Access Your 3D Printer Octoprint ANYWHERE... on ANY DEVICE!

Рет қаралды 47,732

Күн бұрын

Wanna access your 3D printer on your smart watch? On your TV? Via Telegram? Via a Desktop App on your computer? On vacation? Or even on a WIDGET on your phone's home screen?
YES, YOU CAN!
Many of you may have Octoprint set up on your 3D printer via a simple RaspBerry Pi... but unless you've done a good bit of research/hacking/tweaking, it probably ends there. So when you are 3D Printing something but want to leave the house, you have no access to the printer...
In this video, I'm going to show you how to make your OctoPrint enabled 3D Printer accessible ANYWHERE you go - even from across the world - using OctoEverywhere. It's an alternative to The Spaghetti Detective, but unlike The Spaghetti Dective, OctoEverywhere allows you to use custom apps, like OctoPod... and you'll see why that's important in just a second. Finally, you can keep an eye on your 3D Printing, no matter where you go!
🤫 Get behind the scenes and exclusive content on my Patreon: / thenextlayer
💬 JOIN MY DISCORD: jle.vi/tnl-discord
🎥 IN THIS VIDEO: 🎥
00:00 Introduction, what's possible, and making your 3D Printer "smarter"
01:53 What is OctoPrint (for those who don't know)?
02:59 The limitations of Octoprint
03:25 Connecting Octoprint to the public internet for remote 3D Printing
03:43 Obico / TSD / The Spaghetti Detective Review
04:18 Why I stopped using The Spaghetti Detective / Obico / TSD
05:18 Octoeverywhere vs. The Spaghetti Detective / Obico
05:53 Octoeverywhere walkthrough and feature highlight
06:08 How to share a 3D Printer live stream with your friends
06:52 Access the full Octoprint interface remotely
08:00 Connect your 3D Printer to Telegram (via Octoeverywhere)
08:39 My Octoprint desktop app solution(s)
10:28 My recommended Octoprint iPhone App
11:10 Why Octopod is the best iphone app for octoprint
11:39 How to add an octoprint widget to your iPhone homescreen!
12:24 View your 3D printer on your apple watch!
13:04 Connect your Octoprint 3D printer to your TV (Apple TV)
13:50 Connect your 3D Printer to your smart home and automations via HomeAssistant
15:50 Summary, and Thanks for watching
🔗 LINKS / RESOURCES MENTIONED: 🔗
👉 OctoPrint octoprint.org
👉 Octoeverywhere octoeverywhere.com/
👉 Flotato for Mac www.flotato.com
👉 The Spaghetti Detective / TSD (Now called Obico) obico.io
👉 OctoPod (Octoeverywhere for iOS) apps.apple.com/us/app/octopod...
👉 Home Assistant www.home-assistant.io
🛒 RECOMMENDED GEAR: 🛒
📍 Complete list of 3D Printing accessories: kit.co/jlevi/3d-printing
📍 Complete list of my videography gear: kit.co/jlevi/content-creation
📍 My favorite 3D printing filament: jle.vi/polymaker
📍 My favorite 3D printer right now: jle.vi/voronkits | jle.vi/bambu (supports 3D Print General, who’s channel was deleted)
📍 My favorite BUDGET 3D printer right now: jle.vi/sovol
📍 Check out the official TNL merch: shop.thenextlayer.com/
📍 PLEASE CONSIDER SUPPORTING THE CHANNEL BY SHOPPING USING MY LINKS! FULL LIST CAN BE FOUND AT: jle.vi/links
❤️ LOVED THIS VIDEO? ❤️
▶️ Subscribe to the channel
▶️ Watch my other videos: / @thenextlayer
🔔 Turn on Notifications
🎁 Support me on Patreon: / thenextlayer
🎁 Send a “Super Thanks” (Tip)
🛒 Use my affiliate links for your 3D printing or videography needs: kit.co/jlevi
💬 Join My Discord: jle.vi/tnl-discord
✍️ Write a comment below!
👍🏿 Like this video
#3dprinting #3dprinted #3dprinter

Пікірлер: 38

@thenextlayer Жыл бұрын

THANK YOU for watching and subscribing! Let me know if I missed any, especially for Windows/Linux/Android/Other Smart TV's!

@octoeverywhere Жыл бұрын

Thank you so much for including our service in this video! We strive to empower the entire maker community to print better with free remote access everywhere! We welcome everyone to our amazing community of makers!

@thenextlayer Жыл бұрын

Our pleasure! Your app kicks ass, as does your customer service. I'm a loyal paying user! LOVE IT :) Let me know if you have an affiliate program or something, I'd love to support you more :)

@Nortesport 10 ай бұрын

Great video. I have a PI zero 2 to use for this but what screen do I use ?

@kellyjean4981 Жыл бұрын

This all sounds so incredible! Although coming from someone who doesn’t speak ‘computer’ lol, I’m completely lost. I will figure this all out one day I’m sure. Thank you for the great suggestions

@JottyHB Жыл бұрын

You didn't mention the imho best way: setup an access to your local network via VPN an do everything you can do being @home. Most routers make it easy to do so. Keep on going, your videos are great. 🙂

@thenextlayer Жыл бұрын

Yeah, this is pretty advanced for most people, though, and I understand there are some security risks?

@JottyHB Жыл бұрын

@@thenextlayer Being online is a security risk. But I trust an open source protocol more than any company’s app. And setting up a VPN is in many routers firmware quite easy. As a German I use AVM‘s FritzBox routers, they guide you through the setup in around 15 minutes.

@Quinninator Жыл бұрын

Great video, I loved the content! It was really helpful and very well explained. I'm looking forward to more content in the future!

@thenextlayer Жыл бұрын

Awesome, thank you! Make sure you're subbed with notifications, I have some cool new projects coming soon. Also, do you have any requests for videos you'd be interested in?

@justinscharr2484 2 ай бұрын

This dude is so good looking. Very charismatic.

@rfdibiase Жыл бұрын

Just started watching your videos, (Gridfinity brought me here, heh.) pretty good content. Subscribed. However a huge Android fan here, please add some of that in the future, if you could? Thanks!

@thenextlayer Жыл бұрын

Hey Rob, thanks so much for the kind words, and the subscribe :) I don't own any Android devices... perhaps you can research for me and let me know which ones are good :)

@nfkf95 6 ай бұрын

I need help setting mine up ughh im new

@eraldylli Жыл бұрын

I wonder, is there any good reason for sticking with Octoprint now that there is support pretty much for all printers in Klipper? Less plugins in Klipper, sure, but you wont miss them after a while.

@thenextlayer Жыл бұрын

My printers don't run on Klipper, and when I've looked at converting them to Klipper, it's always seemed too intimidating, and like I'll have too much downtime that could be spent printing. If there were an easier way that was plug-and-play, I'd do it, but I don't like tinkering with my printers more than I have to... that said, I REALLY want Klipper for the faster printing speeds.

@eraldylli Жыл бұрын

@@thenextlayer It's very easy to get Klipper running. Not one-click-easy, but easy nonetheless. You'll kick yourself eventually for not doing it sooner.

@eraldylli Жыл бұрын

Also, there is guides and configs for like 95% of all printers.

@dennysawyer3980 Жыл бұрын

@@thenextlayer It's not all that difficult to get Klipper working on most printers - especially if you start out using one of the sample config files available on the Klipper web site, but it does take some time to dial in the configuration. That said, some manufacturers are starting to pay attention and provide printers that run Klipper. Creality's new "Sonic Pad" looks like a good option if you're willing to spend $159, but right now it only includes firmware for their newer printers. I'm still tempted to try it with my Ender-3 Pro. I've got my Ender-3 Pro running on Klipper right now, using a Raspberry Pi. It took a couple of days to dial it in, but I haven't started trying to push the print speeds just yet. I'm happy with it, especially since Input Shaping got rid of the ringing and Pressure Advance helped with corners and stringing. And tweaking settings is a simple matter of editing the printer.cfg file. If I decide to go back to Marlin, it's just a matter of popping the SD card with the firmware on it into the printer and restarting it. (I also kept the OctoPi SD card from my Raspberry Pi just in case.)

@3D_Printing 3 ай бұрын

No IP for octoprint any more, used if over a long time before but now no access

@3D_Printing 3 ай бұрын

Just plugged in a LAN cable and it seems to work on a different IP

@philsfirealarm Жыл бұрын

Love This Video Will be using these

@thenextlayer Жыл бұрын

NICE, thanks. I've since switched to Obico b/c they added a lot of features I didn't know about

@rollseboy Жыл бұрын

Loved the video how do you get multiple instances of octoprint?

@thenextlayer Жыл бұрын

You go into the conf files and rename their localities, for example i have Prusa.local and Creality.local (each running on their own pi)

@rollseboy Жыл бұрын

@@thenextlayer thankyou for that. Ill look how to get to the config files ect. Thankyou :)

@rollseboy Жыл бұрын

@@thenextlayer gonna be a pain here, but where are the cofig files. Cant find them on the SD card

@smeendermann Жыл бұрын

As you having two printers also take a look at OctoFarm! :) It's a pretty handy tool to manage multiple printers. Awesome channel you're building up, can't wait for a Discord or sth. similar for the growing communitY! :)

@photelegy Жыл бұрын

Tried to access it from my TI-30 calculator, but it sadly didn't work. Some help?

@thenextlayer Жыл бұрын

LOL

@CrazyMineCuber Жыл бұрын

Just set up a VPN server on your network and you will always have access to your home network. I use WireGuard and once setup, it works flawlessly.

@BenReese Жыл бұрын

I agree with JJTVism - a VPN is by far the best option. No, it's not super easy to setup, but neither is OctopPi. TailScale is as easy or maybe easier than setting up OctoPi. ZeroTier is probably just as easy, but I haven't tried it.

@thenextlayer Жыл бұрын

A bit over my head honestly!