ADDING AN ABSOLUTE GAME CHANGER TO OUR TRACTOR!

Рет қаралды 57,200

Жыл бұрын

We've got a bed full of new goodies for around our place. Okay, it's only a Ranger bed full, but still we've got new stuff! We've got bird houses, mole traps, basketballs, hydraulic top links, air hose reels, and just lots of stuff!
Stuff in the video!
Hydraulic Top Links: www.amazon.com/shop/goodworks...
Wall Mount Hose Reel: www.amazon.com/dp/B07CMJTRXJ?...
Bluebird Houses: www.amazon.com/dp/B01N7G02XH?...
Mole Traps: www.amazon.com/dp/B000SDKGC6?...
Good Works Tractors is happy to be sponsored by Rim Guard Solutions! This is perhaps the most well-known ballast brand on the market today. Rim Guard goes right inside your tires, so it's out of the way, it doesn't freeze, and doesn't corrode. It's made from natural materials, so it's safe around livestock and pets if it spills out. Rim Guard liquid ballast adds more weight to the back side of your tractor improving stability, loader performance, and power to the ground. Find your closest dealer at bit.ly/3d0whX0
LOOK AT OUR MOST POPULAR ATTACHMENTS!
Speeco Quick Hitch: bit.ly/3NFC0yl
Stump Wrecker: bit.ly/3WYa6Tf
VersaBracket Combo: bit.ly/3wUPrnl
Snow Pusher: bit.ly/3NB4BVw
Tillers: bit.ly/3GT1kk1
Core Plug Aerators: bit.ly/3W0R25q
Pallet Forks: bit.ly/38wRztu
Grapples: bit.ly/3PNNYaZ
Dethatcher: bit.ly/3GT9Zmk
Tractor Canopy: bit.ly/3IHcvNU
WANT TO SAVE MONEY? CHECK OUT THE GWT DISCOUNT CLUB! Use code GWT at any of the vendors below and you will save cold hard cash :) I will also get a commission for the sale, so it's a win-win-win!
USE CODE "GWT" TO SAVE BIG WITH:
BUCKET BRACKETS @ www.jufabworks.com
CUSTOM GRILL GUARDS @ www.5elevendesignz.com
PTO QUICK ATTACH @ tractorptolink.com
DIY HYDRAULIC SOLUTIONS @ www.summit-hydraulics.com
GAME CHANGING GREASING SYSTEMS @ www.lube-shuttle.us/store
TIRE CHAINS @ www.tirechainsonline.com
PREVENT FLAT TIRES @ www.multiseal.us
CULTIPACKERS & CRIMPERS @ www.packermaxx.com
ALL OEM JOHN DEERE PARTS @ www.247parts.com
ACCESSORIES AND BACKHOE BUCKETS @ www.muddscustoms.com
CUSTOM TRACTOR FLOORMATS @ www.tractormat.com
PROTECT, ORGANIZE, IDENTIFY HOSES @ www.outbackwrap.com
BOX BLADES FOR ATV'S @ www.northwoodsfabrication.com
HYDRAULIC SYSTEM PROTECTION @ www.hoseendchamer.com
DUMP FROM THE SEAT MATERIAL COLLECTION SYSTEMS @ www.proteroinc.com
POWERED SWEEPERS SWEEP UP ANYTHING @ www.sweep-all.com
EASY WHEEL TOP LINK HANDLE @ www.tractoraftermarket.com
TIRES, WHEELS, AND DUAL ADAPTERS @ www.millertire.com
AMERICAN MADE CARRY ALL ON STEROIDS @ http:www.bigtoolrack.com
THE BEST TOOTHBAR AND MORE @ www.heavyhitch.com
5% OFF WITH CODE GWT AT TRAC SEATS! www.tracseats.com
SHOP: www.goodworkstractors.com
AMAZON: www.amazon.com/shop/goodworkst...
SUBSCRIBE: / goodworkstractors
LIKE: / goodworkstrac. .
FOLLOW: / goodworkstra. .
MERCHANDISE: stores.inksoft.com/good_works...
*Discount codes cannot be combined with any other promotions, offers, or deals!
**I choose to sell some products through 3rd parties instead of stocking items myself. Know that I will receive a commission if you choose to purchase through certain links. Thank you very much for your support!
This video is for entertainment purposes only. Good Works Tractors (Good Works Lawn & Power, LLC) cannot be held responsible for content found in any video. Always reference your owners manuals, use extreme caution, and proceed at your own risk.

Пікірлер: 148

@sunseeker6088 Жыл бұрын

The shop is looking great……..nice and bright. I’m totally jealous

@GoodWorksTractors Жыл бұрын

Thanks Sun, it's coming together!

@roywaldrop6151 Жыл бұрын

The fittings on the cylinder are banjo fittings. They are used a lot in fuel systems on diesel. You want to put a copper washer on both sides of the barrel so it doesn't leak.

@Raul28153 Жыл бұрын

I saw that too.

@nekret Жыл бұрын

Hey Courtney, the fittings on those hydraulic lines are banjo bolts, there should be 1 copper washer on each side of the hose fitting to allow it to seal to the bolt head on one side and the hydraulic cylinder on the other. First time I've seen these on a tractor but they are super common on automotive brake and fuel systems.

@GoodWorksTractors Жыл бұрын

Thank you Nick, I think they are a good idea.

@nekret Жыл бұрын

@@GoodWorksTractors you may want to double check those washers as it looks like they got stacked all on one side of the hose fitting.

@phillip3165 Жыл бұрын

You don’t have to jerk the air hose reel. The “ratcheting” noise is how you lock the reel in place at a specific distance. To reel it back in, you pull it gently beyond the “ratcheting” noise and walk it back in. It’s a game changer in any shop!

@breakmytee93 Жыл бұрын

As many have suggested already, Harbor Freight for hand tools. Especially if you're considering Husky, I would just buy HF instead. I have both Husky and HF and don't see much if any quality differences. The only "benefit" to the husky is that it's a one click purchase. The HF tools you may have to buy a few different items instead of an all in one package, but will likely be about half the cost. I don't have any of the HF tool cabinets, but I've only heard good things. Plus if you get the HF hand tools, you're already there and can get it all at one place.

@tangoseal1 Жыл бұрын

Ive been running a top and tilt link (2 cylinders, one for lift and one for in and out) on my Kubota L4060 for quite some time. I am surprised that no one else knows about these. Good job making this an option for the smaller equipment Goodworks! They are an absolute game changing add on for your machine. Makes it incredibly more useful in so many ways. I use mine to change the pitch of my 6 foot rotary cutter so I can float the deck just off the ground and not drag big lines in my fields from the steel rails on the cutter. Box blading is a whole different dimension of capabiltiy. You should really consider selling the lift links too ... it is just a cyliunder that goes on the side of the 3 point so you can tilt the implement as well.

@braddsn Жыл бұрын

I have used every mole trap on the market. These that you have (mine are called "Mole Eliminator") are the best that money can buy. They are almost 100%. If the trap is sprung, you can bet there is a mole in it. Before I used this model, I had tried others and the moles were winning the battle. Most traps only have about a 50% success rate. I now have 6 of these, and I am finally winning. I am nailing them every time. And as for the top link, I couldn't agree more. The hydraulic top link and Pat's easy change system are both game changers.

@Lazy-F-Acres Жыл бұрын

Happy to see that the info I sent was beneficial! And you’re right… I’m spoiled now as well. It’s a lifesaver when using something like a box blade. The only difference between your install and mine was that I flipped the cylinder over so the hydraulic lines were on the bottom because that bolt was hitting the top link bracket just like on yours. Good to go! Aaron

@robertwikeljr-1522 8 ай бұрын

Battery cover - put two screw eyes with body washers / acorn nuts (eyes inside) on cover, attach a bungee cord to each and run in to frame. If color of washers / nuts bother you darken with phosphate dark bluing or paint.

@number40Fan Жыл бұрын

Copper washer goes on top and bottom of the fittings at the cylinder.

@FalconLX-nf9uz Жыл бұрын

I bought a Harbor Freight US General 34” tool box and love it. Holds a ton of tools. No advice on the tools but Tektron has some nice looking stuff!

@crazysquirrel491 Жыл бұрын

Hey Courtney two words harbor freight been using their hand tools semi-professional close to 20 years have only broken to ratchets and I was definitely over abusing them definitely worth looking into their tool boxes are no slouch either good luck man keep up the good videos and all the tons of information

@wes9731 Жыл бұрын

We had HF US General toolboxes at my last job, they were really good. I bought a 44" HF USG for my new job, its a great box. their prices have gone up on the boxes, but occasionally a deal pops up but either way good boxes

@joshstone4102 Жыл бұрын

Also HF hand tools are lifetime warranty

@daveschmidt5713 Жыл бұрын

I'd go after tool collections from estate sales. The older generation bought tools to last and a tool for every task.

@bobandes2016 Жыл бұрын

Proud "toolhead" here. It's always entertaining watching non "toolheads" do thingies. Keep entertaining us.

@KPVFarmer Жыл бұрын

That is sweet!!! Thanks for the video and demo!!!

@richardnorris9435 Жыл бұрын

I always use a thread sealant on all my hydraulic fittings, it works great for me for 40 yrs

@linctexpilot8337 7 ай бұрын

Just never use thread sealant on a banjo bolt

@dougjohnson1199 Жыл бұрын

Just a thought, but you can put some Velcro in a strategic spot on the back of the battery cover to help hold it on. love your shop (envious) Be well.............

@tcmits3699 Жыл бұрын

Those bano bolts will eventually loosen. What is needed is a double saddle clamp between the two bango elbows to keep fittings parallel. The continuous up and down, and in and out will act like a wrench and loosen those hydraulic fittings. Could you do a test on electro-mechanical top link, i believe from Showa from Japan, very simple for us "no rear hydraulics guys". Thanks again

@MrKThomas1976 Жыл бұрын

Harbor freight is an excellent selection for a toolbox. I have one it’s a little bit cheaper than a husky better quality variety of colors and you can always add on side boxes also,I think it’s checking out,it’s better to spend the money on the tools then a X amount thousands of dollars on a snap on toolbox,that just sits there and hold tools. Just my opinion.

@GoodWorksTractors Жыл бұрын

I checked out their toolboxes last time I was there. Definitely in contention!

@bobheisserer9046 Жыл бұрын

Ditto on the HF toolboxes, I've had one for two years running and love it. Wait for one of their 20% off coupons, usually come out around the major holidays.

@wadehicks8013 Жыл бұрын

I’ve got US General toolbox and it’s great. Had it for a few years with no trouble. Modular design is handy too.

@Mate2Frio Жыл бұрын

The one you got is like the one I had to replace after a year. The top end Harbor Freight hose real will last longer. Earthquake XT for the HF one.

@robbypelfrey7677 Жыл бұрын

I looked at all the chest before deciding on the Harbor Freight box. The quality of the steel and the build compare to some a lot more expensive. From my research it was the Best Buy out there.

@mattheww8695 9 ай бұрын

Courtney addresses this briefly, but there’s more. At 15:38 you can see Summit’s top link hanger actually flexing as the top link banjo bolt presses against it. The hanger plate itself is a heavy piece of kit. Continued contact it will eventually cause the banjo bolt on the hydraulic cylinder to fail (leak). I have this same setup and I removed the Summit hanger. It doesn’t fit the hydraulic top link anyway because it’s so much bigger than the stock manual top link and based on my attempts on the bench, the plate can not be bent back out of the way. Maybe this will help other Summit TX25 owners.

@trm64 4 ай бұрын

I've got the Summit too. Which top link did you get?

@kylerayk Жыл бұрын

You can't go wrong with the Harbor Freight U.S. General tool cabinets with the ball bearing drawer slides. We use them almost exclusively at the world's largest animal health pharmaceutical company.

@TylerHadley4 Жыл бұрын

We have about 7 of those hose reels mounted from the ceiling, one on each side of a work bay. The black stop collar can be moved so the beginning of the hose is about 7 feet off the floor. We do the same with power reels.

@Iceheart721 Жыл бұрын

For a full standing tool box, you'll be hard pressed to find a better quality box for the money than Harbor Freight. But wait a few weeks, the new gen 3 us generals are rolling out now. If you don't want or need a top box, huskys rolling work benches are a great option but limited on color. Tool wise, I've worked with a hodge podge for years. Mostly craftsman with dewalt power and a bit of snap on/mac tossed in, but since craftsman were discontinued then sold, and remade the quality isnt there. Over the years sets get incomplete and tools fail I've been replacing with Icon from HF aswell. Dewalt power tools have fallen off aswell so I run Milwaukee. M12 ratchets with 3/8 impact, m18 fuel 1/2 impact and grinders. I don't even use air anymore except for tires. No more extension cords either.

@R.L.woodbaron Жыл бұрын

BoxoUSA makes some really slick tool chests that keep everything organized and you know immediately if you’re missing anything. Cleetus has an old video of one on his channel.

@garylenzen3534 Жыл бұрын

Get a gen 3 US General tool chest from Harbor Freight

@glennschatz8389 Жыл бұрын

Put up peg board style access for your tools and get a cart to use for your tools with a work top. When you take a part off to work on you have a place to put it. You’ll have the tools you need, and when you’re done push the cart with tools over and hang them. Open space? Missing tool. And less exercise getting everything put back.

@hhazelhoff1363 Жыл бұрын

Harbor freight alll the way for tool chest , I bought multiple and made a whole wall for a very reasonable price, assembled

@geraldjohnson1363 Жыл бұрын

Make sure socket and wrench sets are complete. Some interchange with each other. Tool boxes need to fit the wrench and socket holders you are going to use.

@utetopia1620 Жыл бұрын

I've been watching Wranglerstar for some time. Love the homesteading type content. Lately, I've been in the market for new compact tractor, so I've drifted towards your videos a lot for information, but I'm also enjoying the "homesteading" type videos, like this one, and I'm watching Wranglerstars videos less and less.. I'm not liking the direction he's taking his content.. and thats his choice, but I'm watching more and more of yours!

@wildearpsadventures4991 Жыл бұрын

Tool chest - Menards tool boxes are better IMHO because thier drawers are thinner, which makes for better organization of the tools. The deeper drawers just get filled up and makes it harder to find what you're after. I dont have a Menards anywhere near CA but they delivered it for a small fee.

@CanDoITEveryDay Жыл бұрын

What size hydraulic top link did you get for your Summit Tractor? The Amazon link you provided in your video description brings me to a Amazon Affiliate link with several to choose from that appear to be different sizes. Thank you in advance and for putting out these helpful videos.

@trm64 4 ай бұрын

I have the same question...

@threepercenter5297 Жыл бұрын

Homak builds a pretty nice tool box for the price, I manage a diesel repair shop and we have three of them that have held up nicely after 5 years of daily use.

@GoodWorksTractors Жыл бұрын

Thank you, I've not heard of them. Will check them out!

@tomasgimenez4592 5 ай бұрын

Lots of toys in that shed!

@lilfoot460 Жыл бұрын

10:02 US General boxes from harbor freight are the best for the money. I have several but can figure out how to put a pic in my comment lol

@wtfdoicare Жыл бұрын

For "cheap" tools, I really like tekton, local MI company too. Harbor freight tool chests are actually legit IMO.

@user-dh3mj1vu3q Жыл бұрын

Montezuma tool chest. Can't go wrong.

@kmisercola7180 Жыл бұрын

Teflon tape would have been helpful depending on which type of fitting. Another good video.

@tylerd4522 Жыл бұрын

As others have stated, the fittings are banjo bolts, and allow fluid flow regardless of hose orientation. As various tractor models are different, a singular hose orientation may not work between multiple models. As for the hose reel, probably every reel I've ever worked with has a series of 3 noticeable ratcheting clicks, where it'll lock. A gentle pull beyond the 3rd click or locking position will allow you to walk it back in. And HANG ON! Some of those springs can be extremely strong, allowing for the potential for damage to property or injury to people if somebody's in the wrong place at the wrong time! I myself usually grab that hose stop, (what I call "the donut"), as it helps prevent the hose from slipping out of your hands.

@kfaust154 Жыл бұрын

my home toolbox is a craftsman professional series and it is a good box, does get a bit wobbly if i have it loaded too much, i used it for work for a few years before upgrading to a snap on master series and its built like a tank but would not recommend a box like that unless you are in it all day every day

@loghomeable Жыл бұрын

Harbor freight is the way I've gone for tool box and tools.

@lanceodell8058 Жыл бұрын

See if ICON tools will sponsor a full set tools and cabinets

@eddiesequoia5293 Жыл бұрын

A couple of observations for you, when you have all your vertical storage racks where you want them. Secure them to the floors and wall. Now that you replaced the battery cover on the Gator, you'll find the one you lost.

@lwwarren Жыл бұрын

Jackshaft garage door openers. Remove those horrible overhead door openers and add a low profile track kit to your door tracks to snug them up against the ceiling. Mine run about 2" off the ceiling so they don't interfere with my full height lifts or anything else up on the fork lift.

@nedrhoades9994 8 ай бұрын

liked to watch a video about tractor. 4 minuets in and have to go. haven't seen anything about the topic yet.

@GoodWorksTractors 8 ай бұрын

See ya! 👋

@AdamTDelisle Жыл бұрын

Harbor freight US General boxes are very high quality for the price, better than husky!

@Jasonrcsd Жыл бұрын

I used to room with the assistant coach of the Clippers. He would tell you keep practicing but don't get your hopes up. The other thing...expect to lose everytime when your playing against the camera / editing / producer because he will edit the film every time. 😂

@warped2875 Жыл бұрын

Ranger battery cover security: 3/16" drill adjacent holes in suitable place & a black zip-tie. Banjo fittings

@alfilkemper9240 Жыл бұрын

You need a dachshund or cat. The moles, shrews, moved to the other side of our fence. (sadly, neighbors).

@gregoryscott7596 Жыл бұрын

I saw where Millennial Farmer got a full took kit setup including boxes with Gear Wrench tools. Don’t know much about them but maybe worth checking out

@Panhandlehomestead Жыл бұрын

Haha nice vid. 👍👍love the top link

@tomdesantis938 Жыл бұрын

Harbor freight has great tool chest

@Markam248 Жыл бұрын

US General at Harbor Freight is a good option.

@michaelbaumgardner9493 Жыл бұрын

Good afternoon. I buy Cornwell. Yes it stings. But I grew tired of braking, cracking, twisting off, broken pry bars, yada yada. I only use 6 point wrenches and sockets. Grew tired of call, wait, explained, sorry can't help you. Hence Cornwell. But it's my application, doesn't mean it'll work for your application. Now I do have Icon impact socket sets 3/8 & 1/2. Milwaukee M18 impacts, drills and grinder. Good luck with your search

@CliffordAllison Жыл бұрын

Great Video and I have a question. I have the rear hydraulics for JD 1025R for rear but if I connect the hydraulic link where would I install the switches or how would I move it backward or fowards ?

@GoodWorksTractors Жыл бұрын

Hi Clifford, are your rear hydraulics there to operate the backhoe? If you have a regular rear remote, then you'd have a lever somewhere on the operator station to control it. The hydraulics for the backhoe are an open circuit that allow fluid to freely flow. The backhoe has it's own levers to control what happens with the flow.

@slip0n0fall Жыл бұрын

I think I'd drill a small hole in the top release hook of that battery cover, run a black zip-tie through it, just in case!

@ronaldferino3414 Жыл бұрын

My son has a large Snap On tool box where he works I think there to expensive for my liking. We went to Harbor Freight and the have the Icon brand tool box which seems well built. So we took tools off the shelves and really loaded it up and was very impressed, the drawers rolled in and out smoothly with no issues . I'm not saying there the best, but for the money they seem very well built , I think there around $3,500 give or take a little for a seventy two inch box and were probably going to buy one for his home garage when he's ready. They also have smaller sizes at a lesser price's depending on what you need. Just an idea it's only my opinion so it's something to consider looking at and making your own decision about.

@Formulabruce Жыл бұрын

Tool Storage is what you want, and need. Get a small cart to temp. put tools on and work out of the cart, then wipe and put away..

@On_The_Farm Жыл бұрын

Yeah, I need to get a hydraulic top link also. Very handy.

@GoodWorksTractors Жыл бұрын

Definitely, I'll be putting it to work today with a box blade.

@matthollon8645 Жыл бұрын

I use, Mallet 0.5 G insecticide for moles. It’s a granular and easy to spread I use 60lbs per acre and have seen good results. Hope this helps

@justkane78 Жыл бұрын

Look up gopher hawk for your rodent issues. thanks for all the great videos!

@wurstest Жыл бұрын

I enjoyed "old guys playing ball"

@pennylessplantation Жыл бұрын

Believe it or not because these guys get a lot of hate but the new series 3 US general boxes are pretty nice. The 34 inch service bank is really nice and has bumpers and 4 grease-able swivel casters that you can easily push in any direction. The coyle tools channels has an in depth video called which tool boxes are the worst. Good source of info and the new slate gray color the boxes are coming in is popular.

@GoodWorksTractors Жыл бұрын

Thanks for the recommendation. I'll look into it!

@seanwahl1000 Жыл бұрын

As long as the drawers slide nicely, I'd go with the 1k chest.

@AutoBob5434 Жыл бұрын

you'll find the battery cover you lost now that you bought a new one.

@matwatts5909 Жыл бұрын

I’m a gm tech and I watch guys spend 10s of thousands of dollars on tool boxes and I’ve been using a $600 husky box for 8 years. Save money on tool box and spend money on tools. I’m a big fan of gear wrench. Get a harbor freight roll cart so u can move ur tools to ur work and not have to move ur work to ur tools

@badgerlandturf Жыл бұрын

That Easy Wheel is a great alternative to the hydraulic top link if you’re fitting deficient. I just got mine a bit ago and it makes adjustments so much nicer. Didn’t see a close up in the 3 point lever, did you add a second switch to move in and out?

@Lazy-F-Acres Жыл бұрын

The Summit TX25H comes standard with the rear remotes and a handle/lever. Plug and play!

@gilbertpadilla4496 Жыл бұрын

Banjo fitting oil lines .brake lines

@terryk3118 Жыл бұрын

Easy Wheel looks like an ingenious add-on. Does it block access to anything on the back of the tractor? Will they give me a GWT discount on this item?

@GoodWorksTractors Жыл бұрын

Doesn't block access to anything...you can save 5% with code GWT too.

@andrepoirier3529 Жыл бұрын

2 washers one on top and the other in bottom and they are called banjo fittings

@Noah_E Жыл бұрын

Maybe not the most elegant solution, but I would consider drilling a hole in that battery cover and zip tie at an easily accessible area. That or a J clip and screw/bolt if you remove it often to use a trickle charger.

@GoodWorksTractors Жыл бұрын

I just hate the idea of having to do that to an OEM part, but you're right that it would solve the problem. Or I sell it and that would solve the problem too :)

@TheMonkdad Жыл бұрын

When I stopped caring about my lawn the moles disappeared, I have more time and I don’t worry about chemicals getting into my well and ornamental pond.

@GoodWorksTractors Жыл бұрын

I haven't got to that point yet

@larzakalazerath6655 Жыл бұрын

for a tool chest for basic stuff in that building just go to Harber fright or Northern tool don't pay the mark up on Husky. A U.S. GENERAL would be just fine for that or the Montezuma seem well built. I bought a Husky Stainless 12 years ago it has held up OK just seen a number of nicer ones over the last 6 years for less money. You'd be better off piece mailing a tool kit together then buying one of the "Master kits" as they always skip way to many sizes as they try to match SAE with Metric. Just look at how many skip right over 15mm then hit 17 to only then jump to 21,22,23 just like the SAE will give you 3/4, 1 and 11/4 but must often skip 11/16 and 1 1/8. and JD excavators love using that 1 1/8 nut and bolt combo so you always need two as they love making it impossible to get a socket on half of either side.

@jamesberg3106 Жыл бұрын

Call it your wake up reel. When you’re tired and in the closet, it will wake you up

@kmisercola7180 Жыл бұрын

Folding key is a good idea, better idea would be for Summit to change the location of the key. The kiss rule, keep it simple st$$@@D.

@chief1193 Жыл бұрын

Put out lime pellets and it will keep the moles out for about six months

@jeremyrathbun3601 Жыл бұрын

Try teng tools very nice set up.

@michaelburdosh6431 Жыл бұрын

You might want to try Harbor Freight If you have one in your area for a tool chest & tools

@GoodWorksTractors Жыл бұрын

Yeah, I did stop in and check those out. Definitely in the running.

@romandeweese370 Жыл бұрын

Which top link did you get for the summit? I clicked the link and it brought up multiples. Trying to figure out which one I need.

@GoodWorksTractors Жыл бұрын

This is the specific one I bought for the Summit. www.amazon.com/dp/B08JF66Y7N?linkCode=ssc&tag=onamzgwt07-20&creativeASIN=B08JF66Y7N&asc_item-id=amzn1.ideas.46M6Z6OWPONU&ref_=aip_sf_list_spv_ofs_mixed_d_asin

@romandeweese370 Жыл бұрын

@@GoodWorksTractors thank you for your help.

@trm64 4 ай бұрын

Thanks for that specific link...just ordered it for my Summit

@GoodWorksTractors Жыл бұрын

Find all of the stuff in this video in our Amazon store! www.amazon.com/shop/goodworkstractors LOOK AT OUR MOST POPULAR ATTACHMENTS! Speeco Quick Hitch: bit.ly/3NFC0yl Stump Wrecker: bit.ly/3WYa6Tf VersaBracket Combo: bit.ly/3wUPrnl Snow Pusher: bit.ly/3NB4BVw Tillers: bit.ly/3GT1kk1 Core Plug Aerators: bit.ly/3W0R25q Pallet Forks: bit.ly/38wRztu Grapples: bit.ly/3PNNYaZ Dethatcher: bit.ly/3GT9Zmk Tractor Canopy: bit.ly/3IHcvNU WANT TO SAVE MONEY? CHECK OUT THE GWT DISCOUNT CLUB! Use code GWT at any of the vendors below and you will save cold hard cash :) I will also get a commission for the sale, so it's a win-win-win! USE CODE "GWT" TO SAVE BIG WITH: BUCKET BRACKETS @ www.jufabworks.com CUSTOM GRILL GUARDS @ www.5elevendesignz.com PTO QUICK ATTACH @ tractorptolink.com DIY HYDRAULIC SOLUTIONS @ www.summit-hydraulics.com GAME CHANGING GREASING SYSTEMS @ www.lube-shuttle.us/store TIRE CHAINS @ www.tirechainsonline.com PREVENT FLAT TIRES @ www.multiseal.us CULTIPACKERS & CRIMPERS @ www.packermaxx.com ALL OEM JOHN DEERE PARTS @ www.247parts.com ACCESSORIES AND BACKHOE BUCKETS @ www.muddscustoms.com CUSTOM TRACTOR FLOORMATS @ www.tractormat.com PROTECT, ORGANIZE, IDENTIFY HOSES @ www.outbackwrap.com BOX BLADES FOR ATV'S @ www.northwoodsfabrication.com HYDRAULIC SYSTEM PROTECTION @ www.hoseendchamer.com DUMP FROM THE SEAT MATERIAL COLLECTION SYSTEMS @ www.proteroinc.com POWERED SWEEPERS SWEEP UP ANYTHING @ www.sweep-all.com EASY WHEEL TOP LINK HANDLE @ www.tractoraftermarket.com TIRES, WHEELS, AND DUAL ADAPTERS @ www.millertire.com AMERICAN MADE CARRY ALL ON STEROIDS @ http:www.bigtoolrack.com THE BEST TOOTHBAR AND MORE @ www.heavyhitch.com 5% OFF WITH CODE GWT AT TRAC SEATS! www.tracseats.com SHOP: www.goodworkstractors.com AMAZON: www.amazon.com/shop/goodworkstractors SUBSCRIBE: kzfaq.info LIKE: facebook.com/goodworkstrac... FOLLOW: instagram.com/goodworkstra... MERCHANDISE: stores.inksoft.com/good_works_tractors_merch/shop/home *Discount codes cannot be combined with any other promotions, offers, or deals! **I choose to sell some products through 3rd parties instead of stocking items myself. Know that I will receive a commission if you choose to purchase through certain links. Thank you very much for your support! This video is for entertainment purposes only. Good Works Tractors (Good Works Lawn & Power, LLC) cannot be held responsible for content found in any video. Always reference your owners manuals, use extreme caution, and proceed at your own risk.

@firemanj35 Жыл бұрын

Cornwall has beautiful tool chests, but on the price side. 😂😂😂😂 no fittings were hurt in the making of this video. Relax all you motor heads.

@GoodWorksTractors Жыл бұрын

Thank you. I haven't heard of them before. Will look into it.

@lazor1111 Жыл бұрын

what gear oil for the front axel? for the hydrostat trans? on the summit

@Lazy-F-Acres Жыл бұрын

2.7 liters of Total Dynatrans MP/API: GL-5

@tedheiser2141 Жыл бұрын

Tool Vault Elite It is like pro box but good price

@keithstickan6486 Жыл бұрын

You will find it now that you bought a new one. That's how it works for me.

@GoodWorksTractors Жыл бұрын

Haha, definitely. That's how it always goes!

@h.w.kueckelhan2322 Жыл бұрын

So which of the seven top links shown is the right one for the Summit tractor?

@GoodWorksTractors Жыл бұрын

www.amazon.com/dp/B08JF66Y7N?linkCode=ssc&tag=onamzgwt07-20&creativeASIN=B08JF66Y7N&asc_item-id=amzn1.ideas.46M6Z6OWPONU&ref_=aip_sf_list_spv_ofs_mixed_d_asin

@deanfrancis6474 Жыл бұрын

Gearwrench tool sets

@sunseeker6088 Жыл бұрын

I need a Summit Tractor 🚜

@GoodWorksTractors Жыл бұрын

Expansion plans this year for Summit

@trm64 4 ай бұрын

I like mine. Had it for a year. Bought pallet forks, stump bucket, quick attach for 3 point, hydraulic top link, 6' bush hog. It's great. 😊

@alhorn4836 Жыл бұрын

Courtney what is your honest opinion of summit tractor i'm looking to buy one soon i have a rural king 19 right now

@Lazy-F-Acres Жыл бұрын

You weren’t asking me, but figured I’d chime in. I bought one about 3 months ago, along with a 5’ brush hog, 5’ box blade and a post hole digger and it’s been the best purchase made in a long time. Added a hydraulic top link about one month after buying it, which was awesome. I use it to maintain 10+ acres and it’s constantly getting use. I’m just over 50 hours now and no issues at all. Definitely recommend.

@gregritter377 Жыл бұрын

Take it off and turn it over you got it on their upside down

@natekelsi Жыл бұрын

Do you have a link for that toolbox you have on the Summit tractor

@Lazy-F-Acres Жыл бұрын

Those come standard on the tractor, but I’m sure you could find one separately. I actually swapped mine out with a bigger steel box since the plastic one was a bit small

@natekelsi Жыл бұрын

@@Lazy-F-Acres My Summit tractor did not come with one.

@Lazy-F-Acres Жыл бұрын

@@natekelsi now that’s odd…

@alhorn4836 Жыл бұрын

you might want to check the air in those balls they sound a little flat

@GoodWorksTractors Жыл бұрын

We use an echo reducer for audio. That might affect the sound a touch. They are at the right psi :)

@sgtaaronp Жыл бұрын

I work for a company that does racking if you want a custom solution!

@GoodWorksTractors Жыл бұрын

Thanks Aaron. Hoping I'm all done with racking for now, but time will tell!

@weeway2007 Жыл бұрын

If you're not a professional mechanic or don't plan on becoming one why spend so much on tools go to harbor freight and buy general tools a general wrench will loosen up a bolt just as easy as a snap on or husky.

@pavelkolp Жыл бұрын

Don’t buy a 1000pc tool kit, half of it is useless garbage. Go to Harbor Freight and get a US General or Icon tool chest. And buy smaller sets and build out your tool chest to your liking.

@Geewillickerz Жыл бұрын

You installed the hose fittings wrong.

@GoodWorksTractors Жыл бұрын

I'm aware, I learned something new :)

@aidenhouse1135 Жыл бұрын

go trekton got a lifetime warranty

@cohenmason3949 Жыл бұрын

If you are selling your 4720 can you ask me first

@sgtaaronp Жыл бұрын

Tektron tools

@GoodWorksTractors Жыл бұрын

Yeah, I did check them out. Pricey buggers though!

@tedhardulak7698 Жыл бұрын

Is there ANYTHING in advertising that is not a "Game Changer"? There needs to be a new "Catch Phrase" .

@GoodWorksTractors Жыл бұрын

If you come up with it, then I bet it’ll be a real game changer!

@tedhardulak7698 Жыл бұрын

EXCELLENT!! I will consider it and let you know. I I ran Kubotas at a commercial level for many years. I was even on their prototype program because I gave them so many ideas to improve products. Now I regeret I did this for free and did not patent so many ideas. I like you your channel. Blessings!!