video we are working on a 2006 Nissan Sentra. But this issue happens on any brand in any car and the vent producing the issue is always in the same spot.
Hopefully this will help and if it does please subscribe
for Business inquiries email me at: Garageboys281@gmail.com
Disclaimer: Due to factors beyond the control of GarageBoys, I cannot guarantee against improper use or unauthorized modifications of this information. GarageBoys assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. GarageBoys recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of GarageBoys, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not GarageBoys.

Пікірлер: 532

@GarageBoys 3 жыл бұрын

if this helped! help me back by supporting my channel here: www.paypal.me/GarageBoysSupport

@haitipapperi2932 3 жыл бұрын

I can do this on a Acura TSX also

@broktonharris2506 2 жыл бұрын

one way to fix this is to add a second wire to manually pull it back

@26alas 4 жыл бұрын

Thanks! Easy to follow, simple instructions, and you kept it real! 😉

@joeblk76 2 жыл бұрын

Just bought this old 2002 Nissan Sentra and it is doing the same thing. Thanks a bunch, here I am in 2021.

@rainebrown6161 5 жыл бұрын

Omg , I wish you were here so I could thank you personally. With your precise instructions I was able to fix my AC in the car today I know I saved a lot of money more importantly I didn't get ripped off. Thank you thank you thank you so very much. Please continue to make these videos for people like me💓

@GarageBoys 5 жыл бұрын

I’m glad I was able to help! Please help me back by liking and subscribing :-)

@Yakipharu 4 жыл бұрын

@flowerchild777 2 жыл бұрын

Raine Brown What makes and model of vehicle do you have? Thanks

@dblomvo7732 6 жыл бұрын

OMG I ves been looking for this for so long and the shop and mechanics couldn’t figure this out. Thank you so much. I will pray for you. God Bless You. How easy these mechanics rip you off. OMG.

@GarageBoys 6 жыл бұрын

dblo mvo Im glad it helped! help us back by subscribing

@southwestoutlaw2954 6 жыл бұрын

Garage Boys- I'm sitting in my car rite now trying to figure why my ac stopped blowing cold. Now only got air.. Will this work for a 97 Buick lesabre?? Got the ac going for the first time in 3yrs ran for about a month but stopped about a week ago

@GarageBoys 6 жыл бұрын

SOUTHWEST OUTLAW yes this will work but only if you are having this issue, sounds like your compressor stopped working, make sure your compressor turns on and the a/c pipes in the engine get cold

@southwestoutlaw2954 6 жыл бұрын

Garage Boys-- the pipes do get cold but it's not blowing out cold air. A.c. was blowing cold up until last week Tuesday.. thinking bout taking it to a shop today. Wat do u think?

@GarageBoys 6 жыл бұрын

Well if the compressor turns on, your pipes are cold and inside it blows hot air then your issue is most likely what I show in this video. The a/c actuator

@silverdemon87 5 жыл бұрын

I'm starting to think KZfaq is smarter than my mechanic lmfao.

@JR-ov4is 5 жыл бұрын

Haha!! For Real!!

@pepandeita9366 4 жыл бұрын

Ain’t that the truth lol 😆

@JR-ov4is 4 жыл бұрын

DEAD ASS!!!!😂

@antoinecooper9844 4 жыл бұрын

👌

@JujuBratuski 3 жыл бұрын

For real, I’ve done all my own auto work using KZfaq lol I e saved tons of money

@bigheadfenderguitar 3 жыл бұрын

Thank you for your clear explanation. I am going to try this and I hope it works. I will be looking at your channel in the future. Pleace and blessings to you!

@jesuslugo125 3 жыл бұрын

After months of no ac today I finally got it back thanks 🙏

@GarageBoys 3 жыл бұрын

Glad I could help! 😃

@Miller8424 5 жыл бұрын

Good Video! It's a common problem on various cars that's hard to see and find if you don't know what you're looking for. Good lighting on the actuator and letting everyone see how it works and why it's not changing from heat to cold.

@MrBlacky19853 4 жыл бұрын

I fixed my nissan pulsar the same way but I found the problem that you tried to fix with wd40. It's like brakes on a bike both ends of the cover on the wire need to be in a special groove so it can work. The actual problem is not the lever it is at the other end it has just come out of the groove so the wire is not pulling the lever. Open the center console and look underneath the aircon hot cold lever and you will see the problem straight away. I did mine yesterday and now both hot and cold works perfectly. Thank you for pointing me in the right direction.

@ksbear451 3 жыл бұрын

Any way you can show a video of your fix??

@MrBlacky19853 3 жыл бұрын

@@ksbear451 hey Heather sorry I won't be able to make a video for you as I have sold the car. It was a simple fix if you remove the aircon control levers and look at the back you will see the cables that join the lever to the vent and one side of the cable would have come off the track.

@flowerchild777 2 жыл бұрын

@@MrBlacky19853 VERY helpful, thanks

@matthewbarrett8995 5 жыл бұрын

Thanks for the help! I just did this on my Nissan Sentra and it worked. I'm not sure how you figure this out, but good job!! 👍😁

@GarageBoys 5 жыл бұрын

Awesome! I’m glad I was able to help 😊 if you can help me back by subscribing and liking

@chicothecat822 Жыл бұрын

Thanks, fixed my issue today. I did however take all the housing away from the radio & heater also & was able to fully diagnose why it wouldn't push. It's not being held in into the ring its supposed to anymore because the ring is plastic & has snapped. I tied a wire around the whole piece tying the line in & was able to get it fully functioning again.

@robrobasmr5757 5 жыл бұрын

Thank you this was the problem with my B2200 Mazda truck. AC WORKS NOW!!!

@GarageBoys 5 жыл бұрын

Glad to help a brother out

@HappySlayer81 4 жыл бұрын

Thank you so much man. I have been looking for this forever.

@GarageBoys 4 жыл бұрын

Glad I could help! Please like and subscribe 😊

@hakimbinbrahim8397 4 жыл бұрын

Thanks alot .worked very well for me.i have peugeot partner tepee and that tiny panel by the accelerater was padded with insulation.i found out traces of that small mechanism on it .i assume the insulation went out of shape due to hot climate so i removed it.plus few sprays of wd40 and it all went fine.

@GarageBoys 4 жыл бұрын

I’m glad you where able to get your a/c back. 😃

@suranil4u 3 жыл бұрын

Thanks bro, I was having same problem , I also remove the cable string , now I have cool air ,. Flipper stuck in-between , will repair after summer ,. Thanks again

@GarageBoys 3 жыл бұрын

Glad I could help! Enjoy the cold air 😃

@westonscampbell Жыл бұрын

Exactly what I needed! I manually flipped the white plastic piece to cold. The turn knob will pull it back to hot, but can't put it back to cold.

@markgottlieb1963 2 жыл бұрын

Watched your video. Corrected the problem in under 5 minutes. Now I’m going to take apart the front panel and see why the cable is weak when pushing to cold position. If I fix it I’ll post the video

@erickarch6622 2 жыл бұрын

Did you fix ?

@MegaOttoG 2 жыл бұрын

I got the same problem in my Jeep, replaced that part 3x,,Thanks for this Video

@MichaelSmith-zl4sy 3 жыл бұрын

Excellent, had the same issues with my car popes the lower panel and was able to flip the vent flap by hand . Live in Florida and it’s been hot. Thank you for the info.

@mef12727 3 жыл бұрын

Year and make of your car?

@MichaelSmith-zl4sy 3 жыл бұрын

@@mef12727 2006 Nissan Sentra 1.8s

@GarageBoys 2 жыл бұрын

Glad I could help! If you can, help me back by liking and subscribing 😃

@michaelhratko2453 2 жыл бұрын

You saved me $200 dollars for something that took 2 minutes. Please keep videos coming.

@freddiesandoval9843 11 ай бұрын

Actually I'm the collector 😅😂jkn

@anilgoyal2472 5 жыл бұрын

Gr8...after watching this video ....I fixed my car A/c . Thanks and please upload more videos

@GarageBoys 5 жыл бұрын

Awesome! Glad I was able to help, if you can help me back by subscribing and liking :-)

@anilgoyal2472 5 жыл бұрын

@@GarageBoys absolutely. ..

@raulpendas 6 жыл бұрын

You could a second wire and tie the part that open and close so you could have the sufficient force to push it to close.

@jameskendricks4508 5 жыл бұрын

Thanks for the video. My SE-R is doing the same thing. I will try this tomorrow. I don't know if this part can be disassembled, but if it can be, I will lubricate the inside with some lithium grease, and re-assemble.

@GarageBoys 5 жыл бұрын

Awesome! Let us know how it goes 😃

@jameskendricks4508 5 жыл бұрын

That did the trick. The blend door was in the heater position. I put in in the cool position and I now have A/C. My wife and dog thank you. THANK YOU VERY MUCH!!! More Sentra videos please. My SE-R thanks you.

@GarageBoys 5 жыл бұрын

I’m glad I was able to help 😃 if you can, help me back by liking and subscribing.

@xadam2dudex 5 жыл бұрын

The valve is stuck into the open position and might need replacing or it might just may have a lose vacuum line if it is vacuum controlled

@alejandrodiazrossete5729 5 жыл бұрын

Very helpful, thank you!!!!!!!!!!

@freddiesandoval9843 11 ай бұрын

Thank you brother.. simple and right to the point and good video

@ethanwilson1001 3 жыл бұрын

Interesting troubleshooting on the control mechanics, though for plastic lubrication, WD-40 isn't the best choice, as it can eventually soften and change the characteristics of some plastics. Lithium grease is a safer and more robust alternative, as it's not damaging to plastics and that it's a grease will also hold up longer to use and not drain or evaporate like WD-40 tends to do after a few weeks.

@duaneeldridge5762 3 жыл бұрын

WD40 is not a lubricant its a solvent. WD stands for water displacement

@ryans413 2 жыл бұрын

People confuse this WD-40 is a cleaner like Brake Clean not a lubricant so it’ll wash all the grease and dirt away but won’t lubricate it.

@Alteredmemory 2 жыл бұрын

Also won't hurt electronic

@HIGHER7RUTH Жыл бұрын

Mennn, bought the ac can and my ac was full got a feeling this is the issue. Since i Clearly remember i put it in hot and it never got cold again. And a dumb mechanic was messing with that area of my car a month ago. Too bad hes 3 hours away luckily i found your video its summer and i just need cold rn🥵

@ryanreynolds7771 3 жыл бұрын

I would put a spring to pull the lever back as you pull it back when you go back to cold and when you pull the lever the spring will pull it back to cold . Hope this helps you

@Renvega77 4 жыл бұрын

What is it called that your working on?? The part? Are you talking about the blend door actuator

@TonyHookedonVanlife 3 жыл бұрын

Gonna check mine tomorrow morning. I am moving to Arizona in 2 weeks... I NEED AC!.The other day it got to 118 degrees there!

@jjenson2006 6 жыл бұрын

Either the cable is bad or the part where it connects to the rotary switch is bad. However, if you're not going to replace the needed parts, what I would do is take a thick rubber band or a small spring and attach it to that white plastic finger and attach a screw to the case to hold the other side of the spring or rubber band. That will put some mechanical force on the blend door in the cold position so it will close with very little effort from the cable.

@codylong2211 4 жыл бұрын

That's a pretty good idea

@back40bandit98 2 жыл бұрын

-- Wonderful. I will be checking this on my 2007 Honda Civic in the morning. It's blowing hot air.

@John-zp2jm 2 жыл бұрын

Did it work?

@back40bandit98 2 жыл бұрын

@@John-zp2jm -- I have not done this yet. But planning to do it very soon. I'll let you know what I find.

@sunshine3914 Жыл бұрын

Let us know where it is in the Honda, plz. In my Ranger, I just had to remove the glove box.

@nyclife3525 6 жыл бұрын

Works like a charm

@adaohd2538 5 жыл бұрын

I have a 328i with that same issue.... now , thanks to you, I can try to figure out what to do. God bless

@robwells5753 5 жыл бұрын

sell your car man nothing but trouble from every direction

@FrankBandz 3 жыл бұрын

@@robwells5753 😭😭😭😭

@danielgreen4389 6 жыл бұрын

That is a great help many thanks

@TuyenPham-jm5eq 4 жыл бұрын

An extension spring may be missing. This spring pulls the white plastic lever back from hot to cold position.

@PrFrmBklyn 4 жыл бұрын

You need to do what you did in the opposite location. take the housing off and adjust the clip that holds the wire at the hot/cold nob you're turning. It gets lose over time. Very common in Honda's and toyotas.

@johnmershon3889 3 жыл бұрын

Chev Silverado ac does not cool

@flowerchild777 2 жыл бұрын

Thanks

@danieltur23 4 жыл бұрын

Hey bro, first of all thank you! My car (mitsubishi lancer 2010) have no such a heat lever. Its probably move by electronic, cus it have no mechanical wire going out from the ac control and when im move the heat/cold circle its making a sound of movement only when the power switch is on. Any suggestions where i can find the inner lever?

@getpoked2498 2 жыл бұрын

My car also does pure hot air so I'm going to have to check this solution out, thanks

@GarageBoys 2 жыл бұрын

Let us know how it went

@wanyathomas2068 4 жыл бұрын

Ima try this tomorrow on my mustang you might be a goat

@GarageBoys 4 жыл бұрын

Let us know how it goes!?

@randy5141 4 жыл бұрын

Very helpful. Fixed the problem.

@GarageBoys 4 жыл бұрын

Glad to hear that

@leroycovarrubias4905 2 жыл бұрын

Hey bro thank you so very very much this fixed my problem you just saved me hundred of dollars

@josetineo9898 4 жыл бұрын

Thank you my friend you got me ideas how I fix my problems and my frustration thank you

@GarageBoys 4 жыл бұрын

Glad I could help, if you can help me back by liking and subscribing 😃

@josetineo9898 4 жыл бұрын

Garage Boys of course my friend

@daveyaeger6070 2 жыл бұрын

It looks like there is a spring attached at the bottom of the white plastic piece that is meant to push the lever when you select cold air. I wonder if the spring is still connected to its anchor point (it’s too dark to see in the video), or if the spring has weakened over time and needs to be replaced…

@servantofthelamb9037 3 жыл бұрын

Theres a little slash on the white plastic its missing a little spring that keeps it on cold an when you turn to heater the wire pulls it to heat an when you move it to cold the spring pulls it back to cold. I hope that solves your problem God Bless

@johnbobbitt6470 3 жыл бұрын

that’s how all their cars end up with flat tires🙄

@flowerchild777 2 жыл бұрын

Thanks very much, SOTL👍

@nutritionfartsdotorg4669 6 жыл бұрын

very helpful man.. thanks

@GarageBoys 6 жыл бұрын

I’m glad it help, if you can help us back by subscribing

@youtoobloser 2 жыл бұрын

awesome! ive got this same issue with my silverado. gonna try this.

@GarageBoys 2 жыл бұрын

Let us know how it goes!

@gamer_minecraft996 2 жыл бұрын

Thank you very much Garage Boys my car have same issue, and i solved it myself.

@GarageBoys 2 жыл бұрын

I’m glad I was able to help 😃

@danielreynolds178 Жыл бұрын

Great video bro!!!

@papicholo30 2 жыл бұрын

H-Town, here to? Having Compressor Hissing. Do you have a solution for vehicle ac hissing coming from compressor problems

@codylong2211 4 жыл бұрын

Thanks man😎😎😎😎!!! You saved me some💰💰💰!!! God bless!!!

@GarageBoys 4 жыл бұрын

Glad I was able to help! Help me back by liking and subscribing 😃

@jeffarp7409 3 жыл бұрын

I don't know for sure, but it kinda looks like it needs a return spring to help pull it back into position.

@deyencihutchison8554 2 жыл бұрын

How do you put it into place?

@pollydor07 6 жыл бұрын

Very helpful , thanks

@GarageBoys 6 жыл бұрын

We are glad we could help, please help us back by subscribing

@pxq_uzi1374 3 жыл бұрын

Garage Boys I want to leave it on cold what do i do?

@danoakley6538 2 жыл бұрын

Drill a hole through the bottom piece. Slide a dowel in and secure it to the a/c door, that's if you can get a good shot straight through to the to the switch.

@Djivgar1 4 жыл бұрын

The case is that the spring haven't suffisent force to return the lever, so I'll put another spring to help it - spring with lower force, one end on the lever and another end in somewhere behind it. I think this way to solve the problem, because to pull you have suffisent force to overload both springs but not to push the lever with the flexible cord.

@VapeMe 5 жыл бұрын

thanks so much man!!!! subscribed!!

@GarageBoys 5 жыл бұрын

Thx 4 subscribing!

@axjohn 4 жыл бұрын

After you sprayed it with WD-40 you cleaned off all of the remaining lubrication. Spray that moving part with some Teflon-type dry lubricant, NOT an oil-based lube.

@albinkohls888 2 жыл бұрын

Exactly

@uwebuehrle6381 5 жыл бұрын

put a pull spring on the lever that pulls the lever back , that fixes it.

@jazpanoz4996 4 жыл бұрын

Has one already!

@johndelong5574 Жыл бұрын

Excellent vid Thanx a heap!

@yawyaw9481 4 жыл бұрын

Damnnn y’all kept that Sentra clean!!!👀

@raysno8367 2 жыл бұрын

Yes fixed my 09 Xterra , the whole dash had to come out just to change the blend door actuator !

@johnbobbitt6470 3 жыл бұрын

thank you, sir. i’ve been without A/C For three months in the San Antonio, and I’m a Yankee. was fixin to DIE 🥵

@mef12727 3 жыл бұрын

What is the year and model of your car?

@jaybenjamin4563 3 жыл бұрын

Ohhh hey John! That mustve been a big change. Im from ny myself took a trip to arkansas recently, HOT!! 😆 My 07 sentra SL is having this issue now. I wanna try this solution...

@GarageBoys 2 жыл бұрын

Glad I was able to help! If you can, help me back by liking and subscribing 😃

@GarageBoys 2 жыл бұрын

It works on most of the cars out there. What do you have?

@Tman-xr7xw 9 күн бұрын

Thanks man. It's works now 😌

@bettyspencer5164 2 жыл бұрын

What type pf care are you working on and what is the name of the part.

@nasmore433 5 жыл бұрын

good work ... thanx

@captproton1015 29 күн бұрын

i wonder if this reason I hot air have coming out for Chevrolet Cavalier - its old, but i never took off any panels- but i guess i can check to see if there a mission nut or loose cable pulling nothing

@armandocastillo8287 Жыл бұрын

Thank you for the info

@GarageBoys Жыл бұрын

Glad I was able to help

@adamrodriquez389 5 жыл бұрын

Great video

@mikesalama51 Жыл бұрын

Excellent video I got the idea

@richardpatrick1066 2 жыл бұрын

Did u try a spring to pull it back?

@nicolegerkens3818 Ай бұрын

I just replaced that actuator blend door and fixed the heat but now ac is blowing hot, compressor is working. Do you think that actuator is already bad? or the actual door is broke, because i dont hear it clicking like it was

@bigcasual08 4 жыл бұрын

Super helpful thank u, i almost went crazy

@GarageBoys 4 жыл бұрын

Glad I could help, if you can, help me Back by liking and subscribing 😃

@asaadalrekabi4399 4 жыл бұрын

Thanks, but what about the otomatic AC baord? still it has the same wire? 2005 Sienna

@GarageBoys 4 жыл бұрын

Yes they still have the same mechanism

@lindahogg 2 жыл бұрын

I have a 2003 Nissan Maxima it's charged the clutch is working the fan works when I turn it on cold there's no air coming out on hot it blows hot air could you please tell me what I what I may check to get it working or what I need to replace if it needs to be replaced Thank you

@keyyvibez9363 4 жыл бұрын

You are amazing!!!! You just help me out so much. #2020

@GarageBoys 4 жыл бұрын

Glad I helped 😊 please like and subscribe

@frankmachado1010 Жыл бұрын

lines are not cold, constant turn pump in 07 jeep patriot. trying to figure this out w/o spending money on things that are not broken like pump.

@joseywilds3133 4 жыл бұрын

Another thing to check thanks,

@ubaldosolorio5734 4 жыл бұрын

For a dodge caliber 2008, a/c or hot air, not coming thru vents, any ideas to fix it? Thanks btw great video

@GarageBoys 4 жыл бұрын

Is the blower turning on? (Blower is located behind glove compartment, basically a fan). If it’s turning on then air has to be going somewhere, maybe to the defrost? And if that’s the case this is your problem, the actuator

@baizhamad8840 7 ай бұрын

My car is yaris 2006 i chnage thermostat and radiator still no warm and to change cold air to heat air is a degree like conditioner can u tell me how to fix it?

@kenanm13 3 жыл бұрын

So true. Some try to fix my ac stating it was low on gas then compressors was faulty. Actually my switch also was stuck on heat. Was having only hot air at a point. It was on a Kia Koup am still working on it.

@GarageBoys 3 жыл бұрын

Glad I could help 😃

@anthonypleban8591 6 жыл бұрын

I have a 2007 Subaru Forester and that is doing the samething that your talking about on what mine is doing

@lazy855 8 ай бұрын

I know it has been 5 years but I have a 2007 Subaru outback blows hot on dash vent drivers side and cold everywhere else. Were you able to fix yours with an actuator and where was it?

@amandahines4747 11 ай бұрын

Yessss this is exactly what is wrong. I can see that white piece stuck on heat but i cant get the screw off of the panel to get to it. 😢

@amandahines4747 11 ай бұрын

Ok, so I got the white piece in the correct position, but still hot air😢

@ryymoneytoofunnyy 4 жыл бұрын

I have a 2002 Buick lesabre. Do you think it’s the actuator??

@GarageBoys 4 жыл бұрын

If you have this symptoms then yes

@anthonybotonis4541 3 жыл бұрын

Your problem is the cable has come away from the holding clip. It secures the outer cable. You need to view the complete cable. As you turn the knob the pressure to overcome the flap door causes the outer cable to move. If you secure the outer cable it has nowhere to go therefor the inner cable will do what it is suppose to.... move the flap correctly👍

@flowerchild777 2 жыл бұрын

Thank you very much. Quite helpful👍

@RoanaAutomobiles 3 жыл бұрын

Thanks alot

@747oo7 Жыл бұрын

Very helpful

@ragadallas1982 2 жыл бұрын

same car ,same issue , now is time to check !!!! thanks !!!

@GarageBoys 2 жыл бұрын

Let us know how it goes!!!!

@ragadallas1982 2 жыл бұрын

yes it was . easy fix

@bettyspencer5164 2 жыл бұрын

What care are you working on and what is the name of the part.

@dora42ch 5 жыл бұрын

im having the same problem with my car right now. they do not have actuators for my car though because its too old. i guess my mechanic will figure something out. i have had this problem with my car for quite a few years now and its time to fix it because its hot here in Texas.

@GarageBoys 4 жыл бұрын

It sure is, try looking for your parts on amazon

@gyro5d 3 жыл бұрын

Don't you need some kind of clamp holding the end of the cable from moving. Maybe there's a clamp that is loose?

@ryans413 2 жыл бұрын

Problem is cable become stretched it’ll work with a pull action but not push. I’d just leave it when you need heat not hard to pull the panels out just flick it over by hand little annoying but it work.

@steevejean617 5 жыл бұрын

Mine works thanks

@robertphillips4265 2 жыл бұрын

I wonder if it's in the dial. It goes one way but wo t move the wire back the other way

@kennethknight9326 4 жыл бұрын

Could you do a video like this for the same issue with a 2013 hyundai elantra? This has been racking my brain for weeks

@buuzy252 3 жыл бұрын

Hey! I'm having the same issue with my Hyundai Elantra 2012!!

@mef12727 3 жыл бұрын

@@buuzy252 check the manual. It could be ac compressor

@buuzy252 3 жыл бұрын

@@mef12727 thank you I fixed it 3 months ago it was the ac compressor right. Had to replace it for 140box

@dabobb1474 6 жыл бұрын

Try a spring to add tension to pull to the cold side

@wildbill31 6 жыл бұрын

freealistar its funny but works i just jerk into the next lane to get it to work and my heat does the same im glad i seen this bc its funny when someones riding with me and i tell them its what i have to do to get the ac to work

@dabobb1474 6 жыл бұрын

Wild Bill ok cool well whatever works

@albertalanis4790 5 жыл бұрын

My car started doing that today just blowing hot air thanks a lot I’m going to try today in afternoon. The lines are cold and has Freon It should be what you said.

@GarageBoys 5 жыл бұрын

Yes it is 👍🏻

@albertalanis4790 5 жыл бұрын

Thanks a lot very easy to do now my air conditioner is working perfectly

@GarageBoys 5 жыл бұрын

Awesome! Glad to know I was able to help. If you can, help me back by liking and subscribing 😃

@philcastillo3719 2 жыл бұрын

It maybe missing a spring pulling the arm back to ac side. It looks like that wire isn't stiff enough to push the vent back by itself. Look below the arm to see if anything fell. I know, 4 years later.