By the way I used the cheap black stepper motors for the test. I have a few laying in a junk box I use whenever I am messing with the test boards I have laying around.I save the black steppers and x25s from repairs to use for freebie repairs and testing. Never for official repairs. I will probably start filming the new copy of Odometer correction soon.

Thanks for this. Used these directions and your programming tool to add this to my truck. I have a 2004 Yukon XL for the Canadian market, so when I went in the bit was originally 21. I changed it to 20 and it works. I also took the time to replace the burnt out lights with new ones from Mouser Electronics, part number 560-ESM1EW10YLW.

Great Video ! I have a 2003 Suburban Z71 that has "0" working gauges now. I need to go in and replace ALL gauge motors and 2 or 3 lights, so I have nice project for a few days since we can't really travel right now ; ). Glad someone was able to ID '03 as already flashed for Transmission Temp, I was wanting to do that upgrade, and now I know I can...and with minimal additional effort. New subscriber now, Thanks again !

I emailed you about reprogramming my 05 cluster.

I really appreciate this. I wish your amazon links were still working. I need to rebuild my '05 gauges that are mostly dead and want to upgrade mine with the trans cooler on the stock board.

And emailed you man. And wrote on Facebook. I'd love to get trans temp programmed in my cluster. I was gonna buy the rebuild kit and was gonna get the 7 steppers.

Nice job!

I remember when these were new this was a popular to replace the cluster to add this. Dealers would stock them.

I also wanted to ask you another question. I have a 2004 Trailblazer. I just noticed my trip button is not working. I push it in and it does not change from odometer to any other function. I'm assuming trip is the only function it has. Anyway when I turn the key to the on position it shows trip and has 88888888 all 8s then switches to odometer as it goes thru its normal functions when you first start the car, Or key on engine off. I did try holding the button for 30 seconds and still the display never changes from the odometer reading. Any ideas? At this point I have never had the cluster apart but who knows whats been done previously. The previous owner told me it was a new exchange cluster because his had some issues. Healso toldme it had about 30,000 more miles on it when he got it so I plan on turning it back.

What about manual clusters? I understand 03-04 clusters have trans temp senders and temp gauges enabled (but not installed) Are there differences in flashing? Does a sender have to be installed and wired?

Excellent video, I've already ordered all the parts I need to build this. Thank you very much for sharing! Is it the same process to enable the Drivers Information Center on the cluster too, or do you have to have the information from another cluster that already had it enabled?

Hey, I found your channel and have been binge watching all your gm cluster videos. Great stuff!!! I am going to try and make an arduino programmer from your tutorial. I have a weird situation; I have an '05 tahoe that I bought used, but I do not suspect the cluster is original. It shows a perpetual SRS airbag warning but when I scan for SRS codes from the computer it shows none. I have read that this could be caused from a different year cluster installed in the 05. Is the SRS alarm programmed into the cluster prom chip? I am wanting to rebuild my cluster with new steppers, led's, prndl lighting, and adding trans temp. If the cluster in mine is a different year, would I program it as an 05 or as whatever year the cluster actually is?

Do you add the transmission gauge if clusters are sent out to you? And if so at what cost

Will it work just to replace the Eprom with a 7 dail eprom form a other cluster ?

How does one go about building the power supply for checking everything out on the cluster on your desk? I understand this is the best way to calibrate the needles before reinstalling and I’d like to do this. I’m considering going to a junkyard and clipping the harness I just need to understand the wiring behind it.

Are you able to post a 03/04 Silverado cluster bin with steering controls?

Have you ever seen the Instrument Cluster be the reason for the door ajar pop up?

Just picked up a 2005 silverado 2500 HD with steering controls and no Trans temp gauge. Happy to share Bin if you need it. date code says 9/2004. After reading the bin I'm thinking i have a 2004 Gauge cluster. No trans temp gauge so I'm adding one. Line 00000050 - 9C 89 7D 70 05 76 00 00 A5 01 00 00 00 00 00 00 . You mentioned in this video if I had the A5 code and in this case 01 is no gauge I need to change to 00 just confirming or has this changed?

Greetings, I do everything as on your video, and connect according to the scheme, but only 000000 are read (what am I doing wrong?the only difference is I have a MEGA 2560

What’s the pin for the transmission wire?

Do you sell this service? What's your website?

I have an 05 suburban that had 01. After installing a stepper motor I had nothing. I reprogrammed it to the 42 and still nothing. Could I have installed the wrong stepper motor? are there different ones?

How do you program it. I have a tech2

How do you reflash a instrument cluster to have steering wheel controls?

On different clusters I read the file and after the A7 or A6 its just random numbers and not one off the numbers that you are showing . For example one that has a working trans gauge reads Line 00000050 - 5B 60 88 96 A6 03 00 00 A7 28 00 01 00 00 00 00

do you know which pins from the ecm are the ones to set the gear selector on each gear?

How much to mail you a cluster and have you do this and add the blue LED bulb behind it?

So I ordered a chip from Jeff. He sent me one that is suppose to be programmed for 2007 silverado classic . I bought the tl866 II plus and the tachosoft software. I just read the bin, miles and hrs all match up to what I've learned from watching your video's but the Trans doesn't match up to what your telling me here on your video so please help. I have A6 8A did he write it wrong? I haven't removed mine from my cluster to read it yet. I did tell him I had trans gauge.

can you show us how to change engine hours. Just bought a gauge from junk yard . needs to read 2500 hrs

How much would you charge to do this to a 2006 guage cluster?

I read somewhere that the eeprom to program for trans temp on 03/04 is actually the one near prndl. Is that true?

How can you tell if your 04 is pre programed for it?

Hey man, I sent you an email about a cluster repair.

How can I make a trans temp bench tester myself

Are you in Valdosta ga ?

Any chance I can send you my cluster to flash my eprom

what kind of programmer are you using to send signals to the motors like when you asked for the trans temp hot