ADDING OIL TO BIZTER COMPRESSOR
Рет қаралды 5,703
2 жыл бұрынBitzer semi hermetic compressor oil level , oil safety switch will trip if oil level is low and you must add oil , there’s a manual reset on the oil pressure switch you must push the button on top of switch to reset, here you will see when to add, how much oil to add and how to add oil
#hvac #d2dnyac
@keovongvilaykeo4799 2 жыл бұрын
Always great content thanks you again keeps up 🙏👍
@D2DNYAC 2 жыл бұрын
Thank you for watching my friend
@maheradous9257 8 ай бұрын
Good job
@D2DNYAC 8 ай бұрын
Thanks
@wd8557 2 жыл бұрын
Nice to see that access T for the oil. If it had that normal bolt , Ill add in oil via the suction line, just because I have broken the heads off of them bolts.
@Aj-cd1in 2 жыл бұрын
Great tips thanks i appreciate it
@D2DNYAC 2 жыл бұрын
Thanks for watching
@jaykesapalaran5434 Жыл бұрын
Thank you for sharing you knowledge..keep safe and god bless . Please make more tutorial videos all about that system
@D2DNYAC Жыл бұрын
Thanks for watching
@keovongvilaykeo4799 2 жыл бұрын
Hey you should come up D2D hat or T-shirt .
@GREATTECH1 2 ай бұрын
Do you close the king valves before draining old oil out? Won't refrigerant come out as well when draining the oil? Please make video about draining old oil out.
@D2DNYAC 2 ай бұрын
I would control the system pressure with the valves and use the system pressures to push out most of the oil , if you need to remove every last drop these compressors usually have a bong at the bottom or you may have to disconnect and physically tip it
@globaltecnicianworldsbest3031 2 жыл бұрын
The reset switch location?
@D2DNYAC 2 жыл бұрын
On top oil switch
@Aj-cd1in 2 жыл бұрын
So for the hermetic compressor, since you didn’t know what oil to put in the compressor you reached out to the manufacture of the chiller correct & not the manufacture of the compressor
@Aj-cd1in 2 жыл бұрын
I mean For the semi hermetic compressor ** not the hermetic
@D2DNYAC 2 жыл бұрын
Typically you will find oil information on the compressor name plate, now you can also call the equipment (unit) manufacturer for that information , the compressor manufacturer can also help !
@thesilentonevictor 2 жыл бұрын
That is an oil sideglass not a plug you have to put the flash light on it to see the oil
@D2DNYAC 2 жыл бұрын
Really I will check next time I am on site ! thanks for watching
@RJMaker 2 жыл бұрын
Yep, sometime they get painted over.
Gendron HVAC-R
Рет қаралды 17 М.
Infinity Circus
Рет қаралды 7 МЛН
FixIT
Рет қаралды 88 М.
AC And R World
Рет қаралды 2,6 М.
Jamal Badhafari باظفاري
Рет қаралды 448 М.
Jason Derulo
Рет қаралды 33 МЛН