Adding 12 inch golf cart wheels to my smoker. 12 inch Trex Mavericks in metallic bronze. www.golfcarttiresupply.com/12... Reese hitches: hubs and spindals www.reesehitches.com/search?q...
Пікірлер: 43
@spenjackson6 ай бұрын
Thank you for sharing your knowledge!! I’ve been trying to figure out how to go about adding golf cart wheels to my offset and your videos have answered a lot of my questions!!
@marvhill3016 ай бұрын
Glad I could be of help. Thanks for watching.
@cheffsolo77396 ай бұрын
So true, you help me out. Also, thanks again for the video and nice-looking grills
@marvhill3016 ай бұрын
@@cheffsolo7739 thanks for watching.
@jasonamccrory2 жыл бұрын
Thanks for posting this video. I'm getting ready to install some golf cart wheels on my beast as well so I can move it out back. Great work!
@marvhill3012 жыл бұрын
Good luck with your build. I'm not a wealth of knowledge but what little I have, I do share if you have any questions.
@jasonamccrory2 жыл бұрын
@@marvhill301 Thanks I appreciate it! The links to parts were a big help to get me started. I'll get going on it in the next month or two.
@anthonyroelofs47002 жыл бұрын
excellent video I want to add this to my smoker.
@marvhill3012 жыл бұрын
Good luck with your build.
@scottwebb9518 Жыл бұрын
Hey Marv, Just wanted to say I thoroughly enjoyed your build and you’ve evidently done quite a bit of homework. I’ve been going back and forth on the best, “but cheapest”, route to building a rear axle and a steerable linkage axle for the front. I really like your idea and its well suited for my application. Would you mind sending me a part’s list and measurements you used for your build, it would be greatly appreciated. Thank you for your consideration.
@marvhill301 Жыл бұрын
Thanks for watching Scott. I purchased all the axle parts from reesehitches.com. did a quick search and their website seems to be down. But I used 2 pairs of 4-bolt on 4 inch hub assemblies with a 1 inch square shaft and 1 inch straighr spindle. These were for the front and rear axles. Then i purchased a single 4-bolt on 4 inch hub assembly, again with square shaft and 1 inch straight spindle. The assemblies came with bearing and castle nuts. The single assembly is for the steering mechanism. This link should take you to their website: www.reese-hitches.com/products/Pair_Of_4_Bolt_on_4_Inch_Hub_AssemblyBearings,AKSQ-200044 I used square tube for the actual axle tube which i believe is 2 inches.the axles are approx 32.5 inches in length. Hope this helps and good luck with your build. Happy to help if you have more questions.
@marvhill301 Жыл бұрын
The axle tubes are approx 31.5 inches long and with total width from outside of tire to outside of tire is 48 inches. Thanks for watching.
@CoreyTrevor_2 жыл бұрын
Nice! I just got passed down a homemade smoker heavy as hell and thick pipe all around, so it’s very hard to move gonna put some wheels on my smoker first before anything else
@marvhill3012 жыл бұрын
Thanks. Good luck with yours
@tonyrollin402 Жыл бұрын
So you did a super job building the off road package for you smoker would you be interested in building a cart for my smoker I have a assassin 28 the tall one I need the big wheels to move it easy I can only keep it in one spot in my yard I do need to cart built longer than the smoke but we can get into all that later let me know
@marvhill301 Жыл бұрын
Sorry for the late reply, just seeing your message. Are you local in new jersey?
@streetkombat111 ай бұрын
What size wheel and tire did you use? Looks awesome!
@louijaimes42882 жыл бұрын
Does the front axle have a gap between the frame. Or is the smoker frame sitting on the axle. Love this.
@kylesmith70613 жыл бұрын
Where did you get the hubs and spindles I would like to do that to my cooker thanks
@patg67072 жыл бұрын
Good looking smoker only thing i dont really care for on any smoker is the counter balance...no need for for it in my opinion but other than that looks good! Not sure if the heat from fire box will damage back tires??? They look pretty close to fire box...on my lang deluxe hybrid i have the big trailer tires and lang built heat blockers as a guard for the tires,might be something to consider doing on yours?
@marvhill3012 жыл бұрын
I really didnt want to put a counter balance weight on mine. Dont care for the look either but i found it too difficult to one hand the lid open when carrying food in the other. As for to rear wheels, there is approx 4 inches between firebox and tires. They become warm to the touch and hopefully won't be damaged from the heat. I would like to see the heat blocker setup you have. My though was anything made of steel would just get hot anyway. Thanks for watching.
@patg67072 жыл бұрын
@@marvhill301 do u have an instagram page where i could send u pics of the heat blockers for the tires?
@marvhill3012 жыл бұрын
@@patg6707 yes. I think it is themadangler
@rtdatan Жыл бұрын
Nice work. In regards to the metal tubing for the spindles, how many inches did you decide go with and what was the total width tire to tire?
@marvhill301 Жыл бұрын
The axle tubes are approx 31.5 inches long and with total width from outside of tire to outside of tire is 48 inches. Thanks for watching.
@OOMAN3 жыл бұрын
Thanks for sharing the link to the hubs. I'm thinking if I can't find the swivel casters, I might just buy the wheels only, like I put on the back of mine, and one of those spindles/hubs, and fab the front end axle like the back and put that on the hub. Thanks for the idea! I actually recently bought a 5th wheel hitch from Reese hitches.
@tonyrollin4022 жыл бұрын
Hi can you share the link for the hub and spindle with me I'm trying to build a cart for my smoker as well
@brianberry61233 жыл бұрын
Looks really good, what was your overall width from outside tire to outside tire also what do you think is the total weight of your smoker? I believe mine when finish will be around 1600 lbs give or take. I am wondering if those tires will handle that weight.
@brianberry61233 жыл бұрын
@@marvhill301 thank you, I have a gate opening of 39 inches. I probably need to go with a thinner tire or just cook in the front yard and keep it in the garage. But I don't think my wife will like in the garage. The next option is to build a trailer.
@brianberry61233 жыл бұрын
@@marvhill301 that would work if there was any room. Small yards in my neighborhood.
@JohnLopez-jt1cj3 жыл бұрын
You gotta put the center cap from the inside of the rim first then put the tires on
@alanbalcom9654 Жыл бұрын
Have you had any issues with the firebox getting hot and creating an issue with the wheels? Heat wise?
@marvhill301 Жыл бұрын
Thanks for watching. No issues with thr heat to the tires this far. There is about 6 inches between the firebox and tires.
@tonyrollin4022 жыл бұрын
Sorry about that did you build those spindles yourself or axles that went onto the spindles I'm trying to do the same thing to my smoker and I don't know where to buy any of that stuff can you help
@marvhill3012 жыл бұрын
www.reesehitches.com/products/Pair_Of_4_Bolt_on_4_Inch_Hub_AssemblyBearings,AKSQ-200044 This is what i used. I built them using square tube that i was able to slide the axels into.
@tonyrollin4022 жыл бұрын
Thank you so much 👍
@1jrdz Жыл бұрын
What kind of brand hubs are those ?
@marvhill301 Жыл бұрын
The 4 bolt on 4 inch hub assemblies were purchased online from reesehitches.com
@tonyrollin4022 жыл бұрын
Hi good evening did you build those
@marvhill3012 жыл бұрын
Yes i did.
@marvhill3012 жыл бұрын
I assume you are referring to the axels
@tonyrollin4022 жыл бұрын
Yes
@timothyfoster75643 жыл бұрын
take to long in wiping your hands when your waring gloves you are not going to use them agin are you?