HVAC Sheet Metal Basics! 3 Methods For Hanging Duct!

Рет қаралды 169,709

Күн бұрын

In this HVAC Training Video, I show 3 Ways to Connect and Hang Ductwork. This is a Sheet Metal Basics Video for New Techs, Apprentices, and Helpers. Supervision is needed by a licensed HVACR Tech while performing tasks as Experience and Apprenticeship garners Wisdom and Safety.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Our Related Videos
• Quickly Make a Sheet M...
• Building a Sheet Metal...
• How to Make a FILTER R...
• HVAC Emergency Condens...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Our HVACR Educational Books, E-Books, Workbooks, Cards, Posters, and PowerPoints:
All Our Educational Products on Our Site: www.acservicetech.com/store
All Our Educational Products on Amazon: amzn.to/48pDd82
Mini Split Book and E-Book on Our Site- www.acservicetech.com/mini-sp...
Mini Split Paperback on Amazon- amzn.to/3ytHJSs
Mini Split Paperback on TruTech Tools- www.trutechtools.com/BooksGui...
Refrigerant Charging Book and E-Book: www.acservicetech.com/ac-book
Refrigerant Charging Paperback on Amazon: amzn.to/46xTeHf
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Our HVACR Online Resources!
Our HVAC Calculators: www.acservicetech.com/hvac-ca...
Our Newest Articles: www.acservicetech.com/articles
Try our HVAC/R Quizzes! www.acservicetech.com/quizzes
Our Other Resources: www.acservicetech.com/resources
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Tools Used in Our Videos!
Tool Links on Our Site: www.acservicetech.com/tools
Our Tool List on Amazon: www.amazon.com/shop/acservice...
Support the Channel by purchasing tools through TruTech Tools!
Use this link www.trutechtools.com/?aff=8
Save 8% at checkout using code "acservicetech"
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Follow Us On Our Social Media & Podcasting Channels!
Patreon: / acservicetech
Facebook: / acservicetech
Instagram: / acservicetech
X: / acservicetech
LinkedIn: / ac-service-tech-llc
Tiktok: / acservicetech
Spotify: open.spotify.com/show/74KXLz5...
Apple Podcasts: podcasts.apple.com/us/podcast...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
⚠️ Disclaimer:
Information in this video is intended for educational purposes only. Any work related to the topics in this video should be performed by licensed technicians or by apprentices under the supervision of licensed technicians. AC Service Tech LLC is not responsible for any possible damages or injuries caused by the use or misuse of any information provided.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
#hvacr #hvacr #hvactrainingvideos #hvactraining #hvactraining101 #acservice #acservicetech #sheetmetal #duct #ductwork #hanging #basics #hvactechs #apprentice #trainee

Пікірлер: 165

@acservicetechchannel 2 жыл бұрын

For methods 1 and 2, because the duct is an inch away from the back wall, mastic is applied to the back side from the top and bottom using fingers and for the hard to reach middle section with mastic on the end of a piece of drive. This becomes much harder when hanging duct that already has insulation on it. You need more room such as hanging the duct 3 to 4 inches away from the back wall. Near the drive ears, we usually fold the insulation inwards so it is tucked under itself until we make the connection, seal the duct and then the insulation can be pulled out and taped. Related Videos: -Quickly Make a Sheet Metal Plenum at the Job Site! Measure, Cut, Bend, Seal, Mount! kzfaq.info/get/bejne/jbJgZZaEqrjUdJs.html -Building a Sheet Metal PLENUM and END CAP with Hand Tools! kzfaq.info/get/bejne/nrOfgb2pmZ-Ygac.html -How to Make a FILTER RACK in a Plenum or Duct so that the Filter Slides In Smoothly kzfaq.info/get/bejne/it6Wmq10zLG-hKc.html -HVAC Emergency Condensate Pan!- Bend and Make a Pan that does Not need to be Brazed or Leak Tested! kzfaq.info/get/bejne/rM-pa7CK27_KnIU.html

@MrChipBryant 2 жыл бұрын

You are making a difference in the trade. Thank you for all you do for the industry!

@acservicetechchannel 2 жыл бұрын

Thank you so much Chip!

@redneckgoatfarmer 6 ай бұрын

I’m a DIYer but also an old carpenter. Did duct work with my pops many many years ago. This video was very helpful and brought back a bunch of memories. I remember we would spread the S-connectors just a bit and usually had to hammer them on. Probably bigger ductwork. Thank you for the video it’s very helpful

@qeesher 2 жыл бұрын

Hey Craig, I am glad that you started showing ductwork. Could you also make a series about air distribution? I see a lot of installers in Canada doesnt know it and install furnaces, ac's not matching duct sizes. Consequently plenums bang, furnaces overheat, motors fail, HXs crack. Thank you for your work ✊🙏👍

@acservicetechchannel 2 жыл бұрын

Thank you for letting me know what you would like to see!

@Danny-fs1hk 2 жыл бұрын

This guy is such an excellent teacher and the production level of these videos are great!

@nevinkuser9892 10 ай бұрын

Agreed. It's high quality learning!

@a-verybasic2 2 жыл бұрын

Thanks for the video. There are many ways to hang, connect, insulate, and seal duct systems. Along with proper sizing and design you will avoid most problems.

@acservicetechchannel 2 жыл бұрын

Absolutely, thanks!

@sheetmetalwork Жыл бұрын

Well done and explained!

@tphvac87 2 жыл бұрын

Dewalt of Milwaukee 🤔 team RED ALL THE WAY!! To each his own, great video Craig!!

@acservicetechchannel 2 жыл бұрын

Ha ha, love them both!

@davidstansbury3204 10 ай бұрын

Man thank you for this video. Thank you for your time and knowledge

@dexenationgracey1979 Жыл бұрын

Trade school didn't teach much about ductwork installation so this video is extremely helpful.

@rongee4433 Жыл бұрын

Union sheet metal trade school ......

@phillipdonohue5 Жыл бұрын

So you are a master sheet metal guy and a master tech. Super tech

@will-smith-nh Жыл бұрын

Excellent video. Thank you.

@SanteeVermont Жыл бұрын

Great video, thanks!

@Farm_fab 2 жыл бұрын

Craig, I spent nearly 10 years doing mechanical demolition, and only a couple times installing it. Some of the ductwork we had to remove from the inside as it was in a hallway and had conduits/pipes in the way. Usually it was a trunk that came out and sometimes just branches. I've seen good installs, and bad ones, and what you taught in this video is good information. I actually designed and made some tools for the trade, however, someone copied my idea, so I didn't make anything on it. It was a tool that was made to pry off the backer plate from school fin tube systems.

@acservicetechchannel 2 жыл бұрын

Tool ideas and patenting are certainly rough processes. Thanks for sharing Bryant!

@Sctronic209 2 жыл бұрын

Most excellent. Your students are lucky to have you as there instructor.

@acservicetechchannel 2 жыл бұрын

Glad you enjoyed the video!

@watermanone7567 2 жыл бұрын

Very nice job, and video.

@acservicetechchannel 2 жыл бұрын

Thanks a lot!

@ludwig93l Жыл бұрын

You are the best 👍

@MasonDixonAcres Жыл бұрын

Great video! We are about to start sheet metal in our new build. Our trunks will be wrapped in two-layer reflective insulation - what are your thoughts on strapping it up with fabric strapping rather than puncturing the insulation with screws?

@chesstime356 2 жыл бұрын

Great job

@acservicetechchannel 2 жыл бұрын

Thanks Mohammad!

@Houssem0880 2 жыл бұрын

Good video thanks 🙏

@acservicetechchannel 2 жыл бұрын

Thank you very much!

@lancelawrence3259 2 жыл бұрын

Nice work

@acservicetechchannel 2 жыл бұрын

Lance thanks!

@satindersingh6430 2 ай бұрын

Very good

@jleron22 5 ай бұрын

Great informative video sir

@martinp1544 2 жыл бұрын

Thumbs Way Up!

@acservicetechchannel 2 жыл бұрын

Thanks a lot Martin!

@charlesdlamini8126 2 жыл бұрын

Thank you very much

@acservicetechchannel 2 жыл бұрын

Glad to help Charles!

@feliperodriguez3184 Жыл бұрын

Excelent!!!!

@vicentegarcia7076 Жыл бұрын

Good Intel ty

@kodieivie 2 жыл бұрын

Glad your doing some duct videos! Thanks! Can you make a video for adding and attaching a rectangular return air In the bottom of those ducts?

@acservicetechchannel 2 жыл бұрын

Kodie, thanks for letting me know what you would like to see!

@robertwilliams6288 2 жыл бұрын

I always learn a lot from watching your videos thanks for all you do student of HVACR.

@acservicetechchannel 2 жыл бұрын

Thanks Robert!

@bobpaulino4714 2 жыл бұрын

You might investigate what we in the sheet metal workers (founded in 1888) have been using to make holes in hangers, duct, and sheet metal in general for over a century. William Whitney's (founded 1907) hole punch. Various size dies for every fastener size. Proper tools.

@acservicetechchannel 2 жыл бұрын

Bob, I have the Malco hole punch and I use that. I was just showing very basic methods for residential duct hanging with just basic tools, thanks!

@NoBody-ro3xj 2 жыл бұрын

Why use a.punch when a screw works just fine.

@behelpful1435 11 сағат бұрын

Around 1:30 how did you cut those pieces of drive cleats? Using metal shears? Thanks for posting this video.

@mikestevenson1819 2 жыл бұрын

Insulation video next 👍

@acservicetechchannel 2 жыл бұрын

Thanks for letting me know what you would like to see!

@stevelumumba1824 Жыл бұрын

You are an excellent explainer bro big ups and may God bless the works of your hands

@workhard3482 2 жыл бұрын

Wow didn’t realize that mastic comes in a tube. Looks better doing it that way then it is using a paint brush to brush on the duct butter

@acservicetechchannel 2 жыл бұрын

It is certainly easier, thanks!

@NoBody-ro3xj 2 жыл бұрын

Bucket is cheaper, tube is cleaner.... Both have their perks

@ironmike7160 11 ай бұрын

I did that for 5 years. Used a mastic bucket.

@williammackey7243 2 жыл бұрын

Thanks Craig, can you do a video on round? 🙏🏻 please and thank you 😇

@azrealgamer 2 жыл бұрын

Hey Chris bought your book love it 😀 can you do a video on how to wire a azure motor

@acservicetechchannel 2 жыл бұрын

David, thanks for letting me know what you would like to see!

@lui8295 Жыл бұрын

where do you find those hangers for the ductwork we cant seem to find them anywhere

@paulnagy8116 Жыл бұрын

Stagger your seams. Slip cleat u usually cut it 0.5" smaller than the duct to accommodate for the bottom lock seam.

@scottwebber652 2 жыл бұрын

Sealing the gaps n joints is key n never saw anyone do it.

@nasiruddin588 2 жыл бұрын

Yes I'm know this job and this ducting job 20 years service in the Singapore

@blessedson8045 9 ай бұрын

Nice job. I am looking to buy the same duct but I can't find it on lowes or home depot. Could you please help?

@missyrabbit5250 Жыл бұрын

does it need to be insulated for pier and beam homes?

@jimmygalarza5873 2 жыл бұрын

A book about commercial/residential duct size tons calculation, cfms' , etc soon? I like your videos and I will be the first one on line to order. 👍👏👏👏

@acservicetechchannel 2 жыл бұрын

Jimmy, thanks for the suggestion!

@Mudcat597 2 жыл бұрын

Nice presentation. Thanks

@acservicetechchannel 2 жыл бұрын

Thanks Roy!

@bestmandodad3850 Жыл бұрын

Just knocked out my first week in HVAC. That way if masting looks way easier than using a paintbrush 😄

@acservicetechchannel Жыл бұрын

Absolutely!

@ErcanALTINEL Жыл бұрын

Any info for the mastic used?

@ernestosaboia Жыл бұрын

Excellent video, from where you buy your duct trunk?

@user-pe5vq9cq1c 3 ай бұрын

How much does it price per hour for duct fitter in USA ?

@CMbassin 6 ай бұрын

Curious how you seal the back side with mastic.

@hangngoaigiare 9 ай бұрын

please have more duct videos whole house layout strategy thx

@donpatch9196 2 жыл бұрын

As someone that does sheet metal install professionally for industrial this was a weird video to watch. For one, the mastic I've always used is brushed on. For another we never use drive for hangers, we use strap. We don't screw into the drive then into the slip, as that compresses the duct and doesn't grip as well (though we also wouldn't use long zips for it so that may be a remedy). This video is also missing tdc/tdf connections though I doubt that ever comes up for residential. Either way, although really basic, cool to see how the other side does it. I'm used to hanging duct work in either concrete with tapcons or securing the duct using steel joice and/or unistrut. Never seen sheet metal duct work secured by wood beams but it makes sense for houses and the like.

@acservicetechchannel 2 жыл бұрын

Don, it is certainly much different when installing in commercial applications compared to residential and each face a lot of hurdles and are unique. This was just a basics for residential duct hanging, thanks!

@artojokinen1700 2 жыл бұрын

Well, I just use prefabricated ducts + connectors with seals, connect them with blind rivets and hang them up with threaded rods + supporting assembly beams. The advantage is no mess with sealants and works well with concrete ceilings and other harder materials. I wonder what kind of billing do customers accept when so much artisanal work is involved?

@qeesher 2 жыл бұрын

Could you post a video or picture? Thanks

@acservicetechchannel 2 жыл бұрын

Yes this video was meant to be on how to hang duct in residential applications. That is mainly what we do in commercial applications or spiral ducting, thanks!

@Anthony-nr1nd Жыл бұрын

Pretty good for a basic beginner video but you forgot to mention the prep work needed for the slip and drive to make the connections, for example spreading the slip and drive a little bit to make it slide easier also in some situations you can use a duct stretcher tool to help assist with putting on the drive connections, in other words I have seen so many different ways to do ductwork I was told by an old time tin knocker there is no right or wrong way to do ductwork as long as all the connections are air tight and sealed properly then it will work. Other than that great video!

@donwidla8204 2 жыл бұрын

But a real good demonstration thanks for doing this

@acservicetechchannel 2 жыл бұрын

Thanks a lot Don!

@drewc7479 2 жыл бұрын

Love the tin vids. Great for us AC guys and service lol . I did duct work and gas for my first 2 years I think metal is looked down upon too much there are guys at my company that are magicians at it. I actually miss doing it. Just if anyone knows the reason we put cleat the way we do. I was always taught to put both cleats opened on the outside , meaning the top cleat has its top opened and the bottom of the duct has the cleat opened on the bottom . I see in this vid they are both at the top ?

@acservicetechchannel 2 жыл бұрын

This way it keeps the ducts the same size. Whether both at the top or both at the bottom. everyone has their preference, just a basics video, thanks!

@lanesmith4422 2 жыл бұрын

My preferred method and I think the proper way is both s locks in or out. The issue is if installed as it is in the video the duct runs end up having an offset at the joint ( as can be seen if closely observed in the video) and in my opinion it looks like a poor installation. As far as the air flow and size of duct I would believe that it is insignificant and accounted for in the ACCA duct sizing tables. If installing as presented in the video the joints should be alternated, one up, one down,etc. Finally it should be noted that when installing rec duct runs particularly long ones, the snap locks or pittsburghs should alternate. When installed this way if there are inconsistencies in the duct fabrication they will self correct and allow a straight run.

@xJaxson 8 ай бұрын

The reason the S clete opening is on top is so the weight of the duct is sitting on the previous duct. With small ducts like this, it won’t make much of difference. Once you start hanging large pieces of duct different story, generally also why “standing S” is used in replacement to strengthen that connection.

@NoBody-ro3xj 2 жыл бұрын

A video on how to put square duct together standing up would be cool. There is still a lot of people that put it together on the ground.

@acservicetechchannel 2 жыл бұрын

Thanks for the video suggestion!

@NoBody-ro3xj Жыл бұрын

@Terrence Rucker if you know how to do it right it's always easier to do it standing. Especially on the knees.

@ThanhHuynh-hr8oc Жыл бұрын

Hi. Learning a lot from your videos. Is there an online distributor who will sell to the public.

@dw8282 Жыл бұрын

👍

@mikekolczynski5665 Жыл бұрын

Get a duct stretcher and a set of Malco duct clamps.

@doccontrol9479 Жыл бұрын

Wht music is it on 2.20-2.40 pls?

@chrisilangaratne2420 Ай бұрын

How to run supplies from the main trunk

@_GandalfTheGrey_ 2 жыл бұрын

So I’m order to get mastic on the side closest to the wall, you sort of have to use the last method no?

@averynw9180 2 жыл бұрын

you could try pookie on a stick, fish foil tape through, or cut a access hole similar to the process for cleaning ducts and seal from the inside.

@mph5896 2 жыл бұрын

Its a demo set. All situations are different. Figure out your situation and what will work best for that.

@donpatch9196 2 жыл бұрын

In a situation like that most people would opt to seal it up and then slam it close to the wall, but if it gets overlooked, finding a piece of conduit that will fit a pookie brush also works. You could also silver tape it all I guess, but putting some kind of mastic on the tape after helps with longevity. Your best bet would be to form it all up on the ground (as shown), pookie it up real good, let the mastic dry (will be dry the next day unless using a really wet sealant), and then hang it

@acservicetechchannel 2 жыл бұрын

You can do as Avery and Don are mentioning. In this instance, you can get to the back side of the duct from the top and bottom since it is 1" away from the back wall, thanks!

@_GandalfTheGrey_ 2 жыл бұрын

@@acservicetechchannel thank you for the reply!

@fluke196c 2 жыл бұрын

which mastic do you like to use?

@NoBody-ro3xj 2 жыл бұрын

Probably iron grip

@ananyasingh5521 Жыл бұрын

Brother What is your ongoing Sallary ?

@kangaroogod 2 жыл бұрын

Good video. around here 95% of the duct is snap lock

@acservicetechchannel 2 жыл бұрын

Thanks Kanga!

@Alex-jo2oi 2 жыл бұрын

You don’t use 3/4” zip screws in attics and crawls when going to wood to hold the duct work?

@acservicetechchannel 2 жыл бұрын

Those zip screws rot in crawlspaces because they are not galvanized. I have seen hole lengths of duct fallen and lying on the ground in crawlspaces. Thanks!

@Alex-jo2oi 2 жыл бұрын

@@acservicetechchannel good to know… thanks! Random question but I’m evidently new to the trade. Is there a solid budget friendly multimeter you would recommend?

@jaybee1930 6 ай бұрын

@@acservicetechchannelthey do sell zinc zip screws

@giovannicardone3803 Жыл бұрын

Never seen anyone do any of theee techniques in the commercial field.

@felixrblanco 2 жыл бұрын

Thanks, how about an insulation video? I know is basic stuff but there is a lot of new people getting in the trade right now.

@donpatch9196 2 жыл бұрын

I mean. Isn't it literally just cutting the insulution to size, a little bit of silver tape on the duct, fit the insulation tightly to the duct work, tape the seems up good, then white mastic on the outside

@acservicetechchannel 2 жыл бұрын

Felix, thanks for letting me know what you would like to see!

@NoBody-ro3xj 2 жыл бұрын

@@donpatch9196 does it matter?

@donpatch9196 2 жыл бұрын

@@NoBody-ro3xjJust seems bare bones basic is all. First hour of the first day on a job and you're near fully trained

@NoBody-ro3xj 2 жыл бұрын

@@donpatch9196 some people learn visually, some people learn by doing, some people learn by hearing. Some people just like to see other ways people do things.

@michaeltyers7336 5 ай бұрын

6:30 why screws not rivets?

@hvacspecialist22 2 жыл бұрын

No need thermal insulation?

@acservicetechchannel 2 жыл бұрын

This is just a basics for the three methods for connection, thanks!

@chrisnorris1379 7 ай бұрын

If that duct was lined I would have taped off clean edges for the calk. If it's being wrapped, slap some pookie on it and roll on.. we ain't painting the mona lisa..

@ae6eespage727 2 жыл бұрын

Took me hours to put a portion back. And it's this easy?

@kalin2628 8 ай бұрын

blud is using drive as a hanger strap

@rainprize2085 Жыл бұрын

you dont mention sealing the hard to reach areas. i presume that just isnt done.

@dallasbaker6970 Ай бұрын

My opinion is too close to the wall, and how are you going to duck butter the side closest to the wall

@user-kz6uc6zn6z 3 күн бұрын

Why don’t you use duct flange

@user-fo4yo7sn4m 2 ай бұрын

Why not just nail through the top of the duct into the joist.

@FernandoSanchez-dd1sd Жыл бұрын

He’s using drives for hangers

@gracida6 2 жыл бұрын

what about duct mate?

@acservicetechchannel 2 жыл бұрын

That works too!

@uhohyotab9467 2 жыл бұрын

S lock

@pankajactechnician9110 2 жыл бұрын

How to get a job .. please explain

@mph5896 2 жыл бұрын

Apply, check up on application, pester the company if you need to, get a referral from a friend. Show up to interview onetime, clean, respectful. Be prepared for interview. Make it easy for the person to hire you.

@benjaminbills1998 2 жыл бұрын

High demand. You just ask for the job

@chaddarr4834 2 жыл бұрын

Iuiii ok

@seaerj6710 2 жыл бұрын

or just use hangers

@UltraHydrophobiccoat 2 жыл бұрын

No insulation inside?

@NoBody-ro3xj 2 жыл бұрын

It's a demo. They will always make it with the least amount of struggle.

@donpatch9196 2 жыл бұрын

Sheet metal ductwork very commonly doesn't have insulutation inside. I recently did a VA hospital and am currently working on a bio lab and it's all just exterior insulation. So it's not entirely necessary it seems.

@NoBody-ro3xj 2 жыл бұрын

@@donpatch9196 do yall make your own duct work?

@donpatch9196 2 жыл бұрын

@@NoBody-ro3xj At the VA it was a third party company. For the bio lab, it's been our own shop. I don't personally make the duct work though. I've had to do field work like miters or reducing/changing the size of duct, but nothing like actually operating a pittsburgh machine or anything like that.

@NoBody-ro3xj 2 жыл бұрын

@@donpatch9196 it might be a state thing but most places around here in n Utah we build our own duct insulate the inside, and install. The only people that don't do it also don't build their own duct and sub out the insulation.

@JOlivier2011 Жыл бұрын

I just feel like.......Bruce Willis would not fit through there.

@dineshbhoibhoi583 Жыл бұрын

Sir I am duct fitter you have vacancy tell me

@Threee_Eyez Жыл бұрын

Calm down there buddy

@jamesholder5725 2 жыл бұрын

Slip and slide 😂🙄😂

@acservicetechchannel 2 жыл бұрын

Yup!

@monteglover4133 2 жыл бұрын

Invest in a Whitney punch makes installing screws much easier. I’ve always used long hex screws to hang the duct to the joists. Why so many screws, I thought 2 was all that was needed.

@acservicetechchannel 2 жыл бұрын

Certainly a hole punch is easier if you are hanging a lot of duct! I have actually seen a lot of those 1.5" long zip screws rotted when hanging duct with them when they are screwed into the joists. Crawlspaces are really wet here by the ocean so we don't take any chances. Two screws on each to be safe, thanks!