SUBSCRIBE NOW! for more content and support the channel. It costs nothing 🙂✌️

Hey man! Really nice job on the video. I was able to repaste my Predator Helios 300 2019 version (1660ti, 15.6in one) by using your video as a reference! Used exactly the same paste and pads as you. Once again, thanks for such a nice DIY video!

thank you for the tutorial man, i cleaned and repasted my predator 300 using your method, saved me a lot of money buying all the things rather then giving it for servicing, keep it up

This was extremely useful to me. Thank you in particular for specifying the thickness of the thermal pads at 7:30

Didn't know you could open the fan unit like that. Gotta clean out my fans tomorrow. It was starting to make noise in higher rpms. 👍👍👍👍

This is great. I've been wanting to repaste my laptop (same model) for a while now, and this is a great reference for that!

in spite of your amazing video of showing us how to clean each single unit... the songs in the background is FANTASTIC !!!

The only vid I could find where the fans got cleaned. Thanks brother! You got my 👍

Your channel deserve a hit

You did it carefully and perfectly with lot of patience bro unlike some goons out there, I was wondering for perfect use of thermal pads as what thikness should be used where and all but you solved that confusion too bro Thanks and take care bro, I am about to paste my GPU and CPU this weekend, wish me luck bro.

Was watching this at the gym for a reference on what I'll need to do. Forgot I was watching and just zoned out to the music haha nice tunes

Perfect tutorial. Now I am good for another 3 years

so satisfying to watch!.. a couple of days ago my gpu fan almost failed and I opened it up for cleaning (obv not as thoroughly as you, I'm kinda scared to open it up completely on my own), however it barely moves even when i try to rotate it manually.. I'd hope it didn't need replacing, as it's practically impossible for me to get new parts in the country where I live :'(

Great tutorial, thanks for taking us through it step by step. Did you by any chance see whether there's any difference to the CPU and GPU temps when you undervolt your machine or reduce your maximum processor power to less than 50pc?

Thanks for video. I took your video as reference for my 1660ti model and it solved my laptop's overheating

Hi bro great job 👍 In your description you mentioned the thermal pad which consists of 20X67X0.5mm X3, 20X67X1.0mm X3, 20X67X1.5mm X3, Are these many pads required or less than this is enough. If you could remember please tell me how much thermal pad required in both area and thickness of it?

Was just playing Scavengers on my 15 inches Helios 300 2019 and the CPU temperatures were like 90-92. As our CPU is already undervolted would I think repasting is the last option! Thanks for the video mate

I cleaned mine 10 days back and everything was fine till today. Since noon today the right fan has been making loud noise as if it's hitting on something while rotating

thanks for the thickness of the thermal pads thats all i needed to know

Verh helpful video. It was first time i ever opened my laptop, but its step by step guide definitely made it simple!

Thanks a lot! My fans were completly clogged and the factory paste and pads were quite dried up! Could manage to reduce my temperature while gaming starfield from 92°C with turbo to 82°C with normal fan speed! Holy Cow :)

Stopping by to show some love

This video reassured me about what to expect !! Thanks to you !! Very good video !!

Great Video man. After seeing so many videos finally !!

Great tutorial. I did it without any difficulty. Thank you.

oh bhai op 🔥🔥🎉

ULTIMATE MAINTENANCE ! KEEP UP THE GUD WORK ! 👌 👍

Thanks bro .....Your video really helped ...... I was scared ....but still did it

Hey I appreciate the video! I have a few questions, thanks in advance! 1. What are the risks of doing the disassembly (short circuit/etc.) and how would you mitigate those risks? 2. I have a predator that hasn't been repasted for 2 years, do I must replace the thermal pads? Would it make that big of a difference if I don't replace it? 3. For the thermal pads (Amazon costs too much in terms of shipping) can you tell me whether this unbranded thermal pads is okay to use or not? Specifications: Blue Size Length x Width: 20 x 20 mm Thickness : 1.0 mm (Don't worry it has the 0.5 mm version as well) Thermal Conductivity : 3 Wm/k 4. I've heard that static electricity damage can happen. Is that a thing I should be worried about or is it ok? Do I need some special equipment? Thanks for the video once again! Liked and subscribed

Very Nice an Clean work Dude!!

Excellent video! Got mine in 2019 also, think it’s due lol… just been scared to mess it up, going to order parts and try soon !

Ive just ordered thermal paste and the pads, will be coming back to this video in 7 days time. So nervous trying this for the first time.

actually a really really nice video

Hello, excellent video! I am about to do maintenance on my notebook, the model is the predator PH315-53-77M4. The only difference is that the video card is rtx 2070. The only question is regarding the thermal pads that you used on the chips and the vram, in case my notebook does not have them and only has thermal paste, it is convenient to put a thermal pad on it. pads where it doesn't have?. I would appreciate your recommendations. Greetings from Argentina.

Great Video ❤

Great Video.. Learned something new today..

It worked great for me! thanks for the video :)

I would like to see the tests in games at the maximum settings, what kind of heating will the processor be?

What thickness did you use for the pads? and one piece of 20x120 mm is enough to change all ? I cant find 2 pieces, only one

Thank you, great video mate

hello, thanks to you cleaning my laptop for the first time in two years was successful. i have a question though, do i need to replace the tapes on the fan because it no longer sticks and i had it removed. if yes, can you suggest what tape should i buy?

Thank's a lot i did exactly what u did following ur video and my temps went from peaks of 94 degress playing even CS2 to 65 degress 70 degress at peak! Of course in conjunction with throttlestop and undervolt. Used artic mx-4 paste and thermal pads of 0.5mm for vram and 1mm for the rest. Regards. Ps. Let's see now how long it will be efficient since once i repaste with collermaster paste and it only worked a few days but in that occasion i did not changed the thermal pads.

Awesome job. TY for sharing.

bro my gpu fan stooped last day its shows 0 rpm in predator sense plz tell me solution and also a question "is gpu and cpu fan are of same size plz let me know i m worried"

Does the dram actually benefit from the thermal pads? I understand the cpu and gpu probably get better temps but what about the system itself? Are the .5 mm pads you used superior to that pink paste?

when is ideal to be cleaning a laptop as a routine? I have my ph300 for a year now, and I'm wondering if I should try cleaning it even if I'm kinda scared and when should I try changing it's thermal paste? and about that brush to clean it, which type of brush is ideal so I don't damage my laptop?

A lot of work 👍💯

Great but my unit doesn't have thermal pads on it... should i have to put new ones or its okay to leave it like that....

You are a big help for me.

Really helpful video! Anyways are the VRMS the ones with pink paste? I dont know much about the internals of laptops.

Hmm. Just finished up repasting. Thanks a lot. GPU seems to have dropped 10degree during gaming. But CPU is more or less the same close to 90c. perhaps now it's overclocking more.

You have my sub my guy

Should I use these same thermal pads for "2021" version? coz in this version, GPU chips placement aren't same as 2019 .

Great video thanks for the info ..

I have this laptop :). Very nice laptop

Can I use thermal paste on vram memory instead of 0.5mm thermal pads?

I wish you had explained what you were doing at 26:43. Your hands covered it up, but did you have to solder something, did you screw in something? How do you reconnect the wifi?

The thermal pads should only be replaced if they're dry and flaky like yours, right? Should I buy the pads in advance just to be sure, or it's okay to just do the repasting and change the pads later if I see they're in a bad situation? And would you recommend using those anti static gloves or some sort of anti static pad? Or something else to avoid static, if it's necessary. (I'm a little scared of damaging something) Also, this might be a little dumb on my part but bear with me, I saw you recommend in another comment something about applying the pads first, but not the paste yet, fix the heatsink back and after a while remove and check for contacts. I have two questions about this: should I screw the heatsink back on during this, or just place it? And what does a contact looks like, which pads it could be on, and what exactly to do in this case? (For what I could get, the 0.5mm pads go on the ones that had the pink stuff, and the 1.0mm go on the rest, right?) Thank you soooo much in advance, this video is pretty much a life saver for me right now, cause just the other day I was doing nothing and the CPU was in 81ºC and it really freaked me out, buy this is the first time I do something like this myself, the most I've done before was adding an extra SSD.

Nice bro ❤

What kind of pads did you use? Thickness and what not? Thanks I’ll be using this video as my guide when I repaste and change pads on my predator triton 300 Also, should I use thermal paste AND pads on all the other parts besides cpu/gpu? Or just the pads?

Thanks for this great video, I have just one question. The thickness of the thermal pads are official? 1mm on everything and 0.5 on the VRAM

Hey, thanks for the video! I'm not experienced whatsoever in this field, but I've noticed a lot of fluff in the fans, so I came to explore. I've never overheated the laptop, so I don't think there is a need to (and neither do I want to (I'm scared to)) perform a full surgery, but I do want to clean the fans. Genuine question - are there any major risks if I just open the cover, get my hoover, and gently hover it over the fans, just to get as much fluff out as possible? Obvioulsy I won't put the hoover right up into the fans, as I don't want to damage anything, but will some gentle paintbrush strokes and a hoover to remove the dust do an acceptable job? Pls do say straight away if this is a bad idea🙃 Any advice/suggestions is greatly appreciated, from you and others :) Thank u

Hi, I have a Predator Helios 300 PH 317-53, I wanted to add a SATA 3 SSD to it, but when I disassembled it, I did not find a connection loop there, and a vibration-isolating elastic band. Tell me, what model of SSD connection loop should I buy?

What percentage of isopropyl alcohol did you use? The only one I have laying around is 70%

Mandrax your amazing 👏 your very skilled I learned something new. Great detailed video..Thank you brother 👍 AAA+++++

This is amazing! 🔥 I have few questions, I definitely am gonna ask you later.

I have a very similar model, same cpu, I found the Acer Aeroblade is so noisy. I found a replacement on ebay non Aeroblade but compatible size. I pushed out the fan from the fan case centrer pole add white lithium grease, the sound is so much quieter.

Hi my friend, I'm back to your channel again to watch lovely upload. Keep such great content coming. Waiting for next one my friend. Have a great Tuesday and stay connected - SG Indie Gamer.

Hello how can you activate upper data in warzone that you can see how hot it gets. thanks

Great !! THX

I stripped a screw really bad so I only replaced a fan. Still played this for the music

Sending my love and support 👍

new subscriber here idol ❤ very nice review ever 😊

Hey man, are these thermal pads good enough or should I get the thermal grizzly minus 8 ones or the gelid ones? Those seem to be lot more expensive tho

If anyone in the future is struggling, I used a debit card to put the Wi-Fi connectors back in. I was thinking I broke it as well. Idk the logic behind this, but try something flat to push it down?

super man, do you think if i send it to do that in a shop, would do a detail work so professional like your work?

Is it necessary to apply thermal paste, if we just want to clean the fan's dust. If we don't disturb the existing thermal paste, clean the fan and re attach it without changing the paste, will it still work or cause any issues??

hello my new friend thanks for sharing and take care of yourself and God bless you

gg man. what type of thermal pads you use exactly and how many mm? 1mm? and what thermal paste you suggest me with a same laptop but with a i5 11th gen and a rtx 3060?

Great breakdown. Do you play Warzone on this device?!

Should one do it by oneself or would recommend go for someone who is a professional

Hello, great vid! I just didn't understand how to plug these two cables of wifi at 26:43. Mine aren't plugging in, I don't know if I should pressure it more or something. Any tips? Thank you!

Hi , please help … I have acer nitro 5 , I applied 1mm thermal pads to the Vram the performance is now weak and the temps is higher too … what should I do ?

Hello good video i alredy make all of the tutorial .. really good!, i can see something black in the top of the SSD 1 in the pci slot ... Whats that?? Another thermal pad 🤔

Can u tell me where did u use what size thermal pads either u didn't mention it or I missed u mentioning it 😅😊

when you did the storage upgrade, did you move that to be the primary storage device or just add a second drive? Mine has a 512gb and I am going to add a 1tb but I am trying to figure out if i need to move my os and everything onto it it by cloning then clearing the 512 or just add it as additional storage.

Hi there. My wifi stopped working after this. I know I plugged the wifi adapter correct. What seems to be the problem?

can you apply thermal pastes on those parts instead of thermal pads?

Nice my friend

Bro.. is thermal pad mandatory? Or just thermal paste enough? Iam using helios 300 2019(1660ti) not changed thermal paste since i bought.

I'm going to be doing this soon, but instead of the pads, i bought a special thicker thermal paste instead

I would never let mine get this bad. I open it up every 6 months to give it a good cleaning even if it doesnt need it.

Can u tell me where did u use what size thermal pads either u didn't mention it or I missed u mentioning it 😅

For the vram areas can we use thermal gel instead of pads? The areas which were initially pink

One of your cable routing is different from mine, I have to unplug that to remove the heat sink, which nearly gave me a heart attack.

how are your thermals now? i have the same model and am planning on repasting, rit now im hitting 92c all the time while gaming

Would be cool if you had specified what kind of screw heads you were using

BRILLIANT !!!

Hi, Great video! 👍👍👍 I have favorite your video to reproduce it once I have bought what I'm going to ask you. I have the ACER Predator Helios 300 PH317-54-796D. I will want to change my ram, increase my storage. What models would you advise me in ram 16G, ssd PCI 1T and Sata 2T? Thanks

Which ones are the VRM chips? The smaller ones? I can't tell the difference which you put 1mm thermal pads or 0.5mm thermal pads. I'll be doing the same thing you're doing.