How to Remove Surface RUST (Fast and Easy) With This TRICK

Рет қаралды 42,940

3 ай бұрын

In this video I show how easy it is to remove surface rust and old paint with hand tools. This is a very affordable way to strip rusty panels back to shiny metal. Below are the links to the tools that I used in this video. Some of these tools are from affiliate links that I make a small percentage off of qualified purchases at no additional cost to you. This is an easy way to help support the channel and get you some cool tools. Thanks for watching and don't forget to Subscribe, Like and Share with your friends!!!!!
#restoration #c10 #paintandbody #paintathome #acdesignsgarage
#howtopaint
My Website to buy Shirts www.acdesignsgarage.com
PO Box #782 Troutman NC 28166
Product links Below:
Paint Stripper Disc amzn.to/3v7Ukfs
40 Grit flapper wheel amzn.to/3v9EIYT
Dewalt grinder amzn.to/3RKswXF
Bench Mark Grind shield amzn.to/3GMwOHM
C clamp amzn.to/4akJUtb
Defiant Gloves amzn.to/47YYMvQ
IR Grinder amzn.to/3NMyUep
3m ROLOC Grinding disc amzn.to/48yKZMq
D.A Sander amzn.to/4ajcgmV
80 grit 3m da sand paper amzn.to/4che5Cq
3m Mask amzn.to/4a0zrmk

Пікірлер: 47

@BillySBC 3 ай бұрын

Get the largest bath towel you can find. Soak the towel soaking wet with distilled vinegar. Place the soaking wet vinegar towel on the fender. Go home for the night. Come back in the next morning and remove the towel. Rinse the fender with a solution of baking soda and water to neutralize the acid from the vinegar. This should remove nearly all the rust.

@ACDesignsGarage 3 ай бұрын

Thank you ill try that, we use to do that with paint stripper. We would put the stripper on the pannel and lay plastic wrap over and wait an hour then peel off the plastic wrap and the paint would come with it!!!!

@wirefeed3419 3 ай бұрын

I use 10% white Vinegar to remove rust from parts by soaking them in a filled container for 2-3 days, works excellent. Never have tried using a towel soaked in it and covered with plastic, good tip.

@builtonabudget6767 3 ай бұрын

I'm in N.C. and love this weather. Love your content

@ACDesignsGarage 3 ай бұрын

Thank you very much!!!!!

@thomasrape4616 3 ай бұрын

Wipe that fender down with OSPHO , a rust neutralizer. It chemically converts iron oxide to iron phosphate. We used it offshore, sadly water conditions. I've used it on 4 tractor repaint over 25 years and no bubble rust came back under the paint. I use it after sand blasting or sanding to kill any rust that's left. Just spray it on or Wipe it on, let it sit over night, do a light sand, and prime it. Paint sticks to this really well. Nothing worse than doing a nice paint job and a year later you see rust bubbling up.

@ACDesignsGarage 3 ай бұрын

Thanks ill try to find some!!!!

@at_3831 3 ай бұрын

Coraseal I find works better then Ospho but both are oxidation converters that change the property of rust into a non oxidation compound, coraseal has a sealing property that works better then ospho. I used both products extensively since 2001 when I started as a deckhand on NY harbor tugboats, I’ve been a captain for 12 years and always use both products keeping up on rust prevention.

@rtkracht 3 ай бұрын

Nice. I discovered those stripper discs last year. They work great on rust and equally well on skin. 😢 Definitely need to wear gloves while using. Glad to see you going over the little details. Thanks man!

@ACDesignsGarage 3 ай бұрын

Thank brother, i agree that they'll make a knuckle disappear lol

@UnconventionalMetal 3 ай бұрын

75 degrees, a lift, and all those beautiful parts 👌

@ACDesignsGarage 3 ай бұрын

Hahaha thank you!!! I Love this spring time!!!!

@JosesGaraje 3 ай бұрын

Just started my new channel on KZfaq customizing a Toyota FJ40 into a FJ45 pickup. I appreciate your expertise and the products you use to get the rust and old paint off as I have a lot of body panels to do, especially like the stripper disks, will definitely be buying a slug of those.

@ACDesignsGarage 3 ай бұрын

Thank you, they work great,Good luck on the channel , let me know what your channel is and ill check it out, I love some fj40s!!!!

@JosesGaraje 3 ай бұрын

@@ACDesignsGarageJose's Garaje

@scottjune3554 3 ай бұрын

Dang it man, you're living my dream. That lift is a game changer

@ACDesignsGarage 3 ай бұрын

They do make life easier for sure, it only took 25 years to get a used one lol

@JamesSmith-hx3lp 3 ай бұрын

Enjoyed the video, looking forward to seeing more.

@ACDesignsGarage 3 ай бұрын

Thanks for watching!!!!

@SpankysHotRodsandCustoms 3 ай бұрын

Great video, I can taste that rust dust just watching this.

@ACDesignsGarage 3 ай бұрын

Hahaha thanks Spanky!!!

@Harrybowles1969 2 ай бұрын

vinegar or phosphoric acid is good rust killer as a safe bet before paint, not too hard to do. Awsome to watch thanks

@ACDesignsGarage 2 ай бұрын

Thanks for the info!!!

@SmittyInVegas 3 ай бұрын

I take a old towel. Soak it with white vinegar. Lay it on top of the fender or whatever. Sometimes throw a piece of plastic wrap over it and let it sit overnight. You will be amazed.Smitty

@ACDesignsGarage 3 ай бұрын

I may try that over what ive done, thanks for the tip!!!

@garymucher4082 2 ай бұрын

Those disks are amazing how well they work on most everything. I will say, you absolutely need gloves on because as you use those disks, little pieces wear off and will sting your hands pretty well if you don't wear gloves. And those disks do wear out quicker than other flapper types. But they do a better job too...

@ACDesignsGarage 2 ай бұрын

I agree and if that thing hits your hand it hurts bad lol, dont ask how I know!!

@nealdownn3365 3 ай бұрын

tiger hair and a paint brush there is hope don’t give up now you are almost done

@lonniehall9006 3 ай бұрын

Work outside, I love it. Kentucky

@williamgray8054 3 ай бұрын

On fenders like that I like using muratic acid wear gloves glasses face mask spray it on with a spay bottle scrub with a brush be care not to get it on you then rinse with water and then mix some baking soda water and rinse with that to kill the acid rinse again with water will take all rust off do this outside only

@ACDesignsGarage 3 ай бұрын

Awesome thank you, ill have to try that!!!!

@user-pq6gt5mr1p Ай бұрын

Soak some towels in vinegar. Lay the out on the panels. Let them sit. Keep them soaked with vinegar for about 24 hrs. Remove towels. Hand scrub with wire wheel or red scotch brite. You’re welcome.

@ACDesignsGarage Ай бұрын

I've used that method, it works great!!

@tallyman15 3 ай бұрын

Where do you buy patch panels? I need one for a Sprinter van.

@ACDesignsGarage 3 ай бұрын

The ones I buy are from classic truck stores, next week im gonna show how to make a patch from scratch and weld it in if you want to check it out. It will be the same process for your sprinter van!!!!

@tallyman15 3 ай бұрын

@@ACDesignsGarage Great! Looking forward to that video.