Hi Randy! I love this, you are so fab. I really ENJOY the WAY you teach. You succeed in making the student (me) feel on a equal level, there's no arrogance in your teaching, so refreshing! I have this tool, bought recently, but I haven't tried it yet. This is exactly the video I was hoping for, and from the right guide, thank you.

Engraver & Handpiece: Engraving Adapter - bit.ly/EngravingAdapter H.15 Hammer Handpiece - bit.ly/h15hammer H.15D Hammer Handpiece - bit.ly/PepeH15D Amazon H.15 Hammer Handpiece - amzn.to/2A1KDDa Amazon H.15D Hammer Handpiece - amzn.to/3eOM9rd Combo Kits (Save some money if you don't already have the other tools): Everything You Need Starter Engraving Kit - bit.ly/EngravingStarterKit H15 With Engraving Adapter - bit.ly/H15withAdapter H15D With Engraving Adapter - bit.ly/H15DwithAdapter Foredom Classic Jewelers Kit with H.30 Handpiece - bit.ly/K2230 Engraving Balls & Blocks: Cheap 5" Engraving Block - amzn.to/2zWqG0O Expensive 6" Engraving Block - bit.ly/6inEngravingBlock Misc Other Helpful Tools: Lions Claw Solder Tool - bit.ly/LionsClawSolderTool Fixturing Compound aka Moldable Plastic Pellets - amzn.to/2XxfUHg Use this link will get a free trail of Skillshare Premium and help support the channel: bit.ly/GomeowCreationsSkillShare ________________________________________________ If you are looking for more tools and materials that I use, well you're in luck! I made a page on my website just for that and I'm updating all the time so bookmark it to stay up to date: GomeowCreations.com/tools-and-materials GomeowCreations.com/partners-discount-codes ________________________________________________ My PATREON ➜ patreon.com/GomeowCreations One time support ➜ paypal.me/gomeowcreations ________________________________________________ Instagram ➜ instagram.com/gomeowcreations/ Facebook ➜ facebook.com/GomeowCreations/ ________________________________________________ #engraving #jewellerymaking #jewelrymaking #goldmaking #silversmithing #diy #gomeowcreations

Thank you for the awesome products and tips with this video! I love watching you create!!!😌

This is great, thank you for mush for sharing. What video set up do you use? I find getting a good angle for engraving videos is hard

Great info, thank you!!

Thanks for your videos by the way, they have been so helpful :)

Your content is always so unassuming yet amazing (and useful!). I have Polly Plastic but didn't think of simply melting it and popping it directly onto the work holder.. also, as someone else commented, this setup probably wouldn't work with my beginner's rotary tool (a Wen) but still good to know... Thanks for sharing Randy!

Hi and thanks! Would you use this with an onglette, during the process of moving metal, to raise a bead? (I hope that makes sense: The first part of the process. Not the actual beading step.)

Thanks for the demo

I googled hammer handpiece and Eurotool has one!!! Thank you for this video I did not know they had one. Appreciate you so much.

Thank you so much! Hooked on your videos and subscribed a while back. I have been looking for a graver that would attach to my hammer handpiece, I figured there has to be such a thing and couldn't find it. It's like your channel is custom made for me.. guess I finally need to check out Pepe tools! Thanks for all the good work!

I got one of these last year and couldnt get it to work. It would just dig into the metal and hang up, so i quit trying and moved on. Now i see i should have lowered the angle after setting it in initially. I'll have to revisit it and see what it can do. 👍🏻

Thanks for another great video

What vise do you recommend? I don't have one but need one! Do a lot of bezel settings as well.

Thank you for this video. Does this work well enough that you could engrave scrolls?

Dude thanks so much for showing me this. This video must be among like a thousand others that my browser wants me to view, but yours actually had a very pertinent advertisement for me. Polly Plastics Sponser this Man!

Thank you for your hard work where do I buy the engraving tool I already have a flex shaft and I would like to pursue a Purchase

Very informational video! Can this be used to make bright cuts, or is that better done by hand?

Ahh, thanks for the video Randy! I didn't think I could find generic versions of Thermal Loc, so you have helped me save a bunch, Cheers!

i always pick up new tips, techniques, or products to check out when i watch one of your videos. thanks.

Just ordered mine ! I got the gold color ? It comes with the flat tip so ,I ordered the one your using . I have used normal engravers ,so this is my 1st try .Thank you for your info very helpful ! 3rd generation jeweler 35yrs hand made jewelry !

Wow gorgeous design. Great tool that I must get

How is this adapter for stone setting such as pave etc?

Can you tell me what kind of tool you're riding on a puncture machine? I have Marathon micoromotor . Can i install it in my mshin ؟!

So happy I stumbled on to this video

Hi sir , will beading tools fit this adapter to push prongs ?

Thank you so much!

I like that you used this without being an expert . Lots of beginners watch you ! I bought it a while ago not knowing the 1 st thing about engraving . Question: Did you have to prep the graver before ? Sharpen it? or anything ?

Love videos❤

Hello Randy will this work with the classic Foredom Shaft? I didn’t see this tool attached to anything. Thanks, Michelle

Thank you for this video, it was just what I needed! Question: was there any prep to the engraver piece before use? (sharpening of the tip?)

Where can I get the extra graver kit? What is the paper you use? Where to buy it ? Thanks o much . You were the reason I bought the adapter. Thanks much

After taking an engraving class, I've been looking for a cheaper alternative. Just purchased. Thank you!

Can I use this to do diamond dust

Hey Randy! Thanks for your helpful videos! Can the LPF adapter be used to do bead and bright settings? I’m thinking to purchase one but need to see if the bead and bright can be accomplished.

Do you use SR shaft or you have to buy LX one?

I'm useing my stimulus to buy this to engrave my jewelry! Thank you

Very nice.

What’s the vise that he puts it in to keep the piece steady before engraving?

I have the harbor freight flex shaft do you know if this is compatible?

I want to the buy thiseachin pls give me link sir and i want also drillachin for doamond setting

Very nice work! What I wanted to ask is there such a tool for dremel? Thanks

I like the technique you used, I like the bezel where the stone is set, it's absolutely beautiful. What I don't like is the decorative shield ornament, but that's just a matter of personal opinion. Anyway, good work and thanks for sharing this technique ^_^

Was that liver of sulfur you used for the patina? Inever get it to look that good on silver

I come from a Chinese handmade jewelry factory.i see making that are very cool

Sideways that looks like a crab in seaweed. Can't believe i haven't found you before! Instant subscribe

Plse gime the link sir and wht is the name of tool and machin will you tell me sir

Have you tried thermal lock to hold things in place? I like use it and like it

what is the engraver attached. can you use your boredom Maureen Chandler so if I use my boredom, do I have to have the hammer flex chaft. thankyou

Were can I buy the tool for engraving? I already have the other part that I use for stone setting in bezel.

Work on metal/ parts motors?

Absolutely brilliant... Ive always wanted to trying engraving... only problem is I ended up buying the Dremel Foriflex pendant motor instead of the Foredom (it was about 💷£100 cheaper tho 🤑). Although both machines handpieces look identical, you can bet theres a hairs width diference and these wouldnt fit lol. Ive been watching (Instagram) and waiting to see this pendant come together and boy did you bring it to life, fabulous job. The engraving really made it pop. Thats the same Liver of Sulphur I use... has a rather 'unique' smell don't you think? 😖🤭😂hahaha. Sending you hugs from little ole England ❤🧡💛💚💙💜 (As always Thank You x)

Thank you for this video,, can I know the name of the yellow adapter you use ?? For engraving ? I have the foredom h15 handpiece. But asking about the yellow part that hold the blades . Thank you

How can anyone not want to watch you . You're I bought a magna graver. Not near as expensive as those high-end ones. If you think about , I'm seeing a older gentleman with a mop and shot pool with it and he was literally the best in the. Get my point great video thank you very much

That polly plastic stuff looks better than pitch. Is it used instead of pitch, or only for certain things?

I love the hermit crab vibes of the piece but can we talk about that bezel?! Did you make that or is it a prefab pattern you buy? Its beautiful

I have an ordinary rotary tool, can I do this with a pointy tool bit? I have one of those in my collection of random bits!

Have you done a video on setting bezels with hammer headpiece? I'll check to find it. Oh, I caught that at the end. Lol

You are so good w/ that saw! How long did it take you to get so good. I've been doing this for about 3 years and I'm still struggling w/ the saw. It's one of my least favorite things (actually I f*n dread it every time)

What kind of fluid u use to darken the silver?

Will it work for any other fllexshift

Will this hook on to a Dremel?

You just opened up a whole new world! I saw also that you used a tool for setting your bezel, is that more effective than the hand tools?

Cool crab!

Randy how do you think this would work for bright cuts ?

I wonder if you could glue a piece of leather on the end of the hammer so it still hammers but not metal to metal? 🤔 Great video Randy, thank you 👍

Wow to order egriving adapter plss tel to me

Just used your code at Pepe to buy my adapter so I hope you earn a bit back for it! Love your videos!

Awesome, thanks for sharing this! Where can I find the discount code you mentioned in the video? I have looked everywhere on hour social media, website, etc. Thanks in advance!

Bom trabalho

Wow!!!

You have ants! Great video, thank you.

Can this be attached to a dremmel cord ???

Could you add the silver piece onto the moulding section when it is tacky rather than when cold and then having to reheat it? Thanks for this great video , Caz @cazwadejewellery

What if you want to engrave letters or phrases?

I tried to purchase and it was over $100 but it did not show a $30 discount. Is there a discount code?

it's that stainless steel ? How much mm ? Nice video btw

where can i buy the engraver please? the plug and go part as i have a dremmel already..

Is there something like this for dremmel ?

Fold the paper and trace from the back, the pencil will leave a ghost impres7that is perfectly mirrored.

Name of tools?

Basically you could do this with a Dremel

So why cut the holes with a saw instead of drill them?

Whats the discount code

what's your code?

So brilliant that you do these amazing videos, definitely helped me through this difficult worldwide crisis, and given me confidence to try new methods, thank you so much , Caz @cazwadejewellery

❤️🇨🇦

after you put an ad inside the video with ads I

buy a magnagraver from Ngraver.

Clickbait. This setup will cost well over 200. Good job luring people in with clickbait. You can literally buy an entry level pneumatic engraver for the price this would be to convert a dremel.

put some sawdust under stone // ya buried it to far //

:D

Thanks for introducing SkillShare. Actually it was - for me - more useful than your videos 😁

The very least you could do before promoting the freebies you get to advertise is LEARN HOW TO USE THEM!!!!!!!!!!!

Speach and or English skills badly needed.